1. home and garden

PC-Series™ Precision Linear Actuators
Optimize Your Machine and Save Energy
With Reliable, High Performance, Compact Actuators
www.thomsonlinear.com
Make the Change to Electric
Enjoy superior performance and save time and energy
Next generation machines and equipment need to be more
compact while delivering higher performance and more flexibility.
Making the change from pneumatic cylinders to electric actuators
can simplify your design and deliver savings at the same time.
Superior Performance
•Higher power density
• More accuracy
•Longer stroke lengths
• Quieter operation
•Side load capability
Time and Energy Savings
• Reduced energy costs
•Reduced setup and changeover time
• Fewer components than a pneumatic system
• No air leaks
• No compressor maintenance
Estimate Your Annual Energy Savings
Visit www.thomsonlinear.com/pc_calc to see how much you could save!
2
www.thomsonlinear.com
PC-Series™ Precision Linear Actuators
Electric Actuators vs. Pneumatic Cylinders
Designing with electric actuators instead of pneumatic cylinders results in fewer components,
better performance and a lower total cost of ownership.
Side-by-Side Comparison: Load Testing Equipment
Electric Design
1. Actuator / cylinder
2. Cables
3. Control box
---------------------4. Servo valve
5. Regulator
6. Air hoses
7. Valve block
8. Linear scale
9. Compressor
10. Other equipment
Pneumatic Design
1
5
2
9 10
1
4
6
7
2
3
3
Space required: ~ 0.4 m3
8
Space required: ~ 1.3 m3
Controllability
Load
Accuracy
Speed
Maintenance
Noise
Installed Cost
Operating Cost
Total Cost
Poor
Equipment shown performs the same operation and is shown in the same scale.
Fair
Good
Excellent
www.thomsonlinear.com
3
Build Flexibility into Your Processing Application
The complexities of many processing applications, including sanitary washdown requirements and
mixed product manufacturing lines, are easily accommodated by the Thomson PC-Series™ precision
linear actuators where IP65 rating is standard
Form, Fill and Seal Equipment
Filling heads move up and down rapidly and repeatedly on form, fill,
and seal equipment. Electric actuators provide an advantage with
higher precision and repeatability than a pneumatic solution.
Grading
Sorting arms and pushers move to shift product into distinct bins
in grading applications, often a consolidation point from many
production lines. The predictable life of electric actuators ensures
that the line will stay up as intended between maintenance cycles.
Converting and Container Manufacturing
Molding, can and box manufacturing equipment often require
several axes to move and operate in confined spaces in close
proximity to each other. By using electric actuators instead of
pneumatic cylinders you can save space and installation time while
improving the accuracy of the process.
Inspection
Testing tightening torque and checking seals is essential to overall
product quality. Electric actuators provide superior accuracy and
repeatability at this critical step.
4
www.thomsonlinear.com
PC-Series™ Precision Linear Actuators
Accelerate Your Packaging or Handling Application
Packaging and handling processes require speed to keep up with ever-increasing flow rates from
manufacturing lines. Higher speed does not have to mean higher energy consumption. Choosing
Thomson PC-Series™ electromechanical linear actuators can greatly reduce energy consumption
due to the fact that they use energy on demand.
Marking and Printing
Product quality and traceability are growing in importance as
regulations become more strict. Consistently placing the right label
on the right package in the right position is more critical than ever.
In addition, electric actuators are an ideal choice for the end of the
manufacturing line, where labels and printing often take place but
no air lines may be present.
Secondary Packaging
Automation is increasing at the end of the line, where products are
wrapped, cartoned, strapped, banded, and palletized for shipment.
The higher load capability of electric actuators enables more
compact machine designs that take up less floor space.
Conveying, Sorting and Pick and Place
Ensuring that the product is at the right place at the right time is an
essential part of running an automated manufacturing line, but the
product coming down the line can vary. When requirements change,
electric actuators allow you to change the end stop and fence
positions on your line quickly with a program change, instead of a
redesign and cylinder change.
