1. home and garden
2. home furnishings
3. lamps and lighting

Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Category:
Infrared Filters, Covert Covers, and Blackout IR Lenses
12/26/2014
Page: 1
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
24 Volt HID Light - 3200 Lumens - with Covert IR Blackout Lens Cover
Part #: 1870-M-IR-850
Price: $1,116.00
24 Volt HID Light - 5 X 7 inch rectangular light - modified spot pattern - internal ballast - stud mount - black
Specifications:
* Ballast & Igniter incorporated into lamp housing for easy installation
* 35W Xenon D2S bulb
* Over 50% less energy consumption compared to conventional lighting
* Heavy duty cast aluminum construction with durable black finish
* Uses common 24Volt DC
* Average current draw @24 VDC: Start: 6.1 amp, Run: 1.6amp (in under 60 sec)
* Designed for military applications
* Single stainless steel heavy duty stud mount with swivel bracket design
* Dust and water resistant design
* Weight: 4lb 4oz
* Modified Spot pattern (Approximate pattern 1500'L x 160'W)
Covert Infrared Blackout Lens Cover
* Borosilicate lens coated on both sides blocks all visible light (850nm cut off)
* Heavy duty machined aluminum construction with durable black powder finish
* Gasket seals all light
* Bracket with thumb nuts secures IR Blackout Cover to the High Intensity Discharge (HID) light
Links (Click on the below items to view):
- Dimensional Drawing
12/26/2014
Page: 2
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- Manual
12/26/2014
Page: 3
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Rechargeable HID Handheld Light - 35 Watts - IR850 Covert Lens - 4000' Spot Beam - Spot/Flood Combo
Part #: RL-10-IR
Price: $649.00
12/26/2014
Page: 4
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
12/26/2014
Page: 5
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
The RL-10-IR HID Rechargeable Handheld Light from Larson Electronics has a 35 Watt HID bulb that produces 3200 lumens of light
output capable of reaching distances to 4,000 feet. The RL-10 features several benefits, including a 4,000 foot beam, articulating head,
focusable beam and interchangeable batteries. This HID flashlight can also operate directly off of a 12 volt or 24 volt vehicle system via
optional vehicle adapter.
The RL-10-IR comes complete with the flashlight, two rechargeable NiMH 12V batteries, an AC charger, a carrying strap and a case. This is a
professional grade unit for industrial, agricultural, law enforcement, emergency services, fire search and rescue and marine use.
This particular model comes standard with the IR 850Nm covert lens, The IR850 cover is a high quality, covert 850Nm infrared blackout lens
cover for the RL-10 HID Flashlight. Infrared lens is made from hardened borosilicate and is coated on both sides. Cut off is 850 Nm with 90% +
energy transmission rate to 2300 Nm.
The infrared lens prevents visible light from passing through the lens. Night vision goggles, binoculars or cameras are required to view objects at
distance one the lens is attached. Built to military specifications, this covert infrared lens is applicable to military use and hunting. The infrared
lens holder is machined from aircraft grade aluminum and powder coated black. A simple bracket locking system with two thumb screws attaches
the cover to the light. Once in place, the cover is secure in any high vibration scenario. To remove the cover, the operator simply gives each
thumb screw a full turn and pulls the cover away from the light.
The application of the infrared lens black out cover does not interfere with the lens focusing ability of the HID light. In fact, the cover enables the
operator to more easily manipulate the adjustable focusing ring.
12/26/2014
Page: 6
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This image shows a dark street, illuminated by distance street lights.
SPOT Mode
FLOOD Mode
LUX Measurements:
SPOT
FLOOD
At the lens:
N/A
N/A
At 10 Feet:
40,800
4,680
At 15 Feet:
8,200
2,010
Lens Temp:
121 Degrees F
121 Degrees F
Head Temp:
91 Degrees F
91 Degrees F
The head on the RL-10-IR is made up of heavy duty aluminum and is five inches in diameter. The head on this unit pivots from 90 degrees to 180
degrees with the push of a button. The beam adjusts from flood to spot by rotating the lens. A compact ballast incorporated into the lamp housing
provides portability and light weight use.
