Download Report

Circo Kids
3 Drawer Dresser
DPCI # 249 - 20 - 0201 (White)
DPCI # 249 - 20 - 0211 (Chocolate)
>> assembly instructions
92345 F
1
FREE!
Do not go back to your store!
wE will hElp you!
Missing or Damage parts? have Questions about Assembly?
The store where you made this purchase does not stock parts for this item.
If you needs parts (damage or missing) or have questions about assembly. Please
call our toll fre support line or email us. All orders normally ship within 24 hours.
All Parts and Shipping are FREE!
Toll Free Customer Support
Monday – Friday from 8 am to 5 pm EST.
E-mail:[email protected]
Order parts anytime or download assembly
instructions through our website at www.tvilum.com
GRA
Ne retour
NouS V
pièces endommagées
Le magasin où vous ave
séparées de ce produit
manquantes) ou pour to
numéro sans frais ou no
sont habituellement exp
sont GRATuiTE!
Service à la clientèle g
Du lundi au vendredi d
Courriel : support@d-s
Commandez des pièces
les instructions d’assem
2
Congratulations on your latest Target purchase
Don't start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you'll be on your way to transforming your
room in no time. Good luck - though we're confident you won't need it.
before you begin
1.
Check for damaged or missing parts. Please call 1-855-MYTGTHOME (855-698-4846) for parts and service. Please reference DPCI#
249 - 20 - 0201 (White)
249 - 20 - 0211 (Chocolate)
2.
3.
4.
Use the carton as a worksurface to prevent product damage during assembly.
Sort hardware.
Gather all tools prior to assembly.
tools needed
3
table of contents
customer service information
2
introduction
3
parts list
5
hardware
how to use the cam lock system
assembly
QUESTIONS?
6-7
8
9 - 30
specification sheet
31
questionnaire
32
information sheet
33
products available
34
Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DCPI number ready when calling.
4
ITEM
DESCRIPTION
QUANTITY
00582
right drawer side
3
00583
left drawer side
3
02848
drawer back
3
03604
drawer divider
1
06020
drawer bottom
3
09406
back panel
1
EB
top drawer front
1
EC
middle and bottom drawer front
2
FH
left side
1
HG
right side
1
KD
back rail
1
FI
left spacer
1
HH
right spacer
1
KE
center rails
2
LD
top
1
PB
top / bottom rail
2
LD
FH
09406
FI
PB
KE
KE
HG
KD
00583
03604
PB
02848
EB
HH
06020
EC
00582
5
hardware
10401
20203
20212
20228
21839
x20
x16
x8
x24
x6
panel clip
small dowel pin
large dowel pin
25483
26020
26085
26214
31567
x6
x6
x15
x6
x22
short system screw
long system screw
drawer knob screw
31683
63001
81039
x22
x4
x6
cam
floor glide
drawer fastener
drawer glide screw
drawer glide spacer
cam bolt
drawer knob
6
hardware
11403
41432
88042
94009
x2
x6
x1
x2
drawer insert wire
Warning Label
wall attachment strap
drawer glide
7
how to use the cam lock system
1
2
3
CORRECT
NOT
CORRECT
Press can into pre-drilled hole with
the arrow pointing toward the side hole.
Push the bolt all the way into
the side hole.
4
5
NO GAP
With all cam & bolts installed,
align and push the panels together.
- NO GAPS
6
12:00
2:00
LOCKED
TIGHTEN
Insert the tip of a screw driver into the cam.
(MAKE SURE PANELS HAVE NO GAPS)
Turn cam clockwise to tighten.
Secure connection by turning arrow on
the cam to 2 O´clock to smoothly lock
panels together. (The cam bolt will fit loosely
until the cam is tightened).
8
step 1 drawer assembly - insert cams
00583
00582
x3
31567
31683
x12
x12
cam
cam bolt
1.
Place the cams into the large holes on the drawer sides, so that the arrow is
facing the edge of the drawer side. Press cam bolts into the holes on the edge
of the drawer sides. Do not turn the cams at this time.
9
step 2 drawer assembly - attach drawer bottom to back
02848
06020
finished side up
x3
paper
1.
2.
3.
Press the drawer bottom 06020 (with the finished side up) into the grooves on the drawer back 02848.
Paper overlays the slot, but it has a slit so drawer bottom inserts well.
Repeat these steps for all three drawers.
10
step 3 drawer assembly - attach drawer sides
00582
02848
finished side up
06020
20228
x24
x3
drawer fastener
00583
1.
2.
