Download Report

UK M anufacturers of High Qualit y
Ar chitectural Tension Systems
Sta inl es s S te e l Ar c hi te ctu r al
Ten sion S y s te m s
www.petersen-structural.co.uk
introduction/capabilities
Modern de velopments in construction technology have focused
on the production of light, sturdy structures. Tension member
braced structures are a ke y part of modern construction and can
be e xpected to further increase in rele vance.
Petersen have been supplying the architectural structures and tensile fabric markets for over 25 years
with high-quality, UK manufactured terminals, tensioners, structural cable systems and tension bar
systems. During this time we have been at the forefront of developing and manufacturing stainless
steel tension member systems.
We have supplied products integral to many prestigious structures around the world. As a manufacturer
Petersenare able to provide custom solutions to projects, adaptation of product with a fast and flexible
approach assured by our ISO9001:2008 and AS9100-C certified quality system. Full traceability and
certification from the steel mill to the construction site is provided as standard. All of our fittings are
manufactured from solid bar ensuring their structural integrity - no welding or casting.
01
cable systems
cable systems
Structural Cable Systems allow a reduction in diameter from traditional steelwork, minimising
visual impact of supportive structures and maximising light and space within the building.
cable tension members
Cable Tension Members are typically used to span long distances or in applications where the bend in
the cable is used to provide tension to whatever is attached along its length - for example Catenary
Cable Systems, Bow Truss/Bow Strut Glass Supports, Cable Net Structures and Tensile Fabric Structures.
We do all of our manufacturing in-house so we have the ability to design and make specific parts to
project requirements from a wide range of materials; Stainless Steels (including Duplex and PrecipitationHardening), Aluminium Bronze, Nitronic, Aluminium and Titanium. We can provide parts with a wide
range of specialised coatings for specific site conditions including anodizing, PVD, galvanising and
Xylan (Teflon).
Manufacturing takes place at the Petersen Stainless Rigging factory in Blaydon, England where the
Quality Management System is certified by Lloyd’s Register to ISO9001:2008 and to the Aircraft Industry
Standard AS9100 rev C the scope of which covers all activities including design and manufacture.
Sta inl e s s Ste e l A r c hi te ctu r a l Te n sion S y s t em s 02
System C1 swage studs
Can be supplied with either RH threads both ends or LH and RH thread combination depending upon the application. Imperial Unf threads
are also available.
Adjustment range is the maximum range of adjustment. Cable lengths will be calculated with 1/3rd engagement allowing 2/3rd for
shortening the length. E.g. C5-5mm would have approximate adjustment range of +33mm - 66mm.
PRODUCT
CODE
W DIAMETER
CBL(KN) MBL *9
MBL
THREAD
DIAMETER
OD
STUD LENGTH
THREAD LENGTH
EACH END
C1-3mm
3mm
6.678
7.42
M6
6.3mm
97mm
47mm
C1-4mm
4mm
11.88
13.2
M6
7.5mm
105mm
47mm
C1-4mm M8
4mm
11.88
13.2
M8
7.5mm
113mm
54mm
C1-5mm
5mm
18.54
20.6
M8
9.1mm
122mm
54mm
C1-5mm M10
5mm
18.54
20.6
M10
9.1mm
135mm
68mm
C1-6mm
6mm
26.73
29.7
M10
12.5mm
154mm
75mm
C1-6mm M12
6mm
26.73
29.7
M12
12.5mm
170mm
90mm
C1-7mm
7mm
34.02
37.8
M12
14.3mm
177mm
90mm
C1-8mm
8mm
44.46
49.4
M12
16.0mm
190mm
90mm
C1-8mm M16
8mm
44.46
49.4
M16
16.0mm
201mm
100mm
C1-10mm
10mm
69.48
77.2
M16
18.omm
223mm
100mm
C1-12mm
12mm
93.6
104
M20
21.4mm
277mm
120mm
C1-14mm
14mm
125.1
139
M22
25.0mm
325mm
140mm
C1-16mm
16mm
162.9
181
M27
28.2mm
371mm
160mm
P = Pin diameter. C = Fork depth from pin centre. T = Throat width
03
System C2
symmetrical adjustment forks
Adjustment range is the maximum range of adjustment. Cable
lengths will be calculated with 1/3rd engagement allowing 2/3rd for
shortening the length. E.g. C2-5mm would have approproximate
adjustment range of +32mm - 64mm.
