1. technology and computing

Catalogue
Advanced Sound and Vibration Technology 1
Table of Contents
BK1611 Compression Unit
34
BK2011 C-mic Tester Lite
12
BK2015 Series C-Microphone Interface
17
BK2017 Multi Channel Linear Vibration Motor Current & Isolation Tester
22
BK2019A Multi Channel Linear Vibration Motor Aging Tester
24
BK2019B Linear Motor Tester Lite
25
BK2019 Speaker/Receiver Unit Test Generator
5
BK2020 Vibration Unit Tester
21
BK2021 50 Channel Linear Vibration Motor Aging Tester
26
BK2022 Multi Channel Vibration Aging Tester
23
BK2027 Unbalance Tester
29
BK2110 Audio Level Analyzer
BK2118 Piezo Actuator Multi Tester
BK2120NA Speaker Receiver Unit Tester
BK2120NC 2 Ch Linear Vibration Motor Tester
6
20
3
19
BK2120NL Speaker Receiver Unit Tester (without Rub & Buzz)
4
BK2121 Earbud Function Tester
9
BK3010V2 C-Mic Tester
10
BK3012V2 D-Mic Tester
11
BK3013 Remote Control Voice Recognition Tester
13
BK8017 8 Channel Auto-Loading Linear Vibration Motor Test System
27
BK8018B Multi Channel Vibration Motor Aging Tester
28
BK8020 ECM Noise Under RF Test System
31
BK8021 Handset Noise Under RF Test System
32
BK8612 Camera Barrel Motor Noise Test System
30
BK9010B C-Mic Auto-Test System
14
BK9012 8 Channel Speaker/Receiver Unit Tester
7
BK9013 D-Mic Auto Test System
15
BK9015 Silicon Microphone 8 Channel Auto Test System
16
BK9024 Mobile Handset Voice Quality Test System
33
BO1032 Mouth Simulator
18
BP1090 Series Couplers
8
2 Advanced Sound and Vibration Technology
Cellphone Testers
31
Mic Testers
10
Other Testers
34
Speaker/Receiver Earbud Testers
3
Vibrating Device Testers
29
Vibration Motor Testers
19
Advanced Sound and Vibration Technology 3
Speaker/Receiver Unit Tester
-Type BK2120NA/BK2120A2
BaKo’s New Type BK2120NA Speaker/Receiver
Unit Tester, also known as the BK2120A2, is an
upgrade of our popular BK2120A Audio Analyzer.
Our redesign of the BK2120A hardware makes it
easier to set up, and our new software interface
allows you more versatility with the same speed
and accuracy.
More versatility means that you can use
either one or two sweeps to test frequency
characteristics and Rub & Buzz. Results
appear in seconds in your choice of formats,
whether you choose to simply check whether your DUT’s pass or fail, or need more
detailed information to see exactly where any problems occur. Messages for both
passing and failing can be custom tailored so you can make testing as easy or as
sophisticated as you need, to minimize your training time, and maximize reliability.
But the core system is still the same. You can test up to 2 DUT’s simultaneously
to quickly get accurate test results on the quality of microspeakers, receivers or
earphones on your product line. With the BK2120NA, you ensure your production is
succeeding in the short term and is stable in the long term.
Features and Uses:
Measures:
Features:
Uses:
• F.R.F
• Sensitivity
• SPL
• T.H.D.
• Impedance
• F0, Q
• Polarity
• Rub & Buzz
• L/R Balance
• Simultaneously Test Acoustics and
Impedance
• Test Acoustic Characteristics and Rub &
Buzz on One Machine
• Test DUT’s Independently
• Measure a Variety of Items
• ICP Microphone Support (B&K CCLD Type)
• Advanced Noise Test Algorithm
• Fast Measurement and Simple Operation
• DSP Based Processing
• Even Easier Setup & Configuration
• 4 or 8 DUT’s (auto-test system; option)
• Measure Characteristics
and Sound Quality
• Test headsets’ and
earphones’ Sound Quality
and Balance
• Measure Rub & Buzz
• In QA, QC or on the
Product Line
Advanced Sound and Vibration Technology
4 Advanced Sound and Vibration Technology
Speaker/Receiver Unit Tester
-Type BK2120L2
BaKo’s Type BK2120NL Speaker/Receiver Unit
Tester is a modification of our popular BK2120NA
Audio Analyzer for product lines that do not need
Rub & Buzz testing. The BK2120NL is easy to
set up, and our software interface gives you a lot
of speed, accuracy and versatility.
The new BK2120NL uses D.S.P. (Digital Signal
Processing) to test up to 2 DUT’s simultaneously
or independently so you can quickly get accurate
test results on the quality of microspeakers,
receivers or earphones on your product line.
And you can customize pass and fail messages
to quickly get the specific information you require to make testing as easy or as
sophisticated as you need, minimizing your training time, and maximizing your ability
to sort and make decisions.
You get an objective quality standard that you could not reliably apply using human
ears, so you can track quality using uniform standards. You can save data for
analysis in a spreadsheet so that you have accurate and up to date information on
your process and on deviations over time. With the BK2120NL, you ensure your
production is succeeding in the short term and is stable in the long term.
Features and Uses:
Measures:
Features:
Uses:
• F.R.F
• Sensitivity
• SPL
• T.H.D.
• Impedance
• F0, Q
• Polarity
• L/R Balance
• Simultaneously Test Acoustics and
Impedance
• Test DUT’s Independently on a Single
Machine
• Measure a Variety of Items
• ICP Microphone Support (B&K CCLD Type)
• Fast Measurement and Simple Operation
• DSP Based Processing
• Even Easier Setup, Configuration and
Upgrade
• 4 or 8 DUT’s (auto-test system; option)
• Measure Characteristics
and Sound Quality
• Test headsets’ and
earphones’ Sound Quality
and Balance
• Measure Rub & Buzz
• In QA, QC or on the
Product Line
Advanced Sound and Vibration Technology
Advanced Sound and Vibration Technology 5
Speaker/Receiver Unit Test Generator
-Type BK2019
We designed the BK2019 Speaker/
Receiver Test Generator to be a fast
and simple tester you can use for
speakers and receivers.
