1. business and industrial
2. construction

Product Catalogue
Improving choice, quality and service
Welcome
Welcome to the Miers Construction Products Catalogue.
Miers Construction Products is an independent supplier
of construction products delivering from a number
of locations across the UK.
We aim to provide our customers with a ‘single source’
connection to supplies, products and technology. We are
dedicated in our efforts to become a valuable supplier/partner
by providing products and services that outperform all standards
and expectations and offering unparalleled service through
dedicated employees whom are committed to being the best
in our industry.
Goals:
n To be the most important and valued supplier to
our customers.
n To build relationships with our customers and suppliers based
upon trust and respect.
n To build a reputation that will expand our business through
our principles and commitment to our customers.
n To provide new products, technologies and innovative ideas
that change and improve our customers efficiencies and
methods of construction.
Follow us on facebook
Follow us on twitter
Contents
Brickwork Products
Reinforcement Accessories
Including Concrete Frame Contractors Products
Formwork Products
Including Geoplast Formwork
Schöck Isokorb®
Balcony Connectors and
Thermal Bridging Solutions Systems
Grouts, Chemicals and Sealants
Joint Fillers
Ground and Slab
Including Visqueen Manufactured Products
Concrete Testing
Reinforcement Connections
Waterproofing and Gas Proofing
Index by Section
2-18
19-30
31-40
41-48
49-54
55-58
59-70
71-72
73-74
75-78
79-81
1
Brickwork Products
2
Brickwork Products
Visqueen Zedex CPT DPC
Zedex Housing Grade DPC
Visqueen Zedex CPT high
performance DPC & cavity tray
system is manufactured from
co-polymer thermoplastic
(CPT) providing all the
characteristics necessary for
it to perform effectively for
the lifetime of the building in
which it is incorporated.
Zedex Housing Grade DPC
is suitable for housing
construction up to three storeys
and out performs all other
flexible DPCs. It is strong and
puncture resistant, also with
excellent workability in winter
conditions.
Width Length m2/Roll
(mm)
(m)
100
20
2
150
20
3
225
20
4.5
300
20
6
450
20
9
600
20
12
900
20
18
1000
20
20
Width Length m2/Roll
(mm) (m)
100
150
225
300
450
600
900
30
30
30
30
30
30
30
3
4.5
6.75
9
13.50
18
27
Anderson Monarflex Nubit DPC
A very robust, pliable DPC with a high bitumen
content on a polyester base exceeding the
requirements of BS6398 Type A.
Advantages
Sizes
Surface Finish Sand finished surface, both sides
•Suitable for residential, commercial or
industrial projects
•Preferred use: Horizontal ground DPC or
cavity tray
•Can be torch applied horizontally or vertically
Roll Length
Roll Width
Thickness
Toughsheet Polythene DPC
Insulated DPC
Advantages
Polythene DPC which
conforms to BS6515,
providing a cost effective
and durable DPC.
•Closes off cavities
around window
and door openings
with cut blocks
•Easy to install
•Prevents cold bridging
•Exceeds minimum requirement of
0.45 W/mk provided the window is
set back 30mm
•Polyethylene insulation
Pic To Come
Width Length m /Roll
(mm)
(m)
2
100
150
225
300
450
600
900
30
30
30
30
30
30
30
3
4.5
6.75
9
13.5
18
27
8m
100 - 1000mm
2mm
Sizes
17 x 100/165mm x 10m coil, 6 per pack
toughsheet
BUILDING PRODUCTS
s
17 x 140/225mm x 10m coil, 5 per pack
Non standard sizes available on request
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
e [email protected]
w www.miersconstructionproducts.co.uk
3
ARC DPC Products
n Party Wall DPC
Advantages
•Up to 4 hours fire integrity
•Suitable for cavities up to 300mm
•Complies to Robust Detail, Part E and NHBC standards
•Designed to be fitted as
brickwork progresses
•Also available for
horizontal applications
•Designed to be friction fitted
•Excellent acoustic properties
n Rockfibre Insulated DPC
Advantages
•Up to 4 hours fire integrity
•Easy to install
•Prevents cold bridging
•Meets the requirements of Part B and Part L
Sizes
75 x 260/340 x 1200mm, 8 per pack (75mm cavity)
100 x 260/340 x 1200mm, 6 per pack (100mm cavity)
125 x 260/340 x 1200mm, 4 per pack (125mm cavity)
150 x 260/340 x 1200mm, 4 per pack (150mm cavity)
340mm DPC width
Sizes
25 x 100/165 x 1200mm, 20 per pack
25 x 150/225 x 1200mm, 20 per pack
ARC Cavity Stop Socks & TCBs
Advantages
•Polythene encapsulated rockfibre cavity fire barrier
•Up to 4 hours fire integrity for masonry construction
•1 hour fire integrity for timber frame
•Suitable for cavities up to 300mm
•Complies to Robust Detail, Part B and
NHBC standards
•Designed for a compression fit
•Excellent acoustic properties
Sizes
Pack
Qty
mm
65 x 65 x 1200
90 x 75 x 1200
120 x 100 x 1200
135 x 120 x 1200
160 x 120 x 1200
Cavity
Size
40 (50mm cavity)
35 (75mm cavity)
20 (100mm cavity)
15 (125mm cavity)
5 (150mm cavity)
Non standard sizes
available on request
DPC Accessories
n DPC Fixing Strip
Sizes
25 x 3mm x 2m
Pack Qty
20
n DPC Fixing Pins
n DPC Jointing Tape
Sizes
Firtree fixings (for insulation)
Sizes
100mm x 15m
6 x 40mm Hammer fixings
100mm x 10m
50mm x 10m
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
4
e [email protected]
w www.miersconstructionproducts.co.uk
Brickwork Products
Thermabate Insulated Cavity Closers
Thermabate provides a simple and efficient
method of closing cavities around openings in
masonry walls. The insulating foam core prevents
thermal bridging, while the PVC-U box section
forms a positive damp proof barrier and key for
the direct application of plaster.
Accessories
•Flange Clip (green)
•Flange Ext Clip (white)
•Reveal Clip (white)
•Jointing Clip (blue)
•Profile Brackets
•Wall Fixing Ties (150)
It effectively prevents condensation, pattern
staining and mould growth frequently associated
with traditional methods of closing cavities.
Thermabates closes the cavities and avoids
problems encountered when supporting
traditional dpc’s and insulation boards
during construction.
Length
Width
(m)
T
(mm)
Colour
3000
210
210
210
210
210
210
50
65
75
85
90
100
brown
black
white
yellow
orange
green
(mm)
Advantages
•Continuous insulation
•Reduced heat loss
•Weather resistant
•BBA Certificate No. 91/2648
3000
3000
3000
3000
3000
Timloc Thermo-loc EPS Cavity-Closer
Sizes
Advantages
2.4m lengths
•Provides an effective DPC and thermal barrier between frame,
50 - 100mm, 5 lengths per pack
inner and outer wall leaf
100mm+ cavities available
•Exceeds the minimum thermal resistance path of 0.45m2K/W
stipulated in Robust Details ‘limited thermal bridging and air leakage’
•Rigid profile extrusion
•Integrated and flexible water strip to reduce air leakage
•Simple on-site trimming to cope with ‘rogue’ cavity widths
•Can be built in with PVC ties as brickwork progresses or simply nail to block
•BBA Approved
Timloc Everdry Cavity Tray
Advantages
Timloc Everdry adjustable stepped cavity
trays for brickwork are used for the
following applications.
•195mm high back upstand
•Adjustable upstand to cover
50mm – 110mm cavities
•Roof pitch marks on tray upstand to
give installation guidance
•Cavity tray builds to outer leaf
only to speed up installation and
allowing both inner and outer
leafs to be built independently
if required
•BBA approved
•At the abutment of a pitched roof with a
cavity wall
•On external walls – not exceeding
120mm thickness – built from standard
brickwork or similar sized components
with regular course heights, including
mortar of approx. 75mm
•On roof pitches of 25 degrees and above
•Cavity widths of between
50mm – 110mm
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
e [email protected]
w www.miersconstructionproducts.co.uk
5
Rytweep Weep Vent
An unobtrusive cavity weep
hole duct. Virtually unseen
when installed, showing
only the small weep outlet.
n Weep Vent
Sizes
101 x 66 x 10mm
Colours
Clear, Terracotta and Buff/Sand
Advantages
•Simple design for quick
and easy fitting with no
special brickwork required
•Flush face
•Lugs aid mortar adhesion
for efficient installation
• BBA approved
Airflow Dual Weep Vent
Units per box
200
n Tube
Advantages
•Extension for Rytweep
and to allow rendering
•Flush face
•cut to required size
Sizes
500 x 6mm
Units per box
50
Colours
Black, Brown, Buff, Terracotta, Clear,
Grey and White
Timloc Weep Vents
n Tunnel Weep Vent
n Cavity Wall Weep Vent Type 1143
Sizes
Pack sizes 50 per pack
Colours
Buff, Cream, Terracotta, White,
Grey and Black
Timloc Underfloor & Through Wall Venting
1203
High performance venting
may be used instead of a
conventional airbrick.
Available with a
range of attachments
Attachments
•Telescopic Under
Floor Vent
•Cavity Sleeve
•Horizontal Front Extension
•Vertical Extension Piece
•Duct Adapter
•Horizontal Rear Extension
1201
Upper half
1201AB
1204
1204
1205
S izes (Air Brick)
69 x 215 x 60mm
Available in a range of colours
1206
1201
Lower half
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
6
e [email protected]
w www.miersconstructionproducts.co.uk
Brickwork Products
Vista Housing Ties (Masonry/Masonry)
n Light Duty Housing Tie
n General Purpose Wall Tie
Multidrip feature to prevent moisture travelling
across the cavity. The design means that the
tie can be installed either way up.
Multidrip feature to prevent moisture
travelling across the cavity. The design
means that the tie can be installed
either way up.
Tested as Type A (sound)
Tested as Type B (sound)
Tested as Type 4 (strength)
to BS EN 845-1
Tested as Type 2
(strength) to BS EN 845-1
Sizes
Units per box
200mm
250
225mm
250
250mm (non BBA) 250
Sizes
Units per box
200mm
250
225mm
250
250mm (non BBA) 250
ACS Heavy Duty Ties (Masonry/Masonry)
n 2000 - Type 1 Heavy Duty
This tie has been designed to be used on buildings of any height within the UK. It can
be used in cavities up to 175mm. This tie meets and exceeds the requirements of a Type
1 tie as stated in DD140 : Part 2. The 2000 range tie has inherently strong sectional
properties due to its advanced design. The shape of the tie and a fine micro
coating ensures that moisture is not transmitted across the body of the tie.
The 2000 tie has embedment markings on the body of the tie.
This ensures that each tie is installed correctly and that you
no longer have to put your faith in the installer’s best
judgement. The tie is also marked with its size and
relevant part number to ensure that the correct
product is used in the correct location.
n 2100 - Heavy Duty
n 2200 - Heavy Duty
n 2300- Heavy Duty
n 2400 - Movement Tie
The ACS 2100 range tie is an
alternative to the tie above.
The ACS 2100 has a three hole
safe end pattern at each end,
a vertical twist positioned
centrally to prevent moisture
from travelling across the tie
and can be used in cavities of
50mm upwards.
The ACS 2200 range tie is
a variation on the 2100
tie where cavity
restrictions may
preclude the
use of a
vertical
twist.
The ACS 2300 range tie
is used predominantly in
collar joint applications
where there is no cavity,
however this tie may
be used in cavity wall
construction if moisture
and acoustic issues are not
a problem.
The ACS 2400 range tie
is used with a plastic debonding sleeve at movement
joint positions, and is
designed to resist lateral
loadings whilst still allowing
longitudinal expansion and
contraction of the masonry
panels. The de-bonding
sleeves should be installed
with a 10mm gap at the end
of the tie, and is achieved
with use of ACS’s ‘viewing
window’ in the end
of the sleeve.
The ACS 2200 wall tie has a drip
feature positioned centrally as
standard to prevent the transfer
of moisture across the cavity.
This tie is also suitable for thin
bed applications where the
mortar joint is less than 10mm
deep.
Although standard lengths are available from stock, bespoke lengths can be manufactured upon request.
Please contact ACS with your specific requirements.
The ACS 2100 tie is a made to order item, as this has been all but replaced by the more cost effective 2000 range tie.
inner strength in construction
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
e [email protected]
w www.miersconstructionproducts.co.uk
7
ACS Frame Cramps (Masonry/Steel or Concrete)
n 3000 - Universal Frame Cramp
A multi purpose conventional fixing cramp that incorporates a number of unique design features. This frame cramp has
a slotted upstand that provides the user with a vertical tolerance when fixing the product to a structure. This reduces
the likelihood of the cramp being bent on site to suit brickwork coursing.
Also the 3000 range frame cramp can be used with or without a debonding sleeve - negating the need for stocking
various different types of frame cramp.
The cramp has a multi drip feature that ensures a drip is positioned within the open cavity.
The shape of the product and the multi drip feature prevents moisture from crossing
the cavity. It is not necessary to stock or purchase different style frame
cramps of the same length.
This tie has been independently tested at Sheffield
University Civil and Structural Engineering
Department and results have shown that this
product is inherently stronger than the traditional
style cramp that is widely available in the market place at present.
Patent No. GB2376029
The performance of frame cramps is determined by the position of the fixing. At the
lowest point of the slot the frame cramp will have a safe working load of approximately
1.0kN. As the fixing position alters, the capacity of the tie will reduce. ACS recommends
using oversize washers with the fixing when installing cramps with a vertical slot.
Sizes
Stocked from 75mm – 250mm
(In 25mm increments) as standard
n 3200 – Safe Ended Frame Cramp with Drip Feature
The ACS 3200 range frame cramps are designed for use in either conventional or thin bed joints and
are available in a variety of lengths to suit most applications.
These ties are supplied with a 3-holed safety end for bonding into the mortar, a drip feature to prevent
moisture from crossing the cavity and a vertical slot in the upstand to allow adjustment when fixing.
The performance of frame cramps is determined by the position of the fixing. At the lowest point of
the slot the frame cramp will have a safe working load of approximately 1.0kN. As the fixing position
alters, the capacity of the tie will reduce. ACS recommends using oversize washers with the fixing
when installing cramps with a vertical slot.
n 3300 – Safe Ended Frame Cramp
The ACS 3300 range frame cramps are designed for use in either conventional or thin bed joints and
are available in a variety of lengths to suit most applications.
These ties are supplied with a 3-holed safety end for bonding into the mortar along with a vertical slot
in the upstand to allow adjustment when fixing.