Automated Storage and Retrieval
High duty cycles and harsh environments are common in automated
storage and retrieval systems. Reduce maintenance needs and
downtime while consuming less energy when you choose electric
actuators instead of pneumatics.
www.thomsonlinear.com
5
The PC-Series™ – Designed to Deliver Value
The design of a PC-Series™ precision linear actuator delivers extended life, high repeatability,
and quiet operation. In addition, it requires minimal maintenance and resists corrosion in harsh
environments.
1
2
3
4
6
5
6
7
8
Feature
Benefit
1
High precision ball nut
High repeatability and positioning accuracy
Smooth, quiet operation
2
Ball nut carrier (US patent pending)
High side load capability
Reduced noise
Built in anti-rotation of rod end
3
Single point lubrication
Quick and easy maintenance
4
Stainless steel extension tube
Suitable for heavy loads and harsh environments
5
Large diameter ball screw
High power density and long life
6
Smooth exterior profile
No collection points during washdown
7
Extension tube seal
IP 65 rating suitable for harsh environments
8
Stainless steel male rod adapter
Corrosion resistance
Simple mounting of ISO standard accessories
www.thomsonlinear.com
PC-Series™ Precision Linear Actuators
RediMount™ – Designed for Flexibility and Speed
The RediMount™ system is designed for seamless motor installation in less than five minutes.
It accommodates a wide range of motor types and sizes. Motor to actuator alignment is
guaranteed, ensuring a trouble-free connection and maximum system performance.
12
9
10
13
14
15
11
Feature
Benefit
Thomson RediMount™ motor flange
Mounting in less than five minutes
Pre-engineered to mount to more than 600 motors
10
Large, flexible coupling
High torque
11
Sealing plug
IP65 protection
12
Extra-wide synchronous belt
High thrust loads
13
Clamping element
Plug and play motor assembly
14
Large housing
Accommodates large frame motors
15
Straddle mounted pulley bearings
No radial load on motor shaft
9
RediMount™ Motor Mounting Steps
Insert motor shaft into coupling
www.thomsonlinear.com
Tighten motor mounting screws
Tighten motor coupling screws and
install sealing plug
7
Save on Design, Installation and Operating Time
The Thomson PC-Series™ has been designed and built to save you time at every step, from
selecting your actuator all the way through reducing the time required to maintain it.
Easy to Size & Select
• Size and select your PC-Series™ actuator in
less than 15 minutes using online selection tools
• Download configurable 3D CAD models
• Customize your solution (length, motor orientation, mounting adapters and screw leads)
Online selection tool
Quick and Reliable Installation
• Install in less than 5 minutes with the Thomson RediMount™ motor mounting system
• Use your own motor! RediMount is pre-
engineered for more than 600 different motor types and sizes
• Reduce time spent aligning the actuator and motor with the RediMount pre-aligned solution
• Easily upgrade your machine from pneumatics utilizing the PC- Series ISO standard mounting
interfaces
Reduced Maintenance
• Quick and effective washdowns due to streamlined profile and IP65 rating
• Quickly prepare actuator for lubrication by advancing to fully retracted position
• Corrosion resistant throughout
• Longer life due to high power density and ability to compensate for system misalignment
8
The RediMount system makes motor mounting fast and easy
Designed to withstand the harshest conditions
www.thomsonlinear.com
PC-Series™ Precision Linear Actuators
Product Family Overview
The PC-Series™ is available in three sizes (PC25, PC32 and PC40) and two styles (inline and
parallel).
Family Overview
Inline Style
Parallel Style
PC25
Screw Type
PC32
PC40
ball screw
ball screw
ball screw
[N]
1250
3200
6000
Max. Stroke
[mm]
600
1200
1200
Max. Speed
[m/s]
1.33
1.00
1.66
Profile Size
[mm]
34 × 34
45 × 45
55 × 55
Screw Diameter
[mm]
10
12
20
Screw Lead
[mm]
3, 10
4, 10
5, 10, 20
Protection Class
[mm]
IP65
IP65
IP65
Max. Load (Fx)
Accessories
A complete line of accessories is available – including
ISO compatible actuator mounting options, extension
tube adapters and limit sensors. See pages 16 - 21.
