ALKON
FASTENERS
B O LT S , N U T S
& WASHERS
P R O D U C T C ATA LO G U E
MELBOURNE
12-14 Abruzzo Cres, Thomastown, VIC, 3074
P (03) 9464 3711 F (03) 9464 3733
E [email protected]
BRISBANE
2/25 Michlin St, Moorooka, QLD, 4105
P (07) 3848 6855 F (07) 3848 0411
E [email protected]
WWW.ALKON.COM.AU
ALKON FASTENERS
THE TRUSTED BRAND IN
INDUSTRIAL FASTENERS.
Alkon Sales Pty Ltd has been a 100% Australian
owned fastener supply company for over 40 years,
during which time we have been involved in all facets
of manufacture, importation and distribution of
products to many satisfied customers Australia wide.
We have held ISO 9001 quality certification since
1993, and we were the first Victorian small business
company audited to this effect.
We are proudly part of the INENCO Group of
companies (Consolidated Bearing Co. Hardy Spicer,
Specialised Gaskets, Circlips Australia, to mention just
a few) who employ 1,700 people in over 140 outlets
throughout Australia.
Our own comprehensive experience and involvement
with manufacturing plants in Australia and overseas
enables us not only to insist on best practice, but also
to incorporate our own design features for better
product performance. We travel to our associate’s
facilities on a regular basis to satisfy that standards are
being maintained and this level of close co-operation
has resulted in us having some quite exclusive supply
arrangements.
MELBOURNE
DECK
TIMBER
WING
DRILL
BRISBANE
ALKOTE TP
To ensure consistent product quality all stock is
inspected to relevant Australian or international
standards, and parts specially manufactured are
checked against the relevant drawing or specification.
All product supplied into the market by Alkon has
full traceability to the source of manufacture, and
suppliers are chosen on their ability to provide
DUO
consistently high standard of product.
DRILL
We are continually looking to expand our product
range, and seeking new ideas, as we place a high
value on technical knowledge and problem solving
skills. Parts can be manufactured
DUO to customers
specifications. We are now also able to offer
specialised packaging to suit your requirements
DRILL
ALKOTE TP
We are proud of our staff and their ability to offer the
best standards of service in answer to your enquiries.
We offer extremely competitive pricing and national
distribution with response times second to none.
DRILL
DUO
Quality Coatings
DRILL
Quality Coatings
DECK
TIMBER
WING
DECK
DRILL
TORPEDO
TORPEDO
WING
DRILL
POLYCARBÊ
UO
POLYCARBÊ
DUO DDUO
Quality Coatings
ALKOTE TP
Quality Coatings
DRILL
Quality Coatings
Quality Coatings
T
FULL PRODUCT RANGE
• Chipboard Screws
• Drop-In Anchors
• Super Chipboard Screws
• Plaster Wall Plugs/Anchors
• Particle Board Screws
• Nail-In Plugs
• Director Screws
• Rivets
• Lag Screws (Hanger Bolts)
• Driver Bits
• Euro Screws (Hinge Screws)
• Jobber Drills
• Multi-Purpose Wood Screws
• Threaded Rod
• Self Tapping Screws
• Hex Key Wrenches
• Stitching Screws • Neoprene Washers
(aka. Needle Point)
• Circlips Handy Packs
• Drywall Screws
• Cement Sheet Screws
• Self Drilling Screws
• Series 500 Self Drillers
• Roofing Screws (aka. Reduced Point Self Drillers)
• Type 17 Screws for Timber
• Stainless Steel:
- Bolts & Nuts (Gr.304 & 316)
- Set Screws (Gr.304 & 316)
- Washers
- Nuts & Nylocs
• High Tensile + Mild Steel:
- UNC – Bolts & Nuts
- UNF – Bolts & Nuts
- Metric – Bolts & Nuts
- Socket Head Cap Screws
- Structural Bolts
• Bugle Batten Screws
• Washers
• Decking Screws
• Nails
• Metal Thread Screws
• Brads
• Furniture Screws
• Cup Head Bolts
• SEMS Screws
• Purlin Assemblies
• Tee Nuts for Timber
• Roofing Bolts
• Screwbolts
• Coach Screws
• Masonry Sleeve Anchors
+ More!