PRODUCT
CODE
W Dia
CBL(KN) MBL *9
MBL
PIN
TH Dia.
C
T
FORK
LENGTH
ADJUSTMENT
RANGE
C2-3mm
3mm
6.678
7.42
6.4mm
6.3mm
15mm
7mm
55
48mm
C2-4mm
4mm
11.88
13.2
8mm
7.9mm
16mm
7.9mm
70
64mm
C2-5mm
5mm
18.54
20.6
9.5mm
9.1mm
19mm
9.5mm
88
80mm
C2-6DS
6mm
26.73
29.7
9.5mm
9.1mm
19mm
9.5mm
88
80mm
C2-6mm
6mm
26.73
29.7
11mm
12.5mm
22mm
10.9mm
98
88mm
C2-7mm
7mm
34.02
37.8
13mm
14.3mm
30mm
12.7mm
120
96mm
C2-8DS
8mm
44.46
49.4
13mm
16.0mm
30mm
12.7mm
120
96mm
C2-8mm
8mm
44.46
49.4
16mm
16.0mm
32mm
15.8mm
142
128mm
C2-10mm
10mm
69.48
77.2
16mm
18.0mm
32mm
15.8mm
142
128mm
C2-12mm
12mm
93.6
104
19mm
21.4mm
38mm
19mm
160
142mm
C2-14mm
14mm
125.1
139
22.2mm
25.0mm
45mm
22.2mm
179
160mm
C2-16mm
16mm
162.9
181
25.4mm
28.2mm
50mm
25mm
207
180mm
C2-19mm
19mm
209.7
233
28.4mm
34.5mm
58mm
28.4mm
231
200m
C2-22mm
22mm
269.1
299
32mm
40.3mm
64mm
32mm
252
220mm
C2-26mm
26mm
374.4
416
35mm
45.9mm
70mm
34.9mm
278
240mm
Petersen Structural Rigging Limited, 29 Harley Close, Worksop, Nottinghamshire, S80 3BF
t: + 44 (0) 1909 500 694 f: +44 (0) 1909 500 694 e: [email protected] www.petersen-structural.co.uk
System C3 compact tensioner assembly
PRODUCT
CODE
W Dia
CBL(KN) MBL *9
MBL
PIN
OD
L
ADJUSTMENT
RANGE
C3-3mm
3mm
6.678
7.42
6mm
12.5mm
6mm
100mm
C3-4mm
4mm
11.88
13.2
8mm
17mm
8mm
140mm
C3-5mm
5mm
18.54
20.6
10mm
19mm
10mm
160mm
C3-6mm
6mm
26.73
29.7
11mm
22mm
11mm
180mm
C3-7mm
7mm
34.02
37.8
12mm
25mm
12mm
220mm
C3-8mm
8mm
44.46
49.4
14mm
28mm
14mm
240mm
C3-10mm
10mm
69.48
77.2
16mm
32mm
16mm
260mm
C3-12m
12mm
93.6
104
19mm
38mm
19mm
280mm
C3-14mm
14mm
125.1
139
22mm
45mm
22mm
320mm
C3-16mm
16mm
162.9
181
25mm
50mm
25mm
380mm
C3-19mm
19mm
209.7
233
28mm
58mm
28mm
440mm
C3-22mm
22mm
269.1
299
32mm
64mm
32mm
480mm
C3-26mm
26mm
374.4
416
35mm
70mm
35mm
520mm
P = Pin diameter. C = Fork depth from pin centre. T = Throat width
05
System C4 swage fork and swage fork tensioner
Adjustment range is the maximum range of adjustment. Cable lengths will be calculated with 1/3rd engagement allowing 2/3rd for
shortening the length. E.g. C4-5mm would have approximate adjustment range of +33mm - 66mm.
PRODUCT
CODE
W Dia
CBL(KN) MBL *9
MBL
PIN
TH Dia.