www.thomsonlinear.com
9
Specifications - PC25
Definition of Forces
Standard Features and Benefits
• Compact, robust and reliable
• Stroke up to 600 mm
• Load up to 1250 N
• Speed up to 1.33 m/s
• Stainless steel extension tube
• IP65 as standard
• Mounting accessories according to pneumatic ISO standard
Performance Diagrams
Load vs. Life
Load[N]
Screw lead [mm]
10
General Specifications
Parameter
Profile size (w × h) [mm]
34 × 34
Type of screw
ball screw
Protection class
Lubrication
3
PC25
IP65
one point lubrication of ball screw
Speed (mm/s)
Performance Specifications
Parameter
[mm]
600
Linear speed, maximum
[m/s]
1.33
Acceleration, maximum
[m/s ]
10
[± mm]
0.01
[rpm]
8000
Operation temperature limits
[°C]
-20 – +70
Dynamic load (Fx), maximum
[N]
1250
Dynamic load (Fy), maximum
[N]
20
Dynamic load (Fz), maximum
[N]
20
Dynamic load torque (Mz, My), maximum
[Nm]
10
Screw versions, diameter (d0) / lead (p)
[mm]
10/03, 10/10
Input speed, maximum
Drive shaft force (Frd), maximum
Critical Speed vs. Stroke
PC25
Stroke length (S max), maximum
Repeatability
Life [km]
2
[N]
100
Input torque, maximum (RediMount models)
[Nm]
2.3
Drive shaft torque (Mta), maximum
[Nm]
4.0
Screw lead [mm]
10
3
Stroke [mm]
Load [N]
Column Load Limit vs. Stroke
Stroke [mm]
10
www.thomsonlinear.com
PC-Series™ Precision Linear Actuators
Dimensions - PC25
Dimensions
Dimensions for Inline Style with RediMount Flange
Projection
METRIC
Bell House Length (C)
Motor shaft length [mm]
Flange A
C [mm]
19 - 24
52
24 - 29
57
29 - 34
62
34 - 39
67
Flange B
RediMount Flange Motor Dimensions Compatibility
Motor data
Flange A [mm] Flange B [mm]
Bolt circle diameter (BC)
43.8 - 48
Shaft diameter
5 - 11
Shaft length
19 - 39
Pilot diameter
16 - 36
Pilot length
A1: grease port
A2: M3 thread, max. depth 10 mm.
A3: male threaded rod end shown, see ordering key and accessories for information on all available ends.
A4: side of cover tube for mounting of sensors.
A5: distance to center of coupling tightening hole.
48 - 72
16 - 54
max. 4
Weight of Unit [kg]
0.543 + (S [mm] × 0.0021)
Dimensions
Dimensions for Parallel Style with RediMount Motor Flange
Projection
METRIC
RediMount Flange Motor Dimensions Compatibility
Motor data
Flange C [mm] Flange D [mm]
Bolt circle diameter (BC)
Flange D
51 - 72
Shaft diameter
5 - 10
Shaft length
13 - 35
Pilot diameter
Flange C
25 - 51
16 - 39
Pilot length
16 - 54
max. 4
Motor square/diameter
max. 66.5
Weight of Unit [kg]
0.778 + (S [mm] × 0.0021)
A1: grease port
A2: M3 thread, max. depth 10 mm.
A3: male threaded rod end shown, see ordering key and accessories for information on all available ends.
A4: side of cover tube for mounting of sensors.