A golden ear can use it to generate
sound in a speaker for aural testing
and it shows you a pass or fail for
impedance on the screen.
Because it is so small and easy to set up, you can also use it for spot checking or as
a portable test unit for quality control.
Setting Up
It’s easy to set up the BK2019. Just set it on a surface that is accessible and easy to
see, plug the alligator clips into the generator at
the front and the foot pedal into the DIO port at
the rear. You can set up the speaker data,
the DUT limits and the sweep data in a
few minutes and then you are ready to
begin testing.
Features and Uses:
Features
• Single Purpose
• Easy to Use
• Portable
• Easy Setup and Configuration
• Can be situated almost anywhere
Advanced Sound and Vibration Technology
Uses
• Spot Checking
• Quality Control
• Portable Testing
6 Advanced Sound and Vibration Technology
Audio Level Analyzer
-Type BK2110
The BaKo Type BK2110 is a small, 2 channel
DSP based audio level analyzer you can
use to analyze a stereo signal from an
acoustic device. We designed it to measure
the AC level, THD, S/N, SINAD, Channel
Separation and Noise Level all at the same
time. Because it is DSP based, it can quickly
and accurately test high quality digital audio
devices.
The BK2110 is completely self contained
so it does not need to be linked to other
expensive and bulky machines and you can set it up and use it almost anywhere.
However it can be linked to a PC via a LAN cable.
Because of its simple menu layout, you can set it up and use it very easily. And
during testing, you can see the results as the DUT is tested or send them, via the
LAN interface, to a computer for analysis.
BaKo’s BK2110 Audio Level Analyzer is perfect for use in on the product line or for
QA or QC. It is easy to set up and use in any convenient location and it quickly gives
accurate results.
Features and Uses:
Measures:
• AC Level
• THD
• S/N
• SINAD
• Chanel Separation
• Noise Level
Features:
• ICP Power and Amplifier
• ADC and DSP
• Display and Keypad
• LAN Interface
• Portable and Easy to Use
Advanced Sound and Vibration Technology
Uses:
• In-Line testing
• Portable product testing
• Spot checking
Advanced Sound and Vibration Technology 7
8 Channel Speaker/Receiver Unit Tester
-Type BK9012
The BaKo Type BK9012 fully automatic
microspeaker Test System is our fastest system for
testing your microspeakers. It can simultaneously
test up to 8 microspeakers or receivers for standard
acoustic quality and for Rub & Buzz and then sort
them into the appropriate bins.
The BK9012 Microspeaker Test System consists
of a multi-channel unit based on the BK2120A
microspeaker tester and an automatic loading
system which loads 4 or 8 couplers at a time and
sorts the DUT’s according to the results. The
potential for sheer volume of testing makes this the economical solution if your
company counts its monthly output in millions.
When you begin testing, data from the couplers is sent from the DAQ to the PC
for analysis. Although you can monitor what is happening, the PC will determine
whether the DUT’s pass or fail and sort them into the appropriate bins based on the
grade of pass or the type of failure. The results can be saved to examine current
accuracy and trends in long term stability.
Features and Uses:
Measures:
Features:
Uses:
• F.R.F
• Sensitivity
• SPL
• T.H.D.
• Impedance
• F0, Q
• Polarity
• Rub & Buzz
• L/R
Balance
• Simultaneously Test Acoustics and
Impedance
• Acoustic Chars and Rub & Buzz
• Test DUT’s Independently on a Single
Machine
• Measure a Variety of Items
• ICP Microphone Support (B&K CCLD
Type)
• Advanced Noise Test Algorithm
Application
• Fast Measurement and Simple Operation
• DSP Based Processing
• Simple Setup, Configuration and Upgrade
• 4 or 8 DUT’s (auto-test system; option)
• Measure Micro Speaker
Characteristics and Sound
Quality
• Measure Receiver
Characteristics and Sound
Quality
• Test headsets’ and
earphones’ Sound Quality
and Balance
• Measure Rub & Buzz
• In QA, QC or on the Product
Line
Advanced Sound and Vibration Technology
8 Advanced Sound and Vibration Technology
Microspeaker/Receiver Couplers
-Type BP1090 Series
The BaKo Type BP1090 Series
Couplers were specially developed
to test microspeakers, receivers
and earbuds on your assembly
line. They were designed with three
factors in mind. First, results that
would accurately reflect the quality of
the DUT. Second, fast and efficient
loading/unloading and testing, and
last, being able to use them in a
small, convenient space.
Our couplers are constructed with
precision parts and topped with a jig
custom made for your DUT. Inside is a measuring microphone tested for consistency
and accuracy.
Using these couplers, results are significantly better than using a software noise
reduction solution alone, for two reasons. First, the hard shell of the coupler
Features and Uses:
Measures:
• Rub & Buzz
• F.R.F
• Sensitivity
• SPL
• T.H.D.
• Impedance
• F0, Q
• Polarity
• L/R Balance
Features:
Uses:
• Test Acoustic Characteristics and
Rub & Buzz
• Easy to Load and Unload
• Efficient use of Space
• Shields Microphone from Noise
Interference
• Test DUT’s Independently on a Single
Machine
• Easy to Change DUT’s
• Connects to a Variety of Machines
• Simple Setup and Configuration
• Measure Micro Speaker
Characteristics and Sound
Quality
• Measure Receiver
Characteristics and Sound
Quality
• Test headsets’ and earphones’
Sound Quality and Balance
• Measure Rub & Buzz
• In QA, QC or on the Product
Line
Advanced Sound and Vibration Technology
Advanced Sound and Vibration Technology 9
Earbud Function Button Tester
-Type BK2121
We developed the BaKo Type BK2121 in
response to Apple’s need to maintain quality
control in earbuds designed to be used with
newer IPods which contain function controls
and an internal microphone.
It is a compact, easy to setup, easy to use
machine with a short test time you can use to functionally validate each earbud unit
as it comes off the product line.
Function:
You connect the BaKo Type BK2121 to the DUT through a BX6110R10 Earphone
Extension Board. It contains a chip which enables it to simulate an Apple IPod and
provides regulated downstream power to the earbud unit, as well as a microphone
bias line. It detects the mode (Button or Tone Mode) and information in both Button
Mode and Tone Mode. The chipset will also detect the model ID of the microphone
and end the test if the incorrect model is connected.