C
T
MIN L
MAX L
C4-3mm
3mm
6.678
7.42
6mm
6.3mm
12.5mm
6.2mm
125mm
195mm
C4-4mm
4mm
11.88
13.2
8mm
7.9mm
17mm
7.9mm
150mm
228mm
C4-5DS
5mm
18.54
20.6
8mm
7.9mm
17mm
7.9mm
15300
231mm
C4-5mm
5mm
18.54
20.6
9.5mm
9.1mm
19mm
9.9mm
184mm
284mm
C4-6DS
6mm
26.73
29.7
9.5mm
9.1mm
19mm
9.9mm
187mm
287mm
C4-6mm
6mm
26.73
29.7
11mm
11.1mm
22mm
10.9mm
202mm
310mm
C4-7mm
7mm
34.02
37.8
12mm
12.7mm
25mm
12.7mm
236mm
368mm
C8-8DS
8mm
44.46
49.4
12mm
12.7mm
25mm
12.7mm
239mm
371mm
C8-8mm
8mm
44.46
49.4
14mm
15.9mm
28mm
15.8mm
300mm
455mm
C4-10mm
10mm
69.48
77.2
16mm
15.9mm
32mm
15.8mm
312mm
468mm
C4-12mm
12mm
93.6
104
19mm
19mm
38mm
17.8mm
361mm
532mm
c4-14mm
14mm
125.1
139
22mm
22.2mm
45mm
22mm
403mm
600mm
C4-16mm
16mm
162.9
181
25.4mm
25.4mm
50mm
25mm
472mm
711mm
C4-19mm
19mm
209.7
233
28mm
28.6mm
58mm
28.5mm
531mm
801mm
C4-22mm
22mm
269.1
299
32mm
31.8mm
64mm
31.8mm
575mm
859mm
C4-26mm
26mm
374.4
416
35mm
34.9mm
70mm
34.9mm
655mm
979mm
P = Pin diameter. C = Fork depth from pin centre. T = Throat width
Sta inl e s s Ste e l A r c hi te ctu r a l Te n sion S y s t em s 06
System C5 toggle fork and swage toggle tensioner
Adjustment range is the maximum range of adjustment. Cable lengths will be calculated with 1/3rd engagement allowing 2/3rd for
shortening the length. E.g. C5-5mm would have approximate adjustment range of +33mm - 66mm.
PRODUCT
CODE
W Dia
CBL(KN) MBL *9
MBL
W
P
C
T
ADJUSTMENT
RANGE
C5-3mm
3mm
6.678
7.42
3mm
6.0mm
14mm
8mm
70mm
C5-4mm
4mm
11.88
13.2
4mm
8mm
18mm
9mm
78mm
C5-5mm
5mm
18.54
20.6
5mm
9.5mm
21mm
11mm
78mm
C5-6mm
6mm
26.73
29.7
6mm
11mm
25mm
13mm
100mm
C5-7mm
7mm
34.02
37.8
7mm
12mm
27mm
15mm
132mm
C5-8DS
8mm
44.46
49.4
8mm
12mm
27mm
15mm
132mm
C5-8mm
8mm
44.46
49.4
8mm
12mm
27mm
15mm
155mm
C5-10mm
10mm
69.48
77.2
10mm
16mm
36mm
19mm
156mm
C5-12mm
12mm
93.6
104
12mm
19mm
45mm
22mm
171mm
C5-14mm
14mm
125.1
139
14mm
22mm
53mm
25mm
197mm
C5-16mm
16mm
162.9
181
16mm
25.4mm
62mm
28mm
239mm
C5-19mm
19mm
209.7
233
19mm
28mm
63mm
32mm
270mm
C5-22mm
22mm
269.1
299
22mm
32mm
76mm
35mm
284mm
C5-26mm
26mm
374.4
416
26mm
35mm
92mm
38mm
324mm
P = Pin diameter. C = Fork depth from pin centre. T = Throat width
07
System C6 swage fork each end
Fixed length tendon. Suitable for applications where the cable is tensioning by either movement in the supporting structure or from
supporting a vertical load. Please note cable fabrication tolerance of +/- 3mm
PRODUCT
CODE
W Dia
CBL(KN) MBL *9
MBL
PIN
D
C
T
C6-3mm
3mm
6.678
7.42
6mm
6.3mm
12.5mm
6.2mm
C6-4mm
4mm
11.88
13.2
8mm
7.5mm
17mm
7.9mm
C6-5DS
5mm
18.54
20.6
9.5mm
9.1mm
19mm
9.9mm
C6-5mm
5mm
18.54
20.6
11mm
12.5mm
22mm
10.9mm
C6-DS
6mm
26.73
29.7
11mm
12.5mm
22mm
10.9mm
C6-6mm
6mm
26.73
29.7
11mm
12.5mm
22mm
10.9mm
C6-7mm
7mm
34.02
37.8
12mm
14.3mm
25mm
12.7mm
C6-8DS
8mm
44.46
49.4
12mm
16.0mm
25mm
12.7mm
C6-8mm
8mm
44.46
49.4
14mm
16.0mm
28mm
13.8mm
C6-10mm
10mm
69.48
77.2
16mm
18.0mm
32mm
15.8mm
C6-12mm
12mm
93.6
104
19mm
21.4mm
38mm
17.8mm
C6-14mm
14mm
125.1
139
22mm
25.0mm
45mm
22mm
C6-16mm
16mm
162.9
181
25.4mm
28.2mm
50mm
25mm
C6-19mm
19mm
209.7
233
28mm
34.5mm
58mm
28.2mm
C6-22mm
22mm
269.1
299
32mm
40.3mm
64mm
31.8mm
C6-26mm
26mm
374.4
416
35mm
45.9mm
70mm
34.8mm
P = Pin diameter. C = Fork depth from pin centre. T = Throat width
Sta inl e s s Ste e l A r c hi te ctu r a l Te n sion S y s t em s 08
System c7 symmetrical assembly swage
fork each end and in-line tensioner
Adjustment range is the maximum range of adjustment. Cable lengths will be calculated with 1/3rd engagement allowing 2/3rd for
shortening the length. E.g. C7-5mm would have approproximate adjustment range of +33mm - 66mm.