Power: These flashlights are powered by rechargeable Ni-MH 12 volts batteries. The average recharge time of these batteries is four hours. An
LED charging indicator light will illuminate RED when charging and GREEN when fully charged. The charge cord plugs directly into the battery.
Each battery has a 70 minute runtime on a full charge.
Note about this HID Flashlight: To date, this is the brightest, toughest portable HID flashlight we have seen. While this started out as a Chinese
made flashlight, the electronics and optics of this model has been completely re-engineered to a higher specification, including the use of a GE
bulb, 4300 kelvin gas, Taiwanese ballast, Taiwanese switch, etc. We have looked at 50 and 70 watt HID spotlights and flashlights (which use a
35 watt bulb with higher wattage ballast) but there is little comparison. The sheer volume of projected natural colored light, combined with very
tough inner and outer construction make this handheld HID flashlight unique.
Note about Batteries: While lithium ion batteries are very popular right now, they do not push power to the light quickly. Ni-MH batteries will cut
the startup time of HID lights nearly in half. This HID flashlight will reach full power in just a few seconds, while many others will require 8-10
seconds to reach full power. Lithium ion batteries are light, have no memory and hold their charge over time on the shelf. The Ni-MH batteries in
this HID flashlight have similar properties. When NI-MH batteries are constructed properly, they have no memory and hold their charge over time
on the shelf. The Ni-MH batteries in this HID flashlight will discharge completely over a 6 month period of inactivity, where lithium ion batteries
take longer to discharge (9-12 months). Lithium ion batteries are very expensive compared to the Ni-MH batteries, which can often double the
final price of the HID flashlight. This HID flashlight uses high quality Ni-MH batteries, with run time, recharge and discharge properties similar to
lithium ion batteries. These Ni-MH batteries enable the use of higher quality ballast and optics, while keeping the final price competitive. These Ni
-MH batteries also enable the light to start more quickly, but they are approximately 1.5 pounds heavier than a lithium ion battery alternative.
For those that are familiar with cordless tools, this HID flashlight works just like any cordless drill. The batteries snap in and out of the base
easily. One battery can be charging while the other is in use. A separate accessory, the vehicle adapter snaps into the battery socket, enabling
users to run the light off of a 12 volt or 24 volt vehicle's power system indefinitely.
12/26/2014
Page: 7
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RL-10-IR HID Handheld Flashlight
Lamp Type: 35 Watt Xenon HID (High Intensity Discharge) Bulb
Dimensions: 5" Lens Diameter x 15.5" L
Weight: 6 Lbs - Light w/ battery 13 Lbs - Complete Kit
Total Watts: 35 watts
Voltage: 12V DC
Lighting Configuration: Flood and Spot Light Combo
Amps: 12.2 Starting Amps; 3.3 Run Amps
Mounting: Hand Held
Total Lumens: 3,200
Runtime: 70 minutes
Special Orders- Requirements
Lamp Color Temperature: 4300 Kelvin
Contact us for special requirements
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]
Scroll Down to Purchase-
12/26/2014
Page: 8
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- Manual
- STEP
- DXF
12/26/2014
Page: 9
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
HID Spotlight - 50 Watt HID- Alum Housing - 6.75" OD - 4500 lumens - SPOT - 850nm IR Blackout Cover
Part #: HID-65-50-S-IRC
Price: $671.00
High Intensity Discharge (HID) spotlight - 50 watt HID with internal ballast - SPOT BEAM PATTERN - 4000 foot long by 240 foot
wide (at widest portion) - long distance spot beam
Includes an 850 nanometer infrared blackout filter that snaps on to the front of the light, effectively blocking all visible light output. Night
vision equipment is required to make use of the non-visible light energy emitted. The filter lens cover snaps on and off easily, but stays
attached once snapped into place.