www.thomsonlinear.com
11
Specifications - PC32
Definition of Forces
Standard Features and Benefits
•
•
•
•
•
•
•
Compact, robust and reliable
Stroke up to 1200 mm
Load up to 3200 N
Speed up to 1 m/s
Stainless steel extension tube
IP65 as standard
Mounting accessories according to pneumatic ISO standard
Performance Diagrams
Load vs. Life
Load[N]
Screw lead [mm]
10
4
General Specifications
Parameter
PC32
Profile size (w × h) [mm]
45 × 45
Type of screw
ball screw
Protection class
Lubrication
IP65
one point lubrication of ball screw
Speed (mm/s)
Performance Specifications
Parameter
PC32
Stroke length (S max), maximum
[mm]
1200
Linear speed, maximum
[m/s]
1
Acceleration, maximum
[m/s ]
10
[± mm]
0.01
[rpm]
6000
Operation temperature limits
[°C]
-20 – +70
Dynamic load (Fx), maximum
[N]
3200
Dynamic load (Fy), maximum
[N]
20
Dynamic load (Fz), maximum
[N]
20
Dynamic load torque (Mz, My), maximum
[Nm]
25
Screw versions, diameter (d0) / lead (p)
[mm]
12/04, 12/10
Repeatability
Input speed, maximum
Drive shaft force (Frd), maximum
Life [km]
2
[N]
300
Input torque, maximum (RediMount models)
[Nm]
5.1
Drive shaft torque (Mta), maximum
[Nm]
9.2
Critical Speed vs. Stroke
Screw lead [mm]
10
4
Stroke [mm]
Load [N]
Column Load Limit vs. Stroke
Stroke [mm]
12
www.thomsonlinear.com
PC-Series™ Precision Linear Actuators
Dimensions - PC32
Dimensions
Dimensions for Inline Style with RediMount Motor Flange
Projection
METRIC
Bell House Length (C)
Motor shaft length [mm]
Flange A
Flange B
C [mm]
20 - 27
59
27 - 34
66
34 - 41
73
RediMount Flange Motor Dimensions Compatibility
Motor data
Flange A [mm] Flange B [mm]
Bolt circle diameter (BC)
37 - 50
50 - 99
Shaft diameter
5 - 16
Shaft length
20 - 41
Pilot diameter
16 - 39
Pilot length
16 - 75
max. 4
Weight of Unit [kg]
0.681 + (S [mm] × 0.0034)
A1: grease port A2: M6 thread, max. depth 30 mm A3: no thread
A4: male threaded rod end shown, see ordering key and accessories for information on all available ends.
A5: side of cover tube for mounting of sensors. A6: distance to center of coupling tightening hole.
Dimensions
Dimensions for Parallel Style with RediMount Motor Flange
Projection
METRIC
RediMount Flange Motor Dimensions Compatibility
Motor data
Flange C [mm] Flange D [mm]
Bolt circle diameter (BC)
5 - 14
Shaft length
15 - 34
16 - 54
Pilot length
Flange D
72 - 99
Shaft diameter
Pilot diameter
Flange C
25 - 72
16 - 74
max. 4
Motor square/diameter
max. 82.5
Weight of Unit [kg]
1.221 + (S [mm] × 0.0034)
A1: grease port
A2: M6 thread, max. depth 30 mm A3: no thread
A4: male threaded rod end shown, see ordering key and accessories for information on all available ends.
A5: side of cover tube for mounting of sensors.
www.thomsonlinear.com
13
Specifications - PC40
Definition of Forces
Standard Features and Benefits
•
•
•
•
•
•
•
Compact, robust and reliable
Stroke up to 1200 mm
Load up to 6000 N
Speed up to 1.66 m/s
Stainless steel extension tube
IP65 as standard
Mounting accessories according to pneumatic ISO standard
Performance Diagrams
Load[N]
Load vs. Life
Screw lead [mm]
20
10
5
General Specifications
Parameter
PC40
Profile size (w × h) [mm]
55 × 55
Type of screw
ball screw
Protection class
Lubrication
IP65
one point lubrication of ball screw
Speed (mm/s)
Performance Specifications
Parameter
PC40
Stroke length (S max), maximum
[mm]
1200
Linear speed, maximum
[m/s]
1.66
Acceleration, maximum
[m/s ]
10
[± mm]
0.01
[rpm]
5000
Operation temperature limits
[°C]
-20 – +70
Dynamic load (Fx), maximum
[N]
6000
Dynamic load (Fy), maximum
[N]
50
Dynamic load (Fz), maximum
[N]
50
Dynamic load torque (Mz, My), maximum
[Nm]
25
Screw versions, diameter (d0) / lead (p)
[mm] 20/05, 20/10,
20/20
Repeatability
Input speed, maximum
Drive shaft force (Frd), maximum
Life [km]
2
[N]
650
Input torque, maximum (RediMount models)
[Nm]
5.8
Drive shaft torque (Mta), maximum
[Nm]
24
Critical Speed vs. Stroke
Screw lead [mm]
20
10
5
Stroke [mm]
Load [N]
Column Load Limit vs. Stroke
Stroke [mm]
14
www.thomsonlinear.com
PC-Series™ Precision Linear Actuators
Dimensions and Performance Diagrams - PC40
Dimensions
Dimensions for Inline Style with RediMount Motor Flange
Projection
METRIC
Bell House Length (C)
Motor shaft length [mm]
C [mm]
20 - 27
62
27 - 34
69
34 - 41
76
RediMount Flange Motor Dimensions Compatibility
Flange A
Flange B
Motor data
Flange A [mm] Flange B [mm]
Bolt circle diameter (BC)
37 - 72
Shaft diameter
72 - 107
5 - 16
Shaft length
20 - 41
Pilot diameter
16 - 54
Pilot length
16 - 85
max. 4
Weight of Unit [kg]
1.853 + (S [mm] × 0.0052)
A1: grease port A2: M6 thread, max. depth 30 mm A3: no thread
A4: male threaded rod end shown, see ordering key and accessories for information on all available ends.
