Intermot Hydraulic Motors IAMD Series TECHNICAL CATALOGUE INDEX MOTOR TECHNICAL DATA Pag. 2 IAMD H3 SERIES Pag. 3 IAMD H4 SERIES Pag. 7 IAMD H5 SERIES Pag. 12 IAMD H6 SERIES Pag. 16 IAMD H7 SERIES Pag. 21 IAMD H8 SERIES Pag. 26 FLOW DISTRIBUTORS Pag. 31 ACCESSORIES Pag. 32 The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 1 [email protected] Motor Technical Data Dry Mass Max case pressure Max back pressure Temperature range Peak Max Cont. Peak Max Int. Max Cont. Specific Torque Displacement Speed Max Power IAMD H8 IAMD H7 IAMD H6 IAMD H5 IAMD H4 IAMD H3 MODEL N° of pistons Pressure kW kg bar bar °C 68 6 70 -30 ÷ +70 92 6 70 -30 ÷ +70 173 6 70 -30 ÷ +70 308 6 70 -30 ÷ +70 405 6 70 -30 ÷ +70 590 6 70 -30 ÷ +70 cm /rev 3 Nm/bar 397 6.3 270 320 350 750 860 120 452 7.2 270 320 350 750 760 120 500 491 7.8 270 320 350 750 690 120 700 714 11.4 270 320 350 500 580 150 792 12.6 270 320 350 450 520 150 1000 992 15.8 270 320 350 355 405 150 1400 1376 21.9 270 320 350 410 470 200 1648 26.2 270 320 350 370 425 200 1800 1815 28.9 270 320 350 340 390 200 2200 2126 35.1 270 320 350 325 375 235 2525 40.2 270 320 350 285 325 235 400 450 800 1600 5 5 5 2500 bar rpm 5 3000 2983 47.5 270 320 350 235 270 235 3500 3479 55.4 270 320 350 210 240 235 3900 3907 62.2 270 320 350 175 200 258 4300 4343 69.1 270 320 350 160 185 258 4616 73.5 270 320 350 150 170 258 5000 5088 81 270 320 350 140 160 258 5400 5384 85.7 270 320 350 130 150 258 6000 5966 95 250 290 350 120 140 215 6500 6581 104.7 250 290 350 120 140 215 6800 6962 110.8 250 290 350 120 140 215 7600 7620 121.3 230 290 90 100 215 8000 8062 128.3 220 280 80 90 215 4600 7 190 180 The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 2 [email protected] Intermot Hydraulic Motors IAMD Series H3 Models IAMD 400 – 450 – 500 H3 INDEX TECHNICAL DATA Pag. 4 IAMD 400 – 450 – 500 H3 Pag. 5 ORDERING INSTRUCTIONS Pag. 6 The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 3 [email protected] IAMD H3 Technical data 500 Dry Mass Max case pressure Max back pressure Temperature range 5 Max Power 450 kW kg bar bar °C 68 6 70 -30 ÷ +70 6.3 270 320 350 750 860 120 452 7.2 270 320 350 750 760 120 491 7.8 270 320 350 750 690 120 bar Peak Max Cont. 397 Peak Nm/bar Max Int. cm3/rev Max Cont. Specific Torque IAMD H3 400 Speed Displacement N° of pistons MODEL Pressure rpm The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 4 [email protected] IAMD H3 Dimensional drawings IIA AM MD D 440000 –– 445500 –– 550000 H H33 SHAFTS A0: Standard splined shaft The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 5 [email protected] IAMD H3 Ordering instructions IAMD ___ H3 A_ D__ SB_ Model Displacement 400 cc/rev 450 cc/rev 500 cc/rev Housing Shaft A0 – Standard splined shaft Distributor D40 – 1” BSP D47 – SAE 1” 3000 psi flange Splined Billet SB3 - 36 UNI 221 EXAMPLE : IAMD 500 H3 A0 D40 The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 6 [email protected] Intermot Hydraulic Motors IAMD Series H4 Models IAMD 700 – 800 – 1000 H4 IAMD 700/C – 800/C H4 INDEX TECHNICAL DATA Pag. 8 IAMD 700 – 800 – 1000 H4 Pag. 9 IAMD 700/C – 800/C H4 Pag. 10 ORDERING INSTRUCTIONS Pag. 11 The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 7 [email protected] IAMD H4 Technical data 1000 Dry Mass Max case pressure Max back pressure Temperature range 5 Max