SPRAYER - MEYCO VERSA Atlas Copco Technical specification concrete spraying equipment
Atlas Copco concrete spraying equipment SPRAYER - MEYCO VERSA Technical specification The MEYCO VERSA is the all-in-one concrete spraying mobile for mid-size civil engineering tunnels. It comes equipped with Atlas Copco MEYCO’s Mezza boom for even more stable spraying. Standard features »»Concrete spraying pump •Suprema double piston pump with MEYCO Push-over system for minimum pulsation •Automatic reverse function for pressure relief (blockage) •Wear optimized components for maximum service life •Sturdy hopper and grill design for concrete containing fibers »»Boom •Telescopic boom MEYCO Mezza with new slide system »»Dosing system •Dosa high accuracy dosing system for liquid accelerators with instant adjustment of accelerator volume with flow meter and rotor/stator-pump •Real-time adjustment of accelerator volume •Auto-stop for accelerator under dosage •Low maintenance, pulsation free pumping optimized for alkali free accelerators. Low maintenance, pulsation free pumping optimized for alkali free accelerators. »»Spraying system •Wet mix concrete spraying system »»Control System •PLC control system in easy access control box •Data logging for production data •RRC Radio Remote control »»Carrier •Sturdy, carrier with single-wheel drive (4 ea.) and steering, including crabwalk, ABS and TCS •Diesel engine US EPA Tier 4 final, EU stage IV •Open drivers cabin with protective roof, FOPS and ROPS •Robust front stabilizers »»General •Dual pressure pump for water and High-pressure water cleaner with hose reel •LED working lights •Water and liquid accelerator tank •Connection for external air supply •Manual central lubrication for pump unit and boom (hand pump) •Concrete release agent hand sprayer •Portable fire extinguisher •Toolbox MEYCO VERSA Specifications »»Boom Working range Mezza •Max height..................................................................... 9.5 m •Max width....................................................................... 16 m •Spraying head movement..........................................120/360° •Nutation...............................................................................8° »»Hydraulic system •Hydraulic pumps.................................................................. 2 •Hydraulic oil tank volume.............................................. 200 l •Electric motor...............................................................37 kW •Filtration........................................................................ 10 μm »»Water System •High pressure water cleaner........................ 900 l/h at 200 bar •High pressure water hose................................................ 15 m •Water pump max capacity .......................... 900 l/h at 200 bar •Water tank.............................................................. 160 - 180 l »»Concrete spraying pump / Dosing pump •Concrete pump capacity.............................. 20 m3/h at 50 bar (max theoretical) •Dosing pump max capacity......................... 24 l/min at 10 bar (hydraulic drive) •Feeding hopper volume.................................................. 250 l •Feeding hopper height............................................. 1300 mm •Pump cylinder.......................................................... ø150 mm •Hydraulic cylinder..................................................... ø80 mm •Piston stroke............................................................... 600 mm •Manual central lubrication for pump unit and boom (hand pump) »»Electrical System •Supply voltage...............................................3x 400 V/50 Hz •Power with compressor...............................................115 kW •Power without compressor............................................40 kW »»Miscellaneous •Standard accelerator tank................................................ 650 l •Concrete release agent hand sprayer................................... 5 l •Diameter of nozzle system.................................... 100/65 mm •Working lights LED 24 VDC....................................5x 50 W •Fire extinguishers »»Carrier •MEYCO Carrier plattform •Engine Deutz 4 cylinder TD3.6, USE EPA Tier 4, EU stage III B •Power rating ......................................... 55.5 kW at 2600 rpm •Torque.................................................... 330 Nm at 1600 rpm •4-Wheel steering ..................................... ±25° steering angle •3 Driving modes.............. 4-wheel, front-wheel, crab steering •Seat 90° sideways for tramming in both directions •Electronic controlled 4-wheel drive •Hydrostatic power steering system •Hydrostatic transmission •Frame central joint, oscillation........................................±15° •Rims ....................................................................13.00 x R20 •Tyres ....................................................................16.00 x R20 •Hydraulic stabilizers, front................................................... 2 •Service brakes ..........................................................2 circuits •Emergency and parking brakes ....................................SAHR •Fuel tank .......................................................................... 80 l •Exhaust catalyzer •Electronic ABS/TCS •Electric system................................................................24 V •Batteries .........................................................2x 12 V, 70 Ah •Tramming lights........................................................4x 70 W •Brake lights •Gradability at max. load on drive wheels........................30% •Horn, and reverse alarm MEYCO VERSA Optional Equipment »»Boom •Automated central lubrication system VOGEL »»Air System •Rotary vane compressor (Mattei) .75 kW, 11.0 m3/ min, 7 bar »»Water System •Water hose reel, hydraulic driven hose 100 m »»Electrical system •Heater for control box •Control box stainless steel »»Carrier •Fire suppression system •Hydraulic stabiliziers rear ANSUL »»Control system •Connection cable to RRC Radio Remote Control »»Miscellaneous •Heating and insulation of accelerator tank »»Parts and Services •VERSA design is based on common spare parts of existing MEYCO machines •Maintenance service kits •Suggested stocking guides MEYCO VERSA Measurements »»Dimensions •All dimensions are shown in millimetres 00 3920 COVERAGE AREA - MEZZA BOOM 0m 1m 2m 3m 4m 5m 6m 7m 8m 8m 0m 1m 2m 3m 4m 5m 6m 7m 8m 9m 7m 8m 6m 5m 7m 4m 6m 60 3m 5m ° 90 2m ° 1m 4m 3000 0m 3m 90 ° 1m 2m 2m 3m 1m 25 ° 4m 0m 5m 6m 1m 7m 2m 8m 0m 1m 2m 3m 4m 5m 6m 7m 8m 3m 0m DIMENSIONS mm 1m 2m 3m 4m 5m 6m 7m TRAMMING SPEED km/h On flat ground (rolling resistance 0.05) 18 On incline 1:8 7.8 Width 2 200 Width with conveying line 2 200 Height 2 600 Length 7 820 WEIGHT Ground clearance (with standard tires) 350 gross weight Hopper filling height 1 300 kg Total 11 500 Without compressor 10 200 8m 09/2014 R68 R3 500 350 18Ā 12Ā 2600 2200 7820 © Copyright 2014, Atlas Copco MEYCO AG, Winterthur, Switzerland. All product names in this publication are trademarks of Atlas Copco. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific information. TOP VIEW - TURNING RADIUS 9851 6628 01c SIDE VIEW TRAMMING MODE
© Copyright 2024