Glow Bright LASER LIGHT

Glow Bright
STILL
LASER
LIGHTS
LASER LIGHT
Transform the Look of Your Home Easily... in Seconds Year-Round!
Auto Sensor
Turns on Turns off in
at Night daylight
USER GUIDE
CONTENTS:
Weather
Resistant
Housing
5V DC
Power Supply
Extra Long
Lawn Stake
(Just Put it In!)
Beams Cover
Over 55.741 Sq. Mtrs.
INSTRUCTIONS:
1. Determine proper placement of Glow Bright Laser Light to ensure that there are no obstructions between the unit and
the surface that you wish to illuminate.
2. Insert the lawn stake in desired location, making sure the bottom part of the stake is sufficiently underground. (If need
be, use a rubber mallet to help tap the stake into the ground.
3. Carefully align the bottom of the Glow Bright Laser Light housing with the opening at the top of the lawn stake. Firmly
insert the Laser unit base into the lawn stake.
4. Adjust the projection angle of the laser by adjusting the screw on the side of the laser housing. Once proper alignment is
achieved, tighten the screw. (Do not over tighten.)
5. Attach an outdoor extension cord (not included) to the power supply plug on the Glow Bright Laser Light. Plug the
extension cord into a 220 - 240 V outlet.
WARNING- Do not look into Laser Light. Do not aim at aircraft.
6. Turn the Glow Bright Laser Light on by pressing the red button on the back of the laser housing. When using the red
button on the back of unit, continue to press and toggle through color and flashing options.
(Fixed - RED, Green, Red & Green and Flashing Red & Green)
4 mode options to
choose from!
Mode 1: RED & GREEN fix
Mode 2: RED & GREEN flashing
Mode 3: GREEN Colour fix
Mode 4: RED colour fix
LASER CLASSIFICATION : Class 2
Laser Maximum Power Output : Less than 1mW
Laser Wavelengths : 532,650nm
Power Input : 220-240V~AC
Power Consumption : 5W
Operation : Indoor / Outdoor - IP44
Operation Temperatures : -4°F to 95°F ( -20°C to 35°C )
Projection Coverage : Over 55.741 Sq. Mtrs.
Complies with EN 60825 Class 2 Laser Product
This marking indicates that this product should not be disposed with other household wastes throughout the
EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recyle it
responsibly to promote the sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was purchased. They can take this
product for environmental safe recycling.
Please Read Carefully Before Operating
CAUTION CLASS 2 LASER
RADIATION WHEN
OPEN. DO NOT
STARE INTO BEAM.
DO NOT
AIM AIRCRAFT.
DIODE LASER
1mW
m MAX OUTPUT at 532-650nm
CLASS II LASER PRODUCT
Glow Bright
STILL
LASER
LIGHTS
LASER LIGHT
Transform the Look of Your Home Easily... in Seconds Year-Round!
Auto Sensor
Turns on Turns off in
at Night daylight
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
Model : 02028
Input : 220-240 V 0.3A Output: 5VDC, 1A
IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be practiced including the following:
1. Read and follow all safety instructions.
2. Read and follow all instructions that are on the product or provided with the product.
3. Reference the National Electric Code, ANSI/NFPA 70, specifically for the installations of wiring and clearances from power and lighting conductors.
4. Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated
construction.
5. For a direct plug-in power unit, do not install or use within 3.048 meters of a pool.
6. For a direct plug-in unit, do not use in a bathroom.
CAUTION: RISK OF ELECTRIC SHOCK, Do not use with extension cord near water or where water may accumulate. Keep lamp at least 4.876 meters from
pools and spas. Keep plugs and receptacles dry.
7.
WARNING: Risk of Electric Shock. When used outdoors, install only to a covered class A GFCI protected receptacle. If one is not provided, contact a
qualified electrician for proper installation. Ensure that the power unit and cord do not interfere with completely closing the receptacle cover.
8. Only use with an extension cord rated for outdoor use.
9.
WARNING: Risk of Fire. Installation involves special wiring methods to run wiring through a buildings structure. Consult a qualified electrician.
10.
WARNING: Do not use with receptacles that are weatherproof only when the receptacle is covered (attachment plug cap not inserted and receptacle cover closed).
11. This unit is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised
to ensure that they do not play with the unit. Keep children away from direct beam.
WARNING: Keep remote control away from children, the remote contains a button cell battery that can cause serious injury or death if swallowed.