Testing:
Testing in Automatic Mode is very easy. When you connect the earbuds, the timer
starts. If it detects the wrong ID, it will automatically “Fail”. Otherwise, you’ll see the
“mic” LED light up to indicate the mic is working and the model ID appear.
After the LED goes off, you can press +, - or ► on the cable in any order. When the
machine has received all these signals it switches to Button Mode. The user again
presses the +.—and ► buttons. If the entire process finishes before the timer counts
Features and Uses:
Tests:
• Switch Test (Tone Mode)
• Switch Test (Button Mode)
• Mode Change Test
• Mic ID Test
Features:
• Small Size
• Easy to Use
• Easy to Set Up
• Can Test Different Models
• OK/NG Lamp
Advanced Sound and Vibration Technology
Uses:
• Product Line Testing
• Quality Assessment
• Quality Control
10 Advanced Sound and Vibration Technology
C-Mic Tester
-Type BK3010V2
The BK3010V2 is the new, more
versatile version of the BK3010. It
was designed and manufactured
by BaKo to test the quality of
C-microphones on the assembly
line. It is still easy to set up or to
change to a new line but also gives
the added ability to connect to a computer, see your results there, and store them to
compare with each other or over time.
We specifically designed the BK3010V2 to use on your product line, in QA or QC,
so it uses DSP (digital signal processing) to enhance both speed and accuracy.
Because of its speed, versatility and accuracy, we also used it as the basis for the
BK9010B fully automatic C-mic test system and the BaKo Type BK3012 D-mic tester.
When you test a C-mic with the BK3010V2, it measures current to determine whether
there is an open or short circuit. Then it measures sensitivity in three frequency
bands and compares these sensitivities to make a quality determination based on
the differences. Your results are displayed in a custom format on the VFD screen so
quickly, they appear instantaneous.
The BK3010V2 is also available as the BK3010V2E MEMS Mic Tester.
Features and Uses:
Tests:
• Open
• Short
• Sensitivity (3 Band)
• Current
• Low, High Level
Tests:
• Open
• Short
• Sensitivity (3 Band)
• Current
• Low, High Level
Advanced Sound and Vibration Technology
Uses:
• Product Line Testing
• Quality Assessment
• Quality Control
Advanced Sound and Vibration Technology 11
D-Mic Tester
-Type BK3012V2
The BK3012V2 is the new, more versatile
version of the BK3012. It was designed
and manufactured by BaKo Company
to test the quality of D-microphones on
the assembly line. The BK3012V2 is still
easy to set up or to change to a new line
and it gives the added ability to connect
to a computer, see your results there, and
store them to compare with each other or over time.
The BK3012V2 measures current to determine whether there is an open or short
circuit. In addition, it measures sensitivity in three frequency bands. This means
you can not only assess the sensitivity in each band, but also compare the bands
and make quality determinations based on the difference. Because of its speed
and accuracy, we used the BK3012V2 as a basis for the BaKo Type BK9013, our 8
channel, fully automatic D-Mic Test System.
Setting up the BK3012V2 is very fast and easy because you can enter the DUT
and test specifications using the simple setup menu. And if you have special
requirements, we can customize your company’s machines for you.
Whether you use it in QA, QC or on your product line, the BK3012V2’s easy
operation and fast, accurate results make it the ideal tester for you.
Features and Uses:
Measures:
Features:
Uses:
• Open
• Short
• Sensitivity
• Current Limit
• Easy Setup and Configuration
• Simultaneous Current and 3 Band Sensitivity
• Virtually Instantaneous Results
• 10 Passing Ranks/6~7 NG Ranks
• Auto Calibration
• Can be Used Almost Anywhere!
• Product Line Testing
• Quality Assessment
• Quality Control
Advanced Sound and Vibration Technology
12 Advanced Sound and Vibration Technology
C-mic Tester Lite
-Type BK2011
If you use C-mics, our smallest and most
portable tester may be exactly what you
need.
Based on the BaKo Type BK3010, you can
use the Type BK2011 to measure the electric
and acoustic characteristics of C-mics.
Because it uses DSP (digital signal processing), the results are always very accurate
and almost instantaneous.
The BK2011 is so small (29cm x 26cm x 7.5cm) that you can use it almost anywhere.
And you can easily set it up in a few minutes. These two facts make it the ideal
portable tester, which you can use for spot checking, QA, QC, or even to maintain
quality as a regular product line tester.
As soon as the DUT is connected, the BK2011 starts testing automatically and
shows the test results on the VFD screen, indicating SPL of the sensitivity band,
current and capacitance (BK2011C). It will also indicate a short or open circuit.
Set up and testing are so easy that it only takes a few minutes to learn. If you need a
small portable machine to do basic c-mic testing, the BK2011 is for you.
Features and Uses:
Tests:
Features:
Uses:
• Open
• Short
• Sensitivity @1kHz
• Current
• Capacitance (2011C)
• MEMS Mic (2011D)
• Fast Results
• Portable & Simple
• Easy Setup and Configuration
• 8 OK Ranks/ 5 NG Ranks
• Can be Situated Almost Anywhere!
• In-Line testing
• Portable product testing
• Spot checking
• Tests Mics mounted
Advanced Sound and Vibration Technology
Advanced Sound and Vibration Technology 13
Remote Control Voice Recognition Tester
-Type BK3013
We designed the BaKo BK3013 Remote Control
Voice Recognition Tester to test microphones used
for voice recognition functions in television remote
controls. It uses BaKo’s familiar “Test Shop” software
in conjunction with the DAQ, making it easy to set up
and easy to use.
The BK3013 tests three properties of the remote
control functions. The Frequency Response Function
(FRF) is tested using a uniform SPL sweep generated
by the BK3013. The computer also tests Transient
Noise (TRN) and checks that appropriate RF information is received. To test for Non
Linear Processing (NLP), the BK3013 runs an SPL sweep at a single tone, which
allows you to see that the mic performs in a linear
fashion as the SPL increases.
You can enter your own specific feedback messages
for different types of results and the computer quickly
determines whether the results of both the FRF and
NLP tests fall within the limits you set and displays
either your custom message accordingly. It also
displays graphs of each test so you can see where the
DUT deviates from the parameters. Of course, you can
save the data in a spreadsheet format to evaluate at a
later time.
