YOLBIR MAKINA PLASTIC CRUSHING MACHINES WASTE CABLE RECYCLING AND COPPER SIEVING PLANT MACHINE MANUFACTURING AND DESIGN SETTING UP TURNKEY-DELIVERY PLANTS ADDRESS : Gümüş suyu Cad. Litros Yolu, Fatih Şehitleri Sokak, Yildiz Han, B Blok, No: 81 Topkapi – Maltepe / ISTANBUL TEL : 090 212 565 64 47 FAX: 565 45 26 GSM : 0535 769 63 13 - 0532 615 07 99 V.D. : DAVUTPASA 981 005 85 29 YOLBIR MAKINA is a prestigious company with in-depth experience and background since 1972. The company is primarily engaged in cable recycling machines and plastic crushing machines. The company had also undertaken various contracting manufacturing jobs before. The machines we manufacture are distinguished in terms of - technical structure - design - engineering services and - quality of materials employed. We are committed to maintaining and further improving our corporate assets above, consistently offering supreme-quality service to our customers, fulfilling the demands of customers to their full satisfaction, manufacturing sophisticated, reliable and durable machines, and providing full service for every machine we have manufactured. TYPES AND SPECIFICATIONS OF OUR MACHINES Type (cm) 30-cm 35-cm 40-cm 45-cm 50-cm 60-cm 70-cm 80-cm Jaw height (mm) 1250 1250 1300 1350 1350 1400 1430 1450 Machine width (mm) 1000 1050 1060 1100 1180 1200 1300 1400 850 900 950 1100 1150 1200 1450 1450 Depth (mm) Number of rotary blades 3 – 5 blades Number of fixed blades 2 Engine kWA Output kg/h These are average values and may vary according to the raw materials used 11 15 18,5 22 30 37 55 55 150 200 250 350 400 450 550 600 1800 1850 Sieve mesh diameter Machine weight (kg-approximately) Wir fertigen in gewünschten Durchmessern 500 700 900 1200 1600 1700 YOLBIR MAKINA PLASTIC CRUSHING MACHINES WASTE CABLE RECYCLING AND COPPER SIEVING PLANT MACHINE MANUFACTURING AND DESIGN SETTING UP TURNKEY-DELIVERY PLANTS ADDRESS : Gümüş suyu Cad. Litros Yolu, Fatih Şehitleri Sokak, Yildiz Han, B Blok, No: 81 Topkapi – Maltepe / ISTANBUL TEL : 090 212 565 64 47 FAX: 565 45 26 GSM : 0535 769 63 13 - 0532 615 07 99 V.D. : DAVUTPASA 981 005 85 29 OPERATING MANUAL First, position the machine balanced before operating it. well- Refer to a qualified electrician for the electrical connections of the machine. Check that the safety system is ready to operate. Check that emergency stop is ready to operate. Check that the switch is on when the machine is started. Effect the operational adjustments of the machine, check and then commission the machine As a daily maintenance, check the grease level in roller bearings. If possible, please use the grease type TEMP 90 L 12 V. ATTENTION: Strictly cut off the mains power during any maintenance, repair or blade adjustment. Do not wire any machine other than your system to the switchboard. Do not attempt to operate the machine while the upper cover is open. Do not operate the machine unless the flywheel housings are fitted. Cut or shrink long work pieces before feeding them to the machine. Strictly comply with safe working principles The switch prevents the machine from starting while the upper cover is open. Strictly connect. After starting shutting the and machine, strictly tighten the bolts that unite the upper and lower covers. Do not commission the machine without tightening. Start-Stop button: Use this button for ordinary or emergency stop when the machine is in operation. The operation of the machine may be resumed via the control panel by reinstating the emergency stop button. BLADE ADJUSTMENT BLADE ADJUSTMENT 1. Position the rear fixed blade properly and tighten its bolts in place to install the unit reliably. 2. Adjust the blades on the rotor properly so that they travel very closely to the fixed blade without touching it, and then tighten them in a controlled manner and then fix. This procedure is repeated for all blades on the rotor. Finally, adjust the blade on the front section of the machine and tighten as illustrated above. Note: After this procedure is completed, check and tighten the bolts that fix all of the blades for safety purposes. BLADE CONNECTION Adjust and connect the blades as illustrated below: ARKA BIÇAK BICAK RODOR ÖN BIÇAK ELEK : : : : : REAR BLADE BLADE ROTOR FRONT BLADE SIEVE FILTER Catches and compiles the dust and cotton particles coming away from the sieving machine prevents these and particles from getting widespread in the environment. Facilitates to medical and environmental issues. The collected dust and cotton particles are stored in the reservoir fitted underneath the machine, therefore contaminants these can be handled and removed in bulk form.