FOR ALL OUR PRODUCTS AND SERVICES GO TO WWW.ALKON.COM.AU
CONTENTS
BOLTS - HIGH TENSILE
PRODUCT
PAGE
METRIC RANGE
Hex Bolts - METRIC - Class 8.8
10
Hex Bolts - METRIC Fine Pitch - Class 8.8
14
Hex Bolt & Nut - METRIC - Class 8.8
15
Screwbolts - METRIC - Hex Head
22
IMPERIAL RANGE
Hex Bolts - IMPERIAL UNC - Grade 5
15
Hex Bolts - IMPERIAL UNC - Grade 8 17
Hex Bolts - IMPERIAL UNF - Grade 5
21
Hex Bolts - IMPERIAL UNF - Grade 8
21
SET SCREWS - HIGH TENSILE
PRODUCT
PAGE
METRIC RANGE
Hex Set Screws - METRIC - Class 8.8
23
IMPERIAL RANGE
Hex Set Screws - IMPERIAL UNC - Grade 5
25
Hex Set Screws - IMPERIAL UNF - Grade 5
25
5
CONTENTS
NUTS
PRODUCT
PAGE
Hex Nuts - METRIC
26
Hex Nuts - IMPERIAL BSW
27
Hex Nuts - IMPERIAL UNC
27
Heavy Series Hex Nuts - METRIC - Grade 2H
27
Flange Serrated Locking Nuts - METRIC
28
Nylon Insert Locking Nuts - METRIC
28
Nylon Insert Locking Nuts - IMPERIAL
29
Wing Nuts - METRIC
29
Wing Nuts - IMPERIAL
30
Tee Nuts - METRIC - 4-Prong for Timber
30
Tee Nuts - IMPERIAL BSW - 4-Prong for Timber
31
WASHERS
PRODUCT
6
PAGE
Flat Washers - METRIC
32
Flat Washers - IMPERIAL
33
Mudguard Washers - IMPERIAL
35
Hardened Washers - METRIC
36
Hardened Washers - IMPERIAL
36
Spring Washers - METRIC - Flat/Medium Section
37
Spring Washers - IMPERIAL - Flat/Medium Section
37
CONTENTS
WASHERS (Continued)
PRODUCT
PAGE
Internal Shakeproof (Lock/Tooth) Washers - METRIC
38
Internal Shakeproof (Lock/Tooth) Washers - IMPERIAL
38
Square Washers - METRIC
39
Wave Washers - IMPERIAL
39
BOLTS - LOW TENSILE
PRODUCT
PAGE
Hex Bolt & Nut - METRIC - Class 4.6
40
Coach Bolt & Nut - METRIC - Class 4.6
40
Coach Bolt & Nut - IMPERIAL - Class 4.6
41
Flange Purlin Bolt & Nut - METRIC - Class 4.6
41
SET SCREWS - LOW TENSILE
PRODUCT
Hex Set Screws - METRIC - Class 4.6
PAGE
42
MISC.
SECTION
PAGE
Thread Guide
44
Terms & Conditions
46
7
PACKAGING OPTIONS
ALKON PROVIDES HIGH QUALITY
'MERCHANDISE DISPLAY STANDS'
EACH STAND CAN BE EASILY
CUSTOMISED WITH A NUMBER
OF PRODUCTS TO SUIT YOUR
SPECIFIC NEEDS.
CHOOSE HOW YOU STOCK YOUR STAND
FROM A VARIETY OF PACKAGING TYPES.
"WHETHER IT'S 10 SCREWS OR 10,000 WE'LL PACK IT!"
8
PACKAGING OPTIONS
Buckets
Hang Packs
FOUR SIZES AVAILABLE
TWO SIZES AVAILABLE
ALKON IS PROUD TO PROVIDE A RANGE OF QUALITY PACKAGING
OPTIONS, ALL OF WHICH CAN BE LABELLED AND EVEN BRANDED
TO YOUR COMPANY'S OWN SPECIFICATIONS!
