1. No category

beka ledtwin
PHOTOMETRY
OVERVIEW
Number of LEDs
Current: 350mA
Current: 500mA
Current: 700mA
Neutral white (5000K)
Lifetime residual flux @ tq 25˚C (**)
12 LEDs
24 LEDs
36 LEDs
48 LEDs
Nominal flux (lm)*
–
–
4600
6200
Power consumption (W)
–
–
41
54
Nominal flux (lm)*
–
4300
–
–
Power consumption (W)
–
41
–
–
2800
–
–
–
30
–
–
–
Nominal flux (lm)*
Power consumption (W)
@60.000h
80%
The nominal flux is an indicative LED flux @ tj 25°C based on LED manufacturer’s data. The real flux output of the luminaire depends on environmental
conditions (e.g. temperature and pollution) and the optical efficiency of luminaire.
The type of LED used is subject to change due to the ongoing rapid progress taking place in LED technology.
(**)
In accordance with LM-80 – TM-21
(*)
ORDERING DATA
DESCRIPTION
LEDS
CURRENT (mA)
LUMEN
BEKA LEDtwin 4 30W
12
700
2 800
MASS (KG)
78
BEKA LEDtwin 4 41W
24
500
4 300
78
BEKA LEDtwin 4 41W
36
350
4 600
78
BEKA LEDtwin 4 54W
48
350
6 200
78
BEKA LEDtwin 6 30W
12
700
2 800
88
BEKA LEDtwin 6 41W
24
500
4 300
88
BEKA LEDtwin 6 41W
36
350
4 600
88
BEKA LEDtwin 6 54W
48
350
6 200
88
Standard optic: 5068 – urban road
Standard colour: Silver (RAL 9023)
options
ELECTRICAL
Switching/dimming control
Surge protection
Incorporated daylight switch
Pre-programmable stand-alone dimming
20kV/20kA
MECHANICAL
Back-to-back same height
Luminaire mounting
Back-to-back different height
Wall mount
Colour
Other RAL colours available on request
PHOTOMETRICS
5068 - Urban road
5091 - Residential street wide
5094 - Urban performance
Optics
5096 - Motorway
5098 - Narrow road
5102 - Major road
5103 - Major road wide
Manufactured by BEKA Schréder (Pty) Ltd - South Africa
Manufacturers of Luminaires and Glass Fibre Poles
09/14
BEKA Schréder (Pty) Ltd | 13 West View Road | P.O. Box 120 | Olifantsfontein | 1665 | South Africa
T: +27 11 238 0000 | F: +27 11 238 0180
[email protected] | www.beka-schreder.co.za
SANS 475
SANS60598
475
SANS
SANS 60598
beka
ledtwin
DIMENSIONS IN MM
options
Back-to-back same height
350
548
Impact resistance (glass):
IK 08 (**)
ambience lighting and floodlighting
Nominal voltage:
230V - 50Hz
• Luminaire tightness level: IP 65
Electrical class: I or II (*)
Weight (total): LEDtwin 4: 78kg
CONSTRUCTION DETAILS
LEDtwin 6: 88kg
The light structure consists of an aluminium extruded pole
Correlated colour temperature (CCT):
Neutral white light
arrangement and a sheet metal fabricated luminaire housing to
(5000K, CRI >70)
ensure optimal thermal dissipation and high ingress protection.
clear glass
2-5. The IP rating is certified by an SABS test report.
640
The luminaire housing is robustly constructed, weather proof,
550
Pole: Powder-coated
extruded aluminium
hail proof, corrosion proof and vandal resistant. The front glass is
Mounting height:
4m or 6m
mounted and siliconed to the frame which is held captive by four
Standard colour:
Silver (RAL 9023)
stainless steel screws, fastened to the housing. The gasket sealing
ø35
Cable entry hole
Wall mounted version
24
300
Base plate detail
400
Luminaire: Powder-coated 3cr12 The luminaire bears the SANS 60598-2-5 safety mark. It has an
ingress protection rating of IP 65 in compliance with SANS 60598Protector: Impact-resistant
Materials:
the frames are made of silicon sponge.
