November 2014 New Parts Release A-RE527400 Starter

November 2014 New Parts Release
A-RE527400
Starter
For Models: John Deere (TRACTOR: 1654, 1854, 2054, 6105M, 6105R, 6115M, 6115R, 6125M, 6125R,
6130, 6130M, 6130R, 6140M, 6140R, 6150M, 6150R, 6170M, 6170R, 6190R, 6210R, 6225, 6230, 6230
PREMIUM, 6325, 6330, 6330 PREMIUM, 6425, 6430, 6430 PREMIUM, 6525, 6530, 6530 PREMIUM, 6534,
6630, 6630 PREMIUM, 6830, 6830 PREMIUM, 6930, 6930 PREMIUM, 7130, 7230, 7330, 7330 PREMIUM,
7420, 7430 PREMIUM, 7430E PREMIUM, 7520, 7530 PREMIUM, 7530E PREMIUM, SE6920),
(SPRAYER: 4630)
A-451590R91
Bearing
Dim/Info:
ID - 1.181"
OD - 2.165"
Width - .510"
For Models: Case-IH (INDUSTRIAL/CONSTRUCTION: (2504, 2544, 2606, 2656 ALL Clutch Shaft)), (TRACTOR: (330, 340, 460, 504, 544, 606, 656, 664 ALL Clutch Shaft), (430, 470, 530, 570 ALL Pilot Bearing))
A-AE74056
Idler Gear Bearing
Dim/Info:
ID - 1.574"
OD - 3.149"
Width - .707"
For Models: John Deere (MOWER CONDITIONER: 525, 530, 535, 625, 630, 635, 730, 735, 830, 835, 915,
916, 925, 926, 935, 936, 945, 946, 955, 956)
A-T38017
Auger Thrust Washer
Dim/Info:
ID - 1.006"
OD - 1.545"
Width - .092"
For Models: Case-IH (COMBINE: 1620, 1640, 1644, 1660, 1666, 1680, 1682, 1688, 2144, 2166, 2188,
2344, 2366, 2377, 2388, 2577, 2588)
A-87379133
Straw Chopper Deflector Pan
For Models: Case-IH (COMBINE: 1480, 1680, 1688, 2188, 1682, 1482, 2388, 2377, 2577, 2588)
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
www.allpartsstore.com
November 2014 New Parts Release
A-RE527550
Head Gasket Set
For Models: John Deere (INDUSTRIAL/CONSTRUCTION: (250D, 300D ALL Davenport SN <609165 / NonDavenport SN <201811), 530B, 535, 644G, (560D, 644H, 748GII ALL Engine SN <199999), 660D, 724J,
748GIII Engine SN <1999999, 748GIII SN 604614>, 762B Late Engine, (770C, 770CH, 772CH ALL Series II
SN 582130>), (770C, 770CH, 772CH ALL SN <582129), 848G, 850C Late Engine, 850CII),
(TRACTOR: (7710, 7810 ALL SN <0899999), 8100, 8100T, 8110, 8110T, 8120, 8120T, 8200, 8200T,
8210, 8210T, 8220, 8220T, 8300, 8300T, 8310, 8310T, 8320, 8320T, 8400, 8400T, 8410, 8410T, 8420,
8420T, 8520, 8520T, 9100, 9120), (COMBINE: 9510, 9510SH, 9550, 9550SH, 9610, 9650, 9650CTS,
9650STS, 9750STS, (9780CTS, 9780I CTS ALL SN 072800>), CTS II), (COTTON PICKER: 9970, 9976, 9986),
(FORAGE HARVESTER: 6610, 6650, 7200), (ENGINE: 6081AF, 6081HF)
A-47445386
Drawbar
Dim/Info:
Length - 41.50"
Width - 2.50"
Thickness - 1.50"
For Models: Ford / New Holland (TRACTOR: TS6.110, TS6.120)
A-47445394
Drawbar
Dim/Info:
Length - 41.50"
Width - 3.00"
Thickness - 1.75"
For Models: Ford / New Holland (TRACTOR: TS6.125, TS6.140)
A-L158505