A5: side of cover tube for mounting of sensors. A6: distance to center of coupling tightening hole.
Dimensions
Dimensions for Parallel Style with RediMount Motor Flange
Projection
METRIC
RediMount Flange Motor Dimensions Compatibility
Motor data
Flange C [mm] Flange D [mm]
Bolt circle diameter (BC)
5 - 16
Shaft length
15 - 41
16 - 64
Pilot length
Flange D
85 - 107
Shaft diameter
Pilot diameter
Flange C
26 - 85
16 - 85
max. 4
Motor square/diameter
max. 90.5
Weight of Unit [kg]
2.318 + (S [mm] × 0.0052)
A1: grease port
A2: M6 thread, max. depth 30 mm A3: no thread
A4: male threaded rod end shown, see ordering key and accessories for information on all available ends.
A5: side of cover tube for mounting of sensors.
www.thomsonlinear.com
15
Accessories
Male Threaded Rod End
Female Threaded Rod End
The male threaded rod end comes mounted from the factory if
the ordering code states that the unit shall be equipped with
one.
A
B
PC25
22
M10 × 1.25
PC32
22
PC40
26
The female threaded rod end comes mounted from the factory
if the ordering code states that the unit shall be equipped with
one.
A
B
PC25
15
M10 × 1.25
M10 × 1.25
PC32
15
M10 × 1.25
M12 × 1.25
PC40
18
M12 × 1.25
Spherical Joint
The spherical joint comes mounted from
the factory if the ordering code states
that the unit shall be equipped with one,
but it can also be ordered as a separate
part using the part number. To be able
to mount a separate spherical joint the
extension tube must be equipped with a
male threaded rod end.
A (REF.) *
B (REF.) *
C
D (Ø)
E (H9)
F
G
H
p/n
PC25
50
64
28
10
10.5
14
19
17
D607 406
PC32
50
64
28
10
10.5
14
19
17
D607 407
PC40
58
74
32
12
12
16
22
19
D607 408
* assuming 2 mm gap from jam nut to shoulder.
16
www.thomsonlinear.com
PC-Series™ Precision Linear Actuators
Accessories
Front Clevis
The front clevis comes mounted from
the factory if the ordering code states
that the unit shall be equipped with one,
but it can also be ordered as a separate
part using the part number. To be able
to mount a separate front clevis the
extension tube must be equipped with a
male threaded rod end.
A (REF.) *
B (REF.) *
C
D (Ø h11)
E (B11)
F
p/n
PC25
47
59
20
10
10
20
D607 409
PC32
47
59
20
10
10
20
D607 410
PC40
56
70
24
12
12
24
D607 411
* assuming 2 mm gap from jam nut to shoulder.
Rear Clevis for PC25 Parallel Style Actuators
The rear clevis consists of a bracket and
comes mounted from the factory if the
ordering code states that the unit shall
be equipped with one. It can also be
ordered as a separate part (all necessary
actuator attachment screws are included)
using the part number.