Tubs
Boxes
THREE SIZES AVAILABLE
THREE SIZES AVAILABLE
9
BOLTS - HIGH TENSILE
HEX BOLTS - METRIC
M4 - M8
CLASS 8.8
FINISHES: Zinc Plated (Silver) / Black
Hexagonal heads and machine threads for use with a nut or in a tapped hole.
SIZE
M4
10
M4 x 16mm
M6
M6 x 12mm
M6 x 16mm
M6 x 20mm
M6 x 25mm
M6 x 30mm
M6 x 35mm
M6 x 40mm
M6 x 45mm
M6 x 50mm
M8
M8 x 16mm
M8 x 20mm
M8 x 25mm
M8 x 30mm
M8 x 35mm
M8 x 40mm
M8 x 45mm
M8 x 50mm
M8 x 55mm
M8 x 60mm
M8 x 65mm
M8 x 70mm
M8 x 75mm
M8 x 80mm
M8 x 90mm
CODE
ZINC
BQ0416ZP
BQ0612ZP
BQ0616ZP
BQ0620ZP
BQ0625ZP
BL0630ZP
BL0635ZP
BL0640ZP
BL0645ZP
BL0650ZP
BQ0816ZP
BQ0820ZP
BQ0825ZP
BL0830ZP
BL0835ZP
BL0840ZP
BL0845ZP
BL0850ZP
BL0855ZP
BL0860ZP
BL0865ZP
BL0870ZP
BL0875ZP
BL0880ZP
BL0890ZP
BLACK
-
-
BQ0616BL
BQ0620BL
-
BL0630BL
-
-
-
-
-
BQ0820BL
BQ0825BL
BL0830BL
-
-
-
BL0850BL
-
BL0860BL
-
-
-
-
-
BOLTS - HIGH TENSILE
HEX BOLTS - METRIC
M10 - M12
CLASS 8.8
FINISHES: Zinc Plated (Silver) / Black
Hexagonal heads and machine threads for use with a nut or in a tapped hole.
SIZE
M10
M10 x 20mm
M10 x 25mm
M10 x 30mm
M10 x 35mm
M10 x 40mm
M10 x 45mm
M10 x 50mm
M10 x 55mm
M10 x 60mm
M10 x 65mm
M10 x 70mm
M10 x 75mm
M10 x 100mm
M12
M12 x 30mm
M12 x 35mm
M12 x 40mm
M12 x 45mm
M12 x 50mm
M12 x 55mm
M12 x 60mm
M12 x 65mm
M12 x 70mm
M12 x 75mm
M12 x 80mm
M12 x 90mm
M12 x 100mm
M12 x 110mm
CODE
ZINC
BQ1020ZP
BQ1025ZP
BL10030ZP
BL10035ZP
BL10040ZP
BL10045ZP
BL10050ZP
BL10055ZP
BL10060ZP
BL10065ZP
BL10070ZP
BL10075ZP
BL10100ZP
BL12030ZP
BL12035ZP
BL12040ZP
BL12045ZP
BL12050ZP
BL12055ZP
BL12060ZP
BL12065ZP
BL12070ZP
BL12075ZP
BL12080ZP
BL12090ZP
BL12100ZP
BL12110ZP
BLACK
BQ1020BL
BQ1025BL
BL10030BL
BL10035BL
BL10040BL
-
BL10050BL
-
-
-
-
-
-
-
-
-
BL12045BL
BL12050BL
BL12055BL
BL12060BL
-
BL12070BL
-
-
-
BL12100BL
-
11
BOLTS - HIGH TENSILE
HEX BOLTS - METRIC
M12 - M18
CLASS 8.8
FINISHES: Zinc Plated (Silver) / Black
Hexagonal heads and machine threads for use with a nut or in a tapped hole.