The performance of frame cramps is determined by the position of the fixing. At the lowest point
of the slot the frame cramp will have a safe working load of approximately 1.0kN. As the fixing
position alters, the capacity of the tie will reduce. ACS recommends using oversize washers
with the fixing when installing cramps with a vertical slot.
inner strength in construction
ACS Channel Ties (Masonry/Channel)
n 4000 - 25/15 Channel Tie with Drip Feature
n 4200 - Multi Channel Tie with Drip Feature
The ACS 4000 range channel ties are
designed for use with 25/15 frame fixed
channels and to suit either conventional
or thin bed joint applications.
The ACS 4200 range multi end channel ties are
designed for use with 28/28 (dovetail) or 28/15
channels and to suit either conventional or
thin bed joint applications.
Both these ties are supplied with a 3-holed safety end for bonding into the mortar along with a drip
feature, which is positioned 85mm from the safe end to prevent moisture from crossing the cavity.
Ties are available in a variety of lengths to suit most applications.
inner strength in construction
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
8
e [email protected]
w www.miersconstructionproducts.co.uk
Brickwork Products
ACS Specialist Ties (Masonry/Masonry)
n Two-Part Tie, Type 2 Heavy Duty Tie
The two-part tie is designed for use in larger cavities that range from 150mm upwards.
The tie is easier to install than a one piece product as the inner section (170mm
in length) is installed into the inner leaf and the outer section, which is
manufactured to a length to suit customer requirements and is fixed as the
outer leaf is built. The tie requires an embedment of 75mm at either
end. Insulation retaining clips can be supplied to suit this tie.
C avity Size Tie Length Ref
(mm)
(mm)
150
The two-part tie exceeds the requirements of a Type 2 tie
to BS EN 845-1 up to 250mm cavity. Thereafter, the
tie meets the requirements of a Type 3 tie to
BS EN 845-1 up to 350mm cavity.
inner strength in construction
151-175
176-200
210-225
226-250
251-275
276-300
300 325
350
375
400
425
450
TPT150
TPT175
TPT200
TPT225
TPT250
TPT275
TPT300
Vista Timber Frame Tie (Timber/Masonry)
n Timber Frame Tie
Stainless Steel masonry-timber tie for 50-100mm cavities in timber frame buildings.
Accommodates vertical movement.
Tested as type B (sound).
Tested as type 6 (strength) to BS EN 845-1.
Supplied complete with 50mm x 3.35mm
Stainless Steel Annular Ring Nails.
Size (mm)
Units Per
125 (50 cavity)
250 Box
250 Box
250 Box
150 (75 cavity)
175 (100 cavity)
ACS AZTEC Adjustable Head Restraint AHR and Soffit Restraint SR
AHR/C
AHR/S
SR
AHR/H
inner strength in construction
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
e [email protected]
w www.miersconstructionproducts.co.uk
9
ACS Head Restraints
n Sliding Anchor Systems
The ACS range of sliding anchor systems is designed for
where the inner and outer leaf of masonry need to be tied
back to the structure, whilst allowing differential movement.
They are available in a wide range of lengths and fixing styles
to suit the individual requirements of the building.
The head of the anchor fixes to the soffit or face of structure
i.e. concrete slab or steel beam. The stem head dimensions
and hole positions can also be altered to suit the customer’s
specific requirements.
This image illustrates a
B4 head restraint fixed
to the underside of a
concrete slab.
n One Way and Two Way Sliding Ties
The one way (OWT) and two way (TWT) are available in standard lengths
from 100mm for the one way tie and 200mm for the two way tie in 25mm
increments. These ties are designed to work with the ACS sliding anchor
systems and allow the ties to move up and down the stem to suit coursing.
One Way Sliding Tie
(OWT)
Two Way Sliding Tie
(TWT)
How to order
n Choose correct ACS reference
n Confirm dimensions i.e. head and leg dimensions
n Confirm method of fixing, size and position of holes
n Confirm type of tie and length required
inner strength in construction
All dimensions in mm
B1 - Soffit Fix
Bent Head
B2 - Face Fix
Offset Head
B3 - Soffit Fix
Twisted Head
B4 - Soffit Fix
Welded Head
B5 - Single
Face Fix Welded
40
40
40
160
40
115
B6 - Dual Face Fix
Welded Head
160
B7 - Extended
Face Fix
40
B8 - Centre
Soffit Fix
160
160
B8A - Centre
Soffit Fix
B9 - Twisted
Face Fix
160
60
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
10
e [email protected]
w www.miersconstructionproducts.co.uk
Brickwork Products
Wall Tie Accessories
n Insulation Retaining Clip
n Debonding Sleeve
n Neoprene Isolation Pad
The insulation retaining clip can be
used on the full range of wall ties.
The positive ‘CLICK’ action will allow
the ties to fit to the formed cavity ties
and frame cramps, and also allow the
clip to fit to the full range of wire and
strip ties as well.
Debonding sleeves are supplied
complete with viewing holes to
ensure a 10mm gap is achieved
during installation.
When fixing a stainless steel tie
to a mild steel frame, an isolation
pad should be used to separate
the dissimilar metals to prevent a
bimetallic reaction.
Sizes
Pack sizes 250 per pack
Sizes
Pack sizes 250 per pack
Sizes
50 x 20mm
500 per roll
Universal Wall Starters
Each pack contains two 1165mm
lengths. Slots at each end allow
easy connection of one length to
the next.
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
e [email protected]
w www.miersconstructionproducts.co.uk
11
Bekaert Wire Ladder (for structural applications)
Reinforcement is made from
austenitic stainless steel to
1.4301 : BS EN 10088-3.
Ladder Length 2700mm.
Conforms to BS 5628-2. 500N/mm2
minimum tensile strength.
Special designs are
available on request
for corners and
T-shapes.
Overlap ends 225 mm
Also available in Galvanised
steel, use prefix GBF.
Reference
Type
Round
Wire Diameter
(mm)
Ladder
Width
(mm)
Wall
Width
(mm)
Qty
SBF30W60
SBF30W100
SBF30W150
SBF30W175
Single Leaf
Single Leaf
Single Leaf
Single Leaf
3
3
3
3
60
100
150
175
100
140/150
190/200
215
20
20
20
20
SBF35W60
SBF35W100
SBF35W150
SBF35W175
Single Leaf
Single Leaf
Single Leaf
Single Leaf
3.5
3.5
3.5
3.5
60
100
150
175
100
140/150
190/200
215
20
20
20
20
SBF40W60
SBF40W100
SBF40W150
SBF40W175
Single Leaf
Single Leaf
Single Leaf
Single Leaf
4
4
4
4
60
100
150
175
100
140/150
190/200
215
20
20
20
20
SBF45W60
SBF45W100
SBF45W150
SBF45W175
Single Leaf
Single Leaf
Single Leaf
Single Leaf
4.5
4.5
4.5
4.5
60
100
150
175
100
140/150
190/200
215
20
20
20
20
SBF50W60
SBF50W100
SBF50W150
SBF50W175
Single Leaf
Single Leaf
Single Leaf
Single Leaf
5
5
5
5
60
100
150
175
100
140/150
190/200
215
20
20
20
20
Exmet Reinforcement (for non-structural applications)
Reference
Material
Thickness
(mm)
Coil Size
Width
(mm)
0.3
0.3
0.3
0.3
65
115
175
225
76820
76920
77020
77120
Wall
Qty
Width
(mm)
100
140
225
265
5
5
1
1
Stainless steel Exmet is manufactured from austenitic stainless steel 1.4301
to BS EN 10088-1. Coil length 20cm.
Expanded steel mesh with no joints or interweaving to fail under stress.
Overlap ends 75 mm
Also available in Galvanised steel.
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
12
e [email protected]
w www.miersconstructionproducts.co.uk
Brickwork Products
ACS Channel Systems
n
Surface fixed channels are generally used for restraint ties.
ACS can supply a wide range of channels and T head bolts to
suit almost any application within the construction industry.
They may be bolted back to masonry, concrete, steelwork
and steel studding with appropriate fixings. They are usually
installed in continuous lengths to allow the secondary fixer
continuous adjustment longitudinally when installing
masonry ties.
Channels & T head bolts may be supplied in a variety of lengths
and materials to suit your needs.
The tables below show the channel types available and
standard lengths / T head bolts to suit. For further information
please consult ACS.
n
Plain back channels may be used for supporting or restraining
masonry. These channels are mainly welded to either steel
columns or beams during fabrication and prior to treating the
steelwork to increase the life expectancy. Plain back channels
again offer continuous adjustment longitudinally and can
eliminate the need for site drilling thus reducing labour on site.
Our range consists of the following:
n Cast in channels
n Surface fixed channels
n Plain back channels
Cast in channels are spilt into two groups, self-anchoring
& welded anchor types. Self-anchoring channels are
predominantly used for restraint ties whilst channels with
welded anchors are used for heavier loadings such as fixing
masonry support. Cast in Channels offer continuous adjustment
longitudinally and can eliminate the need for site drilling thus
reducing labour on site.
n
ACS Cast in Channels should be selected to ensure that the
tensile, shear and combined load capacity are not
exceeded by the design load.
XX/XX Sizes in red are Hot Rolled Profiles
XX/XX Loads highlighted in grey
are permissible loads
Profile Cold Rolled Hot Rolled
Bolts
Tensile
Shear
Longitudinal
Section
Section
Capacity (kN) Capacity (kN) Capacity (kN)
28/15
M8-M12
3.5
4.9
3.5
4.9
1.0
38/17
M10-M16
7.0
9.8
8.0
11.2
2.0
31/21
M12
8.5
7.0
8.5
11.9
2.0
inner strength in construction
41/22
M10-M16
5.0
7.0
5.0
7.0
5.5
40/25
M10-M20
8.0
11.2
10.0
14.0
2.5
M10-M20
12.0
16.8
12.0
16.8
3.2
M10-M20
22.0
30.8
22.0
30.8
3.2
M20-M30
27.0
37.8
27.0
37.8
3.2
40/22
49/30
50/30
54/33
52/34
72/49
n Surface Fixed Channels
inner strength in construction
n Plain Back Channels
Channel
Available
Reference Materials
Standard
Lengths
Channel
Available
Reference Materials
Standard
Lengths
25/15 SF
2700
3000
3000
3000
28/15 PB
3000
3000
3000
3000
28/15 SF
35/17 SF
38/17 SF
Stainless steel
Carbon steel, HDG, Stainless steel
Stainless steel
Carbon steel, HDG & Stainless steel
38/17 PB
40/25 PB
49/30 PB
Carbon steel, HDG, Stainless steel
Carbon steel, HDG, Stainless steel
Carbon steel, HDG, Stainless steel
Carbon steel, HDG, Stainless steel
Other lengths are available on request
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
e [email protected]
w www.miersconstructionproducts.co.uk
13
ACS Masonry Support
ACS provides a wide range of masonry support systems designed
to support the external leaf of masonry for all types of structure.
The presence of a masonry support angle allows differential
movement of the structure and the external cladding via a
horizontal movement joint.
Horizontal movement joints are usually positioned at every storey
or every other storey depending on the detail. However, the
maximum allowable height of masonry to be supported is 9m
or 3 storeys in height, whichever is less (refer to BS 5628: Part
1 - 2005).
Note: buildings not exceeding 4 storeys or 12 metres in height,
which ever is less, may be uninterrupted for its full height.
Materials
ACS masonry support systems are generally manufactured from
stainless steel Grade 304 material; however, we can manufacture
systems from Grade 316 stainless steel, especially if it is to be
used in corrosive environments such as coastal areas.
Where stainless steel comes into contact with mild steel it is
important to isolate the dissimilar materials via neoprene spacers
to prevent bi-metallic corrosion. These are available from ACS.
Adjustments/tolerances
ACS masonry support systems may be adjusted in 3 directions
depending on the fixing detail to overcome site tolerances.
•Vertical adjustment
This can be accommodated via the use of ALPHA or serrated
washers over the vertical slots in the system.
•Longitudinal adjustment
This can be accommodated via horizontal slots in steelwork or
via a continuous cast in channel.
•Lateral adjustment
This can be accommodated via stainless steel shims.
The maximum allowable shim is the thickness of
the bolt or 12mm whichever is less. If shimming
exceeds this figure please liaise with ACS Technical
Department.
n ALPHA Bracket System
ALPHA bracket
and washer
Patent No. GB2412952B
Almost every support system designed and manufactured by
ACS now incorporates the new ALPHA Bracket.
The ALPHA Bracket has been developed to replace the
traditional serrated bracket and offers many advantages
including the following:
•Lock safe
Where a serrated pad and washer fails, the positive locking
ALPHA Bracket locks in on itself preventing catastrophic failure.
•Finer adjustment
The ALPHA Bracket has over 5mm more vertical adjustment
than a traditional serrated bracket system; in addition to this
the ALPHA Washer allows 4mm fixing increments.
•Economic
Because much greater loads can be achieved, in most cases
fewer brackets need to be used. On a typical system we
estimate this could save over 10%.
The ALPHA Bracket has
been independently
tested at Sheffield
University and has
been proven to perform
on average over 20%
better in shear than
the traditional serrated
bracket system.
inner strength in construction
How to order
The following guide allows designers to specify masonry support systems for most situations. However, ACS offers full design service
which includes sketch proposals & technical advice for all standard & non-standard conditions.
Type of system
Orientation
Cavity
Load
T1 = Bracket/Angle
I = Inverted angle
Fixing cavity (mm) kN/m
T2 = Angle
L = Standard
T3 = Individual
U = Inverted system
R = Radiussed
Structure
S = Steel
C = Concrete
TC = Top Cleat
CH = Channel
CET = Edgetrim
Bolt type
EA = Expansion Anchor
RA = Resin Anchor
TB = T Head Bolt
BB = Blind Bolt
SS = Set Screw
Example: TL/L/100/6.0/C/RA
This would indicate a Type 1 bracket angle system to suit a 100mm cavity & 6.0kN/m loading bolted back to concrete with resin anchors.
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
14
e [email protected]
w www.miersconstructionproducts.co.uk
Brickwork Products
ACS L Type Windposts
L Type windposts are a cost effective structural system designed to suit each and every
individual project. The posts are built into the internal skin of blockwork and bolted to the
structure via suitable fixings. The use of WPT1 clip on ties to the external leaf & WPT2 clip
in ties to the inner leaf transfer the loadings applied to the cladding back to the structure.
The following tables illustrate the typical sizes available, however almost any size can be
designed / manufactured.
WPT1 tie
WPT2 tie
a
inner strength in construction
t
b
Note: for windposts positioned at movement
joint positions plastic sleeves will be
provided. Please specify this when ordering.
n L TYPE Windposts
Windposts are designed as simply supported beams. Maximum deflection is height/360 and maximum stress is 185/mm2.
