1. business and industrial
2. energy
3. oil

powerROC
T50
Surface drill rig for limestone
and cement quarries, open pit
mines, and aggregate quarries.
Hole range: 102–152mm / 4”–6”
trustful performer
with striking efficiency
Everything about the PowerROC T50 says performance and
ease of ownership. its straightforward design and atlas
copco technology provide you with high performance and
reliability.
PowerROC T50 is developed and designed for
the demanding applications of limestone and
aggregate quarries, as well as mines.Thanks
to the new-developed rock drill COP 3060, the
PowerROC T50 provides high penetration rate.
Meanwhile, the perfectly matched engine in
2
Main benefits
Reliability – tough, Atlas Copco quality
High performance - fast penetration rates
give more meters per shift
Easy and quick positioning thanks to the
extendable boom
either Tier 3 or Tier 4 provides more tons per liter
fuel , which results in high efficiency and productivity, while conforming to your local emission
standards.
3
trustful performer
with striking efficiency
Thanks to its modular design and a high degree of commonality with other Atlas Copco products, reserve parts are only
a phone call away thanks to our global service network.
TECHNICAL SPECIFICATIONS
MAIN COMPONENTS
• Track frames with triple grouser pads, cleaning holes and hydraulic
track oscillation and two speed traction
• Extendable boom system
• Motor driven aluminium feed system
• Tier 3 (Stage IIIA) diesel engine / Tier 4 (Stage IIIB) diesel engine, CAT
C9 / CAT C9.3
• Carousel type rod handling system
• Hydraulic rock drill
• Screw type air compressor
• Dust collection system
• Operator’s cabin, ROPS and FOPS certified
+ working faster than you expect
Our rigs are built tough. The PowerROC T50 is designed to operate in environments where productivity, durability, and availability are essential. Its straightforward design and power gives you a workhorse you can depend on year after
year.
+ Get it right the first time
Our rock drills are known for their high efficiency and constant hole bottom
contact due to the double dampening system. Not only does PowerROC T50
have the powerful COP 3060 rock drill, we’ve also matched it with an Atlas Copco air compressor that provides sufficient amounts of air to ensure a high quality
hole. The PowerROC T50 is also equipped with aluminium feed instead of a steel
feed, for much straighter and more consistent holes.
+ Put holes in the ground and not in your
pocket
When it comes to work, the PowerROC T50 is all business and easy to own.
Simplified hydraulic and electrical systems ensure easier operation and less
downtime. All vital functions are at your fingertips for excellent drilling control.
Because we understand that long work shifts can drain an operator’s energy
and productivity, for added comfort the cabin has great visibility, extra vibration
dampers, and is ROPS- and FOPS- certified.
ATLAS COPCO SERVICE
– Easy operation
and
maintenance
+ WORLD CLASS SERVICE
FlexiROC T35the
and FlexiROC
T40 areequipment
flexible and versatile requires regular service to
Even
best
tophammer drill rigs,
developed and designed
for high perensure
optimal
performance.
Atlas Copco provides
formance
in
demanding
construction
applications.
They are
service solutions to safeguard
an optimized relationship
also a very efficient alternative
for small and medi um sizeavailability and operational cost.
between
productivity,
quarrying jobs.Copco
Even in tough terrain
conditions, utilization
Atlas
Mining
and Rock Excavation Technique has
of
the
rig
is
high,
thanks
to
the
long
reach
of the boom, located in over 80 countries. By
over 3300 technicians
FlexiROC T35 and FlexiROCthe
T40 are flexible
and versatile
combining
usage
of Atlas Copco genuine parts with
tophammer
drill
rigs,
developed
and
designed
service provided byfor ahighcertified Atlas Copco technician,
performance have
in demandinga winning combination no matter of where
you’ll
in the world you operate.
4
engine
COMPRESSOR
CAT turbo charged, diesel engine C 9, Tier 3 / Stage IIIA
Power rating at 1 800 rpm
261 kW
350 HP
CAT turbo charged, diesel engine C 9.3, Tier 4 / Stage IIIB
Power rating at 1 800 rpm
261 kW
350 HP
Atlas Copco C146, screw type air compressor
Working pressure, max
10.5 bar
FAD, at normal working pressure
232 l/s
feed
Voltage
Batteries
Alternator
Work lights, front
Work lights, rear
Work lights, feed
Warning lamp and reverse alarm buzzer
152 psi
492 cfm
electrical system
Feed extension
1 900 mm
6’3’’
Feed rate, max
Feed force, max
Tractive pull, max
Total length
Travel length
0.7 m/s
50 kN
50 kN
9 370 mm
5 400 mm
138 ft/min
11 240 lbf
11 240 lbf
30’9’’
17’7’’
dust collector
24 V
2 x 12 V, 235 Ah
24 V, 95 A
4 x 70 W
2 x 70 W
2 x 70 W
volumes
Filter area
Number of filter elements
20 m2
20 pcs.
