+7 ϼ ໚ૈВྣமࡋໆෳБਢ ϼ

+7 ϼ໚ૈВྣமࡋໆෳБਢ
SOLAR-02 㗗ᶨ⎘䱦ⶏ✳䘬⣒春㖍䄏⻟⹎姀抬☐
z 慷㷔嬨ῤ⎗ẍ⌛㗪栗䣢烊㚨⣂⎗ẍ⃚⬀ 3 䳬㖍䄏慷㷔デ
ㅱ☐⍫㔠
z ⎗㍍ Reference Cell (⇑䓐⶚⍾⼿ᾖ㬋⍫㔠䘬⣒春傥㧉
䳬䔞デㅱ☐Ἦ慷㷔烊╖㘞ㆾ⣂㘞䘮⎗) ㆾ㗗
Pyranometers (⇑䓐䅙暣➮(thermopile sensor)Ἦ䔞デㅱ
☐慷㷔)
z ㍍ᶲ㹓⹎デㅱ☐Ṏ⎗慷㷔䑘⠫㹓⹎⍲⣒春傥㜧䘬㹓⹎烊
z 㨇⎘㛔幓⎗ẍ慷㷔⣒春傥㜧䘬奺⹎(栆Ụ㯜⸛₨䘬≇傥)
z 妲嘇廠↢ṳ朊㚱 USB ␴ RF ℑ䧖炻⎗ẍ␴℞Ṿ HT ↢
⑩䘬䚠斄₨☐䚜㍍忋≽忚埴姀抬ㆾ嬨⍾㔠㒂
ᷣ㨇ᶵ⏓デㅱ☐暨怠岤
PT300N 㹓⹎デㅱ☐
HT304N 㖍䄏⻟⹎デㅱ☐
PT300N ⎴㗪℟㚱ℑ䳬㹓⹎デㅱ☐
⎗慷㷔 䑘㐔㹓⹎ẍ⍲ ⣒春傥㜧䘬㹓⹎
HT304N 㗗姕妰䓐Ἦ慷㷔⣒春㖍䄏⻟⹎䓐䘬デㅱ☐
z ╖㘞ㆾ⣂㘞⺷䘮⎗㓗㎜
z ⇑䓐␴ⶪⓖ⣒春傥㜧䚠⎴㛸岒 ㆸ䘬⍫䄏㧉䳬
(Reference cell)炻⃀慷⍾⼿␴ⶪⓖ⣒春傥㜧庫䁢㍍役䘬
㔠ῤ烊Ữ㭷ᾳデㅱ☐↢屐㗪悥㚫㍸ὃ℞䈡⿏⍫㔠烊㇨ẍ
⛐惵⎰ SOLAR-02 慷㷔㖍䄏⻟⹎㗪⎗ẍ㍸ὃ庫䁢㸾䡢
䘬㖍䄏⻟⹎ῤ
!
ԅ‫ׇ‬ӊོ޴ӉԢ१ϲѥ!SBEJPUFL!DPSQPSBUJPO!
⎘⊿烉ᶱ慵ⶪ慵㕘嶗Ḽ㭝 609 ⶟ 16 嘇 5 㦻ᷳ 7
TEL:02-22782269 FAX:02-22782059
㕘䪡烉㕘䪡䷋䪡⊿ⶪ⎘⃫ 26 嘇 4 㦻ᷳ 10
TEL:03-552-6779 FAX:03-552-6739
⎘⋿烉TEL:06-204-3276 FAX:06-204-3096ġ ġ
㜙卆烉⺋㜙䚩㜙卆ⶪ⋿❶⋨⬷⚾嶗叔䥹.慹➇厗⹄3 㢇2 ╖⃫2602 ⭌
TEL: 0769-22365900ġ FAX: 0769-223633466
喯ⶆ烉㰇喯䚩喯ⶆⶪ㟸㴯⊿嶗 26-6 嘇⿮Ⲙ⣏⹰ 2F268 ⭌
TEL:0512-65236999 FAX:0512-65235999
Home page: www.radiotek.com.tw
E-mail : [email protected]
HT
62/$5
Ьᐒଛӝ +71 Ϸ 371
SOLAR-02
Rel. 1.00 of 24/03/10
Remote unit for connection to master PV instruments
Pag 1 of 1
1. TECHNICAL SPECIFICATIONS
Accuracy is defined to reference conditions: temperature 23°C, humidity <80%RH
Irradiation
Range [W/m2]
0 y 1400
Resolution [W/m2]
1 + INT (100 * 0.1/K)
Accuracy
r(1.0%rdg + INT(1000 * 0.1/K)
K = sensitivity of the probe used to measure irradiation (expressed in mV/kW/m2 or in PV/W/m2)
Probe sensitivity
K<10
Kt10
Range [mV]
0.00 y 15.00
0.00 y 65.00
Resolution [mV]
0.01
0.02
Uncertainty
r(1.0%rdg+0.1mV)
Temperature (with PT300N probe)
Range [°C]
-20.0 y 99.9
Resolution [°C]
0.1
Accuracy
r(1.0%rdg + 1°C)
Resolution [°]
1
Accuracy
r(1.0%rdg + 1°)
Tilting angle
Range [°]
1 y 90
2. GENERAL SPECIFICATIONS
Display:
LCD Custom, 4 dgt (2000 counts) + decimal comma and point
Power supply
Internal batteries:
Battery life:
AutopowerOFF:
4x1.5V alkaline type AAA LR03
approx 480 in continuous operation
after 5 minutes of idleness (in independent mode)
Input connectors
USB port:
PYRA/CELL inputs:
USB 2.0
type Hypertac
Internal memory
Autonomy:
approx 1.5 hours (@ PI master meter = 5s)
Mechanical characteristics
Dimensions:
Weight (included batteries):
120(L)x 65(W) x 35(H)mm ; 5(L)x3(W)x1(H) “
215g (8 ounces)
Environmental conditions
Operating temperature:
Relative operating humidity:
Storage temperature:
Storage humidity:
0° y 40°C
< 80%RH
-10 y 60°C
<80%RH
This instrument complies with the requirements of Directive EMC 2004/108/EC
HT ITALIA srl
宇宏企業股份有限公司
Via della Boaria 40 - 48018 Faenza (RA)- Italy
Tel: +39-0546-621002 - Fax: +39-0546-621144
台北:三重區重新路五段609巷16號6樓之1
新竹:新竹縣竹北市台元26號4樓之10
email: [email protected]