Brake Piston
Dim/Info:
ID - 9.529"
OD - 13.976"
Thickness - 1.380"
For Models: John Deere (TRACTOR: 5045E, 5055E, 5065E, 5075E, 5080R, 5083E, 5083EN, 5090R,
5093E, 5093EN, 5100R, 5101E, 5101EN, 5103, 5200 SN 620188>, 5203, 5204, 5210, 5220, 5225, 5300
SN 630345>, 5303, 5310, 5310N, 5320, 5320N, 5325, 5325N, 5400 SN 640542>, 5403, 5410, 5420,
5420N, 5425, 5425N, 5503, 5510, 5510N, 5520, 5520N, 5525, 5525N, 5603, 5625, 5725 SN 005048>,
(5620, 5720, 5820 ALL SN 411560>))
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
www.allpartsstore.com
November 2014 New Parts Release
A-87708433
Brake Seperator Plate
Dim/Info:
ID - 7.426"
Thickness - .196"
For Models: Case-IH (INDUSTRIAL/CONSTRUCTION: (580M, 580SM, 590SM ALL Series 3 Tier III), 580SM
PLUS SERIES 3 Tier III, 590SM Plus Series 3 Tier III)
A-87708435
Brake Seperator Plate
Dim/Info:
ID - 7.426"
Thickness - .312"
For Models: Case-IH (INDUSTRIAL/CONSTRUCTION: (580M, 580SM, 590SM ALL Series 3 Tier III), 580SM
PLUS SERIES 3 Tier III, 590SM Plus Series 3 Tier III)
A-T159474
Parking Brake Plate
Dim/Info:
ID - 4.312"
OD - 5.823"
Thickness - .156"
Tang Width - .984"
Number of Tangs - 8
For Models: John Deere (INDUSTRIAL/CONSTRUCTION: 210K, 210LE, 210LJ, 310E, 310G, 310J, 310K,
310K EP, 310SE, 310SG, 310SJ, 310SK, 315SE, 315SG, 315SJ, 315SK, 325J, 325K, 325SK, 410E, 410G,
410J, 410K, 410K TC, 435, 485E, 486E, 488E, 710D SN 872329>, 710G, 710J, 710K)
A-T159475
Parking Brake Plate
Dim/Info:
ID - Major: 4.182" Minor: 3.914"
OD - 5.785"
Thickness - .149"
Teeth - 34
For Models: John Deere (INDUSTRIAL/CONSTRUCTION: 210K, 210LE, 210LJ, 310E, 310G, 310J, 310K,
310K EP, 310SE, 310SG, 310SJ, 310SK, 315SE, 315SG, 315SJ, 315SK, 325J, 325K, 325SK, 410E, 410G,
410J, 410K, 410K TC, 435, 485E, 486E, 488E, 710D SN 872329>, 710G, 710J, 710K)
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
www.allpartsstore.com
November 2014 New Parts Release
A-R101158
B1 Planetary Brake Plate, PowrQuad Transmission
Dim/Info:
ID - 9.375"
OD - 11.210"
Thickness - .119"
Tang Width - 2.944"
Number of Tangs - 4
For Models: John Deere (TRACTOR: 6300, 6405, 6500, 6600, 6605, 7200, 7210, 7400, 7405, 7410,
7500, 7505, 7510, 7600, 7610, 7700, 7710, 7800, 7810)
A-R209938
B1 & B2 Planetary Brake Disc, PowrQuad Transmission
Dim/Info:
ID - 9.375"
OD - 11.870"
Thickness - .196"
Tang Width - 2.972"
Number of Tangs - 4
PKG QTY - 2
For Models: John Deere (TRACTOR: 1654, 1854, 5620, 5720, 5820, 6010, 6020, 6100, 6110, 6110J,
6110L, 6120, 6120L, 6125J, 6130, 6130J, 6140J, 6145J, 6155J, 6180J, 6200, 6200L, 6210, 6210L,
6215, 6220, 6220L, 6230, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6330, 6400, 6400L, 6410,