PC25
A
B
C
D
E (Ø H9)
F
G
H (h14)
I
p/n
36
45
92
51
8
64
72
16
38
D607 412
www.thomsonlinear.com
17
Accessories
Rear Clevis for PC32 and PC40 Parallel Style Actuators
The rear clevis consists of a bracket and
comes mounted from the factory if the
ordering code states that the unit shall
be equipped with one. It can also be
ordered as a separate part using the part
number in which case it is delivered with
the necessary screws to attach it to the
actuator.
A
B
C
D
E (Ø H9)
F
G
H (H14)
I
p/n
PC32
35,5
60
117
64,5
10
65.5
75,5
26
45
D607 413
PC40
42,5
70
136
73,5
12
75.5
88
28
52
D607 414
Front Mounting Plate
The front mounting plate consists of
a plate and comes mounted from the
factory if the ordering code states that
the unit shall be equipped with one. It
can also be ordered as a separate part
using the part number in which case it is
delivered with the necessary screws to
attach it to the actuator.
A
B
C
D
E
F
p/n
PC25
60
10
6.6 (2×)
-
40
76
D607 415
PC32
64
10
7.0 (4×)
32
45
80
D607 416
PC40
72
10
9.0 (4×)
36
52
90
D607 417
18
www.thomsonlinear.com
PC-Series™ Precision Linear Actuators
Accessories
Foot Mount for Inline Style Actuators
The foot mount consists of a front and
rear bracket and comes mounted from
the factory if the ordering code states
that the unit shall be equipped with one.
It can also be ordered as a separate
part (all necessary actuator attachment
screws are included) using the part
number.
A (JS15)
B
C
D
E
F
G
H
I
J
K
L
p/n
PC25
30
26
52
37
6.6
6.6
16
64
15
22
8.5
28
D607 418
PC32
32
32
65
45
6.6
6.6
24
78
15
35
8.5
35
D607 419
PC40
36
36
70
52
9
6.6
28
85
15
36
8.5
38.5
D607 420
Foot Mount for Parallel Style Actuators
The foot mount consists of a front and
rear bracket and comes mounted from
the factory if the ordering code states
that the unit shall be equipped with one.
It can also be ordered as a separate
part (all necessary actuator attachment
screws are included) using the part
number.
A
B
C
D
E
F
G
H
p/n
PC25
30
26
26
37
6,6
16
16
40
D607 421
PC32
32
32
32
45
6,6
24
24
45
D607 422
PC40
36
36
52
52
9
28
28
52
D607 423
www.thomsonlinear.com
19
Accessories
Fixed Front Trunnion / Fixed Rear Trunnion Parallel Style Actuators
Front trunnion
The fixed front and rear trunnions consist
of a plate with two shafts and come
mounted from the factory if the ordering
code states that the unit shall be equipped
with one. They can also be ordered as
a separate parts (all necessary actuator
attachment screws are included) using the
part numbers. The rear trunnion can only
be mounted on to the belt gear on parallel
style actuators.
Rear trunnion
A (REF.)
B (h14)
C (h14)
D (e9)
p/n
E
Front
Rear
PC25
66
42
12
12
14
D607 424
D607 433
PC32
74
50
12
12
14
D607 425
D607 434
PC40
95
63
16
16
19
D607 426
D607 435
Movable Cover tube Trunnion
The movable trunnion consists of two clamp
units that each have a shaft. The two clamp
units are put around the profile of the unit
at desired position and joined and locked
in place by the lock screws. The movable
trunnion comes mounted from the factory
if the ordering code states that the unit
shall be equipped with one. It can also be
ordered as a separate part (all necessary
actuator attachment screws are included)
using the part number.
A
B
C (h14)
D (Ø e9)
E
F (h14)
p/n
PC25
45
51
45
12
19
12
D607 427
PC32
74
65
50
12
25
12
D607 428
PC40
95
75
63
16
28
16
D607 429
20
www.thomsonlinear.com
PC-Series™ Precision Linear Actuators
Accessories
Sensor Bracket
The bracket can be installed over the left or right corner of the
cover tube surface under which the sensor magnet travels.
