Presentation Switcher with Scaler UP-1200 ctsig_up-1200_db01_e/ 08-14/TCL / Copyright by COMM-TEC The UP-1200 is a seamless presentation switcher with an integrated scaler. 9 inputs for 5 different signal types can be switched to the outputs (1 HDMI and 1 HDBaseT output working in parallel). All input signals will be scaled to the user-defined output resolution. There are 9 inputs for unbalanced analog stereo audio, and one of these audio sources can be embedded with the video signal. Audio output can be delivered by HDMI and unbalanced audio output at the same time. Video and Audio can be switched as Audio-follows-Video or Break-Away. The switcher can be controlled via its front panel, by IR Remote, by On-Screen-Menu, by RS-232 or by LAN. Besides default EDID presets the switcher is able to read the EDID data from the sink on the HDMI output and use it instead of the EDID presets (EDID management). For conference room applications the switcher also has an integrated audio amplifier (2x 20 Watt @ 4 Ohm). Features Video inputs: • • • • • • 1 x Composite 1 x Component 2 x VGA 3 x HDMI (HDCP conform) 1 x DisplayPort 1 x HDbaseT Audio inputs: • 9 x unbalanced stereo Audio • 3 x Audio via HDMI Video output: • 1 x HDMI • 1 x HDbaseT • parallel output by HDMI and HDbaseT Audio output: • Digital via HDMI, switchable • Power amplifier output: 2 x 20 W @ 4 Ohm 2 x 10 W @ 8 Ohm Control: • • • • Front panel On-Screen-Menu RS-232 IP Other: • HDMI 1.3a, DVI1.0, HDCP1.3 • EDID Management • Switch as Audio-follows-Video or Break-Away • 8-Ievel volume control per audio input, 100-level volume control for audio Output. • Firmware updateable Architectural Specifications The architectural specification is available on the internet www.comm-tec.de Type: Manufacturer: UP-1200 COMM-TEC Presentation Switcher with Scaler UP-1200 Technical Specifications Composite / Component Video Control VGA Video HDbaseT Video HDMI Video Audio DisplayPort Video General Specifications are subject to change without notice. Mechanical dimensions may vary. COMM-TEC GMBH - SIEMENSSTRASSE 14 - D-73066 UHINGEN - PHONE ++49/(0)7161/3000-0 - FAX ++49/(0)7161/3000-400 - www.comm-tec.de