Section
a x b x t
125 x 70 x 4
140 x 70 x 4 130 x 70 x 6 155 x 70 x 4 170 x 70 x 4 150 x 70 x 6 160 x 70 x 6 185 x 70 x 4 150 x 80 x 8 185 x 70 x 5 160 x 80 x 8 200 x 70 x 5 lxx
cm4
Zxx
cm3
2.5m
3.0m
3.5m
4.0m
4.5m
5.0m
5.5m
Maximum unfactored load for height of windpost (UDL) kN
128.30
174.46 208.88 229.71 294.81 308.40 367.54 370.46 421.50 458.69 502.82 566.57 15.40
19.01 24.44 22.96 27.24 31.95 36.03 31.85 43.00 39.58 48.54 45.72 8.8
11.9 14.3 15.7 16.7 16.7 16.7 16.7 16.7 16.7 16.7 16.7 6.1
8.3 9.9 10.9 14.0 14.6 17.4 16.6 20.0 20.0 20.0 20.0 4.5
6.1 7.3 8.0 10.3 10.7 12.8 12.9 14.7 16.0 17.5 19.7 3.4
4.7 5.6 6.1 7.9 8.2 9.8 9.9 11.2 12.2 13.4 15.1 2.7
3.7 4.4 4.8 6.2 6.5 7.7 7.8 8.9 9.7 10.6 11.9 2.2
3.0
3.6 3.9 5.0 5.3 6.3 6.3 7.2 7.8 8.6 9.7 1.8
2.5
3.0 3.2 4.2 4.4 5.2 5.2 6.0 6.5 7.1 8.0 6.0m
1.5
2.1
2.5
2.7
3.5
3.7
4.4
4.4
5.0
5.4
6.0
6.7
n L TYPE Parapet posts
Parapet and spandrel posts are designed as fixed base cantilevers. Maximum deflection is height/180 and maximum stress is 185/mm2.
Section
a x b x t
125 x 70 x 4
140 x 70 x 4 130 x 70 x 6 155 x 70 x 4 170 x 70 x 4 150 x 70 x 6 160 x 70 x 6 185 x 70 x 4 150 x 80 x 8 185 x 70 x 5 160 x 80 x 8 200 x 70 x 5 lxx
cm4
Zxx
cm3
0.8m
1.0m
1.2m
1.4m
1.6m
1.8m
Maximum unfactored load for height of parapet post (UDL) kN
128.30
174.46 208.88 229.71 294.81 308.40 367.54 370.46 421.50 458.69 502.82 566.57 15.40
19.01 24.44 22.96 27.24 31.95 36.03 31.85 43.00 39.58 48.54 45.72 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 6.0 6.7 6.7 6.7 6.7
6.7 6.7 6.7 6.7 6.7 6.7 6.7 5.0 6.2 8.0 7.5 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 4.3 5.3 6.8 6.4 7.6 8.9 9.3 9.3 9.3 9.3 9.3 9.3 3.8 4.6 6.0 5.6 6.6 7.8 8.8 7.8 10.5 10.7 10.7 10.7
3.3 4.1 5.3 5.0 6.0 7.0 7.8 6.9 9.3 8.6 10.5 9.9 2.0m
2.9
3.7
4.6
4.5
5.3
6.2
7.0
6.2
8.4
7.7
9.5
8.9
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
e [email protected]
w www.miersconstructionproducts.co.uk
15
ACS C Type Windposts
C Type windposts are designed within the cavity and eliminate the need for cutting blockwork.
The posts are bolted to the structure with suitable fixings. The use of WPT1 clip on ties to both
the external & internal leaf transfer the loadings applied to the cladding back to the structure.
The following tables illustrate the typical sizes available, however almost any size can be
designed / manufactured.
WPT1 tie
b
t
inner strength in construction
a
n C TYPE Windposts
Windposts are designed as simply supported beams. Maximum deflection is height/360 and maximum stress is 185/mm2.
Section
a x b x t
55 x 60 x 4 55 x 60 x 5 65 x 60 x 4 65 x 60 x 5 75 x 60 x 4 75 x 60 x 5 85 x 60 x 4 85 x 60 x 5 95 x 60 x 5 105 x 60 x 5 115 x 60 x 5 115 x 60 x 6 115 x 65 x 8 lxx
cm4
Zxx
cm3
2.5m
3.0m
3.5m
4.0m
4.5m
5.0m
5.5m
Maximum unfactored load for height of windpost (UDL) kN
34.74 41.42 50.89 61.06 70.58 85.07 94.01 113.70 147.21 185.85 229.86 268.71 362.92 12.63 15.06 15.66 18.79 18.82 22.68 22.12 26.75 30.99 35.40 39.98 46.73 63.12 2.4 2.8 3.5 4.2 4.8 5.8 6.4 7.8 10.1 12.7 15.7 16.7 16.7 1.7 2.0 2.4 2.9 3.3 4.0 4.5 5.4 7.0 8.8 10.9 12.7 17.2 1.2 1.4 1.8 2.1 2.5 3.0 3.3 4.0 5.1 6.5 8.0 9.4 12.6 0.9 1.1
1.4 1.6 1.9 2.3 2.5 3.0 3.9 5.0 6.1 7.2 9.7 —
—
1.1
1.3 1.5 1.8 2.0 2.4 3.1 3.9 4.8 5.7 7.7 —
—
—
1.0
1.2 1.5 1.6 1.9 2.5 3.2 3.9 4.6 6.2 —
—
—
—
1.0
1.2 1.3 1.6 2.1 2.6 3.2 3.8 5.1 6.0m
—
—
—
—
—
1.0
1.1
1.4
1.7
2.2
2.7
3.2
4.3
n C TYPE Parapet posts
Parapet and spandrel posts are designed as fixed base cantilevers. Maximum deflection is height/180 and maximum stress is 185/mm2.
Section
a x b x t
55 x 60 x 4 55 x 60 x 5 65 x 60 x 4 65 x 60 x 5 75 x 60 x 4 75 x 60 x 5 85 x 60 x 4 85 x 60 x 5 95 x 60 x 5 105 x 60 x 5 115 x 60 x 5 115 x 60 x 6 115 x 65 x 8 lxx
cm4
Zxx
cm3
0.8m
34.74 41.42 50.89 61.06 70.58 85.07 94.01 113.70 147.21 185.85 229.86 268.71 362.92 12.63
15.06
15.66
18.79
18.82
22.68
22.12
26.75
30.99
35.40
39.98
46.73
63.12
4.8
5.3
5.3
5.3
5.3
5.3
5.3
5.3
5.3
5.3
5.3
5.3
5.3
1.0m
1.2m
1.4m
1.6m
1.8m
Maximum unfactored load for height of parapet post (UDL) kN
3.1 3.7 4.5 5.4 6.3 6.7
6.7
6.7
6.7
6.7
6.7
6.7
6.7
2.1 2.6 3.1 3.8 4.4 5.3 5.8 7.0
8.0 8.0 8.0 8.0 8.0 1.6 1.9 2.3 2.8 3.2 3.9 4.3 5.2 6.7 8.4 9.3 9.3 9.3 1.2
1.4
1.8
2.1
2.5
3.0
3.3
4.0
5.1
6.5
8.0
9.3
10.7 1.0
1.1
1.4
1.7
1.9
2.3
2.6
3.1
4.0
5.1
6.3
7.4
10.0
2.0m
0.8
0.9
1.1
1.4
1.6
1.9
2.1
2.5
3.3
4.1
5.1
6.0
8.1
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
16
e [email protected]
w www.miersconstructionproducts.co.uk
Brickwork Products
Hessian Rolls (Frost Protection)
Temporary Protective Sheeting
Hessian Rolls for frost
protection and curing of
brickwork & concrete.
Roll Size (m)
50 x 1.37
Miers Miothene Strip/Roll
Standard density polyethylene
joint filler
complete with
perforated tear off strip
Size (m)
4 x 25
Corrugated Protection Board
Code
We can supply
virtually any
combination of
width, thickness
& perforation.
Depth
(mm)
Width
(mm)
150/10/10
175/10/10
200/10/10
100
150
175
200
10
10
10
10
100
150
175
200
12
12
12
12
100/10/10
100/12/12
150/12/12
175/12/12
200/12/12
Also available as fire
retardant.
Size
2m x 1m x 2mm
Bond It Line Marker Paint
Colours
Red x 750ml
Yellow x 750ml
Blue x 750ml
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
e [email protected]
w www.miersconstructionproducts.co.uk
17
Fischer BN Bolts
Fischer Hammer Fix
Sizes
6 x 40mm
Sizes
6 x 55mm
8 x 75mm
10 x 75mm
12 x 115mm
12 x 140mm
SDS Drill Bits
6 x 60mm
6 x 80mm
8 x 60mm
8 x 80mm
8 x 120mm
TEK Screws
Sizes
6 x 100mm
6 x 160mm
8 x 160mm
10 x 160mm
10 x 260mm
12 x 210mm
14 x 210mm
Sizes
5.5 x 38mm
5.5 x 80mm
5.5 x 105mm
Bond It Fireshield
Gauge Tape
Intumescent Sealant.
Full range of sealants available.
Available in White but can
be overpainted.
Sizes
310ml cartridge
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
18
e [email protected]
w www.miersconstructionproducts.co.uk
Reinforcement Accessories
Including Concrete Frame Contractors Products
19
Geoplast Formwork
Geotub
Circular formers
The simple formwork solution
Advantages
n Lightweight units
that are fast and
simple to install.
Handles lock the
units into position
with a 90° turn
Geotub Panel
Square/rectangular
formers
n Economical and
cost effective.
Many repeat uses
with very little
maintenance
Geopanel Star
Adjustable square/
rectangular formwork
n Easy to clean. Just
rinse with water
n Easy to store.
Can be completely
dismantled.
Does not need to
be stored in a dry
environment
Geopanel
Universal formwork
panels
n Robust units
are resistant to
damage
n No release
agents needed.
Concrete will not stick to the plastic surface
n Outer side of panels are ribbed to allow easy
plumbing and anchoring of props
n Environmentally friendly. Many repeat uses and
made from recycled materials
n Geopanel Star is adjustable and hence reduces the
amount of sizes required
n Reduces pressure on crane time as
formwork panels can be fixed and
struck by hand
Lightweight units
Easy to clean
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
20
e [email protected]
w www.miersconstructionproducts.co.uk
Concrete Frame Contractors Products
Shearstrip
Prefabricated shear reinforcement
system for concrete slabs
Shearstrip is used for the transmission of high shear forces in flat
floor applications with reduced requirements for formwork and
reinforcement and for optimum use of space. They consist
of double-headed anchors connected by a strip and are used
within a slab to provide additional reinforcement around columns.
Advantages
n Increased load carrying capacity
n Quick and simple installation
n Installation possible from the top and bottom
n Simplified formwork design
n Can be used for flat ceilings from a thickness of 180mm
n Lower construction height of the ceiling due to higher loadcarrying capacity than conventional reinforcement technology
n No thickening of reinforcement around column heads
n Can be used for all support positions and support forms
Manufacture
Shearstrip is manufactured from 500C Grade
Rebar Double Headed Studs, conforming to
the strength and dimensional requirements
incorporated within BS 8110 and BS EN
1992-1-1 (EC2).
Installation
Shearstrip rails are placed around the
column in a calculated arrangement to
meet the designed specification.
The number, height and depth of the rails
are determined by a calculation made using
the criteria of the particular job. The carrier
rails ensure correct positioning of the studs.
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
e [email protected]
w www.miersconstructionproducts.co.uk
21
Conti Strip
Pull out reinforcement
A simple and cost effective method of providing
reinforcement connection across concrete joints.
The system comprises pre-bent reinforcing bars
within a steel casing. The unit is cast into the first
pour and when the contractor is ready remove the
lid and bend out the starter bars.
Advantages
n Simplifies formwork design and accelerates
pour schedules
n No need to damage formwork by drilling
or cutting
n Starter bars are housed within their case
until ready for use, leaving a safer working
environment on site
Hook Bar
n Easy to use
n Forms a rebate in the joint,
giving better shear connection
H
L
Stock sizes
U Bar
H
W
L
Type
Case
Width
Hook Bar
CS85T12150
85
CS85T12200
85
CS11T16150
110
CS11T16200
110
U Bars
CS140T12150 140
CS140T12200 140
CS160T12150 160
CS160T12200 160
CS190T12150 190
CS190T12200 190
CS190T16150 190
CS190T16200 190
CS240T12150 240
CS240T12200 240
CS240T16150 240
CS240T16200 240
Stirrup
Width
“W”
-
-
-
-
“W”
120
120
140
140
160
160
160
160
220
220
220
220
Stirrup
Height
Bar Size
Centres Lap Length
“H”“L”
170
T12
150
480
170
T12
200
480
170
T16
150
640
170
T16
200
640
“H”“L”
170
T12
150
480
170
T12
200
480
170
T12
150
480
170
T12
200
480
170
T12
150
480
170
T12
200
480
170
T16
150
640
170
T16
200
640
170
T12
150
480
170
T12
200
480
170
T16
150
640
170
T16
200
640
All dimensions in millimetres
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
22
e [email protected]
w www.miersconstructionproducts.co.uk
Concrete Frame Contractors Products
fischer
Firestop cast-in concrete device
A complete firestop system to protect pipe or cable
installations through concrete floors.
Advantages
n Fast & Easy to install – only 4 nails/screws to fix
n The most economical way to seal pipes through floors 40% saving over traditional methods
n Eliminates timber formwork and the need to work at
heights to fit collars wraps
n No additional mastic, making good or backfilling required
n Sealed unit prevents water ingress
n Allows for connection of services within the unit
n Smoke tight
n Tested with various uPVC and HDPE pipes achieving
a fire resistance of up to 4 hours in accordance with
BS476.20:1987 & BS476.22:1987
n Extension sleeves and caps available for thicker slabs
n High visibility colour and reduction in trip hazard
1
2
3
4
5
1. Place the cast-in device on the formwork
2. Secure into position with nails though the notches
provided, don’t skew the nails
3. Pour concrete
4. Strip away formwork and knock out the cap from
the top collar
5. Insert the pipe section through the collar
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
e [email protected]
w www.miersconstructionproducts.co.uk
23
Channel Systems
Solutions to fix components
to concrete structures
When looking for a method
to fix components to concrete
structures, ACS Cast-in
channels provide a simple
and effective solution.
Our extensive range of
products are specially
designed to allow fixing to
slender or highly reinforced
concrete and consist of both
cold rolled channels suitable
for static loads and hot rolled
channels for dynamic loads.