If you produce remote voice recognition units, the
BK3013 can help you maintain the quality you require
on your product line.
Features and Uses:
Tests:
• FRF
• NLP
Features:
• 1/3, 1/6, 1/12, 1/24 Octave Bands
• Constant SPL from 100Hz to 16kHz
• SPL Sweep
Advanced Sound and Vibration Technology
Uses:
• Product Line Testing
• Quality Assessment
• Quality Control
14 Advanced Sound and Vibration Technology
C-Mic Auto-Test System
-Type BK9010B
With the BaKo Type BK9010B Automatic C-Mic
Test System, you can test both the electric and
acoustic characteristics of up to 8 C-mics at once
to get accurate and almost instantaneous results.
The BK9010B C-Mic Test System consists of one
or two testers with couplers for 4 C-mics and an
automatic loading/sorting system which loads
couplers simultaneously and sorts the DUT’s
according to your results. The potential for sheer
volume of testing makes this the economical
solution if your company’s monthly output is in
the millions.
When the probes connect to the C-Mics on the
couplers, you can see your results on the screen almost immediately. The system
determines whether the DUT’s pass or fail and sorts them into the appropriate bin
based on the grade of pass or the type of failure. You can also save results to
analyze and to track accuracy and consistency.
If your company makes MEMS mics, consider the BK9010E MEMS Mic Test System,
a variation of the same system.
Features and Uses:
Measures:
Features:
Uses:
• Open
• Short
• Sensitivity
• Current
• Simultaneous Current and 3 Band Sensitivity
• Auto Calibration
• 2 X 4 Channel multi Couplers
• Virtually Instantaneous Results
• Auto sorting to 10 Passing Ranks/6~7 NG Ranks
• Product Line Testing
• Quality Assessment
• Quality Control
Advanced Sound and Vibration Technology
Advanced Sound and Vibration Technology 15
D-Mic Auto Test System
-Type BK9013
If you need a superfast, fully automatic D-Mic
Test System, try the BaKo Type BK9013. It uses
DSP (Digital Signal Processing) to measure
the electric and acoustic characteristics of up
to 8 D-Mics at once, making the results very
accurate and almost instantaneous.
The BK9013 D-Mic Test System is very easy
to use. All you need to do is pour some
microphones into the feeder and press the
“Start” button. The tester loads the mics,
performs the test and sorts them into bins
according to their passing rank or type of failure.
The entire process takes just a few seconds, meaning you can test millions of mics
per month.
The D-Mic Tester measures current to determine whether there is an open or short
circuit and also sensitivity in three frequency bands. And although you can monitor
what is happening, it is the system that determines whether the DUT’s pass or fail
based on specifications you enter after the hardware is set up.
And of course, you can save the results for analysis and to track accuracy and
consistency. If your company puts out millions of D-mics per month, the BK9013 is
the ultimate testing tool for quality control.
Features and Uses:
Measures:
Features:
Uses:
• Open
• Short
• Sensitivity
• Current
• Simultaneous Current and 3 Band Sensitivity
• Auto Calibration
• 2 X 4 Channel multi Couplers
• Virtually Instantaneous Results
• Auto sorting to 10 Passing Ranks/6~7 NG Ranks
• Product Line Testing
• Quality Assessment
• Quality Control
Advanced Sound and Vibration Technology
16 Advanced Sound and Vibration Technology
Silicon Microphone 8 Channel Auto Test System
-Type BK9015
If you’re making millions of mics per month, the
BaKo Type BK9015, our fully automatic MEMS
(Silicon) microphone sweep tester, is our tool
to help you keep your standards at the highest
level. It can test up to 48 mics per minute
(assuming a 10 second total test time), or over 2
million mics in a month.
The BK9015 is based on the BK3011 Audio
Analyzer, so unlike the simpler BK9010 MEMS
Mic Test System, it uses a uniform SPL sweep
test. This means you can have frequency data
such as FRF as well as current, impedance and
sensitivity over the full test range. As the data is
absolute, it’s also easy to compare to anechoic
chamber data. And the DSP (Digital Signal Processing) ensures that testing is both
fast and accurate.
Test data from the couplers is sent from the DAQ to the PC for analysis. You can
monitor what is happening but the system will determine whether the DUT’s pass or
fail and sort them into the appropriate bin based on the grade of pass or the type of
failure. You can save the results to examine the accuracy of your production process
or trends in long term product stability. The BK9015 is the ideal test solution for
companies with high volume mic production and is also available for D-Mics.
Features and Uses:
Measures:
• FRF
• Current
• Sensitivity
Features:
• 1/3 Octave Bands
• Constant SPL from 100Hz to 10kHz
• Current Level Test
• Auto Calibration
• 1X8 Channel Multi-Coupler
• Auto Sorting
• Custom Built Auto Loader and Coupler
Advanced Sound and Vibration Technology
Uses:
• Product Line Testing
• Quality Assessment
• Quality Control
Advanced Sound and Vibration Technology 17
C-Microphone Interface
-Type BK2015/2015A/2015B
The BaKo Type BK2015 is a
C-microphone interface system
designed so you can connect
your test equipment to a C-mic. It
provides power for the microphone
and returns the C-mic signal to the
connected equipment. If you are
setting up an in house mic testing
system, the Type BK2015 could be
an integral part.
We designed the BaKo Type BK2015 C-Mic Interface to be very versatile. The
internal setup menu allows the user to easily set up the RS-232C port, control
measuring, and input the C-mic specifications in order to consistently operate the
microphone during testing. An external resistor load may be connected to increase
flexibility.
There are three versions of the Type BK2015. The
original model is built to support 1 microphone
at a time. The Type BK2015A has a similar
function however is designed to support up to 8
microphones simultaneously. The BaKo Type
BK2015B is a custom designed C-mic interface
system we design for you.
The Type BK2015 can also be set up and operated
with a PC for use with an automatic system.