PRODUCT
CODE
W Dia
CBL(KN) MBL *9
MBL
PIN
TH Dia.
C
T
MIN L
MAX L
ADJUSTMENT
RANGE
C7-3mm
3mm
6.678
7.42
6mm
6.3mm
12.5mm
6.2mm
116mm
186mm
70mm
C7-4mm
4mm
18.54
13.2
8mm
7.9mm
17mm
7.9mm
136mm
214mm
78mm
C7-5DS
5mm
18.54
20.6
8mm
7.9mm
17mm
7.9mm
142mm
220mm
78mm
C7-5mm
5mm
26.73
20.6
9.5mm
9.1mm
19mm
9.9mm
167mm
267mm
100mm
C7-6DS
6mm
34.02
29.7
9.5mm
9.1mm
19mm
9.9mm
173mm
273mm
100mm
C7-6mm
6mm
26.73
29.7
11mm
11.1mm
22mm
10.9mm
182mm
290mm
108mm
C7-7mm
7mm
44.46
37.8
12mm
12.7mm
25mm
12.7mm
214mm
346mm
132mm
C7-8DS
8mm
44.46
49.4
12mm
12.7mm
25mm
12.7mm
220mm
352mm
132mm
C7-8mm
8mm
44.46
49.4
14mm
15.9mm
28mm
15.8mm
274mm
430mm
155mm
C7-10mm
10mm
69.48
77.2
16mm
15.9mm
32mm
15.8mm
278mm
434mm
156mm
C7-12mm
12mm
93.6
104
19mm
19mm
38mm
17.8mm
322mm
493mm
171mm
C7-14mm
14mm
125.1
139
22mm
22.2mm
45mm
22mm
362mm
559mm
197mm
C7-16mm
16mm
162.9
181
25.4mm
25.4mm
50mm
22mm
426mm
665mm
239mm
C7-19mm
19mm
209.7
233
28mm
28.6mm
58mm
28.2mm
476mm
746mm
270mm
C7-22
22mm
269.1
299
32mm
31.8mm
64mm
31.8mm
515mm
800mm
284mm
C7-26
26mm
374.4
416
35mm
34.9mm
70mm
34.9mm
594mm
918mm
324mm
P = Pin diameter. C = Fork depth from pin centre. T = Throat width
09
System C8 compression fork and
compression fork tensioner
Adjustment range is the maximum range of adjustment. Cable lengths will be calculated with 1/3rd engagement allowing 2/3rd
for shortening the length. E.g. C8mm would have approximate adjustment range of +33mm - 66mm.
PRODUCT
CODE
W Dia
CBL(KN) MBL *9
MBL
PIN
TH Dia.