SIZE
M12
12
M12 x 120mm
M12 x 150mm
M12 x 170mm
M14
M14 x 30mm
M16
M16 x 25mm
M16 x 30mm
M16 x 35mm
M16 x 50mm
M16 x 55mm
M16 x 60mm
M16 x 65mm
M16 x 70mm
M16 x 75mm
M16 x 80mm
M16 x 90mm
M16 x 100mm
M16 x 110mm
M16 x 120mm
M16 x 160mm
M16 x 200mm
M16 x 240mm
M18
M18 x 55mm
M18 x 100mm
CODE
ZINC
BL12120ZP
BL12150ZP
BL12170ZP
BL14030ZP
BQ1625ZP
BQ16030ZP
BL16035ZP
BL16050ZP
BL16055ZP
BL16060ZP
BL16065ZP
BL16070ZP
BL16075ZP
BL16080ZP
BL16090ZP
BL16100ZP
BL16110ZP
BL16120ZP
-
BL16200ZP
-
BL18055ZP
-
BLACK
-
-
-
-
-
BL16030BL
-
BL16050BL
-
BL16060BL
-
BL16070BL
-
BL16080BL
-
BL16100BL
-
-
BL16160BL
-
BL16240BL
-
BL18100BL
BOLTS - HIGH TENSILE
HEX BOLTS - METRIC
M20 - M30
CLASS 8.8
FINISHES: Zinc Plated (Silver) / Black
Hexagonal heads and machine threads for use with a nut or in a tapped hole.
SIZE
CODE
M20 x 40mm
M20 x 50mm
M20 x 55mm
M20 x 60mm
M20 x 65mm
M20 x 70mm
M20 x 75mm
M20 x 80mm
M20 x 85mm
M20 x 90mm
M20 x 100mm
M20 x 130mm
M20 x 150mm
M24
M24 x 80mm
M24 x 90mm
M24 x 100mm
M30
M30 x 70mm
M30 x 90mm
M30 x 100mm
M30 x 120mm
M30 x 130mm
M30 x 140mm
BQ20040ZP
BL20050ZP
BL20055ZP
BL20060ZP
BL20065ZP
BL20070ZP
BL20075ZP
BL20080ZP -
BL20090ZP
BL20100ZP
BL20130ZP
-
-
BL24090ZP
BL24100ZP
-
-
-
-
-
-
M20
ZINC
BLACK
-
BQ20050BL
-
BL20060BL
BL20065BL
BL20070BL
BL20075BL
BL20080BL
BL20085BL
BL20090BL
BL20100BL
-
BL20150BL
BL24080BL
BL24090BL
BL24100BL
BL30070BL
BL30090BL
BL30100BL
BL30120BL
BL30130BL
BL30140BL
13
BOLTS - HIGH TENSILE
HEX BOLTS - METRIC
M36
CLASS 8.8
FINISHES: Zinc Plated (Silver) / Black
Hexagonal heads and machine threads for use with a nut or in a tapped hole.
SIZE
CODE
M36 x 75mm M36 x 80mm
M36 x 110mm
M36 x 120mm
M36 x 130mm
M36 x 150mm
M36 x 160mm
M36 x 170mm
M36 x 180mm
M36 x 200mm
-
-
-
BL36120ZP
-
-
-
-
-
-
M36
ZINC
BLACK
-
-
BL36110BL
-
BL36130BL
BL36150BL
BL36160BL
BL36170BL
BL36180BL
BL36200BL
HEX BOLTS - METRIC FINE
M10
CLASS 8.8 - FINE PITCH
FINISH: Black
Hex bolt with higher load carrying capacity & resistance to vibration loosening.
SIZE
M10
M10 x 25mm (Fine Pitch 1.25mm) M10 x 50mm (Fine Pitch 1.25mm)
14
CODE
BLACK
BL10025(1.25)BL
BL10050(1.25)BL
BOLTS - HIGH TENSILE
HEX BOLT & NUT - METRIC
M10 - M12
CLASS 8.8
FINISHES: Zinc Plated (Silver) / Black
Hexagonal head bolt and matching nut packaged together.
SIZE
CODE
M10 x 25mm
M12
M12 x 50mm
BL10025ZP
-
M10
ZINC
BLACK
-
BL12050BL
HEX BOLTS - IMPERIAL
1/4" UNC
GRADE 5
FINISH: Zinc Plated (Silver)
Hexagonal heads and machine threads for use with a nut or in a tapped hole.