21/19 Apex channel
31/21 Axis curve channel
Brick tie channel
51
19
2.5
14.5 28
Designed and manufactured to BS EN
100088, BS EN ISO 3506 and ETAG 001
Brickwork support channel
Technical details available on request.
All other types and sizes of channels
are available.
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
24
e [email protected]
w www.miersconstructionproducts.co.uk
Reinforcement Accessories
Tying Wire
Stainless Steel Tying Wire
Supplied as:
Supplied as:
Soft black annealed wire 17g
18 gauge
Tying Wire Dispensers
Supplied as:
Plastic or aluminium
Plastic A Clips
Cover (mm)
15
20
25
30
35
40
50
Pack Size (No.)
1000
500
500
500
250
250
125
Plastic Pile Cage Spacers
Cover
(mm)
45
50
75
75
Bar Size
(mm)
8-12
8-12
8-12
16-20
Bag Qty
(No.)
250
250
100
100
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
e [email protected]
w www.miersconstructionproducts.co.uk
25
Single Cover Concrete Spacers
Cover (mm)
20
25
30
35
40
50
60
75
Double Cover Concrete Spacers
Pack Size (No.)
1000
500
250
250
250
200
100
100
Cover (mm)
25/30
30/40
40/50
60/75
Pack Size (No.)
500
250
200
50
Concrete Square Bar
Triple Cover Concrete Spacer
Cover (mm)
20/25/30
35/40/50
Pack Size (No.)
500
200
Cover
(mm)
20
25
30
35
40
45
50
55
60
75
100
Concrete Mesh Blocks
Cover (mm)
40/50
Length
(mm)
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
Pallet Qty
(No.)
1200
900
500
400
300
300
250
150
150
100
70
Pack Size (No.)
100
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
26
e [email protected]
w www.miersconstructionproducts.co.uk
Reinforcement Accessories
Safety Strip - Standard
Safety Strip - Heavy Duty
Complete with metal strip
Sizes:
Sizes:
Supplied in 1m lengths
Supplied in 1.15m lengths
Rebar Protection Caps
Bar Size (mm) Pack Size (No.)
6-16
250
16-32
250
40-50
100
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
e [email protected]
w www.miersconstructionproducts.co.uk
27
Continuous
Plastic Chair
Dualfix
Zig Zag Spacer
Supplied in
2m lengths.
Cover
Cover
(mm)
15
20
25
30
35
40
50
60
70
Pack Size
(m)
100
100
100
100
60
60
60
40
40
Pallet Qty
(m)
6400
4800
4200
3600
2400
2160
1440
960
960
Can be seperated by hand to
form 2 x 1 metre lenghths
Cover
(mm)
15
20
25
30
35
40
50
60
Pack Size
(m)
100
100
100
100
50
50
50
40
Pallet Qty
(m)
6400
4800
4200
3600
2400
2160
1440
960
(mm)
15
20
25
30
35
40
45
50
55
60
65
Pack Size (No.)
250
250
200
100
Pallet Qty
(m)
5000
5000
5000
5000
3200
3200
3200
3840
3280
3280
3280
Plastic Wheel Spacers
Plastic Mesh Spacers
Cover (mm)
25/30
40/50
65/75
90/100
Pack Size
(m)
100
100
100
100
80
80
80
80
82
82
82
Cover
(mm)
15
20
25
25
30
30
35
35
40
40
50
50
60
75
To Suit Bar
(mm)
4-12
8-12
8-12
12-20
8-12
12-20
8-12
10-20
8-12
12-20
8-12
12-20
12-20
12-20
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
28
e [email protected]
w www.miersconstructionproducts.co.uk
Reinforcement Accessories
Plastic Shims
Thickness
(mm)
2
3
5
7
9
10
15
20
25
30
Size
(mm)
70x70
70x70
70x70
70x70
70x70
70x70
70x70
70x70
70x70
70x70
Plastic Shims
Plain Squares
Horseshoe
Pack Size
(No.)
250
250
125
125
125
250
200
150
100
100
Thickness
(mm)
2
3
5
7
9
10
15
20
25
30
Size
(mm)
70x70
70x70
70x70
70x70
70x70
70x70
70x70
70x70
70x70
70x70
Void Formers
Pack Size
(No.)
250
250
125
125
125
250
200
150
100
100
Chamfer Edge Profile Chamfer Edge Profile
Plain
Lipped
Dimensions
(mm)
20 x 10
20 x 20
25 x 12
25 x 25
Chamfer Edge Profile
Radius
Height (mm)
21
Height (mm)
11
15
20
25
30
Pack Size (m)
100
100
100
50
50
Height (mm)
7
11
15
20
25
30
Length
(m)
3
3
3
3
Pack Size (m)
100
Pack Size (m)
100
100
100
50
50
50
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
e [email protected]
w www.miersconstructionproducts.co.uk
29
Continuous Wirechairs
Height
(mm)
50
60
75
105
120
135
150
165
180
200
220
250
280
300
Length
(m)
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
Circular Wirechairs
Pack Size
(m)
50
50
50
50
50
50
50
50
50
50
40
40
40
40
Height
(mm)
50
60
75
90
105
120
135
150
Length
(m)
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
Pack Size
(No.)
20
20
20
20
20
20
20
20
Snake Spacers
Height
(mm)
50
60
70
80
90
100
110
120
130
140
150
160
180
200
220
240
260
280
300
320
340
360
380
400
Pallet Size Pack Size
(m)
(No.)
3200
25
2400
25
2400
25
2000
25
2000
25
2000
25
1600
25
1600
25
1600
25
1200
25
1200
25
1200
25
1200
25
800
25
800
25
800
25
600
25
600
25
600
25
400
25
400
25
400
25
400
25
400
25
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
30
e [email protected]
w www.miersconstructionproducts.co.uk
Formwork Products
Including Geoplast Formwork
31
Geoplast Formwork
The simple formwork solution
Advantages
n Lightweight units that are fast and simple to install.
Handles lock the units into position with a 90° turn
n Economical and cost effective. Many repeat uses with very
little maintenance
n Easy to clean. Just rinse with water
n Easy to store. Can be completely dismantled.
Does not need to be stored in a dry environment
n Robust units are resistant to damage
n No release agents needed. Concrete will not stick
to the plastic surface
Lightweight units
Handles lock the units into
position with a 90° turn
n Outer side of panels are ribbed
to allow easy plumbing and
anchoring of props
n Environmentally friendly.
Many repeat uses and made
from recycled materials
n Geopanel Star is adjustable
and hence reduces the amount
of sizes required
n Reduces pressure on crane
time as formwork panels can
be fixed and struck by hand
Easy to clean
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
32
e [email protected]
w www.miersconstructionproducts.co.uk
Geoplast Formwork
Geotub
Circular formers
Diameter
(mm)
250
300
350
400
450
500
600
700
800
900
1000
Length
(mm)
Maximum Pour Height
(m)
600
600
600
600
600
600
600
600
600
600
600
6
6
4.8
4.8
4.8
4.8
3.0
3.0
3.0
3.0
3.0
Full brochure and installation guides available
Geotub Panel
Square/rectangular formers
(10mm built in chamfer)
Width
(mm)
200
230
250
300
350
400
450
500
550
600
Height
(mm)
750
750
750
750
750
750
750
750
750
750
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
e [email protected]
w www.miersconstructionproducts.co.uk
33
Geopanel Star
Adjustable square/
rectangular formwork
600mm high pieces
Range of Adjustment
Star 20 - 60
200 - 600
300 - 600
400 - 600
500 - 600
600 - 600
Star 25-65
Star 70-100
250 - 650
350 - 650
450 - 650
550 - 650
650 - 650
700 - 1000
800 - 1000
900 - 1000
1000 - 1000
-
Geopanel
Universal formwork
panels
REUSABLE
Main Panel 120
Inner Corner Element
300 x 100 x H 600mm
Main Panel 1200 x H 600mm
Outer Corner Element
330 x H 600mm
Geopanel Other Sizes
Panel Number
Out.
Cor.
Inn.
Cor.
20
25
30
35
40
Width
(mm)
Height
(mm)
200
250
300
350
400
600
600
600
600
600
Handle
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
34
e [email protected]
w www.miersconstructionproducts.co.uk
Formwork Products
Formwork Magnets
Wedge Anchors
Size
M16
Tierod - Bars
Round Wire Nails
Size (mm)
50
65
75
100
Pack Size (No.)
25
Pack Weight (Kg)
25
25
25
25
Tierod - Wing Nuts
Sizes: 26.5mm upwards
supplied as a load
bearing hex nut
15mm: Ultimate Strength 180kn
Available Sizes (m)
1.2
1.5
2.0
3.0
6.0
Size (mm)
15
20
26.5
32
36
40
Pack Size (No.)
100
50
Singles
Singles
Singles
Singles
Tierod - Waler Plates
20mm: Ultimate Strength 320kn
Available Sizes (m)
1.5
6.0
26.5mm: Ultimate Strength 520kn
Available Sizes (m)
6.0
32mm: Ultimate Strength 844kn
Bar
(mm)
15
20
26.5
32
40
36mm: Ultimate Strength 1070kn
40mm: Ultimate Strength 1320kn
Size
Type
(mm)
120x120x10 Pressed
120x120x20 Plain
130x130x35 Plain
160x160x40 Plain
220x220x50 Plain
Pack Size
(No.)
25
20
Singles
Singles
Singles
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
e [email protected]
w www.miersconstructionproducts.co.uk
35
Tierod - Water Barrier Nuts
Bar
Type
(mm)
15 Flanged
15 Ribbed
20 Flanged
26.5 Welded Plate
Length
(mm)
110 110
130 500 Reducers:
Per Nut
Bar Size
(mm)
1.5
20
Tierod - Weldable Anchors
Disc
(mm)
65
Size
Dims
(mm)
(mm)
15
130x50
130
120x120
Tierod - Connectors
2
2
Tierod - Plastic Sleeves
c/w centrepin stop
Bar Size (mm)
15
20
26.5
32
40
All in 2m lengths
To Suit Bar (mm)
15
20
26.5
32 Weld Seam Required
(mm)
4
Size
(INT/EXT)
(mm)
14/20
20/24
22/26
26/30
32/36
40/46
Pack
Size
(m)
100
100
100
50
30
30
Length (mm)
30x105
40x130
50x150
62x180
71x250
Tierod - Plastic Cones
Size (mm)
14
20
22
26
32
40
22/50
26/50
Pack Size (No.)
1000
500
500
250
250
125
125 – also available in spiral
125 – also available in spiral
Cone Removal Key to suit
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
36
e [email protected]
w www.miersconstructionproducts.co.uk
Formwork Products
Tierod - MKK Cones
Tierod - SKK Cones
Steel plastic climbing cones
All steel climbing cones
Size
(mm)
15
20
26.5
SWL
(kn)
100
180
260
Dims
(mm)
100 long x 60 x 40
126 long x 70 x 40
135 long x 70 x 57
Size
(mm)
15
SWL
(kn)
100
Dims
(mm)
102 long x 80 x 30
Tierod - Angle Washers
ar Size (mm)
B
15
Dims (mm)
Pressed plate
120x120x6
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
e [email protected]
w www.miersconstructionproducts.co.uk
37
Tierod - Cast In Anchors
Tierod - Rock Anchors
Bar Size
Type
(mm)
15
Cast-in-anchor
15 Form Anchor
15 Plastic Anchor
Length
(mm)
95
130
70
Tierod - Rubber Stoppers
Size (mm)
20
22
26
32
Pack Size (No.)
500
500
250
125
Size
(mm)
15*
20
26.5
Fail Load
(kn)
90
100
50
Length
(mm)
130
125
135
Drill
Size
35-37
41-43
51-53
*Minimum Embed Depth 230mm
Tierod - Hex Nuts
Bar Size (mm)
15
20
26.5
Size (mm)
30x50
36x60
46x120
Tierod - Tapered
Plastic Stoppers
Size (mm)
14
20
22
26
32
40
Pack Size (No.)
1000
1000
1000
1000
500
250
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
38
e [email protected]
w www.miersconstructionproducts.co.uk
Formwork Products
Expanded Metal Formwork
Thickness
(mm)
0.4
0.4
Length
(mm)
2000
3000
Gaffa Tape
Width
(mm)
445
445
S upplied in widths (mm)
50
75
Formwork Foam
Formwork Tape
Self adhesive
Width
(mm)
50
75
Roll Length Box
(m)
(Qty Rolls)
33
24
33
18
Width
(mm)
12x6
24x12
Roll Length (m)
10
5
Box
(Qty)
25 rolls
12 rolls
Corrugated Formwork
A fast & simple system for constructing
concrete ground beams
Cut to size service available.
Width
(m)
Length
(m)
Thickness
(mm)
4.5
2.4
8
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
e [email protected]
w www.miersconstructionproducts.co.uk
39
BAG Column Formers
Tube I/D
(mm)
150 200 240 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 1100 1200 Tube Wall
Thickness (mm)
2.80 2.80 3.20 3.20 3.20 3.70 4.10 4.10 4.60 4.60 5.00 5.00 5.00 5.00 5.50 5.50 5.50 5.50 5.90 5.90 5.90 Concrete
Required(m3/mtr)
0.018 0.031 0.045 0.049 0.071 0.096 0.126 0.159 0.196 0.237 0.283 0.332 0.385 0.442 0.502 0.567 0.636 0.708 0.785 0.950 1.130 Weight
(kg/mtr)
1.24
1.63
1.96
2.08
2.38
3.09
3.52
4.50
5.44
5.99
6.53
7.16
7.71
8.26
8.81
9.36
9.91
10.46
11.11
12.11
13.21
BAG Square Column Formers
Tube I/D
(mm)
200 x 200 240 x 240 250 x 250 300 x 300 350 x 350 400 x 400 450 x 450 500 x 500 Tube Wall
Thickness (mm)
300 360 374 458 514 586 666 736 Concrete
Required(m3/mtr)
0.040 0.057 0.062 0.090 0.122 0.160 0.202 0.250 Weight
(kg/mtr)
3.10
3.90
4.00
5.20
6.00
7.60
8.70
9.80
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
40
e [email protected]
w www.miersconstructionproducts.co.uk
Schöck Isokorb
®
Balcony Connectors and Thermal Bridging Solutions
41
Schöck Isokorb® type K
Concrete-to-concrete
The Schöck thermal break element, the Isokorb®,
with its simple “drop-in“ installation, low thermal
conductivity and integral load bearing capacity
offers the ideal insulation solution to the problems
of structural thermal bridging. It is manufactured from
state-of-the-art materials – stainless steel and high density
microfibre reinforced concrete – which guarantee the highest
quality thermal partitioning of balconies and floor slabs.