C
T
MIN L
MAX L
ADJUSTMENT
RANGE
C8-3mm
3mm
6.678
7.42
6mm
6.3mm
12.5mm
6.2mm
125mm
195mm
70mm
C8-4mm
4mm
18.54
13.2
8mm
7.9mm
17mm
7.9mm
150mm
228mm
78mm
C8-5DS
5mm
18.54
20.6
8mm
7.9mm
17mm
7.9mm
153mm
231mm
78mm
C8-5mm
5mm
26.73
20.6
9.5mm
9.1mm
19mm
9.9mm
184mm
284mm
100mm
C8-6DS
6mm
34.02
29.7
9.5mm
9.1mm
19mm
9.9mm
187mm
287mm
100mm
C8-6mm
6mm
26.73
29.7
11mm
11.1mm
22mm
10.9mm
202mm
310mm
108mm
C8-7mm
7mm
44.46
37.8
12mm
12.7mm
25mm
12.7mm
236mm
368mm
132mm
C8-8DS
8mm
44.46
49.4
12mm
12.7mm
25mm
12.7mm
239mm
371mm
132mm
C8-8mm
8mm
44.46
49.4
14mm
15.9mm
28mm
15.8mm
300mm
455mm
155mm
C8-10mm
10mm
69.48
77.2
16mm
15.9mm
32mm
15.8mm
312mm
468mm
156mm
C8-12mm
12mm
93.6
104
19mm
19mm
38mm
17.8mm
361mm
532mm
171mm
C8-14mm
14mm
125.1
139
22mm
22.2mm
45mm
22mm
403mm
600mm
197mm
C8-16mm
16mm
162.9
181
25.4mm
25.4mm
50mm
22mm
472mm
711mm
239mm
C8-19mm
19mm
209.7
233
28mm
28.6mm
58mm
28.2mm
531mm
801mm
270mm
C8-22mm
22mm
269.1
299
32mm
31.8mm
64mm
31.8mm
575mm
859mm
284mm
C8-26mm
26mm
374.4
416
35mm
34.9mm
70mm
34.9mm
655mm
979mm
324mm
Compression/swageless terminals can be assembled on site safely and securely without the need for special tools.
Compression terminals are suited to applications where the exact final length are to determine or where the cable is designed to pass
through intermediate steelwork such as balustrade posts or Solar shading screens.
Sta inl e s s Ste e l A r c hi te ctu r a l Te n sion S y s t em s 10
TENSION BAR SYSTEMS
TENSION BAR SYSTEMS are used in lightweight structures where
high stiffness tension members are required.
Our standard 316 Tension Bar systems consist of a threaded stainless steel bar terminated with
SBS-450 fork clevis adjusters at each end which allow a generous amount of adjustment. The
SBS-450 fork clevis ends and double head clevis pins are designed in accordance with BS5950-1:2000,
EN 1993-1-11:2006 and EN 1993-1-8:2005 and are machined - not cast - from a high-strength duplex
stainless steel. The tension bar system is normally supplied with one left hand and one right hand
threaded end. After installation the Tension Bar can be rotated to set the correct length and locked
using tapered lock cover nuts.
316 Tension Bars are manufactured from specially drawn bar-stock with rolled threads. Tension Bar
systems are available in up to 6m single lengths, couplers can be used to span further.
About Nitronic 50 Rod:
The Petersen rod system offers a hybrid solution combining the benefits of stainless steel cable and
solid bar. Size for size rod is stronger than cable and has much lower stretch. The tensile strength of
rod is almost double that of 316 bar allowing for a huge reduction in self-weight and visual impact.
Rod can also be supplied in virtually any length and can be coiled for ease of transport. Rod can
be bent round fixed points on structures such as bow-struts reducing the steelwork required. The
combination of its low-profile and high strength makes rod the lightest and most elegant solution
available for the support of large glazed areas and other modern structures.
In architectural rigging, ‘bar’ is the name given to a solid tendon of 316 stainless which would normally
be terminated by a threaded fork end. ‘Rod’ is the term in rigging used to describe a solid tendon
of high-strength Nitronic 50 alloy stainless steel. This alloy was developed for performance rigging
applications to meet the demands for steel with high tensile strength and better corrosion resistance
than 316.
Rod systems have been installed on a number of notable structures over the past 20 years allowing
architects to create very fine structures which maximise light and space.
Attaching the Fittings:
Petersen rods are terminated by using hydraulic pressure to form a head which sits inside a special
‘seat’ in the fitting. The process of forming the head is called ‘cold heading’ and results in a
termination as strong as the rod itself.
Although the relation of the head and seat geometry must be very tightly controlled we can form
seats in a wide variety of different end fittings making the Petersen rod system the most versatile
in the market.
11
Assembly b1
The System
Tension Bars, also known as Tension Rods, Tie Bars and Tie Rods,
are manufactured in the UK by Petersen.