Features
C-Mic. Power
The power required to drive the C-Mic (0 – 9.99V) is controlled by the front panel
keypad or by the PC program
Features and Uses:
Features
• System Dependant
Features:
• Supports Multi-Channel Testing
• Supports Multi-Function Testing
• Automatic Test Process Control
• Flexible System Configuration
Advanced Sound and Vibration Technology
Uses:
• C-Mic (ECM) Test Systems
18 Advanced Sound and Vibration Technology
Mouth Simulator
-Type BO1032
The BaKo Type BO1032 Mouth Simulator is your
testing solution for the high quality mics you make
for modern consumer devices. Although relatively
compact and versatile, this coupler is capable of
delivering a clear constant SPL sweep that can be
used to test a mounted mic.
We built the BO1032 to be calibrated with a
measuring microphone so you can produce a
sweep with all frequencies at a given SPL. This
also means that you can consider the data from
the microphone absolute data and compare it
across couplers or to anechoic data.
The jig on top is custom made for your DUT. You can load and unload it quickly and
it will hold the mic at the MRP to receive the required tone or sweep. The jig stays
firmly in place but is easy to change. For calibration, there is a separate, specially
designed jig to hold the measuring mic in place. Preparing the coupler for a different
type of microphone is as easy as changing jigs.
The BO1032 Mouth Simulator was designed for use with the BK3011 Audio Level
Analyzer but because of its precision and versatility, you can use it as an effective
part of almost any mic test system.
Features and Uses:
Measures:
• F.R.F
• Sensitivity
• SPL
• T.H.D.
Features:
• Test Acoustic Characteristics in
Microphones
• Produces Absolute Data
• Easy to Load and Unload
• Efficient use of SpaceEasy to Change DUT’s
• Connects to a Variety of Machines
• Change DUT’s Easily
• Simple Setup and Configuration
Advanced Sound and Vibration Technology
Uses:
• Measure Microphone
Characteristics
• Measure Microphone
Sound Quality
• In QA, QC or on the
Product Line
Advanced Sound and Vibration Technology 19
2 Ch Linear Vibration Motor Tester
-Type BK2120C2
We redesigned our top selling BK2120C
Vibration Unit Tester based on customer
feedback. The BK2120NC is still fast,
accurate and easy to use but now it is
even easier to set up. You can enter
custom messages for when the DUT
meets specific conditions. And you can
prepare up to 4 sequences per test, to get
detailed results.
The BS1123 “Test Shop” program uses
various test algorithms and compares
your results to the specifications you
want. It maintains a high testing speed
as it measures both vibration and operating characteristics, as well as current, touch
noise, and polarity.
And of course you can save your results on the computer to analyze the accuracy
of your assembly process or to find trends in the longer term. And with its ability to
independently test two DUT’s concurrently on the same tester, the BK2120NC is still
the ideal machine to use in your R&D, QA/QC or on your manufacturing line.
Features and Uses:
Measurements:
Features:
Uses:
• FRF
• F0, F1, F2, Fc
• Vibration Level [g]
• Rising Time
• Falling Time
• Decay Rate
• Current at F0
• Touch Noise
• Polarity
• Measure Vibration & Operating
Characteristics
• Variety of Test Items/Sequences
• ICP Type Support (B&K CCLD
Type)
• Simultaneously or
Independently Tests 2 DUT’s
• DSP (Digital Signal Processing)
Based
• Data Statistics and Analysis
Available
• Touch Noise Test Algorithm
• Custom Feedback
• S & V Analysis Program
• Linear Motor Vibration
Characteristics
• Linear Motor Operating
Characteristics
• Touch Noise Measurement
• Test Manual Production Lines
• Test Automated Production
Lines
• Vibration Unit Analysis (R&D/
QA/QC)
• Data Recording and Feed
Back
• MFA/MDF Vibration
Characteristics
Advanced Sound and Vibration Technology
20 Advanced Sound and Vibration Technology
Piezo Actuator Multi Tester
-Type BK2118
As piezo actuators begin replacing vibration
motors in some smart phones, BaKo has created
the BK2118 Piezo Actuator Unit Multi Tester so you
can ensure quality.
Based on the popular BK2120C, the BK2118
measures both operating and vibration
characteristics, capacitance, touch noise and
polarity. It is versatile enough to work in R&D and
QA/QC as well as on your manufacturing line.
The BK2118 allows you to run up to 4 sequences
so you can test each DUT in several different
ways. You can also enter specific PASS and FAIL messages to tell you exactly how
a DUT has performed. The DSP based BK2118 is surprisingly fast and it has two
separate channels so that you can load one jig while the other channel is testing,
saving both time and space.
With our famous “Test Shop” program, testing is easy and you can save data for your
team to analyze later. And as with all BaKo equipment, if you need a feature that is
not already packed into this versatile machine, we will modify your systems to meet
your requirements.
Features and Uses:
• Measurements:
• FRF
• F0, F1, F2, Fc
• Vibration Level [g]
• Rising Time
• Falling Time
• Decay Rate
• Capacitance
• Touch Noise
• Polarity
Features:
Uses:
• Measure Vibration & Operating
Characteristics
• Variety of Test Items and Test
Sequences
• ICP Type Support (B&K CCLD Type)
• Simultaneously or Independently
Tests 2 DUT’s
• DSP (Digital Signal Processing)
Based
• Data Statistics and Analysis
Available
• Touch Noise Test Algorithm
• Custom Feedback
• ’Test-Shop’ S & V Analysis Program
• Piezo Actuator Vibration
Characteristics
• Piezo Actuator Operating
Characteristics
• Touch Noise Measurement
• Test Manual Production
Lines
• Test Automated Production
Lines
• Vibration Unit Analysis
(R&D/QA/QC)
• Data Recording and Feed
Back
• MFA/MDF Vibration
Characteristics
Advanced Sound and Vibration Technology
Advanced Sound and Vibration Technology 21
Vibration Unit Tester
-Type BK2020B
We developed the BK2020 to test
the RPM, current, drop pulse and
start up voltage of your cylindrical
or coin type vibration units. You
can also test vibration level, noise,
isolation resistance, and DC
resistance. It makes fast, reliable,
highly accurate measurements because it uses DSP (digital signal processing).
Although the BK2020 is completely self contained it is also very versatile: connect
it to an external speaker or to a separate device such as an oscilloscope or
spectroanalyzer to hear or see the test signal; using the LAN interface, you can
connect several BK2020’s to a controlling PC to enter DUT specifications or receive,
store and analyze all the DUT data. It even has a PLC interface for use in a fully
automatic system.