Power 800 kW kg bar bar °C 92 6 70 -30 ÷ +70 11.4 270 320 350 500 580 150 792 12.6 270 320 350 450 520 150 992 15.8 270 320 350 355 405 150 bar Peak Max Cont. 714 Peak Nm/bar Max Int. cm3/rev Max Cont. Specific Torque IAMD H4 700 Speed Displacement N° of pistons MODEL Pressure rpm The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 8 [email protected] IAMD H4 Dimensional drawings IIA AM MD D 770000 –– 880000 –– 11000000 H H44 SHAFTS A0: Standard splined shaft A1: Splined shaft on request The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 9 [email protected] IAMD H4 Dimensional drawings IIA AM MD D 770000//C C –– 880000//C CH H44 SHAFTS A3: Internal splined shaft Option FL2 The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 10 [email protected] IAMD H4 Ordering instructions IAMD ___ /_ H4 A_ D__ SB _ Model Displacement 700 cc/rev 800 cc/rev 1000 cc/rev Interchangeability /C Housing Shaft A0 – Standard splined shaft A1 – Special splined shaft A3 – Female shaft Distributor D40 – 1” BSP D47 – SAE 1” 3000 psi flange Spline billet SB4 – 46 UNI 220 SB5 – 46 UNI 221 EXAMPLE : IAMD 800 H4 A0 D40 The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 11 [email protected] Intermot Hydraulic Motors IAMD Series H5 Models IAMD 1400 – 1600 – 1800 H5 INDEX TECHNICAL DATA Pag. 13 IAMD 1400 – 1600 – 1800 H5 Pag. 14 ORDERING INSTRUCTIONS Pag. 15 The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 12 [email protected] IAMD H5 Technical data 1800 Dry Mass Max case pressure Max back pressure Temperature range 5 Max Power 1600 kW kg bar bar °C 173 6 70 -30 ÷ +70 21.9 270 320 350 410 470 200 1648 26.2 270 320 350 370 425 200 1815 28.9 270 320 350 340 390 200 bar Peak Max Cont. 1376 Peak Nm/bar Max Int. cm3/rev Max Cont. Specific Torque IAMD H5 1400 Speed Displacement N° of pistons MODEL Pressure rpm The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 13 [email protected] IAMD H5 Dimensional drawings IIA AM MD D 11440000 –– 11660000 –– 11880000 H H55 SHAFTS A0: Standard splined shaft A31: Internal splined shaft on request The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 14 [email protected] IAMD H5 Ordering instructions IAMD ___ H5 A_ D__ SB_ Model Displacement 1400 cc/rev 1600 cc/rev 1800 cc/rev Housing Shaft A0 – Standard splined shaft A31 – Internal splined shaft on request Distributor D75 Splined Billet SB6 – 62 UNI 221 EXAMPLE : IAMD 1600 H5 A0 D90 The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 15 [email protected] Intermot Hydraulic Motors IAMD Series H6 Models IAMD 2200 – 2500 – 3000 – 3500 H6 IAMD 2200/C – 2500/C – 3000/C – 3500/C H6 INDEX TECHNICAL DATA Pag. 17 IAMD 2200–2500–3000–3500 Pag. 18 IAMD 2200/C – 2500/C – 3000/C 3500/C H6 Pag. 19 ORDERING INSTRUCTIONS Pag. 20 The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 16 [email protected] IAMD H6 Technical data Max Power Dry Mass Max case pressure Max back pressure Temperature range 2500 kW kg bar bar °C 308 6 70 -30 ÷ +70 270 320 350 325 375 235 2525 40.2 270 320 350 285 325 235 Peak 35.1 bar Max Cont. 2126 Peak Nm/bar Max Int. cm3/rev Max Cont. Specific Torque IAMD H6 2200 Speed Displacement N° of pistons MODEL Pressure rpm 5 3000 2983 47.5 270 320 350 235 270 235 3500 3479 55.4 270 320 350 210 240 235 The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 17 [email