Tension Bar systems consist of a threaded stainless steel tie terminated with
an SBS-450 fork clevis adjuster at each end. The SBS-450 fork and clevis pins
are designed in accordance with BS5950-1:2000, EN 1993-1-11:2006 and
EN 1993-1-8:2005 and are machined - not cast - from a high-strength duplex
stainless steel.
The SBS-450 fork clevis ends allow a generous amount of adjustment
and are normally supplied in pairs with one left hand and one right hand
threaded end. After installation the Tension Bar can be rotated to set the
correct length and locked into position using tapered lock cover nuts.
316 Tension Bars are manufactured from specially drawn high-tensile
bar-stock with rolled threads. Tension Bar systems are available in up to
6m single lengths and couplers can be used to span further.
ADJ = Total adjustment
PART
CODE
THREAD
(METRIC)
PIN (P)
T
C
F
ADJ (+ / -)
OD
L
0.2% kN*
UTS kN*
B1-M10
M10 X 1.50
10mm
10mm
20mm
11.2mm
20mm
25mm
68.7mm
26.1
40.6
B1-M12
M12 X 1.75
12mm
12mm
24mm
13.8mm
24mm
32mm
82.8mm
37.8
58.8
B1-M16
M16 x 2.00
16mm
15mm
32mm
18.4mm
32mm
40mm
109.9mm
70.7
109.9
B1-M20
M20 x 2.50
20mm
19mm
40mm
23.0mm
40mm
50mm
137.5mm
110.3
171.5
B1-M24
M24 x 3.00
24mm
24mm
48mm
27.6mm
48mm
60mm
165.6mm
158.9
247.1
B1-M27
M27 x 3.00
27mm
26mm
54mm
31.1mm
54mm
70mm
185.9mm
206.6
321.3
B1-M30
M30 x 3.50
30mm
29mm
60mm
34.5mm
60mm
75mm
206.5mm
252.6
392.7
B1-M33
M33 x 3.50
33mm
32mm
66mm
38.0mm
66mm
80mm
227.3mm
312.3
485.8
B1-M36
M36 x 4.00
36mm
34mm
72mm
41.4mm
72mm
90mm
247.4mm
376.7
571.9
B1-M39
M39 x 4.00
39mm
38mm
78mm
44.9mm
78mm
100mm
268.7mm
439.2
638.2
B1-M42
M42 x 4.50
42mm
40mm
84mm
48mm
168mm
100mm
289mm
504.5
784.7
ADJ = or - as standard set in mid position.
*Sizes above M39 also available - please contact us for further details. *in accordance with BS5950-1:2000 and EN 1993-1-8:2005
PIN CENTRE
SPECIFY LENGTH
PIN CENTRE
Technical data
The Hi-Mod SBS450 bars are manufactured from stainless steel grade 316 EN10088 1.4401/4 which offers higher corrosion resistance.
The pins are designed in accordance with BS 5950-1:2000 and EN 1993-1-8:2005. All components are produced in accordance with our
quality systems. Bar lengths are available up to 6m. Lengths exceeding 6m are also available by utilising a bar coupler. All accessories are
finished to a N4 standard (240 grit satin) other finishes are available on request. Bars are produced to a bright drawn finish. **NOTE**
If the forks are at maximum adjustment then half a diameter of thread will be visible are the Taper Nut has been fully tightened.
Modules of Elasticity 200N/mm2
Sta inl e s s Ste e l A r c hi te ctu r a l Te n sion S y s t em s 12
Assembly b2
PRODUCT CODE
ROD SIZE
D IN MM
MIN BL Kg
WEIGHt Kg/m
STRETCH MM/MM
1000Kg
NITRONIC50-04
-4
4.37
2130
0.118
0.003865
NITRONIC50-06
-6
5.03
2860
0.156
0.002916
NITRONIC50-08
-8
5.72
3720
0.202
0.002258
NITRONIC50-10
-10
6.35
4670
0.249
0.001829
NITRONIC50-12
-12
7.14
5670
0.314
0.001448
NITRONIC50-15
-15
7.52
6460
0.349
0.001305
NITRONIC50-17
-17
8.38
7940
0.434
0.001050
NITRONIC50-22
-22
9.53
10200
0.560
0.000813
NITRONIC50-30
-30
11.10
13600
0.761
0.000599
NITRONIC50-40
-40
11.10
17200
0.996
0.000457
NITRONIC50-48
-48
14.27
21800
1.258
0.000362
NITRONIC50-60
-60
16.76
27200
1.735
0.000262
13
Assembly b3
The System
The SBS-450 range of tie bars are manufactured from a high quality stainless steel
grade 316 with rolled threads to BS3643. Manufactured to order and available up
to 6m lengths. Longer lengths are available by using bar couplers.