6410L, 6410S, 6415, 6420, 6420L, 6420S, 6430, 6500, 6500L, 6506, 6510, 6510L, 6510S, 6520, 6520L,
6530, 6534, 6600, 6610, 6615, 6620, 6630, 6715, 6800, 6810, 6820, 6830, 6900, 6910, 6910S, 6920,
6920S, 6930, 7130, 7185J, 7195J, 7200, 7205J, 7210, 7210J, 7220, 7230, 7320, 7330, 7400, 7405,
7410, 7420, 7505, 7510, 7515, 7520, 7600, 7610, 7630, 7700, 7710, 7720, 7730, 7800, 7810, 7815,
7820, 7830, 7930, SE6010, SE6020, SE6110, SE6120, SE6210, SE6220, SE6310, SE6320, SE6410,
SE6420, SE6510, SE6520, SE6610, SE6620, SE6920)
A-87708434
Brake Disc
Dim/Info:
ID - 1.705"
OD - 11.380"
Thickness - .264"
For Models: Case-IH (INDUSTRIAL/CONSTRUCTION: (580M, 580SM, 590SM ALL Series 3 Tier III), 580SM
PLUS SERIES 3 Tier III, 590SM Plus Series 3 Tier III)
A-AT179503
Service Brake Disc
Dim/Info:
ID - Major: 2.117" Minor: 1.706"
OD - 9.150"
Thickness - 0.224"
Teeth - 15
For Models: John Deere (INDUSTRIAL/CONSTRUCTION: 210LE, 310E, 310G, 310SE, 310SG, 315SE, 315SG,
410E, 410G, 485E, 486E, 488E)
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
www.allpartsstore.com
November 2014 New Parts Release
A-AT339059
Service Brake Disc
Dim/Info:
ID - Major: 5.910" Minor: 5.575"
OD - 9.150"
Thickness - 0.224"
Teeth - 48
For Models: John Deere (INDUSTRIAL/CONSTRUCTION: 210K, 210LJ, 310J, 310K, 310K EP, 310SJ, 310SK,
310SK TC, 315SJ, 315SK, 325J, 325SK, 410J, 410K, 410K TC)
A-AT339543
Service Brake Disc
Dim/Info:
ID - Major: 2.620" Minor: 2.332"
OD - 9.175"
Thickness - .218"
Teeth - 20
For Models: John Deere (INDUSTRIAL/CONSTRUCTION: 210K, 210LJ, 310J, 310K, 310K EP, 310SJ, 310SK,
310SK TC, 315SJ, 315SK, 325J, 325SK, 410J, 410K, 410K TC)
A-T159409
Service Brake Disc, 3MM
Dim/Info:
ID - 5.993"
OD - 9.585"
Thickness - .119"
Teeth - 81
For Models: John Deere (INDUSTRIAL/CONSTRUCTION: 180CW, 210CW, 210LE, 310E, 310G, 310SE,
310SG, 315SE, 315SG, 410E, 410G, 485E, 486E, 488E)
A-T161233
Service Brake Disc, 4MM
Dim/Info:
ID - 5.993"
OD - 9.585"
Thickness - .158"
Teeth - 81
For Models: John Deere (INDUSTRIAL/CONSTRUCTION: 210LE, 310E, 310G, 310SE, 310SG, 315SE, 315SG,
410E, 410G, 485E, 486E, 488E)
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
www.allpartsstore.com
November 2014 New Parts Release
A-T228727
Service Brake Plate
Dim/Info:
ID - 6.060"
OD - 9.255"
Thickness - .159"
Tang Width - 1.770"
Number of Tangs - 4
For Models: John Deere (INDUSTRIAL/CONSTRUCTION: 210K, 210LJ, 310J, 310K, 310K EP, 310SJ, 310SK,
310SK TC, 315SJ, 315SK, 325J, 325SK, 410J, 410K)
A-RE55066
Tie Rod Assembly
Assembly Consists Of: (1)RE54957 Tie Rod, (1)14M7209 Jam Nut, (1)RE45912 Ball Joint.
