1. No category

WV-IS XL
Activated carbon pellets
Applications
Viledon® WV-IS XL pellets are premium gas-phase
extruded 4 mm carbon pellets made from wood.
The pore structure of wood derived activated carbon creates versatile pellets that can be used for
the adsorption of hydrogen sulfide, chlorine, sulfur
dioxide and other acid gases from air. It also has
the ability to remove low concentrations of odors.
This 4 mm diameter extruded pellets are used in
vapor adsorbers in industries such as pulp and
Contaminant gases
paper, refineries and grain, to protect rooms
from corrosive gases such as hydrogen sulfide
and sulfur dioxide.
Safety
Always refer to the Safety Data Sheet for detailed information on safety. For SDS information, visit us at www.freudenberg-filter.us.
Properties
ASTM hardness
Ash
94
%
18
mg /min
0.15
mg
1.1
Density (dry basis)
lb / ft3
∼ 25.3
Density (as shipped)
lb / ft3
∼ 30
Dust attrition coefficient
Initial dust
Pellet shape
cylindrical
Viledon® WV-IS XL pellets are especially recommended for all contaminant gases highlighted in blue
Choose other pellets for all contaminant gases marked
in grey
1
Hydrogen sulfide (H2S)
2
Sulfur dioxide (SO2)
3
Other oxides of sulfur
4
Nitrogen oxides (NOX)
5
Chlorine
6
Ammonia
7
Formaldehyde
8
Hydrocarbons
9
Mercaptans
10 Low molecular weight organic acids
11 Volatile organic compounds (VOCs)
If you require information and pellet selection assistance for contaminant
gases not listed here, please consult your Viledon® partner.
Pellet diameter
mm
4.3
Caution
Ignitition temperature ASTM
°C
354
Butane activity
%
27.0
Never enter tanks or other confined areas containing
wet activated carbon. Wet activated carbon will
adsorb oxygen and asphyxiation may result.
H2S capacity
(lbs H2S / ft media) –
at 1 PPM H2S, 100 ft /min
2.0
ft3
1.4
3
Packaging
Boxes
The figures given are mean values subject to tolerances due to the normal
production variances. Our explicit written confirmation is always­required
for the correctness and applicability of the information involved­in any
particular case. Subject to technical alterations.
02 - GP - 289 - November - 2014 - US
At a glance
Our further Viledon® pellet product range
CCP 104
2
9
10
3
4
CCP 610
7
5
CCP 108
1
2
9
10
3
4
2
9
10
3
4
7
1
7
1
2
3
2
2
8
11
4
8
11
CCP 830
CCP 310
1
11
CCP 810
CCP 210
1
8
3
4
CCP 840
5
1
CCP 510
2
5
8
11
CCP 903
6
5
Pellets are especially recommended for all contaminant gases highlighted in blue
1 Hydrogen sulfide (H2S)
7 Formaldehyde
2 Sulfur dioxide (SO2)
8 Hydrocarbons
3 Other oxides of sulfur
9 Mercaptans
4 Nitrogen oxides (NOX)
10 Low molecular weight organic acids
5 Chlorine
11 Volatile organic compounds (VOCs)
6 Ammonia
Freudenberg Filtration Technologies L.P.
Hopkinsville KY, 42240 / USA
Phone 1 800 348 7196 | Fax 1 270 887 5114
[email protected] | www.freudenberg-filter.us
Please note:
Other pellets are available on request – especially custom formulations
with impregnations for specific contaminants gases. All application information provided are subject to on-site conditions, specific application
requirements and potential alternating effects by combining several
­Viledon® pellets in multi-stage units. Please consult your local Viledon®
partner for further information.
Replaces all previous issues of this data sheet. Viledon® is a registered and protected trademark of Carl Freudenberg KG.
1