Die cast aluminum housing - 6.75 inches in lens diameter, 7.1 inches tall with mounting bracket, 5.2 inches deep, weighs 4.2 pounds
This HID spotlight uses arc lamp technology, which basically ignites gas, instead of a filament. As such, HID bulbs have much longer life
than halogen bulbs, since there is no filament to break in high vibration environments. In addition, the gas is not subject to deterioration
from heat, like halogen filaments, which also results in greater longevity. This HID-65-50 series spotlights will easily outperform a 500 watt
halogen lamp which will consume 21 amps on a 24 volt circuit, while producing less heat and drawing less than 2 amps. These HID
spotlights have an internally integrated ballast and take a simple power and ground wiring configuration. Thus, they can be used in place
of any similar configured halogen light. There is no need for replacement of in-vehicle wiring systems, switches or other harness related
equipment. A simple through hole mounting stud is comparable to other vehicle based mounted lights.
12/26/2014
Page: 10
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Features:
Precision metal reflectors focus light and retain shape over fixture life
50 watt HID Xenon D2 type Lamp produces 6800 kelvin color (bright white)
50 watt internal HID ballast - instant on, with 1-2 seconds to full power
13.3 amp start load on 12 Volts DC - 4.5 amps average draw after 60 seconds. 7 amps start load on 24 volts DC and 2.25 amps average
draw after 60 seconds.
Borosilicate hardened glass lens
Dust and water tight (gaskets and seals) - IP67 rated
Operates on any voltage 9 to 36 volts
Vibration tolerance: 8.6G RMS
Lumen Output - 4500 lumens
Weight: 2.29 kg (4.5 pounds)
Operating temperature: -40 degrees C to 105 degrees C
Simple bulb replacement facilitated by removing lens ring only.
IR Blackout Cover
Specifications:
12/26/2014
Page: 11
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Snaps on and off HID-65-50 light fixture.
Blocks all visible light below 850 nm
Polymer material is heat resistant, durable and protects spotlight lens
12/26/2014
Page: 12
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Infrared Lens Filter - Coated Borosilicate - 850nm Cut Off for RL-11 HID Spotlight - LENS ONLY
Part #: RL-11-IRF
Price: $538.00
Made in The USA
Infrared cut-off lens cover for R-11 HID light filters lamp output to allow only infrared light energy to pass. Produces invisible infrared
illumination in the 850nM range which requires the use of night vision devices to be seen.
850 nm cut off infrared lens blocks the projection of all visible light. The borosilicate substrate (commonly known as Pyrex) has the durability of
tempered glass and is coated on both sides. The lens is sealed into the machined aluminum housing. The housing is attached via bracket and
thumb nuts. The lens and lens holder are insulated/sealed with high temperature silicone and high temperature silicone gaskets to prevent light
leakage.
The lens holder assembly can be attached and removed quickly. Once secured, the unit can subjected to excessive vibration without risk of the
lens exposing the visible light. This milspec unit enables 93% of light energy to pass through the filter. Plastic infrared filter lenses usually allow
only 20% of the light energy to pass. This means that the RL-11 HID light will only lose 7% of its 3000 foot beam due to the lens. Other lights
using the plastic lens will lose up to 80% of the transmission length.
The light output produced with the use of this lens is invisible to the naked eye. Night vision cameras, goggles and similar devices are needed to
view the output from this lens.
THIS INFRARED LENS COVER ASSEMBLY IS MADE IN THE USA
Specifications / Additional Information
RL-11-IRF Infrared Lens Filter
Special Orders- Requirements
Use With: R-11 Series Lights
Contact us for special requirements
Wavelength: 850nM
Toll Free: 1-800-369-6671
Materials: Machined Aluminum - Pyrex™ Lens
Fax: 1-903-498-3364
Efficiency 93% Light Energy Passage
E-mail: [email protected]
Hardware: Steel Bracket - Thumb Nuts
Specs: Milspec
Scroll Down to Purchase-
Links (Click on the below items to view):
- Dimensional Drawing
12/26/2014
Page: 13
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- Manual
- STEP
- DXF
12/26/2014
Page: 14
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Infrared Blackout Lens for HML-6M and 1870 Series 12/24 VDC HID Spotlights and Floodlights
Part #: HML-6M-IRF
Price: $430.00
Infrared filter adapter for HML-6M spotlight and HML-6M-F flood light that eliminates all transmission of visible light
850 nm cut off with 90% transmission
Nightvision goggles required to see the infrared light transmission
The infrared lens adapter attaches via brackets, 2 hammer bolts and hand tightened knobs. The lens can be removed and attached easily.