SIZE
CODE
1/4 x 3/4"
1/4 x 1"
1/4 x 1-1/4"
1/4 x 1-1/2"
1/4 x 2" 1/4 x 2-1/2"
1/4 x 3"
BH1/4020(GR5)ZP
BH1/4025(GR5)ZP
BH1/4032(GR5)ZP
BH1/4038(GR5)ZP
BH1/4050(GR5)ZP
BH1/4064(GR5)ZP
BH1/4075(GR5)ZP
1/4"
ZINC
15
BOLTS - HIGH TENSILE
HEX BOLTS - IMPERIAL
5/16 - 7/16" UNC
GRADE 5
FINISHES: Zinc Plated (Silver) / Black
Hexagonal heads and machine threads for use with a nut or in a tapped hole.
SIZE
5/16"
5/16 x 3/4"
5/16 x 1"
5/16 x 1-1/4"
5/16 x 1-1/2"
5/16 x 2"
5/16 x 2-1/2"
3/8"
3/8 x 3/4"
3/8 x 1"
3/8 x 1-1/4"
3/8 x 1-1/2"
3/8 x 1-3/4"
3/8 x 2"
3/8 x 2-1/2"
3/8 x 3"
7/16"
7/16 x 2"
16
CODE
ZINC
BH5/16020(GR5)ZP
BH5/16025(GR5)ZP
BH5/16032(GR5)ZP
BH5/16038(GR5)ZP
BH5/16050(GR5)ZP
BH5/16064(GR5)ZP
BH3/8020(GR5)ZP
BH3/8025(GR5)ZP
BH3/8032(GR5)ZP
BH3/8038(GR5)ZP
BH3/8045(GR5)ZP
BH3/8050(GR5)ZP
BH3/8064(GR5)ZP
BH3/8075(GR5)ZP
BH7/16050(GR5)ZP
BLACK
-
BH5/16025(GR5)BL
BH5/16032(GR5)BL
-
-
-
-
BH3/8025(GR5)BL
-
-
-
-
-
-
-
BOLTS - HIGH TENSILE
HEX BOLTS - IMPERIAL
1/4 - 5/16" UNC
GRADE 8
FINISHES: Zinc Plated (Silver) / Zinc Yellow / Black
Hexagonal heads and machine threads for use with a nut or in a tapped hole.
SIZE
CODE
1/4 x 1/2"
1/4 x 3/4"
1/4 x 1"
1/4 x 1-1/4"
1/4 x 1-1/2"
1/4 x 1-3/4" 1/4 x 2"
1/4 x 2-1/4"
1/4 x 2-1/2"
1/4 x 3"
5/16"
5/16 x 1/2"
5/16 x 3/4"
5/16 x 1"
5/16 x 1-1/4"
5/16 x 1-1-2"
5/16 x 1-3/4"
5/16 x 2"
5/16 x 2-1/4"
5/16 x 2-1/2"
5/16 x 2-3/4"
5/16 x 3"
BH1/4012ZP
BH1/4020ZP
BH1/4025ZP
BH1/4032ZP
BH1/4038ZP
BH1/4045ZP
BH1/4050ZP
BH1/4057ZP
BH1/4064ZP
BH1/4075ZP
BH5/16012ZP
BH5/16020ZP
BH5/16025ZP
BH5/16032ZP
BH5/16038ZP
BH5/16045ZP
BH5/16050ZP
BH5/16057ZP
BH5/16064ZP
BH5/16070ZP
BH5/16075ZP
1/4"
ZINC
Z/YELLOW
-
BH1/4020ZY
BH1/4025ZY
-
BH1/4038ZY
-
BH1/4050ZY
-
-
BH1/4075ZY
-
BH5/16020ZY
BH5/16025ZY
-
BH5/16038ZY
-
-
-
-
-
-
BLACK
-
-
BH1/4025BL
-
-
-
-
-
-
-
-
-
BH5/16025BL
-
-
-
-
-
-
-
-
17
BOLTS - HIGH TENSILE
HEX BOLTS - IMPERIAL
3/8 - 1/2" UNC
GRADE 8
FINISHES: Zinc Plated (Silver) / Zinc Yellow / Black
Hexagonal heads and machine threads for use with a nut or in a tapped hole.