Schöck Isokorb® thermal breaks dramatically reduce thermal outflow
which not only saves energy costs but also means higher surface
temperatures inside, eliminating the risk of extra condensation,
damage and mould growth.
Setting a new benchmark
Using the latest generation of micro stainless steel
fibre reinforced concrete pressure-bearing blocks, the
Schöck Isokorb® range sets a new benchmark in thermal
break technology. The Schöck Isokorb® type K with
HTE-pressure-bearing module provides the best thermal
performance achievable with thermal breaks today.
The new core material of the HTE-Module improves
its performance dramatically, reducing thermal
conductivity by 50%. This, combined with the change
of polystyrene to Neopor®, has the effect of improving
the overall performance of the Isokorb® by 20%, e.g. a
typical λeq of an Isokorb K20 is 0,087 (W/m · K)
Other advantages in the
construction process are:
n The units are light and easily
handled by one man
n Drop-in fast installation –
averaging less than five minutes
per unit
n The product has a uniquely low
thermal conductivity
n The first and therefore unique
thermal break element with
BBA certification, No. 05/4277
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
42
e [email protected]
w www.miersconstructionproducts.co.uk
Balcony Connectors and Thermal Bridging Solutions
Construction details Schöck Isokorb® type K
Construction materials Schöck Isokorb® type K
For particularly
demanding
concreteto-concrete
specifications the
BBA approved Schöck Isokorb® KXT
is available. With 120 mm insulation
it is the company’s most efficient
thermal break ever, offering 30%
more thermal performance and 50%
greater impact sound insulation
compared with the standard type K.
Contact us for further information.
On-site concrete Minimum density class
C25/30 (at component junctions)
Pressure bearing pad PE-HD synthetic cloaking
Reinforcement steel BSt 500S
Steel construction S235 JRG1
Stainless steel Construction material no. 1.4571 hardening level S460
Reinforcement ribs
BSt 500 NR, material no. 1.4362
or 1.4571
Fire protection plates Lightweight building boards,
materials class A1, cement-bound
fire safety boards, mineral wool:
ρ ≥ 150 kg/m3
Melting point T ≥ 1000°C with
integrated fire protection strips
Insulation Material Neopor®1), polystyrene hard foam
with graphite (l = 0.031 W/(m · k)
registered brand name of BASF
1)
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
e [email protected]
w www.miersconstructionproducts.co.uk
43
Schöck Isokorb® type KS
Concrete-to-steel & steel-to-steel
The Schöck Isokorb® type KS enables a thermally insulated, loadbearing
connection to be made between reinforced concrete and steel
construction components. Fine tuning and adjustment to
optimize fitting tolerance is possible.
Construction details Schöck Isokorb® type KS
Construction materials Schöck Isokorb® type KS
Reinforcing steel B 500 B acc. to BS 4449, and BSt 500 NR
Pressure bearing S 355 JO
Nonrusting steel Material no.: 1.4401, 1.4404 and 1. 4571
Pressure plate Grade A4-70 to BS EN
Spacer shims
ISO 3506
Threaded fasteners
Insulation material Neopor®, polystyrene hard foam with graphite (l = 0.031 W/(m · k)
On-site:
n Cuts down on operation time
n Ensures corrosion protection with
its stainless steel finish
n Different types ensure the
transmission of shear, bending
moment and tension, as well as
compression
n BBA certification No. 05/4277
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
44
e [email protected]
w www.miersconstructionproducts.co.uk
Balcony Connectors and Thermal Bridging Solutions
Schöck Isokorb® type KST
Concrete-to-steel & steel-to-steel
Free cantilever or canopies, balconies or walkways, the Schöck
Isokorb® type KST offers complete freedom of design when
it comes to steel construction. The unit is able to withstand
extremely demanding loads and is effective against bending
moment and shear force. Its stainless steel components mean
that the unit is completely protected from corrosion.
Construction details Schöck Isokorb® type KST
Construction materials Schöck Isokorb® type KST
CERTIFICATE 10/4801
Nonrusting steel
Material no.: 1.4401, 1.4404 and 1. 4571
Pressure plate
Grade A4-70 to BS EN
Rectangular hollow ISO 3506
section
Threaded fasteners
Insulation material
Neopor®, polystyrene hard foam with graphite (l = 0.031 W/(m · k))
On-site:
n It is easy to fit with regular end
plate connections
n All available steel profiles can be
bolted on
n Specific load situations controlled by
modular use of components
n Designed to suit loading conditions in
residential and commercial buildings
n BBA certification No. 10/4801
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
e [email protected]
w www.miersconstructionproducts.co.uk
45
A comprehensive range
for every application
Schöck Isokorb® type KXT
Load bearing element for cantilever balcones, with an
insulation thickness of 120 mm.
Schöck Isokorb® type K
Load bearing element for cantilever balconies. Transfers
shear force and bending moment stress. With integrated
hanging and edge reinforcement fitted as standard,
makes the (normally required) on-site adding of extra
stirrups and reinforcement redundant.
Schöck Isokorb® type KF
For cantilever hanging slabs as precast elements.
Partitioned model specially for the requirements of
prefabricating plants. The on-site hanging reinforcement is
integrated as standard.
Schöck Isokorb® type K-corner
Produced as a supplement to types K and KF, Schöck
Isokorb® type K-corner is used to form balconies with
outside corners. The on-site hanging reinforcement is
integrated as standard.
Schöck Isokorb® type K-HV, K-BH, K-WO, K-WU
For stepped cantilever balconies, i.e. where slabs and
balconies have to be set at different heights. The on-site
hanging reinforcement is integrated as standard.
Schöck Isokorb® type V
For insulation of balcony slabs with flexible joints,
podiums and column supported balconies. Ideal for shear
force transfer.
Schöck Isokorb® type Q
For shear and lateral force transfer, also where height and
stress points are critical.
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
46
e [email protected]
w www.miersconstructionproducts.co.uk
Balcony Connectors and Thermal Bridging Solutions
Schöck Isokorb® type D
For insulation of balcony slabs where they appear within
the floor slab field. Carries not only positive and negative
bending moment stress but also shear forces.
Schöck Isokorb® type O
For insulation of corbelled facing consoles.
Point installation according to design requirement spacing.
Schöck Isokorb® type F
For insulation between protruding balustrades.
Point installation according to design requirements
regarding spacing.
Schöck Isokorb® type A
For insulation between parapets and floor slabs.
Point installation according to design requirements
regarding spacing.
Schöck Isokorb® type S
For insulation at cantilever beams. Carries bending
moment and shear force stress at exact point of origin.
It is designed and manufactured according to the
spacing requirements.
Schöck Isokorb® type W
For insulation at floor/storey level wall height. Carries
bending moment and shear forces both vertically and
horizontally. It is designed and manufactured according to
the spacing requirements.
Schöck Isokorb® type KS/QS
The thermally insulating steel connection for free
cantilever and supported steel members on reinforced
concrete components.
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
e [email protected]
w www.miersconstructionproducts.co.uk
47
Comprehensive range
Schöck Isokorb® type KSH/QSH
The thermally insulating connection for free cantilever
and supported timber structures on reinforced
concrete components.
Schöck Isokorb® type KST
The thermal insulation element for where steel-to-steel
cantilever connection is planned.
Schöck Isokorb® type KST-QST
The thermal insulation element for shear forces involving
steel-to-steel construction.
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
48
e [email protected]
w www.miersconstructionproducts.co.uk
Grouts, Chemicals and Sealants
49
Non Shrink Grout
n Grouting under stanchions and
baseplates
n General void filling
n Fixing ballustrades, starter bars
and barriers
n Underpinning
Repair Mortars
n Levelling new and old concrete
surfaces, infilling surface
imperfections
n Making good concrete blow
holes, filling small holes
n Making good frost damaged and
scoured concrete surfaces
n Levelling of patched concrete
repairs
Sizes:
Pack Size 25kg
Curing Agent
n Aids the efficient curing of
concrete for use on external
slabs, walls and flooring
Sizes:
Pack size - 205 litre and 25 litre
Release Agents
n A specifically formulated system
designed to give maximum
protection to all types of
formwork and to help ensure
production of high quality
concrete
Sizes:
Pack Size 25kg
Polyester Anchor
Grout
Floor Levelling Compound
Used for levelling out uneven floors
prior to the laying of:
Sizes:
Pack size - 205 litre and 25 litre
n Carpets
n Carpet tiles
n Vinyl tiles
n Rubber tiles
n Thermoplastic tiles
n Linoleum
n Wood block flooring
Polyester Anchor Grout is a twocomponent polyester resin and
special catalysed filler that has
been developed for anchoring
and fixing. The gel-like nature of
the thixotropic grout is ideal for
anchorage of wall and soft fixings
for use on:
n Anchorage of bolts and fixings
to building and civil engineering
work
n Anchorage of rebar starter bars
n Installation of cavity wall ties in
brickwork
n Fixings to masonry structures
n Anchor dowel bars to
pavements and slabs
n Fixings to walls
and soffits
Mould Oil
n Provides a physical barrier to
assist in quick clean form release
Sizes:
Pack Size 25kg
Sizes:
Pack Size 25kg
Sizes:
Pack size - 25 litre and 210 litre
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
50
e [email protected]
w www.miersconstructionproducts.co.uk
Grouts, Chemicals and Sealants
Waterstop
Used for
n Water cut-off in tunnels, sewers
and basements
n Tanks, wells and mines
n Sealing around pipes and other
fixtures in concrete and masonry
Epoxy Mortar
Epoxy Mortar consists of epoxy
resin, hardner and selected graded
aggregates (filler) which when
mixed produce a high strength,
impermeable and chemically
resistant mortar.
Epoxy Mortar has negligible
shrinkage characteristics plus high
adhesion, making the product ideal
for all types of concrete repair
including repairs to:
Sizes:
Pack Size - 5kg
n Precast units
n Spalled and cracked concrete
structures
n Floors and other substrates
where chemical resistance and/
or impermeability to water, oil,
petrol and many chemicals is
required
n Beams
n Runway lights
n Bridge bearings
Top Face Retarder
Two-Part Polysulphide can be
supplied in pouring and gun
grades for sealing horizontal and
vertical joints where movement
is expected, or where the
performance specification is too
rigourous for more common mastics
and joint sealers. It is ideal for use
in expansion joints in reinforced
concrete structures such as bridges,
reservoirs, water treatment works,
sea walls and roads, etc. It can also
be used in floors subject to heavy
usage where a high resistance to
damage is required.
PVA
Sizes:
Pack Size - 5 litre tins
2.25 or 2.25 litres
Sizes:
Pack Size - 5 litre tins
Sizes: Supplied in premeasured two part
packs containing:
Sizes:
Gun applied grade -
SBR
Sizes:
Pack size - 25 litre and 200 litre
Polysulphide Sealant
25 litre tubs
Sizes:
Gun applied grade Pouring grade - 4.0 or 4.5 litres
Mould Face Retarder
Sizes:
Pack size - 25 litre
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
e [email protected]
w www.miersconstructionproducts.co.uk
51
Tiefill
Foambacker Rod
An easy to use filler for holes, voids, etc.
For sealing tie holes in concrete
Sizes:
8kg tubs
Expanding Foam
Width (mm)
10
12
15
20
25
30
40
50
Pack Size (m)
1280
762
472
335
182
121
128
73
Sizes:
750ml can
Silicon Sealant
A clear sealant for finishing or
stopping grout loss
Survey Spray Paint
Available in Red, Yellow and Blue
Sizes:
330cl cartridges
Sizes:
750ml can
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
52
e [email protected]
w www.miersconstructionproducts.co.uk
Grouts, Chemicals and Sealants
Constru Plus
Specially designed for construction
n Highly resistant – Viton seals, PE Filters, PP Nozzles,
2 hoses – one resistant to acids and the other
appropriate for solvents
n Versatile – suitable for shuttering, curing,
cleaning, waterproofing, descaling,
degreasing
n Tested with popular construction compounds
n 7 Ltr Capacity
n Costs less but lasts longer than most
metal sprayers
n Includes extras for specific applications: 0.42m
extension, fan nozzle for acids, disc nozzle for
emulsions, 0.25m flexitube and acids hose
Extendable Lance
n Enables spraying up to 6m high
n Three positions (1.2, 2.3 and 3.2m)
n Eliminates need to work at height
n Eliminates need to build platforms
n Specially designed for construction sprays
n Highly resistant – Viton seals
n Lightweight (700g) and easy to use
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
e [email protected]
w www.miersconstructionproducts.co.uk
53
Other Sprayers
Tango Sprayer
E+ Electric Sprayer
IK1.5 Sprayer
n Economical general
purpose sprayer
n Electric Sprayer
n Handy sized high
quality sprayer
n Robust design
n Full days work from
one charge
n Ergonomic and light
design
n Wide mouth for
easy filling
n Eliminates need for
pumping
n Built in pressure
control valve
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
54
e [email protected]
w www.miersconstructionproducts.co.uk
Joint Fillers
55
Miothene Strip/Roll
Standard density (30kg/m3) polyethylene joint filler complete with perforated tear off strip
We can supply virtually
any combination of width,
thickness & perforation.
Code
100/10/10
150/10/10
175/10/10
200/10/10
Depth
(mm)
100
150
175
200
Width
(mm)
10
10
10
10
Tear off
(mm)
10
10
10
10
100/12/12
150/12/12
175/12/12
200/12/12
100
150
175
200
12
12
12
12
12
12
12
12
2000
2000
2000
2000
10
10
10
10
100/15/15
150/15/15
200/15/15
100
150
200
15
15
15
15
15
15
2000
2000
2000
10
10
10
100/20/20
150/20/20
200/20/20
225/20/20
250/20/20
275/20/20
300/20/20
100
150
200
225
250
275
300
20
20
20
20
20
20
20
20
20
20
20
20
20
20
2000
2000
2000
2000
2000
2000
2000
150/25/25
175/25/25
200/25/25
225/25/25
250/25/25
275/25/25
300/25/25
150
175
200
225
250
275
300
25
25
25
25
25
25
25
25
25
25
25
25
25
25
2000
2000
2000
2000
2000
2000
2000
Length
Length
(strip) (mm) (roll) (m)
2000
10
2000
10
2000
10
2000
10
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
56
e [email protected]
w www.miersconstructionproducts.co.uk
Joint Fillers
Woodfibre
Fillerboard Sheets
Miothene Sheets
Standard density (30kg/m3) polyethylene foam expansion joint
Bitumen impregnated
woodfibre joint filler
Full Sheet
(mm)
(mm)
10
2000x1200
12
2000x1200
15
2000x1200
20
2000x1200
25
2000x1200
30
2000x1200
50
2000x1200
Half Sheet
(mm)
(mm)
10
2000x800
12
2000x800
15
2000x800
20
2000x800
25
2000x800
50
2000x800
Thickness
Miothene 70
High density (70kg/m3) polyethylene foam joint filler
(mm)
12
20
25
Sheet Size
(mm)
2400x1200
2400x1200
2400x1200
Woodfibre
Fillerboard Strip
Bitumen impregnated
woodfibre joint filler
All combinations of strip sizes
are available.
