Readme File for Cisco Prime Network Change
and Configuration Management 3.11 Patch 2
Revised: November 17th, 2014
This document supports the release of the Cisco Prime Network Change and
Configuration Management 3.11 Patch 2, which is installed on top of Cisco Prime
Network 3.11.
Note: It is recommended to install Change and Configuration Management 3.11 Patch 2
on top of Change and Configuration Management 3.11 Patch 1
Note: All changes described in this document apply only to Cisco Prime Network Change
and Configuration Management 3.11 Patch 2.
Table of Contents
1
Obtaining the PN 3.11 CCM Patch 2
1
2
PN 3.11 CCM Patch 2 Contents
2
3
Installing the PN 3.11 CCM Patch 2
2
4
Resolved Caveats – PN 3.11 CCM Patch 2
2
5 Resolved Caveats – PN 3.11 CCM Patch 1
3
6 Obtaining Documentation, Support and Security Guidelines
3
1 Obtaining the PN 3.11 CCM Patch 2
To obtain the Cisco Prime Network 3.11 Change and Configuration Management Patch 2
for installation, contact Cisco Advance Services. This patch can be downloaded from
Cisco.com.
All contents are Copyright © 2012 Cisco Systems, Inc. All rights reserved.
Page 1
2 PN 3.11 CCM Patch 2 Contents
Cisco Prime Network 3.11 CCM Patch 2 contains:
 The necessary files and scripts to upgrade successfully.
 Resolved caveats, identified in Resolved Caveats – Cisco Prime Network 3.11 CCM
Patch 2.
3 Installing the PN 3.11 CCM Patch 2
This procedure describes how to install the Cisco Prime Network 3.11 CCM Patch 2 on
top of an existing Cisco Prime Network 3.11 installation.
Installation Procedure
1. Log into the Cisco Prime Network gateway as Prime Network user.
Copy the Patch file PN_CCM_3.11.2.zip to Prime Network Home directory
<$ANAHOME>
2. To extract the necessary JAR files and scripts, enter the following commands:
cd $ANAHOME
unzip PN_CCM_3.11.2.zip
Give Executable permissions for the directory PN_CCM_3.11.2 using following
command:
chmod –R 777 PN_CCM_3.11.2
To install the PN 3.11 CCM Patch 2 and create the backup files, enter:
cd $ANAHOME/PN_CCM_3.11.2
./PN_CCM_311PP2_PatchUpgrade.tcsh
3. Wait until the Prime Network Web Server is up and running. Normally it takes about
10 to 15 minutes for Prime Network Web Server to be up and running. To verify this,
enter the following command:
dmctl status
4. Verifying the PN 3.11 CCM Patch 2 Installation:
The install log file PN_CCM_Upgrade_3112.log will be available at
$XMP_HOME. Check for any errors in this log file. If there are no errors in the
log file then Prime Network 3.11 Change and Configuration Management Patch 2
is installed successfully
4 Resolved Caveats – PN 3.11 CCM Patch 2
The following caveats have been fixed in Cisco Prime Network 3.11 CCM Patch 2.
All contents are Copyright © 2012 Cisco Systems, Inc. All rights reserved.
Page 2
Identifier
Summary
Explanation
CSCui93281 NCCM 3.11 - ReDesigning Configuration Change Logs
Fixed
CSCuh82923 Make upper limit of config archive to keep configurable
Fixed
CSCui35119
Fixed
NCCM - config restoration fail in device banner
5 Resolved Caveats – PN 3.11 CCM Patch 1
The following caveats have been fixed in Cisco Prime Network 3.11 CCM Patch 1.
Identifier
Summary
Explanation
ASR5500 / StarOS deivces shows wrong "Change Date" in config
CSCuj53762 viewer
Fixed
CSCuo51570 Config archive setting should not be changed while job is running
Fixed
6 Obtaining Documentation, Support and Security
Guidelines
For information on obtaining documentation, obtaining support, providing documentation feedback, security
guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in
Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures
included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 1999-2012 Cisco Systems, Inc. All rights reserved.
All contents are Copyright © 2012 Cisco Systems, Inc. All rights reserved.
Page 3