Align holes at back of the drawer sides, 00582 and 00583 with the holes on the
drawer back 02848. Make sure the groove on the drawer back is facing the inside of
the drawer. Tap drawer fasteners into place with a hammer.
Repeat these steps for all three drawers.
11
step 4 drawer assembly - attach top drawer front
02848
00582
06020
00583
EB
12:00
2:00
LOCKED
Secure connection by turning arrow on
the cam to 2 O´clock to smoothly lock
panels together. (The cam bolt will fit loosely
until the cam is tightened).
1.
Place the cam bolts on the drawer sides into the holes on the back of the drawer front.
Tighten cams to the 2 o’clock position.
12
step 5 drawer assembly - attach middle and bottom drawer front
02848
00582
06020
00583
EB
12:00
2:00
LOCKED
x2
Secure connection by turning arrow on
the cam to 2 O´clock to smoothly lock
panels together. (The cam bolt will fit loosely
until the cam is tightened).
1.
Place the cam bolts on the drawer sides into the holes on the back of the drawer front.
Tighten cams to the 2 o’clock position.
13
step 6 drawer assembly - install panel clips
IMPORTANT.
The panel clips
stabilize the drawer.
90
°
8"
00582
EB+EC
06020
10401
x12
02848
panel clip
00583
1.
2.
x3
Place the thin edge of the panel clips into the groove between the drawer bottom 06020
and the drawer back, top drawer front EB and middle and bottom drawer front EC.
Tighten the screws on the support clips but do not over tighten.
14
step 7 drawer assembly - install divider, warning label and drawer knob
02848
00582
03604
EB
00582
00583
11403
25483
81039
88042
x2
x6
x6
x1
02848
EB
drawer knob
00583
drawer knob screw
drawer
insert wire
x2
warning label
1.
2.
3.
4.
Press drawer insert wires into the holes at the center of the drawer front and back.
Slide the drawer divider over the wires until it touches the drawer bottom.
Attach warning label to the inside of the drawer side.
Use the drawer knob screws to attach the drawer knob to the topdrawer front EB and EC.
15
step 8 case assembly - insert large dowel pins and cams
PB
20212
31567
31683
x8
x4
x4
x2
cam
large dowel pin
1.
2.
cam bolt
Insert large dowel pins into small holes on the ends of the top/bottom rail PB.
Insert cams into the large holes near the ends of the top/bottom rail PB, so that
the arrow is facing the end of the rail.Do not turn the cams at this time.
16
step 9 case assembly - insert cams and small dowel pins
HG
FH
KD
KE x 2
20203
31567
31683
x16
x6
x6
cam
small dowel pin
cam bolt
1.
2.
3.
Place the cams into the large holes on HG, FH and KD, so that the arrow is
facing the edge of the panel.
Press cam bolts into the holes on the edge of HG, FH and KD. Do not turn the
cams at this time.
Insert small dowel pins into small holes on the ends of the HG, FH, KD and KE.
17
step 10 case assembly - attach side spacers to side panels
finished side up
6"
front
(finished edge)
finished side up
6
"
1/4
HH
HG
6"
FH
FI
26085
x6
61
/4 "
front
(finished edge)
long system screw
1.
2.
Place left and right spacers on HG and FH. Make sure that the finished edge is toward the
front and the finished side is facing up.
Use 3 of the long system screws to attach each of the side spacers to the side panels.
18
step 11 case assembly - drawer glide detail
front of glide
back screw location
21839
26085
41432
x6
x6
x6
drawer glide
spacer
long system
screw
x6
drawer glide
1.
2.
3.
Slide the drawer glide to the open position, then place a long system screw into the back hole as shown on the drawing.
Note: Oil is on slide for lubrication. Use care in handling, so that lubricant is not transferred to the product.
Place a drawer glide spacer over the long system screw that was just inserted into the drawer glide. The drawer glide is ready to be
installed to the side panel (step 12 on the next page)
Repeat this step for each ot the remaining glides.
19
step 12 case assembly - attach drawer glides
front of glide
front screw location
front
(finished edge)
HH
HG
26020
x6
FI
FH
front
(finished edge)
short system
screw
1.
2.
3.
Place drawer glide with back screw and spacer (from step 11) so that the
screw is over the back hole of the side panel, then tighten screw.
Move the front of the glide until you can see a drilled hole through the slot on
the glide, then use a short system screw to attach the front of the glide.
Repeat for the remaining drawer glides.