Thickness
(mm)
10
15
20
25
30
Length
(mm)
2000
2000
2000
2000
2000
Breadth
(mm)
800
800
800
800
800
Thickness
(mm)
100x12
150x12
200x12
150x20
200x20
Sheet Size
(mm)
2400 lengths
2400 lengths
2400 lengths
2400 lengths
2400 lengths
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
e [email protected]
w www.miersconstructionproducts.co.uk
57
Corkfill
Cork Expansion Joint Filler Bitumen bonded cork
expansion joint filler
Highly resilient
and will recover
95% of it’s original
thickness
All combinations
available in strip.
Thickness
(mm)
10
13
19
25
Length
(mm)
2130
2130
2130
2130
Width
(mm)
914
914
914
914
Sheet Size varies –
please ask for details.
Thickness
(mm)
5
10
15
20
Neoprene
Iso Foam
Sponge and rubber grades
available. Because of
it’s excellent recovery
it is frequently used on
bridge structures and also
structures that undergo
rapid temperature variations
To enable
breaking of
the pile head
ID
(mm)
18
22
27
35
42
OD
(mm)
27
31
36
44
51
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
58
e [email protected]
w www.miersconstructionproducts.co.uk
Ground and Slab
Including Visqueen Manufactured Products
59
Gas Membranes
Radon: The Facts
CO2 Gas
Radon, a naturally occurring, radioactive gas is
the second largest cause of lung cancer in the
UK after smoking, and is found in large areas of
the UK. Radon accumulates in buildings through
cracks in the rock or sub-soil, which is why you
need to identify if your site is in a radon risk
area and put the necessary measures in place to
protect against this.
Carbon Dioxide is a colourless gas
commonly found on landfill, coalfield
or contaminated industrial sites,
and can result in asphyxiation when
present in high levels. The Building
Regulations require that proper
precautions be taken to prevent danger
to health and safety when building on
contaminated land.
Consult www.hpa.org.uk – the Health Protection
Agency website – for affected areas.
CO2 Gas Membrane
Visqueen CO2 Gas Membrane offers
a safe solution for the protection of
buildings against Carbon Dioxide,
when installed in accordance with
BR 414 and CIRIA C665. A robust copolymer thermoplastic construction,
Visqueen CO2 Gas Membrane is yellow
for ease of identification on site and
provides ease of installation.
n Low permeability to Carbon Dioxide
n High quality robust polyethylene
membrane
Radon Membrane
E
R
n Also acts as a flexible damp proof
membrane
n
Cer
catio
n Complies with relevant BRE and CIRIA
codes of practice
L imi te
B
n BRE certified (Cert. No.083/01)
ifi
d
n Prevents ingress of Radon gas
t
Manufactured from an enhanced blend of polymer
films, Visqueen Radon Membrane is designed
to protect buildings from the ingress of Radon
gas, and also acts as a Damp Proof Membrane.
Independently certified by BRE to meet UK and Irish
Building Regulations, Visqueen Radon Membrane
follows guidance in accordance with BRE Report BR
211. The Radon Membrane System will act as an
effective passive radon membrane when installed
in accordance with our installation guidelines.
n High puncture & tear resistance
n Complies with CIRIA C665
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
60
e [email protected]
w www.miersconstructionproducts.co.uk
Visqueen Manufactured Products
Methane Gas
Commonly found on sewage treatment
localities, peat bogs, landfill and mining
sites, Methane is an odourless flammable
gas that is explosive when released into
the atmosphere and exposed to a source of
ignition - even at levels as low as 5%.
Gas Barrier
With an advanced multi-layer lamination,
Visqueen Gas Barrier offers a safe solution
for the protection of buildings and occupiers
against methane, radon and carbon dioxide
gases. The LDPE polyethylene includes an
aluminium core, providing a reinforced
protection layer whilst retaining flexibility
for easy installation.
n Low permeability to Methane, Radon and
Carbon Dioxide
n High performance multi-layer membrane
n Complies with relevant BRE and CIRIA
codes of practice
n High tear and impact resistance
GX Geomembrane
Designed for brownfield sites that require
protection from dangerous contaminants
such as hydrocarbons and methane,
Visqueen GX Geomembrane is a high
performance blend of ethylene co-polymers
providing a HDPE layer that also acts
as a damp proof membrane. With high
puncture and impact resistance, Visqueen
GX Geomembrane provides flexibility and
removes the cost requirement of protective
screed or boarding when covered with
reinforced concrete.
n Excellent bi-axial load absorption
n Independently tested for chemical
resistance - EN 14414 and EN 14415
n High stress and crack resistance on
contaminated sites
n Welding options including hot edge,
air and extrusion
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
e [email protected]
w www.miersconstructionproducts.co.uk
61
Damp Proof Courses
Gas Resistant DPC
Zedex CPT
High Performance DPC
Zedex CPT High Performance DPC is a
new generation damp proof course that
provides superior performance under
high compressive loads. Manufactured
from co-polymer thermoplastic (CPT)
it provides superior strength, adhesion
and water impermeability, enabling it to
perform effectively for the lifetime of the
building in which it is incorporated. With
BBA certification, Zedex CPT DPC includes a
range of Pre-Formed Cavity Tray Units (top
hats/cloaks) and a Jointing Tape System to
suit all applications.
n Outperforms all other DPCs
n Contains no pitch, bitumen or PVC
n Low permeability to Radon and Carbon
Dioxide gases
Visqueen Gas Resistant (GR) damp proof
course is a flexible polyethylene DPC with
an integral aluminium foil layer designed to
prevent the transmission of carbon dioxide,
radon and methane gases, as found on
some household, commercial and industrial
sites. Ideal for vertical, horizontal, stepped
and cavity tray applications, Visqueen GR
DPC provides effective protection when
installed in accordance with the relevant
building regulations and guidance.
n BBA accredited (Cert. No..94/3059)
n Effective protection against
harmful gases
n Superior cold flexibility
performance
n Independently assessed
n Can be used in conjunction with a
standard DPC
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
62
e [email protected]
w www.miersconstructionproducts.co.uk
Visqueen Manufactured Products
Tanking Systems
Waterproof Tanking
Self-Adhesive Membrane
Designed for use in both horizontal
and vertical tanking and waterproofing
applications, such as basement
waterproofing, lift pits or at high
ground levels, Visqueen Self-Adhesive
Membrane offers a two ply solution
that prevents the ingress of water
and other water-borne alkalis present
in some mortar and concrete.
BBA accredited Visqueen Self Adhesive
Membrane should be installed in
accordance with BS8102:2009, and
substrates should always be primed
with Visqueen HP Tanking Primer
to ensure optimum adhesion on
installation.
n High density self-adhesive tanking
membrane
n High puncture and tear resistance
n BBA accredited (Cert. No. 01/3820)
Waterproof and Gas
Resistant Tanking
Gas Resistant Self-Adhesive
Membrane
Commonly found on former landfill sites or affected
household, commercial and industrial land, carbon
dioxide and methane gases pose a danger to
health which must be addressed when building on
contaminated land. In addition radon gas has been
identified as existing in some 21 counties in England
by the National Radiological Protection Board.
Visqueen Gas Resistant (GR) Self-Adhesive
Membrane is built with an integral aluminium foil
layer for effective protection against the ingress of
carbon dioxide, radon and methane gases in above
and below ground applications. Substrates should
always be primed with Visqueen HP Tanking Primer
to ensure optimum adhesion on installation.
n For optimum adhesion prime with
Visqueen HP
n Effective protection for gas contaminated land
n High performance self-adhesive membrane
n Tough and tear resistant
n For optimum adhesion prime with Visqueen HP
Tanking Primer
Visqueen GR Self-Adhesive Membrane is suitable
for use with: - Visqueen Gas Resistant DPC
- Visqueen Methane Barrier
- Visqueen CO2 Gas Membrane
- Visqueen Radon Membrane
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
e [email protected]
w www.miersconstructionproducts.co.uk
63
TorchOn Tanking Membrane
TorchOn Tanking Membrane
Pre-formed Units
(Top Hats/Cloaks)
An integral part of the Zedex damp
proofing system, Visqueen pre-formed
Cavity Tray Units simplify the awkward and
time consuming process of corner detailing,
and eliminate the likelihood of water
ingress at complex junctions.
n Reduces installation times and
complexities at awkward junctions
n Built-in and surface fixed design options
n Dedicated free design support service
n Damp proofing and gas proofing units
available
Ideal for heavy duty tanking applications
such as basements, lift pits, reinforced
concrete slabs and retaining walls, Visqueen
TorchOn Tanking Membrane is a robust
waterproofing membrane designed for both
horizontal and vertical applications, above
and below ground level.
Units should be sealed to a Visqueen Gas
Barrier using Visqueen Gas Barrier Jointing
Tape and Visqueen Foil Backed Girth
Jointing Tape.
n BBA Accredited (Cert No. 10/4754)
n High performance in cold weather
CERTIFICATE 10/4754
n Torch bonded laps provide a
homogenously sealed junction
n Robust waterproofing for horizontal and
vertical applications
Substrates should be primed with Visqueen
High Performance Tanking Primer prior
to application and membranes should
subsequently be protected from site traffic
and footfall with Visqueen TreadGUARD1500
heavy duty protection board.
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
64
e [email protected]
w www.miersconstructionproducts.co.uk
Visqueen Manufactured Products
Ancillaries
Visqueen High Performance
Tanking Primer
Visqueen High Performance (HP) Tanking Primer
is a black, elastomeric bituminous priming
solution designed to prepare surfaces prior to the
application of Visqueen self adhesive and torch
applied damp proofing and
tanking membranes.
n Suitable for green concrete
and damp surfaces
n Excellent performance at
low temperatures
n Quick and easy to apply
n Ensures a superior bond
Visqueen Tapes
TreadGUARD1500
Visqueen TreadGUARD1500 is a new 100%
recycled embossed board designed to protect
membranes from following trades and general
footfall on site after installation. TreadGUARD1500
provides a rot-proof anti-slip surface, and has
been independently tested against market
alternatives for puncture resistance.
n Protects membranes from damage
n Tough, durable and non-compressive
The Visqueen portfolio incorporates a
range of system tapes to ensure effective
installation.
n VisqueenPRO Single Sided Jointing
Tape: A new high performance double
strength tape for sealing DPMs and
Radon Membranes
n VisqueenPRO Double Sided DPM
Jointing Tape: A high quality tape
for effective watertight bonding of
DPMs and Radon Membranes
n GX Geomembrane Bonding Tape:
A high quality Hydrocarbon
protection tape ensuring a gas
and watertight seal
n Part of the BBA Approved System
n Complies with BS 8102:2009
n Gas Resistant Foil Sealing Tape:
A high shear strength gas foil tape
for effective sealing of laps and joints
n Zedex DPC Jointing Tape: A high
integrity double sided tape for
Zedex DPC jointing and surface fixing
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
e [email protected]
w www.miersconstructionproducts.co.uk
65
Denso Tape
Holding Down Bolts
Grade 8.8 (high tensile) or Grade 4.6 (mild steel)
Bolts come complete with 100x100x10mm
Plate Washer + Nut
Thread Size
O/A Length
(mm)
300
375
450
600
M20
M20
M20
M20
M24
M24
M24
Width (mm)
50
75
375
450
600
Length (m)
10
10
10
100
Bolt Boxes
Bolt Boxes
Bolt Boxes
Waxed cardboard
Polystyrene
Expanded metal
Parallel
Conical
Length (mm)
229
305
380
457
534
610
762
Pack Size (No.)
400
300
200
100
100
70
50
Conical
Length (mm)
225
300
375
450
525
600
762
Pack Size (No.)
100
100
100
100
100
100
77
Other sizes manufactured to order.
Length (mm)
225
300
375
450
525
600
Diameter (mm)
75
75
75
100
100
100
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
66
e [email protected]
w www.miersconstructionproducts.co.uk
Ground and Slab Products
Polythene DPM
Corrugated Formwork
A fast & simple system for constructing concrete ground beams
Gauge
1000
1200
2000
Thickness
(mu)
250
300
500
Roll Size
(m)
25x4
25x4
12.5x4
Also available:
Temporary Protective Sheeting
Gauge
Cut to size service available.
Metal Screed Chair
Steel Screed Bar
Rectangular Hollow
Section Bar.
Width
Type
1
2
3
4
50
500
Slab Depth Range (mm)
120 – 155
145 – 205
195 – 305
295 – 405
50 – 500
Pack
Size
(No.)
1
1
1
1
1
(mm)
150
Height (mm)
25
Length
(m)
7.5
Thickness
(mu)
125
Roll Size
(m)
50x4
Geotextile
Type
Woven
Non-woven
Length
(m)
100
100
Width
(m)
4.5
4.5
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
e [email protected]
w www.miersconstructionproducts.co.uk
67
Conrete Screed Rail
Metal Topped Concrete Screed Rail
Metal Screed Rail
Type S has a straight top
which can be used with a
plastic profile
Plastic Profile 2m lengths.
Height
(mm)
80
100
125
150
Length
(m)
3.9
3.9
3.9
3.9
Aluminium Tamping Beam
Height
(mm)
65
90
115
140
165
Length
(m)
3.9
3.9
3.9
3.9
3.9
Base Crack Inducer
Height
(mm)
27
55
75
100
120
145
Length
(m)
2.5
3.0
3.0
3.0
3.0
3.0
Two Part Top Crack Inducer
Other lengths available.
Type
Size Standard
(mm) Length
(m)
Plain
100
6
With Handles
50
6
Height
(mm)
40
75
Length
(m)
5
5
Depth
(mm)
50
75
Length
(m)
5
5
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
68
e [email protected]
w www.miersconstructionproducts.co.uk
Ground and Slab Products
Aluminium T Bar
The reusable Aluminium T bar
forms a slot in the wet concrete
for easy insertion of the two part
top crack inducer.
Depth
(mm)
50
Length
(m)
5
Side Slab Strip
90KG/m3 Foam Joint Inducer
Dowel Bar Cradles
Contraction Joint
Height (to underside of Dowel)
For Slab Depth
(mm)
75
95
125
(mm)
150-180
190-230
240-280
Length
(mm)
1500
1500
1500
Sleeves to suit
Length
(mm)
75
Pack Size
(No.))
