Receives Full Ka-Band 17.30-22.00 GHz simultaneously

SMW Ka Quad/Triple/Dual Band System
ReceivesFullKa-Band
17.30-22.00GHzsimultaneously
The Ka Band System consists Ka LNA Wideband, Ka splitters, Ka BDC’s and
matched Ka cables. Comes standard with Low Phase Noise to meet DVB-S2X
Professional services.
Options include customized LO’s, customized frequency ranges, customized gain,
separate DC power input and separate input for the external 10 MHz reference.
All parts are optimized, adjusted, matched and tested as one complete unit.
Quality and long term reliability is also essential. The system is therefore tested
according to a very extensive test program, which includes heating, cooling, waterproof testing and rigorous electrical testing.
Swedish Microwave was founded 1986 and is today a leading manufacturer of
professional LNBs (Low Noise Block converters). The company is located in Motala
Sweden, and to date the products are installed in more than 122 countries.
All work is in-house allowing custom-design products, short delivery times, high
flexibility, quick service and support.
Swedish Microwave AB | Dynamovägen 5 | 591 61 Motala | SWEDEN | Tel. +46 141 216135 | Fax. +46 141 215224 | [email protected] | www.smw.se
SPECIFICATION SMW Ka Quad/Triple/Dual Band System
SMW Quad Band System 17.30-22.00 GHz
Frequency range
LO frequency
IF
LO 16.35 GHz
17.30-18.50 GHz
16.35 GHz
950-2150 MHz
LO 17.55 GHz
18.50-19.70 GHz
17.75 GHz
950-2150 MHz
LO 18.75 GHz
19.70-20.90 GHz
18.75 GHz
950-2150 MHz
SMW Triple Band System 17.70-21.20 GHz
Frequency range
LO frequency
IF
LO 16.75 GHz
17.70-18.90 GHz
16.75 GHz
950-2150 MHz
LO 17.95 GHz
18.90-20.10 GHz
17.95 GHz
950-2150 MHz
LO 19.15 GHz
20.10-21.20 GHz
19.15 GHz
950-2050 MHz
General specification
Gain nominal
Gain flatness within 30 MHz max.
Gain flatness over each band max.
Gain variation from nominal value max.
Noise Figure, typ.
LO Phase noise typ.
LO leakage RF input
Image rejection
P1dB typ.
IP3 typ.
Input LNA
Input BDC
Output (waterproof)
Input VSWR
Output VSWR
Operating temperature
Storage temperature
Dimensions BDC F-connector
N-connector
Weight
DC BDC
Power typ. BDC
DC power LNA
Power consumption LNA
Dimensions
Weight
Internal reference
LO stability
60 dB / custom made
±0.4 dB
±2 dB
±4dB
2 dB
-40 dBc @ 10 Hz
-65 dBc @ 100 Hz
-85 dBc @ 1 kHz
-90 dBc @ 10 kHz
-95 dBc @ 100 kHz
-112 dBc @ >1 MHz
-60 dBm
30 dB min
+15 dBm
+25 dBm
WR 42 (Flange PBR220, M3 threaded mounting holes)
SMA
F-connector 75 ohm,
N-connector 50 ohm or
SMA-connector 50 ohm
2.3:1 typ. (option 1.5:1 with isolator)
2.1:1 typ.
-40 to +80°C
-40 to +80°C
155 x 80 x 44 mm
161 x 80 x 44 mm
399 g (F- & SMA-connector)
418 g (N-connector)
+12 to +24 VDC (LO 18.75 GHz +13 to +24 VDC)
5W
10-26V / 110 mA typ. via one of the RF output connectors or via sep. SMA-connector (bottom side)
@12V- 1.32W, @24V-2.64W
77 x 46 x 34 mm
124 g
±1 ppm -40° to +60°C (±1.5 ppm -40° to +80°C) or
±2.5 ppm -40° to +60°C (±3.5 ppm -40° to +80°C)
Long term LO stability over all conditions
LO Stability ±1 ppm
LO Stability ±2.5 ppm
External 10 MHz reference
LO stability
External reference input frequency
External reference input power
External reference input port
Options
LO 19.95 GHz
20.90-22.00 GHz
19.95 GHz
950-2050 MHz
±3 ppm
±6 ppm
Depend on the external reference
10 MHz
-15 to +5 dBm
Output IF connector.
Option via sep. connector (SMA, N or F)
Separate DC power input (SMA, N or F)
Customized gain and variation
Customized LO frequency and frequency ranges
Separate input connector for the ext. 10 MHz ref.
The standard Quad system consists of:
1 pc Ka-Band LNA Dual Output SMA
2 pcs Ka-Band splitters
6 pcs Ka-Band SMA-cables length 1.5 m
4 pcs BDC’s
1 pc DC cable from Low band BDC to LNA 3.3 m
Specifications are subject to change without notice. General terms Orgalime S 2012. Products from Swedish Microwave AB are made for commercial use.
2015-03-04
Dynamovägen 5 | 591 61 Motala | SWEDEN | Tel. +46 141 216135 | Fax. +46 141 215224 | [email protected] | www.smw.se