20
step 13 case assembly - attach top/ bottom rails and back rail
finished edge
finished edge
PB
KD
PB
12:00
FH
2:00
LOCKED
front
(finished edge)
FI
Secure connection by turning arrow on
the cam to 2 O´clock to smoothly lock
panels together. (The cam bolt will fit loosely
until the cam is tightened).
1.
2.
Place the dowels on the end of the top/bottom rails PB into the holes at the top and bottom of the
left spacer FI.
Make sure the finished edge is facing toward the front. Tighten the cams to the 2 o’clock position.
Place the dowels and cam bolt on the end of KD into the holes at the bottom of the side panel FH.
Make sure the groove on the back rail is toward the top of the chest
( this groove will hold the back panel). Tighten the cams to the 2 o’clock position.
21
step 14 case assembly - attach center rails
finished edge
PB
KD
KE
KE
unfinished side
unfinished side
PB
FH
front
(finished edge)
1.
FI
Place dowels on the ends of the center rails onto the holes on the side spacer.
Make sure the finished edge is facing toward the front and that the unfinished
side is facing toward the bottom of the case.
22
step 15 case assembly - attach right side - This step is easiest with two people
HG
front
(finished edge)
PB
KE
KD
KE
PB
FH
front
(finished edge)
FI
LOCKED
2:00
1.
2.
Place right side over the dowels on the rails that have already been attached to the left side.
Press dowels on all rails into the holes on the right side panel HG and right spacer. It is
easiest to start with the bottom rail PB and back rail KD and work your way toward the top.
Tighten the cams to the 2 o’clock position.
12:00
Secure connection by turning arrow on
the cam to 2 O´clock to smoothly lock
panels together. (The cam bolt will fit loosely
until the cam is tightened).
23
step 16 case assembly - insert back panel
09406
FH
KE
HG
PB
KD
1.
2.
Slide the back panel into the grooves on the side panels.
Line up the bottom of the back panel so that it slides into the groove on the
back rail KD. Note: the panel will be slightly above the top of the side panels,
even when inserted completely.
24
step 17 case assembly - attach top panel
LD
finished edge
KE
FH
LOCKED
2:00
12:00
Secure connection by turning arrow on
the cam to 2 O´clock to smoothly lock
panels together. (The cam bolt will fit loosely
until the cam is tightened).
1.
HG
PB
KD
Place the holes on the top panel over the dowels and cam bolts on the side
panels. Tighten the cams to the 2 o’clock position.
25
step 18 case assembly - attach top rail
LD
KE
FH
HG
26085
x3
PB
KD
long system screw
1.
Use 3 long system screws to attach the top rail to the top panel.
26
step 19 case assembly - install panel clips
2"
90
°
4"
IMPORTANT.
The panel clips
stabilize the dresser.
LD
09406
10401
FH
x8
KD
HG
PB
panel clip
1.
2.
Place the thin edge of the panel clips into the groove between the back panel
09406 and the top LD, back rail KD and side panels HG and FH.
Tighten the screws on the support clips but do not over tighten.
27
step 20 case assembly - attach floor glide
FH
09406
KD
HG
PB
63001
x4
floor glide
1.
Use a hammer to attach floor glides to the bottom of the side panels FH and
HG as shown.
28
step 21 case assembly - mount wall attachment strips
2
1
3
1 1/5"
IMPORTANT.
The screw supplied together with the wall attachment strip
is to be used only for fixing the wall attachment strip to the
furniture.
In addition to this, you vill need to choose a screw or
fitting which is suitable for securing the bracket to the
kind of walls you have. If you are unsure about what type
of screw to usee contact your local handware store.
Wall attachment strip are required to be installed.
94009
x2
LD
FH
HG
wall attachment strap
1.
2.
3.
Place the dresser in the desired position against the wall. Mark the locations of
the gow wall attachment slots at the top of the case.
Mesure down 1 1/5" from the mark at the top of the case and attach the two
wall with washers and screws.
Note - The washers and screws for wall attachment should be purchased from
a hardware store to suit the typw of wall .
Pass the wall attachment straps through the slots at the top back of the case,
and attach them to the underside of the case top with the screws and washers
that are included in the park.
29
step 22 case assembly - attach drawer assembly
LD
EB
EC
HG
26214
x6
EC
drawer glide screw
1.
2.
3.
4.
Slide groove on drawer sides over the drawer glide.
Pull the slide forward until the threaded hole on the glide aligns with the hole in the drawer side.
Attach glide screw from inside the drawer box into the drawer glide.
Second hole on drawer slide is not used.