Once attached, no amount of vibration will shake the lens loose.
LENS ONLY - DOES NOT INCLUDE LIGHT
12/26/2014
Page: 15
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Manual
12/26/2014
Page: 16
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
GL-15007 Covert Infrared Lens for Golight Radioray 2XXX, 7XXX and 5XXX Model Spotlights
Part #: GL-15007
Price: $344.84
Covert Infrared lens securely positions over the bulb to ensure that all visible emitted light is blocked. This prevents oncoming traffic,
animals, etc. from seeing the visible light. You will need night vision goggles in order to see objects at distance with this infrared lens on
the Golight spotlight. There is a difference between infrared lens and a red hunting lens. If you do not own night visions goggles,
binoculars, video camera, etc. and don't plan to purchase any, you should consider the Red Lens for Golight Radioray Remote Control
Spotlight.
% transmission 10-5 Ave from 400-700 nm
50% transmission @ 825+/- 15 nm
% transmission > 85% Ave 900-2500 nm
Normal angle of incidence (90 degrees)
Durability per Mil-F - 48616 (July 29, 1977)
This lens only works with the Golight Radioray 2XXX, Golight 5XXX and Golight 7XXX. It does not work with the Golight Stryker 3XXX.
This lens kit includes a replacement bezel (lens ring) and snap in lens. The replacement bezel replaces the bezel that ships with the
Golight remote controlled light. The replacement bezel attaches with the same four screws removed from the original bezel. Then the lens
snaps in between the two extended tabs on either side of the bezel. To remove the infrared covert lens, simply pull the tabs outward to
release the lens. This infrared lens is made from polymer (plastic) material.
12/26/2014
Page: 17
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
GL-15007 Covert Infrared Lens for Golight Radioray Remote Control Spotlight
Part #: GL-15007A
Price: $344.84
Covert Infrared lens securely positions over the bulb to ensure that all visible emitted light is blocked. This prevents oncoming traffic,
animals, etc. from seeing the visible light. You will need night vision goggles in order to see objects at distance with this infrared lens on
the Golight spotlight.
This IR cover includes a new bezel (lens holder). The operator must replace the existing lens holder. This is done by removing the 4
screws that hold the lens holder to the lamp holder housing. The replacement bezel has a design that enables the operator to snap on and
snap off the Infrared lens cover. On each side of the replacement bezel, there are two tabs. As the tabs are press outward, the lens is
released. The beveled design of the lens holder enables traps all visible light.
% transmission 10-5 Ave from 400-700 nm
50% transmission @ 825+/- 15 nm
% transmission > 85% Ave 900-2500 nm
Normal angle of incidence (90 degrees)
Durability per Mil-F - 48616 (July 29, 1977)
This lens only works with the Golight Radioray model numbers that begin with 2, 5 or 7. The infrared lens does not work with any Golight
Stryker model numbers that start with 3.
12/26/2014
Page: 18
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Infrared lens for Golight Profiler II - GL-81007
Part #: GL-81007
Price: $251.10
Covert infrared lens for the Golight Profiler II - 850 nm
12/26/2014
Page: 19
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Infrared Black Out Lens Cover for Larson Electronics and ControLights - HML-5M-IR-850
Part #: HML-5M-IR-850
Price: $269.00
Infrared Black Out Lens Cover for Larson Electronics and ControLights. This infrared blackout cover is commonly used with the HML-5MCP 24 volt spotlight in the Escalation of Force Kit. 6 inch diameter lens is designed to fit on most of the Larson Electronics HML, ML, CML
and MUL spotlights.
Machined aluminum cover with removable infrared lens. Fits all Larson Electronicss and ControLights.
