User Manual VS-H60 Marshall Electronics Weather Proof Housing for IP Cameras

Marshall Electronics
Broadcast A/V Division
VS-H60 Series
Weather Proof Housing for IP Cameras
User Manual
V.1.0
VS-H60 Specifications
VS-H60 Safety Instructions / Installation
Drawings
Technical Drawings
Important safety instructions
1. Safety check - Safety checks should be performed upon completion of service or
repairs to the unit to ensure proper operating condition.
* Camera Not Included
* Shown with optional Wiper
VS-H60 Series Configuration Options
• VS-H60
• VS-H60-S
• VS-H60-SH
• VS-H60-SHB
• VS-H60-SHBD
• VS-H60-SHBDW
• VS-H60-HSBDWP
Basic Housing
With Sunshield
With Sunshield and Heater
With Sunshield Heater and Blower
With Sunshield Heater, Blower and Defroster
With Sunshield Heater, Blower, Defroster and Wiper
With Sunshield Heater, Blower, Defroster, Wiper and PoE+
Available Options:
• S - Sunshield
• H - Heater
• B - Blower
• D - Defroster
• W - Wiper
• P - PoE+
VS-H60 Series Specs
Using Condition
Input Power
Power Consumption
Weather Resistant
Thermostat
Indoor / Outdoor
AC24V
VS-H60-SHB
24VAC:22W
VS-H60-SHBD
24VAC:30W
VS-H60-SHBDW
24VAC:35W
VS-H60/VS-H60-S
Temperature: -15°~+50° / Humidity: 100%
VS-H60-SHB
Temperature: -35°~+55° / Humidity: 100%
VS-H60-SHBD
Temperature: -40°~+55° / Humidity: 100%
Heater: ON 4°C±3°C
Blower: ON 45°C±5°C
External Size
Dimension
Weight
Material
IP grade
Accessory
2
2. Important
Installation
- Install
in accordance with the manufacturer's instructions and in
safety
instructions
Important
safety
instructions
accordance
with
applicable
codes.
1. Safety check - Safety checkslocal
should
be performed upon completion of service or repairs to the
1. Safety check - Safety checks should be performed upon completion of service or
unit to ensure proper
operating
3. Attachments,
changes
or condition.
modifications - Only use attachments/accessories specified
repairs to the unit to ensure proper operating condition.
by Installation
the manufacturer.
Any changewith
or the
modification
of the
equipment,
expressly
--Install
manufacturer’s
instructions
and and
innot
accordance
with
2.2. Installation
Installininaccordance
accordance with
the
manufacturer's
instructions
in
applicable local
codes. could void the warranty or, in the case of an authorization
approved
by KEVIS,
accordance with applicable local codes.
agreement,
authority
to or
operate
the equipment.
3. Attachments,
Attachments,
changes
cations
- Only
useuse
attachments/accessories
specifi
ed by the
3.
changes
ormodifi
modifications
- Only
attachments/accessories
specified
manufacturer.
Any changeAny
or modifi
cation
of the equipment,
expressly not
approved
by Marshall,
by the manufacturer.
change
or modification
of thenot
equipment,
expressly
could void the warranty or, in the case of an authorization agreement, authority to operate the
Camera
Installation
approved
by KEVIS, could void the warranty or, in the case of an authorization
equipment.
agreement,
authorityopen
to operate
the equipment.
 Use
5MM wrench,
the housing
top part.
Camera Installation
 Remove the camera plate, Install the camera on the camera plate and screw up.
Camera
· Use 5MM Installation
wrench, open the housing top part
 Check the lens and focus.
· Remove
the camera
plate,
the camera
the camera plate and screw up

Use 5MM
wrench,
openInstall
the housing
topon
part.
 · Close
the
housing
top
part
and
screw
up
tightly.
Check the lens and focus
 Remove the camera plate, Install the camera on the camera plate and screw up.
· Close the housing top part and screw up tightly
 Check the lens and focus.
 Close the housing top part and screw up tightly.
Internal Size
VS-H60
173(W)x116(H)x428(D)m/m
132(W)x78.4(H)x383.8(D) m/m
VS-H60-S
184.6(W)x127.3(H)x460(D)m/m
132(W)x78.4(H)x383.8(D) m/m
VS-H60-SHB
184.6(W)x127.3(H)x460(D) m/m
132(W)x78.4(H)x294(D) m/m
VS-H60-SHBD
VS-H60-SHBDW
VS-H60: 2.3kg, VS-H60-S: 3kg, VS-6H0-SHB / VS-H60-SHBDW: 3.6kg
Aluminum, Glass, Plastic
IP66
1/4-20UNC Screws (3ea). Spring Washer (1ea). Flat Washer (1ea)
3
VS-H60 Installation
Wall Mount Bracket Installation
Wall Mount Bracket Installation
CAUTION: If you don’t
need to use fittings,
please tight up to
prevent
the water
NPT1/2 Fitting:
ingress.
Cable φ6~φ10MM
VS-H60 Safety Installation
Wire
Connection
Wire
Connection
Terminal block
3
3
4
4
5
5
INPUT
LOWHEATER
2
LOW-HEATER
2
P1
P2
1
AC230V
Marshall Mounting Bracket - VS-H60 BRK
DEF-HEATER
Supplied Bracket
Marshall Mounting Bracket
VS-H60 BRK (Included)
4
G
1
BLOWER
INPUT
H
N
AC24V
Top part of the bracket can
be rotated 180º horizontally
(Front, Left-to-Right),
and 90º Vertically down
N
WIPER
CONTROL
CAMERA
POWER
Marshall Mounting Bracket - VS-H60 BRK
H
Please connect the Wiper Control Terminals 1 & 2
with wire to the Main Power Board as shown
G
BLOWER
Power input
NPT3/8 Fitting:Cable
φ4.5~φ7.5MM
FUSE
CAUTION: If you don’t
NPT3/8
Fitting:Cable
need
to use
fittings,
please tight up to
φ4.5~φ7.5MM
prevent the water
ingress.
AC24V
WIPER
CONTROL
DEFHEATER
AC24V
5
Warranty
Marshall Electronics warranties to the first consumer that this VS-H60, weather-proof housing
will, under normal use, be free from defects in workmanship and materials, when received in its
original container, for a period of one year from the purchase date. This warranty is extended to
the first consumer only, and proof of purchase is necessary to honor the warranty. If there is no
proof of purchase provided with a warranty claim, Marshall Electronics reserves the right not to
honor the warranty set forth above. Therefore, labor and parts may be charged to the consumer.
This warranty does not apply to the product exterior or cosmetics. Misuse, abnormal handling,
alterations or modifications in design or construction void this warranty.
No sales personnel of the seller or any other person is authorized to make any warranties other
than those described above, or to extend the duration of any warranties on behalf of Marshall
Electronics, beyond the time period described above.
Due to constant effort to improve products and product features, specifications may change
without notice.
Marshall Electronics, Inc.
1910 East Maple Ave. El Segundo, CA 90245
Tel: (800) 800-6608 / (310) 333-0606 • Fax: 310-333-0688
www.Marshall-usa.com • [email protected]