In spite of its power and versatility, the BK2020 is easy to use. The menu system is
well laid out so you can set it up in just a few minutes. The test procedure is simple
and the display is easy to understand. With all this power and simplicity, we think the
BK2020 is ideal for use on the product line or for QA, QC or product development.
Features and Uses:
Measures:
Features:
Uses:
• RPM
• Current
• Startup Voltage
• Drop Pulse
• Vibration
• Noise
• Isolation Resistance
• DC Resistance
• Multi-Function Test System (All-in-One)
• DSP = Stability and Accuracy
• Interface with External Devices
• Control Test Time Settings
• Memory and Storage Management
• Calibration Function for greater
Accuracy
• LAN Interface
• Vibration Unit Analysis Program (Option)
• Customized for your Company!
• In-Line testing
• Quality Control
• Product Development
Advanced Sound and Vibration Technology
22 Advanced Sound and Vibration Technology
Multi Channel Linear Vibration Motor Current & Isolation Tester
-Type BK2017
Based on the BK2019A Linear Vibration
Motor Aging Test System, we designed
BaKo’s BK2017 Linear Vibration Motor
Current and Isolation Tester to test both
current and isolation. Although designed to
give individual tests either manually or as
part of a fully automatic system, the BK2017
is also fully capable of doing aging testing as well.
The BK2017 performs two tests. Pressing the RUN button once performs the current
test. Pressing a second time performs the isolation test. It is able to test 8 DUT’s at
a time and tests all 8 simultaneously with results in 10ths of a second. Essentially, it
can test as fast as you can load the jigs.
You can buy the BK2017 as part of a fully
automatic test system, which can test your
DUT’s faster as they come off the assembly
line. Obviously, as part of a fully automatic
system, the load time decreases and it will
test even faster.
For aging testing, you can stack several machines to save space. In this case,
pressing the ENTER button starts the tests and switches the display between the
current test and the isolation test.
Features and Uses:
Features:
• Single Purpose & Easy to Use
• Multi Channel
• Portable & Stackable
• Easy Setup and Configuration
• Can be situated almost anywhere
• Can be connected to a PLC
Advanced Sound and Vibration Technology
Uses:
• Production Testing and Aging
• Quality Control
• As Part of a Fully Automatic System
Advanced Sound and Vibration Technology 23
Multi Channel Vibration Aging Tester
-Type BK2022
We made the BK2022 Vibration Unit (Motor) On/
Off Test System to test your vibration motors for
reliability over a long period of time. You can test
a maximum of 128 DUT’s at once as many times
as you need, to ensure your product will last its
expected life. It also monitors current and RPM.
After you have connected the DUT’s and
begun testing, the BK2022 continues testing
automatically and you can see the results in real
time on the screen. The BK2022 screen may be
switched between Total Count, Current or RPM.
You can also view the graphical information for a
selected DUT.
In addition, you can save the test data to an
Excel file or MS database so that when testing is
finished, you can see and analyze it according to
your company’s needs.
Because of the long testing times involved, you
would not normally use it to test every DUT from
a product line, but it is ideal for sample testing in
either quality control or quality assessment.
Features and Uses:
Measures:
• RPM
• Current
• Total Error
• RPM Error
• Current Error
• On/Off Error
Features:
• 128 Ch Simultaneous On/Off Tests
• Vibration Motor RPM, Current Measurement
• PC Display for 128 Ch
• DSP Provides Stable and Accurate Testing
• Variety of Interfaces
• Auto System Config for Connected Devices
• Adjustable Measuring Time
• Individual Memory Storage and Management
Advanced Sound and Vibration Technology
Uses:
• Production Testing
• Quality Control
• Parts Inspection
24 Advanced Sound and Vibration Technology
Multi Channel Linear Vibration Motor Aging Tester
-Type BK2019A
We designed the BK2019A Linear
Vibration Motor Aging Test System for
you to test your linear vibration motors
for long term reliability.
It will test 20 DUT’s at one time and
is easily stackable so you can test
hundreds of DUT’s simultaneously in
a small space. You control the number of tests so you can ensure your product will
last its expected life. It is ideal for sample testing in either quality control or quality
assessment.
Setting Up
Setting up the BK2019A is very easy. After you connect the jigs to the rear of the
machine, enter up to four sequences of sweeps and tones using the “Set” button
and the knob. The entire process takes just a few
minutes.
Testing
After the DUT’s are connected and the machine is
set up, you can begin testing by pressing the “Run”
button. The total number of tests completed, the
total number to be done and the sequence number
will be shown on the display. The LED’s on the front
of the machine tell the status of individual DUT’s.
Features and Uses:
Features:
• Single Purpose
• Easy to Use
• Portable & Stackable
• Easy Setup and Configuration
• Can be situated almost anywhere
Advanced Sound and Vibration Technology
Uses:
• Production Testing and Aging
• Quality Control
Advanced Sound and Vibration Technology 25
Linear Motor Tester Lite
-Type BK2019B
If you’re looking for a portable Linear
motor tester, the BK2019B is what you
need.
The BK2019B has many of the
capabilities of the BK2120C Linear
Vibration Motor Tester: it tests current
for open/short circuits, high/low current
and the operating current and also
uses a sensor to check the vibration level. However, it’s so small, that you can carry
it around in your briefcase.
And it is easy to set up and use. Because it has only a few functions, there are only
a few connectors. The buttons give immediate access to simple menus. The knob
makes scrolling faster.
Setting Up
Because of its size, you can set up the BK2019B
almost anywhere; set it on a surface that is accessible
and easy to see, plug in the (optional) speakers and
set the jig in front. Connect the Sensor Connector
(Rear) to the jig’s accelerometer. Once the hardware
Features and Uses:
Tests:
Features:
• Open
• Short
• High/Low Current
• Operating Current
• Vibration Level
• Fast Results
• Single Purpose
• Portable
• Easy Setup and Configuration
• Can be Situated Almost Anywhere!