30
specification sheet
3 YEAR WARRANTY:
All Tvilum furniture is warranted to the original
purchaser at the time of purchase and for 3
years after the purchase date. We warrant to
you, the original purchaser, that our furniture
and all furniture parts and components are free
of defects in material or workmanship. The
word “defects” as used in this warranty is
defined as any imperfections which impair the
use of the furniture.
Our warranty is expressly limited to the replacement or repair of furniture parts and
components and Tvilum will have a reasonable
amount of time to remedy said defect. This
warranty applies under conditions of normal
use. The warranty does not cover defects
caused by improper assembly or disassembly
defects occurring after purchase due to
intentional damage, product modifications,
exposure to the elements, accidents, misuse,
abuse or negligence and labor or assembly
costs.
All implied warranties, including the warranty of
merchantability shall not extend beyond the
duration of the written warranty stated above.
Tvilum liability is expressly limited to the costs
of material for repair or replacement of
defective goods and in no event will Tvilum be
liable for incidental or consequential damages
resulting from use of the product. Some states
do not allow limitations on how long an implied
warranty may last or the exclusions or
limitations of incidental or consequential
damages, so the above limitations and
exclusions may not apply to you.
30 kg
66 lbs
10 kg
22 lbs
10 kg
22 lbs
This warranty gives you specific legal rights
which may vary from state to state.
Any claims made under this warranty must be
presented in writing to:
d-SCAN
2195 Philpott Road
P.O. Box 1067
South Boston, VA 24592
31
32
This product will ensure you:
· A product tested for harmful substances · Safe furniture for use in your home
The furniture has been safety tested and
Helps to maintain healthy indoor climate
approved
· Wood from sustainable forestry
· Minimum 25% post consumer recycled
The furniture is PEFC-certified
materials
Read more at www.tvilum.com
33
Full Circo Kids collection available for purchase
Night Stand / Side Table
3 Drawer Dresser
5 Drawer Dresser
Desk
In stores
In stores
DPCI # 249 - 20 - 0200 (White)
DPCI # 249 - 20 - 0210 (Chocolate)
DPCI # 249 - 20 - 0201 (White)
DPCI # 249 - 20 - 0211 (Chocolate)
On Target.com
On Target.com
On Target.com
On Target.com
DPCI # 249 - 20 - 0200 (White)
DPCI # 249 - 20 - 0210 (Chocolate)
DPCI # 249 - 20 - 0201 (White)
DPCI # 249 - 20 - 0211 (Chocolate)
DPCI # 242 - 17 - 9388 (White)
DPCI # 242 - 17 - 9389 (Chocolate)
DPCI # 249 - 20 - 0203 (White)
DPCI # 249 - 20 - 0213 (Chocolate)
Toy Box
In stores
9 Cube Bookcase
In stores
In stores
In stores
DPCI # 249 - 20 - 0203 (White)
DPCI # 249 - 20 - 0213 (Chocolate)
Armoire (incl. toybox)
In stores
6 Cube Bookcase
In stores
DPCI # 249 - 20 - 0202 (White)
DPCI # 249 - 20 - 0212 (Chocolate)
On Target.com
On Target.com
On Target.com
On Target.com
DPCI # 242 - 17 - 9397 (White)
DPCI # 242 - 17 - 9398 (Chocolate)
DPCI # 242 - 17 - 9400 (White)
DPCI # 242 - 17 - 9401 (Chocolate)
DPCI # 242 - 17 - 9402 (White)
DPCI # 242 - 17 - 9399 (Chocolate)
DPCI # 249 - 20 - 0202 (White)
DPCI # 249 - 20 - 0212 (Chocolate)
Twin Headboard
In stores
Trundle (for Twin Bed)
In stores
DPCI # 249 - 20 - 0205 (White)
DPCI # 249 - 20 - 0215 (Chocolate)
Twin Bed (incl. solid pine slats)
In stores
Loft Bed (incl. solid pine slats)
In stores
DPCI # 249 - 20 - 0204 (White)
DPCI # 249 - 20 - 0214 (Chocolate)
On Target.com
On Target.com
On Target.com
On Target.com
DPCI # 249 - 20 - 0205 (White)
DPCI # 249 - 20 - 0215 (Chocolate)
DPCI # 242 - 17 - 9392 (White)
DPCI # 242 - 17 - 9396 (Chocolate)
DPCI # 249 - 20 - 0204 (White)
DPCI # 249 - 20 - 0214 (Chocolate)
DPCI # 242 - 17 - 9390 (White)
DPCI # 242 - 17 - 9391 (Chocolate)
34