100
Type Height Width Coil
(mm) (mm) Length (m)
Plain
40
5
30
Self adhesive 40
5
30
Expansion Joint
Height (to underside of Dowel)
For Slab Depth
(mm)
65
95
115
(mm)
150-180
190-230
240-280
Length
(mm)
1500
1500
1500
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
e [email protected]
w www.miersconstructionproducts.co.uk
69
Dowel Bar Sleeves
Dowel Bars
Dowel Bar Caps
Round mild steel bars
Bar Size
(mm)
12
16
16
20
25
32
Bar Diameter
Length
(mm)
450
200
450
300
300
375
Pack Size
(No.)
100
100
100
100
100
100
Compression Foam Plugs
(mm)
12
12
16
16
20
25
32
Length
(mm)
600
900
400
900
600
600
750
Dowel Bar Paint
Bar Size
12
16
20
25
32
Length
(mm)
100
100
100
100
100
Pack Size
(No.)
100
100
100
100
100
Frost Blankets
The blanket gives excellent
thermal insulation allowing
it to keep the concrete warm
in the winter and protects it
from the heat in the summer
Pack Sizes:
5 ltr Tin and 25 ltr Tub
To Suit Bar Size
(mm)
12
16
20
25
32
40
Length
(m)
100
100
100
100
100
100
Void Formers
Dimensions
(mm)
20 x 10
20 x 20
25 x 12
25 x 25
Length
(m)
3
3
3
3
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
70
e [email protected]
w www.miersconstructionproducts.co.uk
Concrete Testing
71
Cube Mould
Scoop
Slump Cone
4 - part metal
Aluminium
Szes (mm)
100 x 100
150 x 150
Tamp Rod
Base Plate
For use with slump cone
For use with slump cone
110V Curing Tank
Digital Concrete
Thermometer
12 cube capacity
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
72
e [email protected]
w www.miersconstructionproducts.co.uk
Reinforcement Connections
73
Lenton Lock Coupler
Rebar Connection System
Reinforcement Continuity System
Reinforcement continuity systems maintains continuity of reinforcement at
construction joints in concrete.
This easy to use system accelerates the construction process. It is simple to
install and offers many benefits over conventional joint construction including
simplification of formwork design and the removal of the need to drill shuttering.
The coupler is a simple solution for
joining reinforcing bars, particularly
when one bar is already fixed in
position. With the use of an impact
wrench the screws are tightened
until the heads break off, leaving a
fully compliant joint in accordance
with BS8110.
To Suit Rebar
T12
T16
T20
T25
T32
T40
T50
Type 80
Type 110
Type 140
60/72
96
120
T12
T16
T12
170
T12
170
170
30
30
30
80
110
140
Type 160
Type 190
Type 240
140
170
220
T12
T16
170
T12
T16
T12
T16
170
170
30
30
160
30
190
240
Dimensions in mm.
Note: Boxes containing 16mm bars
are nominally 40mm deep.
On 16mm diameter Type U boxes,
the stirup may be achieved using
two shape code 21 bars.
Lenton Lock Transitional Coupler
1250
mm
150mm
Centres
1250
mm
200mm
Centres
The Transition range of couplers
provides an effective solution for
joining reinforcing bars of different
diameters whilst having all the
benefits of the standard coupler.
To Suit Rebar’s
T12 – T16
T12 – T20 T16 – T20
T20 – T25 T25 – T32
T32 – T40
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
74
e [email protected]
w www.miersconstructionproducts.co.uk
Waterproofing and Gas Proofing
75
Self Adhesive
Waterproofing
Membrane
Waterproofing
membrane
consists of a self
bonding polymer
modified bitumen which is
covered on one side by a tough
multiply cross laminated polythene
film and protected on the other side
by a release sheet which is removed
prior to the bonding of the material
on to a suitably prepared substrate.
Uses:
It is intended for use as a self
bonding vertical or horizontal damp
proof membrane in tanking below
ground structures, subways and
retaining walls.
Liquid Damproof
Membrane
Liquid Membrane is
a liquid bitumen
material
containing
10% rubber
latex to give
the dried coat a
high degree of flexibility. The material
dries after application.
Benefits:
Liquid Membrane is used to protect
below ground structures against attack
by ground water chemicals, salts and
sulphates.
Protection Board
Protection
Board is a
semi rigid board
containing blended
bitumens and minerals
reinforced with cellulose
fibres, heavily compressed. Used
to provide protection for waterproof
membranes against mechanical
damage by backfilling and foot traffic.
Uses:
Bituminous Protection Board is
designed for use in both horizontal
and vertical applications to protect
Waterproof membranes against
abrasive backfill and poured concrete.
They should be butt jointed and
supported during backfilling. Mastic
or joint filler adhesive can be used
to spot bond the board to the
membrane. The joints should be
staggered and also staggered over
the membrane laps.
Bentostop
Bentonite Waterstop
Bentonite
Waterproof
Membrane
Bentonite Waterproof Membrane is a
high performance self swelling, self
healing waterproofing membrane.
The bentonite used in its
manufacture is capable of repeated
cycles of wetting and drying without
deterioration of its sealing properties
and has a life expectancy measured
in thousands of years (BBA Certified).
It has WRAS approval for use with
potable water.
Uses:
Bentonite Waterproof Membrane has
been specifically developed for use
as a high performance waterproofing
membrane to provide a totally
watertight barrier in below ground
concrete construction, including
basements, underground car parks,
plant rooms, access tunnels etc.
Walldrain
Its dimpled sheet provides
outstanding drainage and physical
protection over under-ground
foundation walls. The nonwoven
geotextile mat over the dimples
creates a continuous air gap for
reliable ventilation and drainage of
water inflow from the surrounding
soil. This composite system excels in
a wide variety of other application
sectors as well, including basements,
underground parking grages, roof
terraces, parking garage roofs, etc.,
providing users a variety of benefits.
n Permanent air gap, suspended
particles in water are filtered out
by the geotextile mat
Roll size (m)
5m Roll 25 x 20mm
n Excellent drainage performance
n Outstanding compressive strength
(400kN/m2)
Poly Bar
Self Swelling Waterstop
Roll size (m)
10m Roll 20 x 5mm
Walldrain products are resistant to a
wide range of chemicals, impervious
to root penetration, rot-proof and
unaffected by soil bacteria and fungi.
Supplied as:
25 - 200 litre containers
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
76
e [email protected]
w www.miersconstructionproducts.co.uk
Waterproofing and Gas Proofing
Cavity Drain
RIW
A profiled HDPE drainageSheet
system for
internal tanking applications, designed
to collect water entering Chemical
basements
Resistance
and channel it to a suitable
collection
point for disposal.
Low Temperature
Sheet
Double Drain
Flexiseal
RIW
An impermeable HDPE profiled sheet
incorporating a geotextile filter fabric
designed to protect the primary
waterproof membrane, prevent
water reaching the structure and
reduce hydrostatic water pressure.
Factory Controlled
Thickness
Low Temperature
Impact Resistant
Impact Resistant
Wet Substrate
Roller
Impact Resistant
Spray
Brush
Heviseal
Roller
Flexible
Brush
Flexible
Brush
Rn
UV Stable
UV Radon
Resistant
SO4 Sulphate Resistant
Roller
SO4 Sulphate Resistant
CH4
Methane Barrier
UV Stable
UV Spray
Colour Coded
CO2 CO2
Barrier
Rn
Radon
Resistant
UV Stable
Flexible
UVSupplied
as:
Plasterbond
CH4
5 and
25 Barrier
litre containers
SO4
Sulphate Resistant
Methane
Sheet
Self Healing
CO2 Colour
Coded
CO2 Barrier
Chemical
Resistance
Abrasion
Resistant
Factory Controlled
RIW
Thickness
Coil or Roll
Flexible
Plasterbond
Structureseal
Sheet
Sheet Resistant
Impact
Self Healingof high swelling
A composite
1 Class 1 Fire Rating
Sodium
Bentonite clay, encapsulated
Chemical
Low Temperature
Temperature
Low
Abrasion
Resistant
Resistance
between
two
geotextile layers.
When
Factory
Controlled
confined under the structure
the
Self Healing
Thickness
Substrate
Coil hydrates
or Roll
system
to form Wet
a dense
and
impervious
waterproof
membrane.
Impact Resistant
Rn Wet Substrate
Radon Resistant
Class 1 Fire Rating
1
Brush
Rn Radon Resistant
Roller
Plasterbond
Spray
SO4 Sulphate Resistant
Rn Radon Resistant
Supplied as:
Flexible
5, 25 and 205 litre containers
Sheet
Plasterbond
SO4 Sulphate Resistant
Chemical
Resistance
Flexible
Factory Controlled
Thickness RIW
Sheet
Sheet
Impact Resistant
Sheetseal GR
CH4 Methane
A cold applied self adhesive
sheet
Barrier
Chemicala HOPE film coated
combining
with
Low
Temperature
Resistance
CO2 CO2 Barrier an
rubber
bitumen and incorporating
Factory
Controlled
aluminium foil layer to form
a preWet Substrate
Thickness
Flexible
formed water and gas proof
membrane.
CO2 CO2 Barrier
Plasterbond
Wet Substrate
CO2 CO2
Barrier
CO2 CO2 Barrier
SO4 Sulphate
Resistant
Plasterbond
Coil or Roll
Impact Resistant
CO2 Barrier
Self Healing
Spray
Abrasion Resistant
1
A two coat cold applied bitumen
Roller
solution that dries to form a seamless
and fully bonded waterproof
Spray coating.
Low Temperature
CH4 Methane Barrier
CH4
1.1 x 5
Methane Barrier
CO
RIW
CH42 Methane Barrier
CO CO2 Barrier
Factory Controlled
CO CO2
Barrier(m)
Roll
size
Thickness
2
Brush
Low Substrate
Temperature
Wet
2
LAC
UV Stable
UV Factory
Controlled
Thickness
CH4 Methane Barrier
Self Healing
Spray
Self Healing
Chemical
Resistance
Abrasion Resistant
Plasterbond
1 Class 1 Fire Rating
SO4
Sulphate Resistant
Chemical
Resistance
Coil
or Roll
Rn Radon Resistant
Plasterbond
Class 1 Fire Rating
UV UV Stable
Impact Resistant
UV UV Stable
Flexible
Abrasion Resistant
Plasterbond
Primer:
Colour Coded
Sulphate
SO4
5 and
25 Resistant
litre containers
Impact
Resistant
Coil or Roll
Chemical
Abrasion Resistant
Resistance
1
Low
ClassTemperature
1 Fire Rating
Rn Radon Resistant
call
MiersUVon
Plasterbond
Coil or Roll
UV Stable
Low Temperature
Chemical
Resistance
Wet Substrate
Thickness
Low Temperature
e [email protected]
Flexible
Colour Coded
Rn Radon Resistant
RIW
Rn Radon Resistant
Flexible
A cold applied self adhesive sheet
CH4 Methane Barrier
Impact Resistant
Factory Controlled
combining a HOPE film coated
Thickness
with rubber bitumen to2 form a
Low Temperature
CO CO2 Barrier
preformed waterproofRnmembrane.
Radon Resistant
Wet Substrate
Sheet
Rn Radon Resistant
Flexible
Plasterbond
Self
Healing
SO4 Self
Healing
Sulphate
Resistant
CH4 Methane Barrier
Factory Controlled
Thickness
2
CO CO2 Barrier
Rn
Resistant
RollRadon
size
(m)
Abrasion
Roller Resistant
Spray
Coil or Roll
19.05
x
1.05,
20
x
0.3
and
20 x 0.15
Plasterbond
Chemical
Self Healing
Class
1 Fire Rating
Resistance
1
SO4
Primer:
Self
Healing
Sulphate
Resistant
Plasterbond
5 and 25 litre containers
1
Abrasion Resistant
Roller
Impact Resistant
Spray
Coil or Roll
Low Temperature
Class
1 Fire Rating
Resistance
Wet Substrate
Sheet
Sheetseal
9000
Chemical
RIW
A range of high quality Polymetric DPC
Plasterbond
UV UV Stable
and cavity tray systems
containing
Flexible
polyester
fibres
to
increase
tensile
CH4 Methane Barrier
Impact Resistant
Factory
Controlled
strength and elongation at
break.
Low Temperature
Sheet
Thickness
CO2 CO2 Barrier
Low Temperature
Wet Substrate
Flexible
Colour Coded
UV UV Stable
StableControlled
UV UV
Factory
Thickness
CH4 Methane Barrier
Temperature
RollLowsize
(m)
Rn Brush
Radon Resistant
SO4
CO20m
various widths
CO2xBarrier
Abrasion
Sulphate Resistant
Resistant
2
UV UV Stable
Rn Colour
Radon Coded
Resistant
Spray
Coil
or Roll
Chemical
Class
1 Fire Rating
Resistance
1
SO4 Brush
Sulphate Resistant
St Roller
Neots 01480 702222
Airdrie 01698 907 101
Class 1 Resistant
Fire Rating
Roller
1 Impact
Chemical
Coil
or Roll
Resistance
Warrington 01925 202 128 Birmingham 0121 2893
293
SO4 Sulphate Resistant
Rn Radon Resistant
Chemical
Self Healing
Resistance
Sheet
Sheet
Sheetseal
226
Factory Controlled
Colour Coded
Spray
CH4 Methane Barrier
Factory
Roll
sizeControlled
(m)
Thickness
2
CO19.05
x
1.05
CO2 Healing
Barrier
Self
Self Healing
Spray
Sheet
Thickness
Factory Controlled
CH4 Methane
ThicknessBarrier
CH4 Methane
Wet Substrate
Barrier
UV UV Stable
Primer:
UV Stable
Impact Resistant
UV5 and 20 litre containers
Low
SheetTemperature
Rn Radon
Self Healing
Resistant
Spray
Chemical
Roll size (m)
2 x 15
Impact Resistant
Sheet
SO4 Sulphate Resistant
Flexible as:
Supplied
Resistance
SO4
6 and
25kg
containers
Factory Controlled
Sulphate Resistant
Colour Coded
RIW
A two coat cold applied bitumen
solution
and minerals
SO4 Sulphate
Sprayfilled with fibres
Roller Resistant
to provide a UV resistant waterproof
Colour Coded
coating.
Spray
Stable
UV UV
Roller
Colour Coded
Brush
Thickness
Flexible
Brush
Sheet
Low Temperature
Wet Substrate
Roll
size (m)
Factory
2 x 20 Controlled
RIW
A high performance two coat,
Roller liquid
applied, seamless and fully bonded
waterproof coating basedSpray
on polyurethane resins. Applied in two colour
Colour Coded
coded coats for on-site quality
control.