Infrared lens is coated borosilicate (both sides) with 850nm cut off. Light energy transmission is 93%+
The standard lens bezel is removed and this covert infrared lens cover is twisted into place and secured by a single screw at the bottom.
Once in place, all visible light is contained and only light above 850nm is projected.
12/26/2014
Page: 20
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
12/26/2014
Page: 21
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Covert Infrared Blackout Cover for Roof Mount and Post Mount Lights
Part #: U-IR-850
Price: $269.00
Covert infrared blackout lens cover for post mount and roof mount lights
Machined aluminum cover with removable infrared lens and protective Lexan protective lens. Fits all post mount and roof mount lights.
This blackout cover fits all Unity mount and roof mount lights.
Infrared lens is coated borosilicate with 850nm cut off. All visible light is blocked and 93% of infrared light energy passes. Night vision
goggles are required to make use of this cover.
12/26/2014
Page: 22
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Infrared Lens Filter - Coated Borosilicate - 850nm Cut Off for RL-12 HID Spotlight - LENS ONLY
Part #: RL-12-IRF
Price: $269.00
Made in The USA
Infrared cut-off lens cover for RL-12 HID light filters lamp output to allow only infrared light energy to pass. Produces invisible infrared
illumination in the 850nM range which requires the use of night vision devices to be seen.
850 nm cut off infrared lens blocks the projection of all visible light. The borosilicate substrate (commonly known as Pyrex) has the durability of
tempered glass and is coated on both sides. The lens is sealed into the machined aluminum housing. The housing is attached via bracket and
thumb nuts. The lens and lens holder are insulated/sealed with high temperature silicone and high temperature silicone gaskets to prevent light
leakage.
The lens holder assembly can be attached and removed quickly. Once secured, the unit can subjected to excessive vibration without risk of the
lens exposing the visible light. This milspec unit enables 93% of light energy to pass through the filter. Plastic infrared filter lenses usually allow
only 20% of the light energy to pass. This means that the RL-12 HID light will only lose 7% of its 5,500 foot beam due to the lens. Other lights
using the plastic lens will lose up to 80% of the transmission length.
The light output produced with the use of this lens is invisible to the naked eye. Night vision cameras, goggles and similar devices are needed to
view the output from this lens.
THIS INFRARED LENS COVER ASSEMBLY IS MADE IN THE USA
Specifications / Additional Information
RL-12-IRF Infrared Lens Filter
Special Orders- Requirements
Use With: RL-12 Series Lights
Contact us for special requirements
Wavelength: 850NM
Toll Free: 1-800-369-6671
Materials: Machined Aluminum - Pyrex™ Lens
Fax: 1-903-498-3364
Efficiency 93% Light Energy Passage
E-mail: [email protected]
Hardware: Steel Bracket - Thumb Nuts
Specs: Milspec
Scroll Down to Purchase-
12/26/2014
Page: 23
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
HLC-IR Infrared Headlight Covers Black Out Visible Light for Military Humvees
Part #: HLC-IR
Price: $260.00
Aluminum head light covers holds 7-inch diameter infrared lens to black out visible light. The headlight filter cover
blacks out visible light, enabling HMMWV (Hummer/HUMVEE) operators to move covertly at night with supporting
night vision optics. These headlight covers encapsulate the headlight completely, containing visible light and emitting
only infrared wave length light.
THIS PRODUCT IS FOR ONE HEADLIGHT COVER AND NOT A PAIR.
The aluminum housing is machined from aircraft grade aluminum in Fort Worth Texas. Material certifications available
for Berry Amendment compliance. The housing has three slots that align with the existing mounting screws securing
the headlight assembly. The housing also includes a retaining snap ring for the lens. An entire headlight cover
assembly is not required if the lens is damaged, as damaged lenses can be changed easily in the field.
Installation and maintenance only require a few minutes.