For Models: John Deere (TRACTOR: 5105 MFWD / SN <411494, (5200, 5300, 5400 ALL MFWD RH / Axle
SN 1466>), 5205 MFWD / SN <421397, 5210 MFWD, 5220 MFWD / Collar Shift Trans. SN <420010, 5220
MFWD / Powr Reverser Trans. SN <426020, 5220 MFWD / Sync Shuttle Trans. SN <422082, 5310 MFWD,
5320 MFWD / Collar Shift Trans. SN <430008, 5320 MFWD / Powr Reverser Trans. SN <436049, 5320
MFWD / Sync Shuttle Trans. SN <432109, 5410 MFWD, 5415 MFWD / SN <005885, 5420 MFWD / Collar
Shift Trans. SN <440014, 5420 MFWD / Powr Reverser Trans. SN <446069, 5420 MFWD / Sync Shuttle
Trans. SN <442180, 5500 MFWD RH, 5510 MFWD, 5520 MFWD / Collar Shift Trans. SN <450004, 5520
MFWD / Powr Reverser Trans. SN <456080, 5520 MFWD / Sync Shuttle Trans. SN <452091, 5615 MFWD /
SN <004119, 5715 MFWD / SN <001131)
A-VLD1844
Fender Bracket, LH
Used W/ VLD1802, VLD1803, VLD1810, VLD1811 & VLD1812 Front Fenders.
For Models: (Miscellaneous) ((Undefined): SEVERAL
A-VLD1845
Fender Bracket, RH
Used W/ VLD1802, VLD1803, VLD1810, VLD1811 & VLD1812 Front Fenders.
For Models: (Miscellaneous) ((Undefined): SEVERAL
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
www.allpartsstore.com
November 2014 New Parts Release
A-RE531436
Fuel Injector
For Models: John Deere (TRACTOR: 6120, 6120L, 6215, 6220, 6220L, 6320, 6320L, 6415, 6420,
6420L, 6520L, 6615, 6715, (7220, 7320, 7420, 7520 ALL W/ TURBOCHARGER), 6020, (6020, 6520,
6620, 6120, 6215, 6220, 6320, 6420 ALL Euro Edition), 6520, 6620, 7220, 7320, 7420, 7520, SE6020,
SE6120, SE6220, SE6320, SE6420), (INDUSTRIAL/CONSTRUCTION: 210LE PE4045TT092, W/ TURBOCHARGER, 410G PE4045TT093, W/ TURBOCHARGER, (310G, 310SG ALL VSN: 910056 >, PE4045TT088/
PE4045TT089; VSN: < 943548, TT089), 270CLC, 3215, 3220, 3415, 3420, 360DC, 360DG, 3800, 410G,
450J, 540GIII, 550J, 605C, 650J, 700H, 750J, 850J)
A-AL67975
Fuel Pre-Filter
Dim/Info:
PKG QTY - 5
For Models: John Deere (TRACTOR: 1350, 1550, 1750, 1750V, 1850, 1850V, 1950, 1950N, 2155, 2250,
2250F, 2355, 2355N, 2450, 2450F, 2555, 2650, 2650F, 2650N, 2755, 2850, 2855N, 2955, 3050, 3055,
3150, 3155, 3255, 3350, 3650), (INDUSTRIAL/CONSTRUCTION: 244J, 324H SN 700372>, 324J, 344H
SN 710372-719999 & SN 110000-119999, L512, L514, L524, L534)
A-CH11696
Ignition Switch w/ Keys
For Models: John Deere (TRACTOR: 1250, 1450, 1650), (COMPACT TRACTOR: 1050, 650, 750, 850,
900HC, 950)
A-RE13724
Power Beyond Hose Kit
For Models: John Deere (TRACTOR: 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440,
4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430 Model Year
1974-1981, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970)
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
www.allpartsstore.com
November 2014 New Parts Release
B1SB8316
Plastic Economy Blade Balancer
Specifically designed to fit 99% of all center holes.
B1SB285844
Spindle Assembly
For Models: Cub Cadet (LT1022, LT1045 (2007 & Before), LT1046))
B1BC1209
Bobcat Mower Blade, XHT
(3) blades for 61" cut.