SIZE
3/8"
18
3/8 x 1/2"
3/8 x 3/4"
3/8 x 1"
3/8 x 1-1/4"
3/8 x 1-1/2"
3/8 x 1-3/4"
3/8 x 2"
3/8 x 2-1/4"
3/8 x 2-1/2"
3/8 x 2-3/4"
3/8 x 3"
3/8 x 3-1/4"
3/8 x 3-1/2"
3/8 x 4"
7/16"
7/16 x 1"
7/16 x 1-1/2"
7/16 x 2"
1/2"
1/2 x 3/4"
1/2 x 1"
1/2 x 1-1/4"
1/2 x 1-1/2"
1/2 x 1-3/4"
1/2 x 2"
1/2 x 2-1/4"
1/2 x 2-1/2"
CODE
ZINC
BH3/8012ZP
BH3/8020ZP
BH3/8025ZP
BH3/8032ZP
BH3/8038ZP
BH3/8045ZP
BH3/8050ZP
BH3/8057ZP
BH3/8065ZP
BH3/8070ZP
BH3/8075ZP
BH3/8082ZP
BH3/8089ZP
BH3/8100ZP
BH7/16025ZP
BH7/16038ZP
BH7/16050ZP
BH1/2020ZP
BH1/2025ZP
BH1/2032ZP
BH1/2038ZP
BH1/2045ZP
BH1/2050ZP
BH1/2056ZP
BH1/2064ZP
Z/YELLOW
-
-
BH3/8025ZY
BH3/8032ZY
BH3/8038ZY
BH3/8045ZY
BH3/8050ZY
-
-
-
BH3/8075ZY
-
-
-
-
BH7/16038ZY
BH7/16050ZY
-
BH1/2025ZY
-
BH1/2038ZY
-
BH1/2050ZY
-
-
BLACK
-
BH3/8020BL
BH3/8025BL
BH3/8032BL
BH3/8038BL -
-
-
-
-
-
-
-
-
-
-
-
-
BH1/2025BL
BH1/2032BL
BH1/2038BL
BH1/2045BL
BH1/2050BL
-
-
BOLTS - HIGH TENSILE
HEX BOLTS - IMPERIAL
1/2 - 3/4" UNC
GRADE 8
FINISHES: Zinc Plated (Silver) / Zinc Yellow / Black
Hexagonal heads and machine threads for use with a nut or in a tapped hole.
SIZE
CODE
1/2 x 3"
1/2 x 3-1/4"
1/2 x 3-1/2"
1/2 x 4"
1/2 x 4-1/2"
1/2 x 5"
1/2 x 6"
1/2 x 7-1/4"
1/2 x 7-1/2"
5/8"
5/8 x 1-1/2"
5/8 x 2"
5/8 x 2-1/4"
5/8 x 2-1/2"
5/8 x 2-3/4"
5/8 x 3"
5/8 x 3-1/2"
5/8 x 4"
5/8 x 4-1/2"
3/4"
3/4 x 1-1/2"
3/4 x 1-3/4"
3/4 x 2"
3/4 x 2-1/2"
3/4 x 3"
3/4 x 3-1/2"
BH1/2075ZP
BH1/2082ZP
BH1/2089ZP
BH1/2100ZP
BH1/2112ZP
BH1/2125ZP
BH1/2150ZP
BH1/2181ZP
BH1/2187ZP
1/2"
ZINC
BH5/8038ZP
BH5/8050ZP
BH5/8057ZP
BH5/8064ZP
BH5/8070ZP
BH5/8075ZP
BH5/8089ZP
BH5/8100ZP
BH5/8112ZP
BH3/4038ZP
BH3/4045ZP
BH3/4050ZP
BH3/4064ZP
BH3/4075ZP
BH3/4089ZP
Z/YELLOW
-
-
-
-
-
-
-
-
-
-
BH5/8050ZY
-
BH5/8064ZY
-
-
-
-
-
-
-
-
-
-
-
BLACK
BH1/2075BL
-
-
BH1/2100BL
-
-
-
-
-
-
BH3/8050BL
BH3/8057BL
BH3/8064BL
BH3/8070BL
BH3/8075BL
-
-
-
BH3/4038BL
BH3/4045BL -
BH3/4064BL
BH3/4075BL
-
19
BOLTS - HIGH TENSILE
HEX BOLTS - IMPERIAL
3/4 - 1-1/4" UNC
GRADE 8
FINISHES: Zinc Plated (Silver) / Zinc Yellow / Black
Hexagonal heads and machine threads for use with a nut or in a tapped hole.