Wet Substrate
Chemical
Resistance
Brush
Plasterbond
Abrasion
Spray Resistant
Impact Resistant
2
CO
CO2 Barrier
Wet Substrate
CH4 Methane Barrier
w www.miersconstructionproducts.co.uk
Plasterbond
1 Class 1 Fire Rating
Colour Coded
Impact Resistant
Self Healing
77
Tilesafe
A cold applied self adhesive
waterproof membrane comprising
of a thick rubberised bitumen layer
incorporating a woven glass fibre
mesh. Designed to prevent
water
Sheet
penetration through ceramic tiles in
wet areas.
Flexible
Sheet
Self Healing
Flexible
Factory Controlled
Thickness
Healing
RollSelfsize
(m)
10 Factory
x 1 Controlled
Thickness
Rn Radon Resistant
1
Rn Radon Resistant
Spray
SO4 Sulphate Resistant
Chemical
Resistance
CO
Spray
Plasterbond
Chemical
Resistance
Impact Resistant
Plasterbond
CO2 CO2 Barrier
Impact Resistant
CH4 Methane Barrier
CO2 Barrier
Low Temperature
Roller
Low Temperature
Wet Substrate
Roller
Colour Coded
Wet Substrate
Brush
Colour Coded
Brush
Abrasion Resistant
1
Abrasion Resistant
Roller
Chemical
Resistance
Spray
Impact Resistant
Colour Coded
Slip Resistant
Class 1 Fire Rating
UV UV Stable
SO4 Sulphate Resistant
Abrasion Resistant
Supplied
as:
5 and
20 litre containers
CO CO2 Barrier
Chemical
2
Resistance 25kg bags
Aggregates:
Impact Resistant
CH4 Methane Barrier
Low Temperature
UV UV Stable
Self Healing
SO4 Sulphate Resistant
Wet Substrate
CO2 CO2 Barrier
CH4 Methane Barrier
Rn Radon Resistant
Plasterbond
Low Temperature
Coil or Roll
Self Healing
Factory Controlled
Thickness
Wet Substrate
Rn Radon Resistant
Abrasion Resistant
Plasterbond
Coil or Roll
Coil or Roll
Class 1 Fire Rating
Factory Controlled
Thickness
Coil or Roll
RIW
Brush
Slip Resistant
CH4 Methane Barrier
1
Brush
A high performance liquidRoller
applied,
seamless, fully bonded and durable
Spray
waterproof coating based on epoxy
resins. Can be applied in Colour
two colour
Coded
coded coats for on-site quality
control.
1 Class 1 Fire Rating
UV UV Stable
SO4 Sulphate Resistant
UV UV Stable
2
Toughseal
RIW
Flexible
Sheet
RIW
A hydrophilic waterstop based
on
Coil or Roll
Sodium Bentonite material, designed
to form a permanent sealLow
toTemperature
prevent
water infiltration through insitu
Self Healing
concrete construction joints.
Coil or Roll
Flexible
Low Temperature
Wet Substrate
Self Healing
Abrasion Resistant
Chemical
Flexible as:
Supplied
Resistance
5 m coil, 6 No. Coils/Box
Wet Substrate
Impact Resistant
Abrasion Resistant
Roller
Chemical
P.V.C.
UV UV Stable
Resistance Waterstop
SO4
Resistant
Resistant
P.V.C. Impact
Waterstop
is a high Sulphate
performance,
heavy duty profile waterstop
2
CO
Roller
Barrier
specifically developed to CO2
seal
joints
in concrete structuresCH4
at the outside
Methane Barrier
UV UV Stable
surface thus protecting the reinforcing
steel
against
corrosion attack,
SO4 Sulphate
Spray
Resistant
in addition to providing a totally
2
CO CO2 Barrier
watertight
seal.
Colour Coded
Uses:
CH4
Barrier have been
Brush
P.V.C. Methane
Waterstops
independently tested to provide a
Radon Resistant
totallySpray
effective waterRnbarrier
up to
27m head in construction, expansion
Colour Coded
Plasterbond
and kicker joints in concrete
water
retaining and excluding structures.
Brush
1
Class 1 Fire Rating
RnType
Sizes Width
(mm)
Factory Controlled
Radon Resistant
Thickness
Construction Joint 200 - 250
Expansion
PlasterbondJoint
Kicker Joint
200 250 300
-
- 300
1Roll Size (m)
15mSheet
10m 10m
Class 1 Fire Rating
Factory Controlled
Thickness
Flexible
Class 1 Fire Rating
Waterstop
Sheet
Sheet
RIW
RIW Limited - Waterproofing Products
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
78
e [email protected]
w www.miersconstructionproducts.co.uk
Index by Section
79
Brickwork Products
Visqueen Zedex CPT DPC
Zedex Housing Grade DPC
Anderson Monarflex Nubit DPC
Toughsheet Polythene DPC
Insulated DPC
ARC Party Wall DPC
ARC Rockfibre Insulated DPC
ARC Cavity Stop Socks & TCBs
3
3
3
3
3
4
4
4
DPC Accessories
Fixing Strip
Fixing Pins
4
4
Jointing Tape
Thermabate Insulated Cavity Closers
Timloc Thermo-loc EPS Cavity-Closer
Timloc Everdry Cavity Trays
Rytweep Weep Vent
Rytweep Weep Vent Tube
Airflow Dual Weep Vent
Timloc Tunnel Weep Vent
Timloc Cavity Wall Weep
Vent Type 1143
Timloc Underfloor & Through
Wall Venting
4
5
5
5
6
6
6
6
6
6
Ties and Head Restraints
Vista Light Duty Housing Tie
Vista General Purpose Wall Tie
ACS 2000 - Type 1 Heavy Duty
ACS 2100 - Type 1 Heavy Duty
ACS 2200 - Type 1 Heavy Duty
ACS 2300 - Type 1 Heavy Duty
ACS 2400 - Type 1 Heavy Duty
Movement Tie
ACS 3000 - Universal Frame Cramp
ACS 3200 - Safe Ended Frame
Cramp with Drip Feature
ACS 3300 - Safe Ended Frame Cramp
ACS 4000 - 25/15 Channel Tie
with Drip Feature
ACS 4200 - Multi Channel Tie
with Drip Feature
ACS Two-Part Tie, Type 2
Heavy Duty Tie
Vista Timber Frame Tie
ACS AZTEC Adjustable Head
Restraint AHR and Soffit Restraint SR Restraint AHR
ACS Sliding Anchor Systems
ACS One Way and Two Way
Sliding Ties
Wall Tie Accessories Insulation Retaining Clip
Debonding Sleeve
Neoprene Isolation Pad
Universal Wall Starters
Bekaert Wire Ladder
(for structural applications)
Exmet Reinforcement
(for non-structural applications)
7
7
7
7
7
7
7
8
8
8
8
8
9
9
9
10
10
11
11
11
11
12
12
ACS Channel Systems
ACS Surface Fixed Channels
ACS Plain Back Channels
13
13
ACS Masonry Support
ACS ALPHA Bracket System
14
ACS L Type Windposts
ACS L TYPE Parapet posts
15
ACS C Type Windposts
ACS C Type Parapet posts
16
Hessian Rolls (Frost Protection)
Temporary Protective Sheeting
Miers Miothene Strip/Roll
Corrugated Protection Board
Bond It Line Marker Paint
Fischer BN Bolts
Fischer Hammer Fix
SDS Drill Bits
TEK Screws
Gauge Tape
Bond It Fireshield sealant
17
17
17
17
17
18
18
18
18
18
18
Reinforcement Accessories
Including Concrete Frame
Contractors Products
Geoplast Formwork
Simple formwork solution
20
Shearstrip
Prefabricated shear reinforcement
system for concrete slabs
21
Conti Strip
Pull out reinforcement
22
fischer
Firestop cast-in concrete device
23
Channel Systems
Solutions to fix components
to concrete structures
24
Tying Wire
Stainless Steel Tying Wire
Tying Wire Dispensers
Plastic A Clips
Plastic Pile Cage Spacers
Single Cover Concrete Spacers
Double Cover Concrete Spacers
Triple Cover Concrete Spacer
Concrete Mesh Blocks
Concrete Square Bar
25
25
25
25
25
26
26
26
26
26
Safety Strip
Standard
Heavy Duty
Rebar Protection Caps
Continuous Plastic Chair
Dualfix
Zig Zag Spacer
Plastic Mesh Spacers
Plastic Wheel Spacers
27
27
27
28
28
28
28
28
Plastic Shims
Plain Squares
Horseshoe
Void Formers
29
29
29
Chamfer Edge Profile
Plain
Lipped
Radius
29
29
29
Continuous Wirechairs
Circular Wirechairs
Snake Spacers
30
30
30
Formwork Products
Including Geoplast Formwork
Geoplast Formwork
The simple formwork solution
Geotub Circular formers
Geotub Panel Square/
rectangular formers
Geopanel Star Adjustable
square/rectangular formwork
Geopanel Universal
formwork panels
34
34
35
35
35
Tierod
Bars
Wing Nuts
Waler Plates
Water Barrier Nuts
Weldable Anchors
Connectors
Plastic Sleeves
Plastic Cones
MKK Cones
SKK Cones
Angle Washers
Cast In Anchors
Rock Anchors
Rubber Stoppers
Hex Nuts
Tapered Plastic Stoppers
35
35
35
36
36
36
36
36
37
37
37
38
38
38
38
38
Expanded Metal Formwork
Gaffa Tape
Formwork Tape
Formwork Foam Self adhesive
Corrugated Formwork
39
39
39
39
39
BAG Column Formers
Circular
Square
40
40
Schöck Isokorb®
Balcony Connectors and Thermal Bridging Solutions
Schöck Isokorb® type K
Concrete-to-concrete
Schöck Isokorb® type KS
Concrete-to-steel & steel-to-steel
Schöck Isokorb® type KST
Concrete-to-steel & steel-to-steel
Schöck Isokorb® Product Range
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
e [email protected]
33
Formwork Magnets
Wedge Anchors
Round Wire Nails
call Miers on
80
32
33
w www.miersconstructionproducts.co.uk
42
44
45
46
Index by Section
Grouts, Chemicals and Sealants
Non Shrink Grout
Repair Mortars
Curing Agent
Release Agents
Floor Levelling Compound
Polyester Anchor Grout
Mould Oil
Waterstop
Epoxy Mortar
Polysulphide Sealant
Top Face Retarder
Mould Face Retarder
PVA
SBR
Tiefill
Foambacker Rod
Expanding Foam
Silicon Sealant
Survey Spray Paint
50
50
50
50
50
50
50
51
51
51
51
51
51
51
52
52
52
52
52
Sprayers
Constru Plus
Tango Sprayer
E+ Electric Sprayer
IK1.5 Sprayer
53
54
54
54
Joint Fillers
Miothene Strip/Roll
(Polyethylene joint filler complete
with perforated strip)
Miothene Sheets
(Polyethylene foam expansion joint)
Miothene 70
(Polyethylene joint filler)
Woodfibre Fillerboard Sheets
(Bitumen impregnated
woodfibre joint filler)
Woodfibre Fillerboard Strip
(Bitumen impregnated
woodfibre joint filler)
Corkfill
(Bitumen bonded cork
expansion joint filler)
Cork Expansion Joint Filler
Neoprene
Iso Foam 56
57
57
57
57
58
58
58
58
Ground and Slab
Concrete Testing
Including Visqueen Manufactured Products
Cube Mould 4 - part metal
Slump Cone
Scoop Aluminium
Tamp Rod For use with slump cone
Base Plate For use with slump cone
110V Curing Tank 12 cube capacity
Digital Concrete Thermometer
Gas Membranes
Radon Membrane
CO2 Gas Membrane
Gas Barrier
GX Geomembrane
60
60
61
61
Damp Proof Courses
Gas Resistant DPC
Zedex CPT High
Performance DPC
Tanking Systems
Waterproof Tanking
Self-Adhesive Membrane
Waterproof and Gas Resistant
Tanking Gas Resistant
Self-Adhesive Membrane
62
Reinforcement Connections
62
Lenton Lock Coupler
Lenton Lock Transitional Coupler
Rebar Connection System
74
74
74
63
63
TorchOn Tanking Membrane
TorchOn Tanking Membrane
64
Pre-formed Units (Top Hats/Cloaks) 64
Ancillaries
Visqueen High Performance Tanking Primer
65
TreadGUARD1500
65
Visqueen Tapes
65
Holding Down Bolts
Denso Tape
Bolt Boxes (Waxed Cardboard)
Bolt Boxes (Polystyrene)
Bolt Boxes (Expanded Metal)
Corrugated Formwork
Polythene DPM
Metal Screed Chair
Steel Screed Bar
Geotextile
Conrete Screed Rail
Metal Topped Concrete Screed Rail
Metal Screed Rail
Aluminium Tamping Beam
Base Crack Inducer
Two Part Top Crack Inducer
Aluminium T Bar
Side Slab Strip (Foam joint inducer)
Dowel Bar Cradles
Dowel Bar Sleeves
Dowel Bars
Dowel Bar Caps
Compression Foam Plugs
Dowel Bar Paint
Void Formers
Frost Blankets
72
72
72
72
72
72
72
66
66
66
66
66
67
67
67
67
67
68
68
68
68
68
68
69
69
69
70
70
70
70
70
70
70
Waterproofing and Gas Proofing
Self Adhesive Waterproofing
Membrane
Protection Board
Liquid Damproof Membrane
Bentonite Waterproof Membrane
Bentostop Bentonite Waterstop
Poly Bar Self Swelling Waterstop
Walldrain
Cavity Drain
Double Drain
Flexiseal
Heviseal
LAC
Sheetseal 226
Structureseal
Sheetseal GR
Sheetseal 9000
Tilesafe
Toughseal
Waterstop
P.V.C. Waterstop
76
76
76
76
76
76
76
77
77
77
77
77
77
77
77
77
78
78
78
78
call Miers on
St Neots 01480 702222 Airdrie 01698 907 101
Warrington 01925 202 128 Birmingham 0121 2893 293
e [email protected]
w www.miersconstructionproducts.co.uk
Miers Branches
Throughout the UK
Nationwide
supply of building
accessories...
...we offer
n Independently run business
n Nationwide coverage
n Commitment to the highest standard of service
Airdrie
n A unique level of expertise & experience
Glasgow
Edinburgh
Manchester
Liverpool
Warrington
Birmingham
St Neots
London
Branches
St Neots Airdrie Warrington Birmingham t 01480 702222
t 01698 907 101
t 01925 202 128
t 0121 2893 293
f 01480 702223
f 01698 907 102
f 01925 202 129
f 0121 2893 294
Head Office
Hawkesden Road, St Neots, Cambs PE19 1QS
t 01480 702222
f 01480 702223
e [email protected]
www.miersconstructionproducts.co.uk