Dim/Info:
Length - 21"
CH - 5/8"
Width - 2-1/2"
Thickness - 0.197"
For Models: Bobcat (XM series)
B1EM1887
Exmark Mower Blade, XHT
Dim/Info:
Length - 16-1/4"
CH - 15/16"
Width - 2-1/2"
Thickness - 0.197"
For Models: Exmark (Mowers)
B1EM1884
Exmark Mower Blade, XHT
Dim/Info:
Length - 18"
CH - 15/16"
Width - 2-1/2"
Thickness - 0.197"
For Models: Exmark (Mowers)
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
www.allpartsstore.com
November 2014 New Parts Release
B1EM1886
Exmark Mower Blade, XHT
Dim/Info:
Length - 18"
CH - 15/16"
Width - 2-1/2"
Thickness - 0.197"
For Models: Exmark (Mowers)
B1EM1885
Exmark Mower Blade, XHT
Dim/Info:
Length - 20-1/2"
CH - 15/16"
Width - 2-1/2"
Thickness - 0.197"
For Models: Exmark (Mowers)
B1EM1888
Exmark Mower Blade, XHT
(3) blades for 60" cut.
Dim/Info:
Length - 20-1/2"
CH - 15/16"
Width - 2-1/2"
Thickness - 0.197"
For Models: Exmark (Mowers)
B1HS1012
Hustler Mower Blade, XHT
(3) blades for 60" cut.
Dim/Info:
Length - 20-1/2"
CH - 5/8"
Width - 3"
Thickness - 0.197"
For Models: Hustler (Mowers)
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
www.allpartsstore.com
November 2014 New Parts Release
B1HS1013
Hustler Mower Blade, XHT
Dim/Info:
Length - 24-1/2"
CH - 5/8"
Width - 3"
Thickness - 0.197"
For Models: Hustler (Mowers)
B1HV2204
Husqvarna Mower Blade, XHT
(3) blades for 54" cut.
Dim/Info:
Length - 19"
CH - 5/8"
Width - 2-1/2"
Thickness - 0.250"
For Models: Husqvarna (Mowers)
B1PD5011
Kubota Mower Blade, Predator 2
Dim/Info:
Length - 18-5/8"
CH - 57/64"
Width - 2-1/2"
Thickness - 0.250"
For Models: Kubota (Mowers)
B1JD1053
John Deere Mower Blade, XHT
Dim/Info:
Length - 21"
CH - 3/8"
Width - 2-1/2"
Thickness - 0.134"
For Models: John Deere (Mowers)
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
www.allpartsstore.com
November 2014 New Parts Release
B1JD1054
John Deere Mower Blade, XHT
Dim/Info:
Length - 21"
CH - 29/32"
Width - 2-3/4"
Thickness - 0.197"
For Models: John Deere (Mowers)
B1TR3116
Toro Mower Blade, XHT
(3) blades for 50" cut.
Dim/Info:
Length - 17-1/2"
CH - 5/8"
Width - 2-1/4"
Thickness - 0.165"
For Models: Toro (Mowers)
B1PD5015
Toro Mower Blade, Predator 2
Dim/Info:
Length - 17-1/2"
CH - 5/8"
Width - 2-1/2"
Thickness - 0.197"
For Models: Toro (Mowers)
B1W983207
Metering Lever Spring
Holds the metering lever height.
For Models: Walbro (Fits a range of carburetors)
B1WWYK406
Complete Carburetor
For Models: Yamabiko (PB-770)
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
www.allpartsstore.com
November 2014 New Parts Release
B1ALR00012
Tygothane® LP 1200 Fuel Line
LP 1200 is designed for small engine fuel transfer applications, especially for handheld lawn and
garden tools such as chainsaws, brush cutters, trimmers and blowers. It can also be used as fuel
transfer hoses for lawn mowers, snow blowers, and other ground supported equipment. LP 1200 is
highly chemical resistant and compatible with higher ethanol blend fuel. The patent pending design
offers a superior tubing product that resolves those issues and provides longer life. Clear.
Dim/Info:
ID - 3/16"
OD - 5/16"
Length - 50'
B1ALR00017
Tygothane® LP 1200 Fuel Line
LP 1200 is designed for small engine fuel transfer applications, especially for handheld lawn and
garden tools such as chainsaws, brush cutters, trimmers and blowers. It can also be used as fuel
transfer hoses for lawn mowers, snow blowers, and other ground supported equipment. LP 1200 is
highly chemical resistant and compatible with higher ethanol blend fuel. The patent pending design
offers a superior tubing product that resolves those issues and provides longer life. Clear.