The LEDs are effective high-power LEDs, 5000K at a colour
according to SANS 60598-2-5
according to SANS 62262
(**)
5793
6010
configurations for all urban applications
• Multifunctional luminaire made to meet requirements of
10
Control gear compartment tightness level: IP 65
(*)
• Numerous luminaire mounting/light distribution
10
IP 65 (*)
3793
4010
Optical compartment tightness level: 280
LED luminaire
LED luminaire
CHARACTERISTICS – LUMINAIRE
ø20
rendering index >70.
Wall mount bracket
LED luminaire
252
Each LED is equipped with a lens to provide the desired light
APPLICATIONS
distribution. This offers a great diversity of light distributions
• Plazas
•Urban centres
for different applications, making it highly efficient compared to
• General area lighting
•Pedestrian walkways
conventional light sources (Lensoflex®).
• Parks and gardens
•Commercial districts
Electronic temperature monitoring prevents overheating of LEDs
• Prestigious and
and power supply (ThermiX®).
commemorative roads
The control gears are incorporated in the luminaire housing and
• Designed to operate LED light sources of up to 54W in an
are mounted on a removable gear tray. They are suitable for
operation with the specified rating of the lamp on a 230V ±14%
50Hz single phase system.
ambient temperature environment of up to 35˚C, without
The luminaire is power factor corrected to a minimum of 0,9.
reducing the useful lifetime of up to 60 000 hours, at a lumen
An additional surge protection device rated to 10kV/10kA is
depreciation of not more than 30% (L70, Tq 25˚C)
provided inside the gear compartment.
• No lamp or component replacement for more than 15 years
• Optional daylight switch version
OPTIONS
• Wide choice of photometric solutions for both efficiency and
• Incorporated daylight switch
visual comfort in the urban environment
• Surge protection up to 20kV/20kA
• Available in 4m and 6m versions
• Various pole configurations available
ø12 Hole
(For M10 rawl bolt)
light distributions
LED optic 5068
90˚
80˚
300 250 200 150 10050
LED optic 5091
cd/klm
70˚
250 200 150 100 50
90˚
80˚
30˚
0˚/180˚
30˚
10˚
0˚
90˚/270˚
0˚/180˚
10˚/170˚
0˚/180˚
20˚/160˚
70˚
0˚
90˚/270˚
30˚
0˚/180˚
15˚/165˚
0˚
90˚/270˚
0°
180°
270°
30˚
0˚/180˚
10˚/170˚
0°
180°
270°
0°
180°
270°
LED optic 5103
cd/klm
180°
15˚/165˚
60˚
50˚
270°
30˚
0˚/180˚
40˚
20˚
10˚
0˚
90˚/270˚
270°
20˚
10˚
0˚
90˚/270˚
20˚/160˚
90°
0°
180°
30˚
0˚/180˚
15˚/165˚
90°
0°
cd/klm
70˚
40˚
20˚
10˚
0˚
90˚/270˚
90°
450 400 350 300 250 200 150 100 50
90˚
80˚
60˚
50˚
40˚
20˚
10˚
500 400 300 200 100
90˚
80˚
70˚
60˚
50˚
40˚
20˚
10˚
LED optic 5102
cd/klm
90°
90°
0°
270°
30˚
500 400 300 200 100
90˚
80˚
90°
90°
180°
0˚
90˚/270˚
cd/klm
60˚
50˚
40˚
20˚
10˚
600 500 400 300 200 100
90˚
80˚
70˚
60˚
50˚
40˚
20˚
cd/klm
70˚
60˚
50˚
40˚
500 400 300 200 100
90˚
80˚
LED optic 5098
LED optic 5096
LED optic 5094
cd/klm
70˚
60˚
50˚
• Pre-programmable stand-alone dimming
• Low light pollution
• Easy installation and maintenance
Electronic data files can be downloaded from
www.beka-schreder.co.za/knowledge-base
200
150
KEY ADVANTAGES
660
550
363
8
100
(*)
660
548
250
180°
0°
270°
beka
ledtwin
DIMENSIONS IN MM
options
Back-to-back same height
350
548
Impact resistance (glass):
IK 08 (**)
ambience lighting and floodlighting
Nominal voltage:
230V - 50Hz
• Luminaire tightness level: IP 65
Electrical class: I or II (*)
Weight (total): LEDtwin 4: 78kg
CONSTRUCTION DETAILS
LEDtwin 6: 88kg
The light structure consists of an aluminium extruded pole
Correlated colour temperature (CCT):
Neutral white light
arrangement and a sheet metal fabricated luminaire housing to
(5000K, CRI >70)
ensure optimal thermal dissipation and high ingress protection.