12. Don’t operate unit with damaged plug.
13. Don’t disassemble charger. Disassembly may result in a risk of electric shock or fire.
14. Do not attempt to open the housing of Glow Bright Laser Light under any circumstance.
15. To reduce the risk of electric shock, unplug the charger from the outlet when not in use.
16. Don’t operate unit if it has been subjected to damage in any way.
LASER SAFETY WARNING:
Potential laser injury hazard exists with this product! Read these instructions which includes below warnings and instructions to use and assembly!
1. CAUTION Avoid direct eye contact with laser light. Never intentionally expose your eyes or others to direct laser light.
2. CAUTION This laser product can potentially cause instant eye injury or blindness if laser light directly strikes the eyes.
3. CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
4. CAUTION - Laser radiation. Do not stare into beam.
5. CAUTION - The use of optical instruments with this product will increase eye hazard.
6. Do not attempt to repair or disassemble the laser. If unqualified persons attempt to repair this laser product, serious injury may result. Any repair required on
this product should be performed by authorized service centre personnel.
Important!
Laser Lights ONLY WORKS IN THE DARK!
To save electricity, Laser Light has been designed to only turn
on in the dark.
TEST THE UNIT IN A DARK ROOM.
SAVE THESE INSTRUCTIONS This manual contains important safety and operating instructions for power units.
How far out does Glow Bright Laser Light need to be
from your house in order to cover how much of an area?
3 metres
- 19 sq. metres
6 metres
- 76.5 sq. metres
7.5 metres
- 119.5 sq. metres
9 metres
- 172 sq. metres
10.5 metres
- 234.5 sq. metres
12 metres
- 306 sq. metres
Article no.: 775100040101
Made in China
GBLL220_FX_MANUAL_ENG_130616_V2
Please Read Carefully Before Operating
Glow Bright
STILL
LASER
LIGHTS
LASER LIGHT
Transform the Look of Your Home Easily... in Seconds Year-Round!
Auto Sensor
Turns on Turns off in
at Night daylight
BRUKSANVISNING
ING S
SVENSKA
VENSKA
INNEHÅLL:
1 x Laser
1 x Transformator med sladd
1 x Markfäste
ANVISNINGAR:
Läs igenom anvisningarna noggrant innan du börjar använda produkten
1.
2.
3.
4.
Placera laserbelysningen på ett sådant sätt att det inte finns några hinder mellan enheten och den yta som du vill belysa.
Stick ned markpinnen på önskad plats, se till att den kommer tillräckligt långt ned.
Fäst lasern på markpinnen. Se till att den sitter ordentligt fast på pinnen.
Justera projektionsvinkeln med hjälp av justeringsskruvarna på sidorna av laserenheten. När du är nöjd drar du åt
skruvarna (dra inte åt för hårt).
5. Anslut sladden och koppla in laserbelysningen i eluttaget.
6. Slå på laserbelysningen genom att trycka på den röda knappen på baksidan av enheten.
Klicka på knappen för att växla mellan de 4 olika alternativen.
Läge 1: Röd & Grön fast
Läge 2: Röd & Grön och blinkande
Läge 3: Grön fast
Läge 4: Röd fast
Laserbelysningen FUNGERAR ENDAST I MÖRKER!
För att spara el har laserbelysningen utformats med en ljussensor.
Ljussensorn slår automatiskt av lasern i dagsljus och slår automatisk på
den igen vid mörker.
Läge 5: Off
SÄKERHETSFÖRESKRIFTER:
VARNING! Undvik direkt ögonkontakt, titta aldrig rakt in i lasern!
VARNING! Rikta aldrig din laser mot andra människor, fordon, trafikerade vägar eller rakt ut i luften. Tänk på att lasern kan uppfattas som
störande av grannar och omgivning om lasern inte används på rätt sätt.
-För inom och utomhusbruk
-Vid en temperatur under noll grader kan det dröja några minuter innan lasern nått sin fulla ljusstyrka.
-Anslut ej belysningen till elnätet då den befinner sig i förpackningen.
-Anslutningssladden till denna belysning är ej utbytbar. Om anslutningssladden skadas skall belysningen kasseras.
-Anslut endast belysningen till medföljande transformator
DISASSEMBLY OF THIS DEVICE MAY BE
UNLAWFUL AND CAN CAUSE EXPOSURE
TO LASER RADIATION
-Anslut ej belysningen elektriskt till annan belysning.
Varning! Om föreskriften inte efterföljs kan en olycka leda till allvarlig person- eller egendomsskada.