Advanced Sound and Vibration Technology
Uses:
• In-Line Testing
• Portable Product Testing
• Spot Checking
26 Advanced Sound and Vibration Technology
50 Channel Linear Vibration Motor Aging Tester
-Type BK2021
Because you need to know that your
vibration motors are reliable, we designed
the BK2021 50 Channel Linear Vibration
Motor Aging Test System to make sure they
meet your quality standard.
The BK2021 will simultaneously test up
to 50 linear vibration motors in lots of 10 per tray and return a value of OK, Short
or Open so you know that every motor can stand up to the rigours of daily use. It
is ideal for either quality control as motors come off the product line, or quality
assessment before you use them as components.
Setting Up
Setting up the BK2021 is very easy. The
jigs connect to the rear of the machine.
Then use the simple setup menu to enter
up to 4 test sequences. The entire
process takes just a few minutes.
Testing
You don’t even need to start the test. The jig assembly consists of 5 jig drawers in
a single housing. After you load a jig tray with 10 DUT’s, close the jig drawer and
testing begins automatically on that jig. The DUT’s will be tested according to the
(up to 4) test sequences you have programmed into the BK2021 and then the drawer
Features and Uses:
Features:
• Single Purpose
• Easy to Use
• Easy Setup and Configuration
Advanced Sound and Vibration Technology
Uses:
• Production Testing and Aging
• Quality Control
Advanced Sound and Vibration Technology 27
Multi Channel Vibration Motor Aging Tester
-Type BK8018B
The BK8018B was designed and manufactured by the BaKo
Company of South Korea, to provide the highest quality aging
testing for vibration motors. It was modified from the BK8018
Aging Tester and can test up to 20 vibration motors at once,
turning them on and off (or leaving them on continuously) for
an extended period of time so you know that your motors can
stand up to years of use in consumer electronics.
The BK8018B is very easy to set up and use, so training
time is minimized. It monitors both the current and sensor
(accelerometer) data, which it can use to test current, RPM,
and the strength of vibration. Results are displayed in real
time on the screen and can be saved as a .csv file for analysis
in a spreadsheet.
If you need to ensure that
your vibration motors meet
your rigourous durability
standards, then this value-for-money system can
help.
Features and Uses:
Measures:
Features:
Uses:
• ● Vibration
• ● Current
• ● Vibration Error
• ● Current Error
• ● On/Off Error
• ● Total Error
• 20Ch Simultaneous On/Off Tests
• Vibration Measurement, Current
Measurement
• PC Display for 20 DUT’s
• DSP Provides Stable and Accurate
Testing
• Auto System Config for Connected
Devices
• Adjustable Measuring Time
• Individual Memory Storage and
Management
• Production Testing and
Aging
• Quality Control Sample
Testing
• Quality Assessment Sample
Testing
Advanced Sound and Vibration Technology
28 Advanced Sound and Vibration Technology
Unbalance Tester
-Type BK2027
If you need to measure unbalance
in electric motors in their
housings, with speeds of up
to 10,000rpm, the BaKo Type
BK2027 Unbalance Tester may
be the machine you’re looking
for. As a 2 channel Digital Signal
Processing (DSP) based system,
the BK2027 is capable of testing 2 motors at once and displaying the balance results
as either unbalance (cm.g), acceleration (m/s2) or vibration strength (g).
You can set up the BK2027 almost anywhere as a stand-alone machine simply by
plugging in the power cable and connecting the jigs to the BNC connectors at the
front. Then use the keypad and the VFD (display) on the front panel to enter the
DUT and test specifications from the setup menu. For additional functions, you can
also link it to a PC via a LAN cable.
A PC can display or save data as it is calculated by the machine. If your company
has more than one BK2027, it can be very useful to connect several machines to a
single PC and save information for analysis later. The PC can also be used to put
the specifications into the BK2027 — useful if you want several set up the same way.
Testing
You test two motors simultaneously so begin by loading both jigs with DUT’s. Then
press a button to run the test. Both DUT’s should start and the machine will begin
Features and Uses:
Measures:
• Vibration Level
• Acceleration
• Displacement
• Imbalance
Features:
• External Switch
• ICP Power and Amplifier
• ADC and DSP
• LAN Interface
• Portable and Easy to Use
Advanced Sound and Vibration Technology
Uses:
• In-Line testing
• Portable product testing
• Spot checking
Advanced Sound and Vibration Technology 29
8600 Series Noise and Vibration Measurement Systems
-Types BK8601, BK8602, BK8603
As cellphones become more
sophisticated and smaller, testing
resistance to RF interference is
becoming more and more important.
We designed the BaKo Type BK8021
Handset Noise Under RF Test System
in response to your need to improve
microphone immunity to RF interference
in cellular phones. It performs four tests
to evaluate the Sending Noise, Sending
Sensitivity, Sending Loudness, Sidetone
Masking, Receiving Sensitivity and
Receiving Loudness.
The system is designed to be run by the controlling PC, which allows automatic
configuration and which also runs the test sequence automatically. When you finish
testing, you can print the data as a report or save it for comparison and analysis.
The BK8021 comes in two parts. The power, DAQ and analysis equipment are all
housed in the cabinet. The semi-analytic chamber is set up to hold the DUT’s while
shielding them from outside RF and is separate.
Features and Uses:
Tests:
• Sound Level
• Vibration Level
• Overall Trends
Features:
Uses:
• Simultaneous Sound and Vibration Testing
• Real Time Graphical Display
• Store Results for Analysis
• Custom Modifications for a Variety of Uses
• Product Line Testing
• R&D
• QC & QA
Advanced Sound and Vibration Technology
30 Advanced Sound and Vibration Technology
Camera Barrel Motor Noise Test System
-Types BK8612
The BaKo Type BK8612 is a 2
Channel DSP based Camera
Barrel Motor Noise Test System
designed to provide the highest
quality sound and vibration testing
for your digital camera barrel DC
Motors.
The testing takes place in a semi anechoic chamber, where the camera barrel is
placed with both a microphone and an accelerometer to gather data. During testing,
the BK8612 runs a series of tests by adjusting the camera barrel using the DC Motor
and collecting data from the accelerometer and mic. The BaKo Type BK2120B DAQ
monitors both and sends the data to the PC for analysis. In the PC, the BS1123Opt006 Test Shop Program controls the test process and analyzes the data acquired.