clear glass
2-5. The IP rating is certified by an SABS test report.
640
The luminaire housing is robustly constructed, weather proof,
550
Pole: Powder-coated
extruded aluminium
hail proof, corrosion proof and vandal resistant. The front glass is
Mounting height:
4m or 6m
mounted and siliconed to the frame which is held captive by four
Standard colour:
Silver (RAL 9023)
stainless steel screws, fastened to the housing. The gasket sealing
ø35
Cable entry hole
Wall mounted version
24
300
Base plate detail
400
Luminaire: Powder-coated 3cr12 The luminaire bears the SANS 60598-2-5 safety mark. It has an
ingress protection rating of IP 65 in compliance with SANS 60598Protector: Impact-resistant
Materials:
the frames are made of silicon sponge.
The LEDs are effective high-power LEDs, 5000K at a colour
according to SANS 60598-2-5
according to SANS 62262
(**)
5793
6010
configurations for all urban applications
• Multifunctional luminaire made to meet requirements of
10
Control gear compartment tightness level: IP 65
(*)
• Numerous luminaire mounting/light distribution
10
IP 65 (*)
3793
4010
Optical compartment tightness level: 280
LED luminaire
LED luminaire
CHARACTERISTICS – LUMINAIRE
ø20
rendering index >70.
Wall mount bracket
LED luminaire
252
Each LED is equipped with a lens to provide the desired light
APPLICATIONS
distribution. This offers a great diversity of light distributions
• Plazas
•Urban centres
for different applications, making it highly efficient compared to
• General area lighting
•Pedestrian walkways
conventional light sources (Lensoflex®).
• Parks and gardens
•Commercial districts
Electronic temperature monitoring prevents overheating of LEDs
• Prestigious and
and power supply (ThermiX®).
commemorative roads
The control gears are incorporated in the luminaire housing and
• Designed to operate LED light sources of up to 54W in an
are mounted on a removable gear tray. They are suitable for
operation with the specified rating of the lamp on a 230V ±14%
50Hz single phase system.
ambient temperature environment of up to 35˚C, without
The luminaire is power factor corrected to a minimum of 0,9.
reducing the useful lifetime of up to 60 000 hours, at a lumen
An additional surge protection device rated to 10kV/10kA is
depreciation of not more than 30% (L70, Tq 25˚C)
provided inside the gear compartment.