SIZE
CODE
3/4 x 4"
3/4 x 4-1/2"
3/4 x 5"
3/4 x 6"
7/8"
7/8 x 3-1/2"
7/8 x 4"
BH3/4100ZP
BH3/4112ZP
BH3/4125ZP
BH3/4150ZP
-
-
-
-
-
-
-
3/4"
1"
1" x 3-1/2"
1" x 4" 1" x 5-1/2" 1-1/4"
1-1/4 x 5"
1-1/4 x 5-1/2" ZINC
Z/YELLOW
-
-
-
-
BH7/8089ZY
-
-
-
-
-
-
ALKON IS AN OFFICIAL DISTRIBUTOR OF:
ENGINEERING ADHESIVES & SEALANTS FOR:
- LUBRICATION & PROTECTION
- RETAINING
- GASKETING
... AND MUCH MORE!
- THREADLOCKING
20
- STRUCTURAL BONDING
BLACK
BH3/4100BL
BH3/4112BL
-
BH3/4150BL
-
BH7/16100BL
BH1"089BL
BH1"100BL
BH1"137BL
BH1.1/4125BL
BH1.1/4137BL
BOLTS - HIGH TENSILE
HEX BOLTS - IMPERIAL
1/4 - 3/8" UNF
GRADE 5
FINISH: Zinc Plated (Silver)
Hexagonal heads and machine threads for use with a nut or in a tapped hole.
SIZE
CODE
1/4 x 3/4"
1/4 x 1"
5/16"
5/8 x 1-1/2"
3/8"
3/8 x 1"
3/8 x 2"
BJ1/4020(GR5)ZP
BJ1/4025(GR5)ZP
BJ5/16038(GR5)ZP BJ3/8025(GR5)ZP
BJ3/8050(GR5)ZP
ZINC
1/4"
1/2 - 1-1/4" UNF
GRADE 8
FINISHES: Zinc Plated (Silver) / Zinc Yellow / Black
Hexagonal heads and machine threads for use with a nut or in a tapped hole.
SIZE
CODE
1/4 x 5/8"
1/2"
1/2 x 1-1/4"
1/2 x 1-1/2"
1/2 x 1-3/4"
1/2 x 2"
1/2 x 2-1/4"
1-1/4"
1-1/4 x 14"
-
1/4"
ZINC
BJ1/2032ZP
BJ1/2038ZP
BJ1/2045ZP
BJ1/2050ZP
BJ1/2057ZP
-
Z/YELLOW
BJ1/4016ZY
-
BJ1/2038ZY
-
-
-
-
BLACK
-
-
-
-
-
-
BJ1.1/4350BL
21
BOLTS - HIGH TENSILE
HEX HEAD SCREWBOLTS - METRIC
M10
CASE HARDENED
FINISHES: Zinc Plated (Silver) / Galvanised
Universal anchor for fixing into multiple substrates (wood, brick, concrete etc).
SIZE
M10 x 60mm
M10 x 75mm
M10 x 100mm
M10 x 120mm
M10 x 150mm
22
CODE
ZINC
AZ10060ZP
AZ10075ZP AZ10100ZP
AZ10120ZP
AZ10150ZP
GALVANISED
AZ10060GA
AZ10075GA
AZ10100GA
AZ10120GA
AZ10150GA
SET SCREWS - HIGH TENSILE
HEX SET SCREWS - METRIC
M4 - M10
CLASS 8.8
FINISHES: Zinc Plated (Silver) / Black
Hexagonal headed bolt that is fully threaded.
