1. No category

5th B. Broberg Symposium on Mechanics of Materials
24th and 25th of August 2015
Blekinge Institute of Technology, Karlskrona, Sweden
DAY 1
10:00 –
10:30
Reception and coffee
10:30–
11:00
Invited talk
J1650
"The Elastodynamics of Defects: Dislocations and Expanding
Eshelby Inclusions"
XANTHIPPI MARKENSCOFF
Distinguished Professor, Department of Mechanical and Aerospace
Engineering, University of California
11:00–
11:20
“Some aspects of crack propagation in rubber”
11:20–
11:40
“Some aspects of cohesive zone modelling of mixed mode fracture in
orthotropic solids”
MARTIN KROON
Malmö University, Sweden
SVANTE ALFREDSSON
University of Skövde, Sweden
11:40–
12:00
“A constitutive model of the mechanical response for highly
anisotropic fibrous materials”
ERIC BORGQVIST
Division of Solid Mechanics, Lund University, Sweden
11:5013:00
Lunch
13:0013:30
Invited talk
J1650
J1650
J1650
J1650
Bistro J
"PCD and PCBN with Tailored Properties: A Multi-scale
Experimental and Numerical Study"
NEAL MURPHY
Mechanical & Materials Engineering, University College of Dublin, Ireland
J1650
13:3013:50
“Experiments and numerical prediction of the microstructure of
glassy polymers”
JONAS ENGQVIST
Faculty of Engineering, LTH, Sweden
13:5014:10
“Defect induced phase transformation”
14:1014:30
“On experimental determination of mixed mode cohesive laws from
a potential function”
CHRISTINA BJERKÉN
Malmö University, Sweden
BENT F. SØRENSEN
Professor, Technical University of Denmark, Department of Wind Energy,
Section of Composites and Materials Mechanics
14:3014:50
“Modeling of stress induced hydride formation near crack tip”
14:5015:40
Coffee break (life of Bertram Broberg)
ANNE BUTTIMER
15:4016:00
“Paperboard fracture”
16:0016:20
“A Multiphase-field Model Simulating the Growth of Intermetallic
compounds; Towards a Model for Tin Whiskers”
REHEMAN WUREGULI
Division of Solid Mechanics Lund University / LTH, Sweden
JOHAN TRYDING
Tetra Pak, Lund, Sweden
JOHAN HEKTOR
LTH, Sweden
16:2016:40
“The toughness of hybrid rubber-graphene modified structural
epoxies”
DECLAN CAROLAN
Imperial College London, England
16:4017:00
“Relationship between CMOD and Dynamic Fracture Criterian”
19:00-
Dinner
SHARON KAO-WALTER
Blekinge Institute of Technology, Sweden
J1650
J1650
J1650
J1650
Bistro J
J1650
J1650
J1650
J1650
Scandic Hotel
DAY 2
09:3010:00
Invited talk
"How thermo-mechanics and hydrology limit the extent of great
mode III creep fractures along the base of Antarctic ice streams"
JAMES R. RICE
Mallinckrodt Professor of Engineering Sciences and Geophysics, Department
of Earth and Planetary Sciences and Division of Engineering and Applied
Sciences, Harvard University.
10:0010:30
Coffee break (and video about Prof. Bertram Broberg)
10:3010:50
“Indendtation at the atomic scale”
10:5011:10
“Enabiling realistic simulations”
11:1011:30
“Formation and growth of hydrides – a phase field model”
11:5013:00
Lunch
13:0016:00
Marin Museum or Aspö
J1650
J1650
SOLVEIG MELIN
Lund University, Sweden
ESKIL ANDREASSON
Tetra Pak, Lund, Sweden
PER STÅHLE
Lund University, Sweden
J1650
J1650
J1650
Skeppsgossen
Marinmuseum
Useful information:
Taxi number +8645519100, the community buss Nr.1 to the bus stop “Högskolan Gräsvik” which is just in
front of the Campus. Notice that it will take about 10 minutes by buss and there will be one buss in each 10
minutes.
One person will meet you up in the reception at Scandic hotel in the morning of the 24/8 at 9:20 and 25/8 at
9.00.
The BTH reception is in building A, they can help you with parking permission, or tell you the right way to
building J (See the picture below).