The bracket comes with all necessary items to mount it to the
actuator. Sensors are supplied separately, see list for available
suitable sensors.
A (REF.)
B (h14)
C (h14)
D (e9)
E
F
p/n
PC25
12.5
8
8
5
31
7.4
D607 430
PC32
12.5
8
8
5
31
7.4
D607 431
PC40
12.5
8
8
5
31
7.4
D607 432
Sensors for Sensor Bracket
Sensor
Solid state N.O.
brown
blue
black
Connector
Solid state N.C.
brown
blue
black
1
3
4
1
3
4
Reed switch N.0.
+ VDC
1
brown
L1 / + VDC
- VDC
output
4
blue
N / - VDC
Connector
4
+ VDC
1
- VDC
3
output
Solid State Sensor
Solid State Sensor
Solid State Sensor
Reed Switch Sensor
Contact type
normally open (N.O.)
normally closed (N.C.)
normally open (N.O.)
normally open (N.O.)
Output type
PNP
PNP
NPN
potential free contact
10 - 30 / -
10 - 30 / -
10 - 30 / -
5 -120 / 5 -120
[mA]
100
100
100
100
[°C]
- 25 to + 85
- 25 to + 85
- 25 to + 85
- 25 to + 70
Voltage
[VDC/AC]
Max. current
Operating temperature
Lead cross section
[mm ]
3 × 0.14
3 × 0.14
3 × 0.14
2 × 0.14
Length (L)
[mm]
25.3
25.3
25.3
30.5
IP 67
IP 67
IP 67
IP 67
Protection class
Connection
p/n
2
flying leads
0.3 m PUR
cable with
connector
flying leads
0.3 m PUR
cable with
connector
flying leads
0.3 m PUR
cable with
connector
flying leads
0.3 m PUR
cable with
connector
D607 362
D607 363
D607 366
D607 367
D607 365
D607 364
D607 368
D607 369
Sensor Extension Cable With Connector
Type
PUR cable with M8 connector and flying leads (suits all above sensors with connector)
www.thomsonlinear.com
Length
p/n
10 m
D607 370
21
How To Order
The PC-Series™ ordering key provides a quick overview of the product versions available. It is
important to consider many details of your application when selecting a product, including the
loads and speeds required as well as the product environment and necessary accessories. Use
our online selection tool at www.thomsonlinear.com/pcseries or contact us for further support.
Ordering Key
1
2
3
4
5
6
7
8
9
PC
25
LX
423
B10–
0270
M
J
1
1. Actuator type
PC = PC-Series precision linear actuator
6. Stroke length (S max)
0000 – 9999 = distance in mm
2. Size
25 = profile size 34 × 34 mm
32 = profile size 45 × 45 mm
40 = profile size 55 × 55 mm
7. Cylinder mounting
R = rear trunnion (fixed, mounted on belt gear)
C = rear clevis
F = feet kit
M = trunnion (movable)
T = front trunnion (fixed, mounted on front housing)
P = front mounting plate
X = without any cylinder mounting
3. Transmission type
SX = inline style, directly coupled, no RediMount flange
LX = inline style, directly coupled, RediMount flange
PA = parallel style, 1:1 belt gear in standard position
4. RediMount motor ID (1)
000 – 998 = code for suitable flange when customers choice of motor is known
999 = code used when customers choice of motor is unknown
XXX = code used when unit has no RediMount flange. (2)
5. Screw type and lead
B03– = ball screw, 3 mm lead (possible for PC25 only)
B04– = ball screw, 4 mm lead (possible for PC32 only)
B05– = ball screw, 5 mm lead (possible for PC40 only)
B10– = ball screw, 10 mm lead (possible for all sizes)
B20– = ball screw, 20 mm lead (possible for PC40 only)
8. Rod end
M = male thread (standard)
F = female thread
J = spherical joint
C = front clevis
9. Environmental
1 = IP65 rating (standard)
(1) See section “RediMount™ Selection” below.
(2) Always use XXX in combination with transmission type SX.
RediMount™ Selection
These are the key dimensions you need to know to
be able to define the RediMount code and flange
size for your choice of motor and PC-Series actuator.