SBS-450 Bars are generally used on :
Membrane Structures
Lightweight Steel Structures
Footbridges
Glass Facades
PART CODE
THREAD
(METRIC)
ULTIMATE STRESS
kN*
YIELD STRESS
kN*
STRESS AREA
mm2
2YIELD LOAD
kN*
ULTIMATE LOAD
kN*
SBM10
M10 X 1.50
700
450
58
26.1
40.6
SBM12
M12 X 1.75
700
450
54
37.8
58.8
SBM16
M16 x 2.00
700
450
157
70.7
109.9
SBM20
M20 x 2.50
700
450
245
110.3
171.5
SBM24
M24 x 3.00
700
450
353
158.9
247.1
SBM27
M27 x 3.00
700
450
459
206.6
321.3
SBM30
M30 x 3.50
700
450
561
252.6
392.7
SBM33
M33 x 3.50
700
450
694
312.3
485.8
SBM36
M36 x 4.00
700
450
817
367.7
571.9
SBM39
M39 x 4.00
700
450
976
439
638.2
*in accordance with BS5950-1:2000 and EN 1993-1-8:2005
Clevis pin
taper lock nut
PART CODE
L
OD
HD
C/S SCREW
PART CODE
TH
OD
L
C
BDHP10
25mm
10mm
12.7mm
M3 x 6
TLNM10
M10 x 1.50
15mm
17.0mm
3.5mm
BDHP12
32mm
12mm
14mm
M5 x 12
TLNM12
M12 x 1.75
19mm
20.4mm
3.5mm
BDHP16
40mm
16mm
19mm
M5 x 12
TLNM16
M16 x 2.00
25mm
27.2mm
3.5mm
BDHP20
50mm
20mm
24mm
M6 x 12
TLNM20
M20 x 2.50
30mm
34.0mm
3.5mm
BDHP24
60mm
24mm
28mm
M6 x 12
TLNM24
M24 x 3.00
36mm
40.8mm
4mm
BDHP27
70mm
27mm
32mm
M6 x 12
TLNM27
M27 x 3.00
42mm
45.9mm
4mm
BDHP30
75mm
30mm
35mm
M8 x 16
TLNM30
M30 x 3.50
45mm
51.0mm
4mm
BDHP33
80mm
33mm
38mm
M8 x 16
TLNM33
M33 x 3.50
48mm
56.1mm
5mm
BDHP36
90mm
36mm
42mm
M8 x 16
TLNM36
M36 x 4.00
54mm
61.2mm
5mm
BDHP39
100mm
39mm
45mm
M8 x 16
TLNM39
M39 x 4.00
60mm
66.3mm
5mm
Technical Data
The Hi-MOD SBS450 bars are manufactured from stainless steel grade 316 EN10088 1.4401/4 which offers higher corrosion resistance. The
pins are designed in accordance with BS 5950-1:2000 and EN 1993-1-8:2005. All components are produced at our manufacturing facility in
the North of the England using the latest technology in CNC equipment and produced in accordance with our quality systems . Bar lengths
are available up to 6m. Lengths exceeding 6m are also available by utilising a bar coupler. All accessories are finished to a N4 standard (240
grit satin). Bars are produced to a bright drawn finish. **NOTE** If the forks are at maximum adjustment then half a diameter of thread will
be visible after the Taper Nut has been fully tightened. Modulus of Elasticity 200N/mm²
Sta inl e s s Ste e l A r c hi te ctu r a l Te n sion S y s t em s 14
Contact Us
For more information on our architectural tension systems, please visit www.petersen-structural.co.uk
Alternatively call us on +44 (0)1909 500 694 or email [email protected]
Head Office
Petersen Structural Rigging Limited
Cowen Road, Blaydon on Tyne
Tyne & Wear, NE21 5TW
Scandinavia and Baltic Region
South-East Asia
Petersen Stainless Rigging AB
Gothenburg
Petersen Stainless SEA
Kuala Lumpur
t: +46 73-388 23 88
e: [email protected]
t: +60 18 322 9178
e: [email protected]
England
t: +44 (0)1909 500 694
f: +44 (0)1909 500 694
e:[email protected]