The software performs analysis to determine the sound trend and the loudness. If
the data falls within all the parameters you entered, the DUT passes. If it falls outside
of a parameter, the DUT fails and you can easily see the reason. Passing and failing
graphs appear during testing so you can easily see the ‘shape’ of the vibrations.
Pass or fail is also shown at the top in a green or red box with the word “Pass” or
Fail” respectively.
You can set up Test Shop to save test data, which can be examined later using a
Features and Uses:
Tests:
• Sound Level
• Overall Trend
• Vibration Level
Features:
Uses:
• Simultaneous Sound and Vibration Testing
• Real Time Graphical Display
• Store Results for Analysis
• Product Line Testing
Advanced Sound and Vibration Technology
Advanced Sound and Vibration Technology 31
ECM Noise Under RF Test System
-Type BK8020
As cellphones become smaller and more compact, RF
immunity is becoming harder to achieve. The BaKo Type
BK8020 RF (TDMA) Noise Test System was designed to help
you improve microphone immunity to RF interference.
With this system, you can test microphones under RF noise
using a ‘Direct Injection Test’ in the frequency range of
5MHz~2.5GHz with an amplitude modulated (AM) disturbance
signal of 1kHz. As well, it checks for noise created by TDMA
signal bursts.
Each machine is custom made to match the needs of
your company. After your system arrives, we will arrive to
completely assemble it in a cabinet and conduct training with
the staff who will be using it.
Operation is simple. The system is designed to be run by
the controlling PC, to allow you to configure the system
automatically and which also runs the test sequence
automatically. You can see the data in real time, print it as an
MS Excel report or save it for comparison and analysis.
Features and Uses:
Tests:
Features:
Uses:
• Mic RF Noise
• Sending Noise
• Noise Level
• RF Immunity
• Fast Results
• Automatic System Config and Test Sequence
• International Measurement & Response Specs
• Excel Reports and Data for Comparison
• System Calibration Capacity
• Flexible Measureme
• Product Line Testing
• Quality Assessment
• Quality Control
Advanced Sound and Vibration Technology
32 Advanced Sound and Vibration Technology
Handset Noise Under RF Test System
-Type BK8021
As cellphones become more sophisticated
and smaller, testing resistance to RF
interference is becoming more and more
important. We designed the BaKo Type
BK8021 Handset Noise Under RF Test
System in response to your need to improve
microphone immunity to RF interference
in cellular phones. It performs four tests
to evaluate the Sending Noise, Sending
Sensitivity, Sending Loudness, Sidetone
Masking, Receiving Sensitivity and Receiving
Loudness.
The system is designed to be run by the
controlling PC, which allows automatic
configuration and which also runs the test sequence automatically. When you finish
testing, you can print the data as a report or save it for comparison and analysis.
The BK8021 comes in two parts. The power, DAQ and analysis equipment are all
housed in the cabinet. The semi-analytic chamber is set up to hold the DUT’s while
shielding them from outside RF and is separate.
Features and Uses:
Tests:
• Sending Noise
• Sending Sensitivity
• Sending Loudness Rating
• Sidetone Masking Rating
• Receiving Sensitivity
• Receiving Loudness Rating
Features:
• Automatic System Config and
Test Sequence
• International Measurement &
Response Specs
• Excel Reports and Data for
Comparison
• System Calibration Capacity
• Flexible Measurements
Advanced Sound and Vibration Technology
Uses:
• R&D
• Random Line Testing
Advanced Sound and Vibration Technology 33
Mobile Handset Voice Quality Test System
-Type BK9024
We designed the BaKo Type BK9024
Mobile Handset Voice Quality Test
System to test mobile phones for
quality on your production line. It
provides an accurate and objective
alternative to previous production line
testing, which relied on subjective
sensory evaluation. This is a great
tool for evaluating quality on your
production line not only because of
its accuracy, but because it is fast, it
can test and switch between up to 8
DUT’s at a time, and you can use it to easily track the accuracy and stability of your
production process.
The BK9024 is capable of several quick tests you can use to ensure the quality of
your entire cellphone. These include tests for voice, melody, maximum RF power,
HAC, current and call check quality.
It is also versatile enough that you can change the setup to accommodate a different
model of phone in just a few minutes without any major modifications. In this way,
you can use the same system as you upgrade your current models and develop new
ones.
BaKo usually customizes the system when we make it for you, however, if your
company is developing an in-house system, you can buy certain parts of the BK9024
separatedly.
Features and Uses:
Tests:
• Call Check
• Voice
• Melody
• RF Max. Power
• RF Sensitivity
• Current
Features:
• Supports Multi-Channel Testing
• Multi-Function Test Support
• (Voice, Melody, RF Parameters, DC)
• Automatic Test Process Control
• Flexible System Configuration
• Supports other Standards (eg GSM)
Advanced Sound and Vibration Technology
Uses:
• R&D
• Product Line Testing
• QC
34 Advanced Sound and Vibration Technology
Compression Unit
-Type BK1611
If you are doing research or calibration that
requires an extra-sensitive test system, the
BaKo Compression Unit Type BK1611 may
be just what you need. The Type BK1611
Compression Unit uses a real time feedback
loop to create a constant-level vibration
over a frequency sweep. We can create a
system by connecting it to a variety of potential components to make a complete test
system compatible with the type of DUT you plan to use. Although the systems vary,
they are made up of the following components.
Compression Unit
The Compression Unit houses a generator and a DSP to affect a simple feedback
loop in real time. This allows your DUT
to be examined under uniform conditions
for the entire length of the sweep.
PC/Software:
As the primary user interface, you use
the PC and the software to enter the
specifications you need, start the testing
process and produce custom designed
output, which can vary from a simple
graph on a monitor, to a printed list of calibration data.
Power Amplifier
The power amplifier accepts the signal from the generator in the Compression Unit
and amplifies it to the level needed.
Features and Uses:
Features:
• Custom Software
• Integrates with a variety of systems
• Provides Uniform Vibration at All Frequencies
• Self-Calibrates in Real Time
• 200Hz~48kHz
• Usable for Research or Line Testing
Advanced Sound and Vibration Technology
Uses:
• Testing Accelerometer Sensors
• Calibrating Accelerometer Sensors
• Testing microphones
• Calibrating microphones