• No lamp or component replacement for more than 15 years
• Optional daylight switch version
OPTIONS
• Wide choice of photometric solutions for both efficiency and
• Incorporated daylight switch
visual comfort in the urban environment
• Surge protection up to 20kV/20kA
• Available in 4m and 6m versions
• Various pole configurations available
ø12 Hole
(For M10 rawl bolt)
light distributions
LED optic 5068
90˚
80˚
300 250 200 150 10050
LED optic 5091
cd/klm
70˚
250 200 150 100 50
90˚
80˚
30˚
0˚/180˚
30˚
10˚
0˚
90˚/270˚
0˚/180˚
10˚/170˚
0˚/180˚
20˚/160˚
70˚
0˚
90˚/270˚
30˚
0˚/180˚
15˚/165˚
0˚
90˚/270˚
0°
180°
270°
30˚
0˚/180˚
10˚/170˚
0°
180°
270°
0°
180°
270°
LED optic 5103
cd/klm
180°
15˚/165˚
60˚
50˚
270°
30˚
0˚/180˚
40˚
20˚
10˚
0˚
90˚/270˚
270°
20˚
10˚
0˚
90˚/270˚
20˚/160˚
90°
0°
180°
30˚
0˚/180˚
15˚/165˚
90°
0°
cd/klm
70˚
40˚
20˚
10˚
0˚
90˚/270˚
90°
450 400 350 300 250 200 150 100 50
90˚
80˚
60˚
50˚
40˚
20˚
10˚
500 400 300 200 100
90˚
80˚
70˚
60˚
50˚
40˚
20˚
10˚
LED optic 5102
cd/klm
90°
90°
0°
270°
30˚
500 400 300 200 100
90˚
80˚
90°
90°
180°
0˚
90˚/270˚
cd/klm
60˚
50˚
40˚
20˚
10˚
600 500 400 300 200 100
90˚
80˚
70˚
60˚
50˚
40˚
20˚
cd/klm
70˚
60˚
50˚
40˚
500 400 300 200 100
90˚
80˚
LED optic 5098
LED optic 5096
LED optic 5094
cd/klm
70˚
60˚
50˚
• Pre-programmable stand-alone dimming
• Low light pollution
• Easy installation and maintenance
Electronic data files can be downloaded from
www.beka-schreder.co.za/knowledge-base
200
150
KEY ADVANTAGES
660
550
363
8
100
(*)
660
548
250
180°
0°
270°
beka ledtwin
PHOTOMETRY
OVERVIEW
Number of LEDs
Current: 350mA
Current: 500mA
Current: 700mA
Neutral white (5000K)
Lifetime residual flux @ tq 25˚C (**)
12 LEDs
24 LEDs
36 LEDs
48 LEDs
Nominal flux (lm)*
–
–
4600
6200
Power consumption (W)
–
–
41
54
Nominal flux (lm)*
–
4300
–
–
Power consumption (W)
–
41
–
–
2800
–
–
–
30
–
–
–
Nominal flux (lm)*
Power consumption (W)
@60.000h
80%
The nominal flux is an indicative LED flux @ tj 25°C based on LED manufacturer’s data. The real flux output of the luminaire depends on environmental
conditions (e.g. temperature and pollution) and the optical efficiency of luminaire.
The type of LED used is subject to change due to the ongoing rapid progress taking place in LED technology.
(**)
In accordance with LM-80 – TM-21
(*)
ORDERING DATA
DESCRIPTION
LEDS
CURRENT (mA)
LUMEN
BEKA LEDtwin 4 30W
12
700
2 800
MASS (KG)
78
BEKA LEDtwin 4 41W
24
500
4 300
78
BEKA LEDtwin 4 41W
36
350
4 600
78
BEKA LEDtwin 4 54W
48
350
6 200
78
BEKA LEDtwin 6 30W
12
700
2 800
88
BEKA LEDtwin 6 41W
24
500
4 300
88
BEKA LEDtwin 6 41W
36
350
4 600
88
BEKA LEDtwin 6 54W
48
350
6 200
88
Standard optic: 5068 – urban road
Standard colour: Silver (RAL 9023)
options
ELECTRICAL
Switching/dimming control
Surge protection
Incorporated daylight switch
Pre-programmable stand-alone dimming
20kV/20kA
MECHANICAL
Back-to-back same height
Luminaire mounting
Back-to-back different height
Wall mount
Colour
Other RAL colours available on request
PHOTOMETRICS
5068 - Urban road
5091 - Residential street wide
5094 - Urban performance
Optics
5096 - Motorway
5098 - Narrow road
5102 - Major road
5103 - Major road wide
Manufactured by BEKA Schréder (Pty) Ltd - South Africa
Manufacturers of Luminaires and Glass Fibre Poles
09/14
BEKA Schréder (Pty) Ltd | 13 West View Road | P.O. Box 120 | Olifantsfontein | 1665 | South Africa
T: +27 11 238 0000 | F: +27 11 238 0180
[email protected] | www.beka-schreder.co.za
SANS 475
SANS60598
475
SANS
SANS 60598