protected] IAMD H6 Dimensional drawings IIA AM MD D 22220000 –– 22550000 –– 33000000 –– 33550000 H H66 SHAFTS A0: Standard splined shaft A1: Splined shaft on request A2: Parallel shaft on request A3: Internal splined shaft The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 18 [email protected] IAMD H6 Dimensional drawings IIA AM MD D 22220000//C CH H66 C –– 22550000//C C –– 33000000//C C –– 33550000//C SHAFTS A0: Standard splined shaft A3: Internal splined shaft The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 19 [email protected] IAMD H6 Ordering instructions IAMD ____ /_ H6 A_ D__ SB _ Model Displacement 2200 cc/rev 2500 cc/rev 3000 cc/rev 3500cc/rev Interchangeability /C Housing Shaft A0 – Standard splined shaft A1 – Special splined shaft A2 – Parallel keyed shaft A3 – Internal splined shaft Distributor D90 – SAE 1 ½ “ 6000 psi flange Spline billet SB9 – 82 UNI 221 SB10 – BS 3550 20 T 6/12 EXAMPLE : IAMD 3000 H6 A0 D90 The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 20 [email protected] Intermot Hydraulic Motors IAMD Series H7 Models IAMD 3900 – 4300 – 4600 – 5000 – 5400 H7 IAMD 3900/C – 4300/C – 4600/C – 5000/C – 5400/C H7 INDEX TECHNICAL DATA Pag. 22 IAMD 3900 – 4300 – 4600 5000 – 5400 H7 Pag. 23 IAMD 3900/C – 4300/C – 4600/C 5000/C – 5400/C H7 ORDERING INSTRUCTIONS Pag. 24 Pag. 25 The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 21 [email protected] IAMD H7 Technical data Max Power Dry Mass Max case pressure Max back pressure Temperature range kg bar bar °C 405 6 70 -30 ÷ +70 320 350 175 200 258 4300 4343 69.1 270 320 350 160 185 258 4616 73.5 270 320 350 150 170 258 5000 5088 81 270 320 350 140 160 258 5400 5384 85.7 270 320 350 130 150 258 4600 7 Peak 270 bar Max Cont. 62.2 Peak 3907 Max Int. 3900 Max Cont. Nm/bar N° of pistons Specific Torque kW cm3/rev MODEL IAMD H7 Speed Displacement Pressure rpm The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 22 [email protected] IAMD H7 Dimensional drawings IIA AM MD D 33990000 –– 44330000 –– 44660000 –– 55000000 –– 55440000 H H77 SHAFTS A0: Standard splined shaft A1: Splined shaft on request A21: Parallel shaft on request A2: Parallel shaft A3: Internal splined shaft The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 23 [email protected] IAMD H7 Dimensional drawings IIA AM MD D 33990000//C C –– 55440000//C C –– 44330000//C CH H77 C –– 44660000//C C –– 55000000//C SHAFTS A0: Standard splined shaft A2: Parallel shaft A3: Internal Splined shaft Option FL8 The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 24 [email protected] IAMD H7 Ordering instructions IAMD ____ /_ H7 A_ D__ SB _ Model Displacement 3900 cc/rev 4300 cc/rev 4600 cc/rev 5000cc/rev 5400 cc/rev Interchangeability /C Housing Shaft A0 – Standard splined shaft A1 – Special splined shaft A2 – Parallel keyed shaft A21 – Parallel shaft on request A3 – Internal splined shaft Distributor D90 – SAE 1 ½ “ 6000 psi flange Spline billet SB10 – BS 3550 20 T 6/12 SB11 – 102 UNI 222 EXAMPLE : IAMD 4300 H7 A1 D90 The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 25 [email protected] Intermot Hydraulic Motors IAMD Series H8 Models IAMD 6000 – 6500 – 6800 – 7600 – 8000 H8 IAMD 6000/C – 6500/C – 6800/C – 7600/C – 8000/C H8 INDEX TECHNICAL DATA Pag. 27 IAMD 6000 – 6500 – 6800 – 7600 – 8000 H8 Pag. 28 IAMD 6000/C – 6500/C – 6800/C 7600/C – 8000/C H8 ORDERING INSTRUCTIONS Pag. 29 Pag. 30 The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 26 [email protected] IAMD H8 Technical data Max Power Dry Mass Max case pressure Max back pressure Temperature range kg bar bar °C 290 350 120 140 215 6500 6581 104.7 250 290 350 120 140 215 6800 6962 110.8 250 290 350 120 140 215 7600 7620 121.3 230 290 90 100 215 8000 8062 128.3 220 280 80 90 215 190 180 Peak 250 bar Max Cont. 95 Peak 5966 Max Int. 6000 Max Cont. Nm/bar N° of pistons Specific Torque kW cm3/rev MODEL IAMD H8 Speed Displacement Pressure rpm 590 6 70 -30 ÷ +70 The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 27 [email protected] IAMD H8 Dimensional drawings IIA AM MD D 66000000 –– 66550000 –– 66880000 –– 77660000 –– 88000000 H H88 SHAFTS A1: Standard splined shaft A2: Parallel shaft A11: Splined shaft on request A22: Parallel shaft on request A5: Splined shaft on request The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 28 [email protected] IAMD H8 Dimensional drawings IIA AM MD D 66000000//C C –– 88000000//C C –– 66550000//C CH H88 C –– 66880000//C C –– 77660000//C SHAFTS A0: Standard splined shaft A2: Parallel shaft on request A3: Internal splined shaft The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 29 [email protected] IAMD H8 Ordering instructions IAMD ____ /_ H8 A_ D__ SB _ Model Displacement 6000 cc/rev 6500 cc/rev 6800 cc/rev 7600cc/rev 8000 cc/rev Interchangeability /C Housing Shaft A0 – Standard splined shaft A1 – Special splined shaft A11 – Splined shaft on request A2 – Parallel keyed shaft A22 – Parallel shaft on request A3 – Internal splined shaft A5 – Splined shaft on request Distributor D200 Spline billet SB12 EXAMPLE : IAMD 6800 H8 A1 D200 The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 30 [email protected] D 200 D 90 D 75 D 47 D 40 Flow distributors Distributor with 1” BSP ports For IAMD H3 – IAMD H4 Distributor with SAE 1” 3000 psi flanges For: IAMD H3 – IAMD H4 For: IAMD H5 Distributor with SAE 1 ½” 6000 psi flanges For: IAMD H5 – IAMD H6 – IAMD H7 For: IAMD H8 The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 31 [email protected] TA TB Tacho drive code EST TQ1 Tacho drive code TB Tacho drive TT1 Tacho drive code TA EST Tachometers Tacho drive code TQ1 code TT1 The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 32 [email protected] SB5 SB4 SB3 Spline billets Only for: IAMD 400 – 450 – 500 H3 Only for: IAMD 700 – 800 – 1000 H4 A0 Only for: IAMD 700 – 800 – 1000 H4 A1 The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 33 [email protected] SB6 Only for: IAMD 1400 – 1600 – 1800 H5 A0 SB9 Only for: IAMD 2200 – 2500 – 3000 – 3500 H6 A0 IAMD 2200/C – 2500/C – 3000/C – 3500/C H6 A0 SB10 Only for: IAMD 2200 – 2500 – 3000 – 3500 H6 A1 IAMD 3900 – 4300 – 4600 – 5000 – 5400 H7 A1 The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 34 [email protected] SB11 IAMD 3900 – 4300 – 4600 – 5000 – 5400 H7 A0 SB12 Only for: Only for: IAMD 3900/C – 4300/C – 4600/C – 5000/C – 5400/C H7 A0 IAMD 6000/C – 6500/C – 6800/C – 7600/C – 8000/C H8 A0 The data specified into this catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Intermot reserves the right to implement modification without notice. www.intermot.com DOC 140522.0 35 [email protected]
© Copyright 2024