http://www.htitalia.com
TEL:02-22782269
FAX:02-22782059 - web:TEL:03-552-6779
FAX:03-552-6739
http://www.fluke-tektronix.tw
http://www.radiotek.com.tw
HT304N
Rel. 1.00 del 24/08/11
Reference cell for sun irradiation measurement
Pag 1 of 1
WARNINGS ABOUT USE OF REFERENCE CELL HT304N
x
x
x
x
x
x
x
x
x
HT304N is a passive sensor and do not require any power supply
Avoid exposing the instrument to mechanical shock paying additional attention to the glass
Protect the glass against any contact with abrasive surfaces
Do not apply any voltage to instrument’s outputs
Install the sensor in position clear of obstructions that may introduce shading or reflections
effects by distorting the sensor reading
Always check the parallelism between the sensor and the photovoltaic module under
consideration (error max r 2 °). The non-perfect parallelism between the sensor and the PV
module surface could affect the outcome of the measure
The usage of the stirrup is highly recommended. Fix the stirrup in a central position of the PV
module edge. The stirrup is provide of a fixing screw compatible with holes placed on the
back side of the PV module frame
Once positioned the stirrup, insert the sensor into its holder with its connectors oriented
downside (if possible) in order to avoid shadowing effects
Expose the sensor to the test conditions (radiation temperature, inclination) at least 1 minute
before performing the readings in order to avoid working with the sensor not yet in steady
state
1. TECHNICAL SPECIFICATIONS
Irradiation
Range [W/m2]
50 y 1400
Accuracy (*)
r3.0% of readings
(*) Accuracy is grant under the following conditions:
x Temperature: -20 y 50°C ; Incidence angle: 90° r 25° ; Air mass (AM): 1.5
2. GENERAL SPECIFICATIONS
Available reference cells:
MONO Crystalline and MULTI Crystalline Silicon
Guidelines
Safety:
Technical literature:
Calibration:
Mechanical protection:
Pollution degree:
IEC/EN 61010-1
IEC/EN 61187
IEC/EN 60904-2
IP65 in compliance with IEC/EN 60529
2
Mechanical characteristics
Dimensions (LxWxH):
Weight:
120x85x40 mm
260g
Environmental conditions
Working temperature:
Storage temperature:
-20°C y 50°C
-20°C y 60°C
This instrument complies with the requirements of the European Low Voltage Directive 2006/95/CE
(LVD) and EMC Directive 2004/108/CE
HT ITALIA SRL
宇宏企業股份有限公司
Via della Boaria 40 - 48018 Faenza (RA)- Italy
Tel:
+39-0546-621002 - Fax: +39-0546-621144
台北:三重區重新路五段609巷16號6樓之1
新竹:新竹縣竹北市台元26號4樓之10
email:
[email protected]
http://www.ht-instruments.com
TEL:02-22782269
FAX:02-22782059 - web:TEL:03-552-6779
FAX:03-552-6739
http://www.fluke-tektronix.tw
http://www.radiotek.com.tw