1. Motor shaft diameter
2. Motor shaft length
3. Mounting flange thickness
4. Motor square/diameter size
5. Mounting bolt thru hole diameter
6. Motor pilot diameter
7. Mounting bolt circle
22
Let our online RediMount selection tool assist you!
www.thomsonlinear.com/pcseries
www.thomsonlinear.com
PC-Series™ Precision Linear Actuators
Online Sizing, Selection and Design Tools
Thomson offer a wide variety of online application, selection, and training tools to help you in the
selection process. Together, with our direct contact customer support center, we can help you find
the PC-Series™ actuator model that best fits your application needs. Visit www.thomsonlinear.com/
pcseries for additional online information.
Product Selector
The product selector will walk you through the
selection process.
www.thomsonlinear.com/pcseries
Interactive 3D CAD Models
Download interactive 3D CAD models in the most
common CAD formats for free.
www.thomsonlinear.com/pcseries
PC-Series™ Microsite
Get additional information and learn more about
the electromechanical advantage on our microsite.
www.thomsonlinear.com/conversion
Energy Cost Estimator
See how much you could save by switching from
pneumatics cylinders.
www.thomsonlinear.com/pc_calc
www.thomsonlinear.com
23
USA, CANADA and MEXICO
Thomson
203A West Rock Road
Radford, VA 24141, USA
Phone: 1-540-633-3549
Fax: 1-540-633-0294
E-mail: [email protected]
Literature: literature.thomsonlinear.com
EUROPE
United Kingdom
Thomson
Phone: +44 (0) 1271 334 500
Fax: +44 (0) 1271 334 501
E-mail: [email protected]
Germany
Thomson
Nürtinger Straße 70
72649 Wolfschlugen
Phone: +49 (0) 7022 504 0
Fax: +49 (0) 7022 504 405
E-mail: [email protected]
France
Thomson
Phone: +33 (0) 243 50 03 30
Fax: +33 (0) 243 50 03 39
E-mail: [email protected]
Italy
Thomson
Largo Brughetti
20030 Bovisio Masciago
Phone: +39 0362 594260
Fax: +39 0362 594263
E-mail: [email protected]
Spain
Thomson
Rbla Badal, 29-31 7th, 1st
08014 Barcelona
Phone: +34 (0) 9329 80278
Fax: + 34 (0) 9329 80278
E-mail: [email protected]
Sweden
Thomson
Estridsväg 10
29109 Kristianstad
Phone: +46 (0) 44 24 67 00
Fax: +46 (0) 44 24 40 85
E-mail: [email protected]
www.thomsonlinear.com
PC_Series_Precision_Linear_Actuators_BREN0005-02A | 20140310TJ
Specifications are subject to change without notice. It is the responsibility of the product user to determine the suitability of
this product for a specific application. All trademarks property of their respective owners. © Thomson Industries, Inc. 2014
ASIA
Asia Pacific
Thomson
750, Oasis, Chai Chee Road,
#03-20, Technopark @ Chai Chee,
Singapore 469000
E-mail: [email protected]
China
Thomson
Rm 2205, Scitech Tower
22 Jianguomen Wai Street
Beijing 100004
Phone: +86 400 6661 802
Fax: +86 10 6515 0263
E-mail: [email protected]
India
Thomson
1001, Sigma Building
Hiranandani Business Park
Powai , Mumbai – 400076
Phone: +91 22 422 70 300
Fax: +91 22 422 70 338
E-mail: [email protected]
Japan
Thomson
Minami-Kaneden 2-12-23, Suita
Osaka 564-0044 Japan
Phone: +81-6-6386-8001
Fax: +81-6-6386-5022
E-mail: [email protected]
Korea
Thomson
F12 Ilsong Bldg, 157-37
Samsung-dong, Kangnam-gu,
Seoul, Korea (135-090)
Phone: +82 2 6917 5049
Fax: +82 2 6917 5007
E-mail: [email protected]
SOUTH AMERICA
Thomson
Sao Paulo, SP Brazil
Phone: +55 11 3879-6600
Fax: +55 11 3879 6656
E-mail: [email protected]