M2M EASY
GUARD ZIGBEE®
Wireless (ZigBee) home alarm system, standalone solution for private
safety with easy installation and GSM/GPRS communication
The M2M Easy GUARD ZigBee® product package offers an overall
solution for the private and home security & safety area for the home
user as an easy to install, intelligent alarm system.
The standalone communicator is able to receive the ZigBee sensor
signals (like remote controller, panic button, movement detector,
door opening, etc.) through the connected ZigBee extender board.
Otherwise the signals of the traditional wired systems are also be able
to receive (like signal and status changes of external, wired devices or
controlling output, connect to a present alarm system).
The device transmits the life signals and alarm events in standard
Contact ID format to the centre or a remote surveillance center
through the GSM/GPRS network.
The User can receive information about the alarm events in SMS or
phone ringing.
The system assures continous operation and high availability with
reliability.
The LED signals of the device are easy to understand. The installation
of the system is also simple, the configuration is easy.
FIELDS OF APPLICATION
•
•
•
•
•
•
Standalone wireless home alarm system
Signal transmitting to remote centre
Elderly- and patience care tasks (Panic, fall detection)
Receiving signals of ZigBee sensors
Remote controlling of digital output (SMS, voice call)
As a part of the Gate Opening system
M2M Easy GUARD ZigBee®
technical features
TECHNICAL FEATURES
•
•
•
•
•
•
•
•
Communication software which
especially developped for security &
safety areas and signal transmitting
Standalone alarm signalling (generates
Contact ID codes to signal changing)
Advanced transmitting to alarm centers
• on GPRS to 2 servers (primary,
backup)
• GSM-based Contact ID trans
mitting on GSM to one phone number
• Compatibility with several alarm
systems (able to transmit the
signals of to the remote center in
Contact ID format)
Receiving signals of the ZigBee sensors
(2.4 GHz)
• ZigBee remote controller (arm,
disarm, panic, fall detection)
• ZigBee sensor signals (status
changes, values)
• Max. 10 ZigBee sensor can be
paired
The concentrator devce supports the
following ZigBee devices which fits to
the requirements:
• Stack profile: ZigBee 2007 Pro
• Application profile: Home
Automation
• IAS Zone Cluster (0x0500) server
endpoint
Transmitting ALARM- and voltage /
contact input signals (input line status
changes):
• GPRS transmitting to 2 IP address (primary, backup)
• GSM voice call to one analog
phone line
The alarm events notifications can be
sent to max. 4 phone numbers (SMS
and voice call)
Output controllable remotely by:
• SMS commands, ringing
• Bi-stable and mono-stable operation modes (max. delay: 1
day)
•
•
•
•
•
•
•
• Gate opening and performing
Arm/Disarm event to the Alarm
System:
• Storage of max. 125
phone numbers
• Optional SMS messaging
of the output status
Free to configure the life signal sending
frequency (second, minute)
Configurable 24h input lines
High availability, reliability and stability
with continuous operation
Gemalto® BG2-E module (GSM/GPRS
Class 8)
EasyTerm® configuration software (on
Windows® operation system)
Firmware refresh, program change,
configuration via:
• RJ11 connector (refresh, config)
• SMS commands (refresh, config)
• TCP/IP (configuration)
• FTP (refresh)
Operation status LEDs
CONNECTORS
•
•
•
•
•
•
•
•
2x voltage/contact input (non-isolated
GND)
1x relay output
1x simulated analog phone line input
(TIP-RING) for security alarm centers
Power connector (8-24VDC, 800mA)
RJ11 connector (configuration,
firmware refresh, debug)
2x SMA-M antenna connector (50 Ohm)
- GSM/GPRS, ZigBee
Push insert-SIM card bay
Expansion module connector
PACKAGE CONTENT
•
•
•
•
•
•
•
1x M2M Easy 2 Security
Communicator®
1x ZigBee coordinator (expansion
module)
2x antenna (GSM/GPRS, ZigBee)
1x Security coverage (metal box)
1x Power adapter PCB, accumulator
1x 15VDC power supply unit
Optional: ZigBee Remote controller,
wireless battery recharger, ZigBee
sensors
STATUS LED SIGNALS
•
Input line status, relay output status,
GSM modem communication, Signal
strength, Power supply, TIP-RING
communication, Faults
POWER AND SIGNAL LEVEL
•
•
•
•
•
Current:
• 40-65mA/12V (standby)
• 130mA (1800MHz 1W/900MHz 2W)
Input high signal level: 5-24V
Input low signal level: 0-1V
Current in active status (contact input):
0,3-1mA
Controllable current: 2A-120VAC,
1A-24VDC
MECHANICAL CONSTRUCTION
•
•
•
•
•
Dimensions: 270 x 186 x 55, in metal
security case/box
Weight: without battery pack - 1133gr
Weight: with battery pack - 1990gr
IP21 protection
Operation temperature: between -20°C
and +60°C at 0-80% rel. humidity
The applied ZigBee devices described
in
the
„ZigBee
Cluster
Library
Specification”
„Security
and
Safety
Specification” chapter in the safety.
The assembled system can be found in the
document as „Intruder Alarm Systems” (IAS).
The coordinator PCB assures the CIE role in the
network (Control and Indicating Equipment)
and receives the signals of the ZigBee sensors.
The product fits to the relevant standards
and requirements and the standards and
directives.
The images on the data sheet are for illustration purposes only.
WM Systems LLC. cannot be held liable for erroneous information on the data sheet.
The announced data are subject to change without notice.
The details on the data sheet are for general information purposes only. For more specific
details, please contact our colleagues.
WM Systems LLC. tel.: +36 1 310 7075, fax.: +36 1 319 8249,
www.m2mserver.com