Dim/Info:
ID - 1/4"
OD - 3/8"
Length - 50'
B1ALR00165
Tygothane® LP 1200 Fuel Line
LP 1200 is designed for small engine fuel transfer applications, especially for handheld lawn and
garden tools such as chainsaws, brush cutters, trimmers and blowers. It can also be used as fuel
transfer hoses for lawn mowers, snow blowers, and other ground supported equipment. LP 1200 is
highly chemical resistant and compatible with higher ethanol blend fuel. The patent pending design
offers a superior tubing product that resolves those issues and provides longer life. Clear.
Dim/Info:
ID - 3/32"
OD - 3/16"
Length - 50'
B1ALR00700
Tygothane® LP 1200 Fuel Line
LP 1200 is designed for small engine fuel transfer applications, especially for handheld lawn and
garden tools such as chainsaws, brush cutters, trimmers and blowers. It can also be used as fuel
transfer hoses for lawn mowers, snow blowers, and other ground supported equipment. LP 1200 is
highly chemical resistant and compatible with higher ethanol blend fuel. The patent pending design
offers a superior tubing product that resolves those issues and provides longer life. Clear.
Dim/Info:
ID - .080"
OD - .140"
Length - 50'
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
www.allpartsstore.com
November 2014 New Parts Release
B1AF338
Air Filter
Dim/Info:
Size - 5-7/8" L x 2-3/8" H x 2" OD
For Models: Kawasaki (FR541V-FR600V)
B1PF250
Prefilter
Use with A-B1AF250
Dim/Info:
Size - 4-15/16" L x 3-3/16" W x 1-3/8" H
For Models: STIHL (Several)
B1PH4
Fred Marvin Pruner Head
Dim/Info:
Cut - 1-1/4"
B1SUT10
Hi-Run Sutong Tire
Wide shoulders to reduce damage to turf and lawn. Closed shape tread provides greater traction.
Mirrors popular turf style tread patterns.
Dim/Info:
Tread Style - Turf
Dimensions - 11 x 4 x 5
Ply - 2
For Models: Several (Turf, Lawn and Garden)
B1SUT32
Hi-Run Sutong Tire
Wide shoulders to reduce damage to turf and lawn. Closed shape tread provides greater traction.
Mirrors popular turf style tread patterns.
Dim/Info:
Tread Style - Turf
Dimensions - 13 x 6.5 x 6
Ply - 2
For Models: Several (Turf, Lawn and Garden)
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
www.allpartsstore.com
November 2014 New Parts Release
B1SUT66
Hi-Run Sutong Tire
Wide shoulders to reduce damage to turf and lawn. Closed shape tread provides greater traction.
Mirrors popular turf style tread patterns.
Dim/Info:
Tread Style - Turf
Dimensions - 16 x 6.5 x 8
Ply - 4
For Models: Several (Turf, Lawn and Garden)
B1SUT122
Hi-Run Sutong Tire
Wide shoulders to reduce damage to turf and lawn. Closed shape tread provides greater traction.
Mirrors popular turf style tread patterns.
Dim/Info:
Tread Style - Turf
Dimensions - 20 X 8 x 8
Ply - 2
For Models: Several (Turf, Lawn and Garden)
B1SUT405
Hi-Run Sutong Tire
Wide shoulders to reduce damage to turf and lawn. Closed shape tread provides greater traction.
Mirrors popular turf style tread patterns.
Dim/Info:
Tread Style - Turf
Dimensions - 20 X 10 x 8
Ply - 4
For Models: Several (Turf, Lawn and Garden)
B1SUT7202
Hi-Run Sutong Tire
Wide shoulders to reduce damage to turf and lawn. Closed shape tread provides greater traction.
Mirrors popular turf style tread patterns.
Dim/Info:
Tread Style - Turf
Dimensions - 20 X 10 x 8
Ply - 2
For Models: Several (Turf, Lawn and Garden)
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
www.allpartsstore.com
November 2014 New Parts Release
B1SUT5
Hi-Run Sutong Tire
Consistent contact with various surfaces for easy-flowing traction. Round Shoulder construction
enables sharp corners while maintaining a smooth roll.
Dim/Info:
Tread Style - Smooth
Dimensions - 9 x 3.5 x 4
Ply - 4
For Models: Several (Turf, Lawn and Garden)
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
www.allpartsstore.com