215 sq.ft
Cleaning air pressure, max
Cleaning air consumption
8.0 bar
2–4 l/pulse
116.0 psi
4–8 cfm
hydraulic system
Hydraulic oil cooler
Max ambient temperature
50°C
Hydraulic oil tank
Hydraulic system, total
Compressor oil
Diesel engine oil
Diesel engine, cooling water
Diesel engine, fuel tank
Traction gear
Lubrication tank (ECL)
380 l
470 l
55 l
30 l
51 l
500 l
3l
5.3 l
100 US gal
124 US gal
14.7 US gal
7.9 US gal
13.5 US gal
132 US gal
0.8 US gal
1.4 US gal
122°F
Hole range
Drill steel
type
Type of drilling
Drilling diameter
mm
inch
Single pass
T51, T-Wiz 60
Extension drilling
102 – 152
4’’– 6’’
Max. hole depth
Drill steel length
m
feet
mm
feet
4.27
14’
4270/3660/6096
14’/12’/20’
35
118’
4270 x 7
14’ x 7
3660 x 7
12’ x 7
Hydraulic rock drill
Rock drill
COP 3060
Impact power
30 kW
40.2 hp
Hydraulic pressure
Impact rate
240 bar
3 481 psi
50 Hz
225 bar
3263 psi
43 Hz
Torque, max
2 770 Nm
2 043 lbf/ft
Weight approx
355 kg
783 lb
5
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
coverage areas and swing angles
Powerful rock drill COP 3060:
High penetration rate and high
performance
Aluminum feed beam with chain
feed: long service interval, low
service cost.
Strong extendable boom:
Robust for tough work conditions, easy positioning.
Rod handling capacity: 7 + 1
to drill up to 35 m in depth
Horizontal reach (mm)
dimensions and weight
Transport dimensions
Height
3 485 mm
11’5”
Length
10 900 mm
35’9”
Width
2 500 mm
8’2”
9 370 mm
30’9’’
Feed height
Weight
Tier 3 / Stage IIIA
22 800 kg
50 265 lb
Tier 4 / Stage IIIB
23 900 kg
52 690 lb
Vertical reach (mm)
Horizontal hole drilling
optional equipment
Carrier
•Hydraulic support leg
• Super rotation system
•Service hand lights inside canopy
•Combined warning sound and warning light, beacon type
• Engine air filter pre-cleaner
•Compressor air filter pre-cleaner
•Electric pump for filling hydraulic oil
•Electric fuel filling pump
•Fast fuel filling system
•Cold weather kit +5oC to -25oC, including diesel engine heater and
compressor regulation heating kit
•Rock drill lubrication oil collection system
Safety cabin
•Radio
•Reverse camera with cab mounted monitor
Hole measuring systems
•2D angle indicator
•3D angle indicator
6
Lube oil, lube system and water mist system
•Central lubrication system
•Thread greasing device, spray system
•Artic hydraulic oil, VG 32
•Tropical hydraulic oil, VG 68
•Biological hydraulic oil, VG 46
•Water mist system with water pump and 400 water tank
Feed
•Wide feed foot
•RHS for T51 - 12’/14’ SPEEDROD
•RHS for T51 - 12/14’ with 72 mm coupling
•RHS for T-Wiz 60 - 12’/14’ SPEEDROD
•RHS for T-Wiz 60 - 12/14’ with 85 mm coupling
• Sleeve retainer
Delivered equipment, not mounted
•Conversion kit T51
•Conversion kit T-Wiz 60
Feed swing angles
Rear view
7
2014-11 Nanjing, China. Legal Notice © Copyright 2014, Atlas Copco Construction and Mining Equipment Co., LTD. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos
may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for
specific information.
COMMITTED TO SUSTAINABLE PRODUCTIVITY
We stand by our responsibilities towards our customers,
towards the environment and the people around us.
We make performance stand the test of time.
This is what we call — Sustainable Productivity.
www.atlascopco.com