1. business and industrial
2. manufacturing

HASTELLOY X, ALLOY X, WNR 2.4665, UNS N06002
Introduction :
Aesteiron continues to expand its product line in UNS N06002 to meet the emerging customer needs, and whereas Aesteiron Steels Pvt. Ltd. is ISO 9001 : 2008
Certified, ASPL has a great Projects in this grade in all parts of the world with renowned suppliers presenting the wide range of services. We pride ourselves
in the quality of our products, our competitive pricing and our exceptional customer service. We have been recognized for our outstanding customer service
in satisfaction surveys of top- ranked mills in india and all over the world. ASPL, with iron and steel as its main business, manufactures premium steel products
with high technologies and a high added value and fosters three major product categories, namely carbon steel, stainless steel and special steel. Through our
worldwide marketing network,these premium proudcts not only satisfy the demand on the domestic market but are also exported to more than forty countries
and regions in Asia, Africa, Europaand America, extensively applied to various. We are a highly qualified by our customers worldwide as a sustainable and
trustwothy to meet their requestand need at the right time and the right time and the right area. We strive and stand commited to maintain this respectable position
by catering to the requirements of our customers in the best possible way leaving no room for complaints.
Products Available
in forms :
• HASTELLOY X, ALLOY X, WNR 2.4665, UNS N06002
• HASTELLOY X, ALLOY X, WNR 2.4665, UNS N06002
• HASTELLOY X, ALLOY X, WNR 2.4665, UNS N06002
• HASTELLOY X, ALLOY X, WNR 2.4665, UNS N06002
• HASTELLOY X, ALLOY X, WNR 2.4665, UNS N06002
• HASTELLOY X, ALLOY X, WNR 2.4665, UNS N06002
• HASTELLOY X, ALLOY X, WNR 2.4665, UNS N06002
Chemical Composition
Plates
Pipes
Round Bar
Tube
Flanges
Wire
Fittings
Carbon
Manganese
Phosphorus
Sulfur
Silicon
Chromium
Molybdenum
Cobalt
Tungsten
Aluminum
Titanium
Boron
Copper
Iron
Nickel
HASTELLOY X
ALLOY X
WNR 2.4665
0.05-0.15
1.00 max
0.04 max
0.03 max
1.00 max
20.5-23.0
8.0-10.0
0.5-2.5
0.2-1.0
0.50max
0.15max
0.01max
0.50max
17.0-20.0
Rem
0.05-0.15
1.00 max
0.04 max
0.03 max
1.00 max
20.5-23.0
8.0-10.0
0.5-2.5
0.2-1.0
0.50max
0.15max
0.01max
0.50max
17.0-20.0
Rem
0.05-0.15
1.00 max
0.04 max
0.03 max
1.00 max
20.5-23.0
8.0-10.0
0.5-2.5
0.2-1.0
0.50max
0.15max
0.01max
0.50max
17.0-20.0
Rem
HASTELLOY X
ALLOY X
WNR 2.4665
Standard Available
in forms :
Mechanical Properties
• ASTM B435 / ASME SB435
• ASTM B366 / ASME SB366
• ASTM B572 / ASME SB572
• ASTM B619 / ASME SB619
• ASTM B626 / ASME SB626
• ASTM B751 / ASME SB751
• ASTM B775 / ASME SB775
• ASTM B829 / ASME SB829
• ASTM B622 / ASME SB622
• AMS 5536
• AMS 5587
• AMS 5588
• AMS 5754
• AMS 5798
Ultimate Tensile Strength, ksi(Mpa)
0.2% Yield Strength, ksi(Mpa)
Elongation, min
95(655)
35(240)
35.00%
95(655)
35(240)
35.00%
95(655)
35(240)
35.00%
SPECIFICATIONS
ASTM
ASME
AMS
B435
B366
B572
B619
B622
B626
B751
B775
B829
-
SB435
SB366
SB572
SB619
SB622
SB626
SB751
SB775
SB829
-
5536
5588
5587
5754
5798
Plate, Sheet and Strip
Fittings
Rod
Welded Pipe
Seamless Pipe and Tube
Welded Tube
Tube
Pipe
Pipe and Tube
Bar, Forgings and Rings
Wire
UNS
N06002
0.05-0.15
1.00 max
0.04 max
0.03 max
1.00 max
20.5-23.0
8.0-10.0
0.5-2.5
0.2-1.0
0.50max
0.15max
0.01max
0.50max
17.0-20.0
Rem
UNS
N06002
95(655)
35(240)
35.00%
Corrosion Resistance
• INCONEL alloy HX has outstanding oxidation resistance at temperatures up to 2200°F (1200°C).
Fabrication
Heat Treatment
• The recommended heat treatment is 2150°F (1175°C), followed by rapid air cooling or water quenching.
• INCONEL alloy HX is normally supplied in this solution- heat-treated condition.
Hot and Cold Forming
• INCONEL alloy HX can be readily cold formed using slightly higher power than that used for austenitic stainless steels.
• It is best cold formed in the solution-heat-treated condition.
• For hot forming, the alloy should be heated to a starting temperature of 2150°F (1175°C).
• It should not be hot worked below 1800°F (980°C).
"Aesteiron House", 107, Kika Street, 4th Floor, Gulalwadi, Mumbai - 400 004, India.
[email protected]
www.aesteiron.com
© 2016-17. The content on this website is owned by Registrant of domain www.aesteiron.com , Do not
copy any content (including images) without prior written consent. Manufacturer, Stockholder,
Suppliers, Traders, Wholesaler, Dealer, Distributor, Importer, Exporter, Stockiest of Alloy Steel Pipe
Tubes, Stainless Steel Pipe Tube & Carbon Steel Pipe Tube
Welding
• The alloy can be welded by metal arc, gas-tungsten-arc (T.I.G.), gas-metal-arc (M.I.G.) and submerged arc processes.
• Welded surfaces must be thoroughly descaled and cleaned.
• Welding is best carried out flat since the fluidity of the alloy makes position welding difficult.
• Pre-heating and post-weld heat treatments are not normally necessary.
• For the greatest corrosion resistance, however, solution-heat-treatment after welding may be necessary.
Machining
• INCONEL alloy HX should be machined in the annealed condition using carbide or high-speed steel tools and a copious supply of sulfur-free cutting fluid.
• Tools and machines should be as rigid as possible to minimize deflection and vibration.
"Aesteiron House", 107, Kika Street, 4th Floor, Gulalwadi, Mumbai - 400 004, India.
[email protected]
© 2016-17. The content on this website is owned by Registrant of domain www.aesteiron.com , Do not
copy any content (including images) without prior written consent. Manufacturer, Stockholder,
Suppliers, Traders, Wholesaler, Dealer, Distributor, Importer, Exporter, Stockiest of Alloy Steel Pipe
Tubes, Stainless Steel Pipe Tube & Carbon Steel Pipe Tube
www.aesteiron.com