TEKNISK DATA
Uppfyller EN 60825 för laserprodukter i klass 2
Laser: Class 2
Drifttemperatur: -20°C - +35 °C
Användning: Inomhus/Utomhus
IP44
Transformator:
Input: 220-240V AC
Output: 5 V DC, 1 A
Power: 5W
Täckyta: Avstånd 6-7m ger en täckyta på ca 7x7m
CAUTIONCLASS 2 LASER
RADIATION
WHEN OPEN.
DO NOT
STARE
INTO BEAM.
DIODE LASER
1mW MAX OUTPUT at 532-650nm
CLASS II LASER PRODUCT
SE - Viktigt! Undvik direkt ögonkontakt!
NO - Viktig! Unngå direkte øyekontakt!
LASER RADIATION
Artikel nr: 775100040101
Tillverkad i Kina
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
SE - Viktigt! Undvik direkt ögonkontakt!
NO - Viktig! Unngå direkte øyekontakt!
Auto Sensor
Glow Bright
STILL
LASER
LIGHTS
LASER LIGHT
Transform the Look of Your Home Easily... in Seconds Year-Round!
Turns on Turns off in
at Night daylight
BRUKSANVISNING
ING N
NORSK
ORSK
INNHOLD:
1 x Laser
1 x Transformator med ledning
1 x Bakkefeste
INSTRUKSJONER:
Les nøye gjennom instruksjonene før du begynner å bruke produktet
1. Plasser laserbelysningen på en slik måte at det ikke finnes noe hinder mellom enheten og den overflaten du vil belyse.
2. Stikk bakkepinnen ned på ønsket sted, sørg for at den kommer tilstrekkelig langt ned.
3. Fest laseren på bakkepinnen. Sørg for at den sitter ordentlig fast på pinnen.
4. Juster projeksjonsvinkelen ved hjelp av justeringsskruene på sidene av laserenheten. Når du er fornøyd drar du til skruene
(ikke stram dem for hardt).
5. Sett i ledningen og koble laserbelysningen til strømuttaket.
6. Slå på laserbelysningen ved å trykke på den røde knappen på baksiden av enheten.
Klikk på knappen for å veksle mellom de 4 ulike alternativene.
Posisjon 1: Rød og Grønn fast
Posisjon 2: Rød og Grønn og blinkende
Posisjon 3: Grønn fast
Posisjon 4: Rød fast
Laserbelysningen FUNGERER BARE I MØRKET!
For å spare strøm har laserbelysningen en lyssensor.
Lyssensoren slår automatisk av laseren i dagslys og slår den automatisk
på igjen når det blir mørkt.
Posisjon 5: Off
SIKKERHETSFORSKRIFTER:
ADVARSEL! - Unngå direkte øyekontakt, se aldri rett inn i laseren!
ADVARSEL! - Rett aldri laseren mot andre mennesker, kjøretøy, trafikkerte veier eller rett ut i luften. Husk at laseren kan oppfattes som
forstyrrende av naboer og omgivelser hvis den ikke brukes på riktig måte.
- For innendørs- og utendørsbruk.
- Når temperaturen er under null grader kan det ta noen minutter før laseren oppnår full lysstyrke.
- Ikke koble belysningen til strømnettet når den ligger i emballasjen.
- Koblingsledningen til denne belysningen kan ikke byttes ut. - Hvis koblingsledningen skades, skal belysningen kasseres.
- Koble bare belysningen til medfølgende transformator
- Ikke koble til belysningen elektrisk til annen belysning.
Advarsel! Dersom forskriftene ikke følges, kan en ulykke lede til alvorlig personskade eller skade på eiendom.
TEKNISKE DATA
Oppfyller EN 60825 for laserprodukter i klasse 2
Laser: Class 2
Driftstemperatur: -20 °C - +35 °C
Bruksområde: Innendørs/utendørs
IP44
Transformator:
Input: 220-240 V
Artikkel nr.: 775100040101
Output: 5 V DC, 1 A
Laget i Kina
Power: 5W
Dekningsoverflate: Avstand 6-7 m gir en dekningsoverfalte på ca. 7x7 m
DISASSEMBLY OF THIS DEVICE MAY BE
UNLAWFUL AND CAN CAUSE EXPOSURE
TO LASER RADIATION
CAUTIONCLASS 2 LASER
RADIATION
WHEN OPEN.
DO NOT
STARE
INTO BEAM.
DIODE LASER
1mW MAX OUTPUT at 532-650nm
CLASS II LASER PRODUCT
SE - Viktigt! Undvik direkt ögonkontakt!
NO - Viktig! Unngå direkte øyekontakt!
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
SE - Viktigt! Undvik direkt ögonkontakt!
NO - Viktig! Unngå direkte øyekontakt!