The 7-inch diameter, 1/8 inch thick lens is composed borofloat glass (tempered glass characteristics) with vacuum
chamber applied coatings, producing 850 nm cutoff. The infrared lens hides visible light and emits infrared light. Our
lens has a 90% transmission rate (spectral available upon request). In other words, 90% of the light produced by the
headlights is projected past the lens. Alternative headlight covers made of polycarbonate/polymer blends only allow
20% transmission. Operators will see nearly 3 times farther with this headlight cover than polycarbonate blend
covers. In addition, this lens is manufactured in the Dallas Fort Worth, not China.
A single 7 inch OD snap ring holds the polycarbonate protective lens, IR lens and 2 silicone gaskets in place. Any
pair of pliers, snap ring pliers or military issue Leatherman knife sets can be used to release and replace the snap
ring. The silicone gaskets are reusable and the lenses can be changed in the field in under 30 seconds in the event of
damage.
12/26/2014
Page: 24
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
The headlight cover lens assembly includes 3 Chicago style machine screws which will engage and secure the two
sets of threads within the headlight assembly. These screws replace the screws that come with the original HMMWV
headlight assembly.
There is no temperature limit with this unit. While polycarbonate blends cannot withstand high wattage bulbs
producing more than 200 degrees F, this unit can withstand temperatures beyond 500 degree F.
Powder coated black (tan or olive drab available on request).
All component manufacturing, finishing and assembly are done in Dallas Fort Worth, Texas, USA.
12/26/2014
Page: 25
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
12/26/2014
Page: 26
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Red Lens Cover for Post Mount and Roof Mount Lights
Part #: U-RL-550
Price: $160.00
Red lens cover for post mount and roof mount lights.
Machined aluminum cover with removable red lens and protective Lexan protective lens. Fits all post mount and roof mount lights.
This red lens cover fits all Unity post mount and roof mount lights.
Red lens is vacuum coated borosilicate. 95% of light energy passes.
12/26/2014
Page: 27
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Covert Infrared Cover for RL-14 - Snap On/Off - 850nm Cut off Blocks All Visible Light
Part #: RL-14-IR
Price: $109.00
Covert Infrared Filter Cover for the RL-14 High Intensity Discharge (HID) spotlight with 3350 Lumen output. Cover can be snapped on and
off. IR filter cover attaches to groove on lens protector/holder. Once attached, night vision equipment is required to see the non-visible
light output.
Infrared filters block 99% of the visible light spectrum from the HID light bulbs. These filters allow a maximum of Infrared output while
maintaining extreme covertness. Originally manufactured for the US Military, these filters are designed to meet stringent military standards.
The polysulfone blend is known for its strength and when used with a flashlight, these filters will drastically improve the effectiveness of
your night vision equipment.
12/26/2014
Page: 28
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Hi-Res Image 1 - Hi-Res Image 2 - Hi-Res Image 3 -
12/26/2014
Page: 29
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- Hi-Res Image 4 - Hi-Res Image 5 - Hi-Res Image 6 - Hi-Res Image 7 - Hi-Res Image 8 -
12/26/2014
Page: 30
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
IR lens with 850nm cut off coating - 90 transmission - tempered borosilicate
Part #: IR-850NM-Lens
Price: $80.00
IR lens with 850nm cut off coating on both sides. 90%+ light energy transmission rate. Tempered borosilicate base material.
www.larsonelectronics.com offers a wide range of custom lens to specification. Please provide dimensions and wavelength specifications.
Minimum runs required for some requirements.
12/26/2014
Page: 31
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Infrared Cover for the HID-65-50-S Spotlight - 850NM
Part #: 65IRC-PC-850NM
Price: $61.00
A 850 nanometer infrared blackout filter that snaps on to the front of the HID-65-50-S Spotlight, effectively blocking all visible light output.
Night vision equipment is required to make use of the non-visible light energy emitted. The filter lens cover snaps on and off easily, but
stays attached once snapped into place.
IR Blackout Cover
12/26/2014
Page: 32
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications:
Snaps on and off HID-65-50 light fixture.
Blocks all visible light below 850 nm
Polymer material is heat resistant, durable and protects spotlight lens
12/26/2014
Page: 33