SIZE
M4
M4 x 16mm M6
M6 x 12mm
M6 x 16mm M6 x 20mm
M6 x 25mm
M6 x 30mm
M6 x 35mm
M8
M8 x 16mm
M8 x 20mm M8 x 25mm
M8 x 30mm M8 x 35mm
M8 x 40mm M8 x 45mm
M10
M10 x 20mm
M10 x 25mm M10 x 30mm
M10 x 35mm M10 x 40mm
M10 x 50mm M10 x 60mm
M10 x 75mm M10 x 85mm
M10 x 90mm CODE
ZINC
BQ0416ZP
BQ0612ZP
BQ0616ZP
BQ0620ZP
BQ0625ZP
BQ0630ZP
BQ0635ZP
BQ0816ZP
BQ0820ZP
BQ0825ZP
BQ0830ZP
BQ0835ZP
BQ0840ZP
BQ0845ZP
BQ1020ZP
BQ1025ZP
BQ1030ZP
BQ1035ZP
BQ1040ZP
BQ1050ZP
BQ1060ZP
BQ1075ZP
BQ1085ZP
BQ1090ZP
BLACK
-
-
BQ0616BL
BQ0620BL
BQ0625BL
-
-
-
BQ0820BL
BQ0825BL
-
-
-
-
BQ1020BL
BQ1025BL
BQ1030BL
BQ1035BL
BQ1040BL
BQ1050BL
BQ1060BL
-
-
-
23
SET SCREWS - HIGH TENSILE
HEX SET SCREWS - METRIC
M10 - M24
CLASS 8.8
FINISHES: Zinc Plated (Silver) / Black
Hexagonal headed bolt that is fully threaded.
SIZE
M12
24
M12 x 20mm M12 x 25mm
M12 x 30mm M12 x 35mm
M12 x 40mm M12 x 45mm
M12 x 50mm M12 x 55mm
M12 x 60mm M12 x 65mm
M12 x 75mm M12 x 80mm
M12 x 100mm
M16
M16 x 25mm
M16 x 35mm
M16 x 45mm M16 x 40mm
M16 x 50mm
M16 x 60mm M16 x 70mm
M20
M20 x 40mm
M20 x 50mm
M20 x 55mm
M20 x 60mm
M24
M24 x 50mm
M36
M36 x 75mm
M36 x 80mm
CODE
ZINC
BQ1220ZP
BQ1225ZP
BQ1230ZP
BQ1235ZP
BQ1240ZP
BQ1245ZP
BQ1250ZP
BQ1255ZP
BQ1260ZP
BQ1265ZP
BQ1275ZP
-
BQ12100ZP
BQ1625ZP
BQ1635ZP
BQ1645ZP
BQ1640ZP
BQ1650ZP
BQ1660ZP
BQ1670ZP
BQ2040ZP
BQ2050ZP
BQ2055ZP
BQ2060ZP
-
-
-
BLACK
-
BQ1225BL
BQ1230BL
BQ1235BL
BQ1240BL
-
BQ1250BL
-
-
-
-
BQ1280BL
-
-
-
-
BQ1640BL
BQ1650BL
-
-
-
BQ2050BL
-
-
BQ2450BL
BQ3675BL
BQ3680BL
SET SCREWS - HIGH TENSILE
HEX SET SCREWS - IMPERIAL
1/4" UNC
GRADE 5
FINISHES: Zinc Plated (Silver) / Black
Hexagonal headed bolt that is fully threaded.
SIZE
1/4
1/4 x 1/2" 1/4 x 1"
CODE
ZINC
BK1/4012(GR5)ZP -
BLACK
-
BK1/4025(GR5)BL
5/16 - 3/8" UNF
GRADE 5
FINISHES AVAILABLE: Zinc Plated (Silver)
Hexagonal headed bolt that is fully threaded.
SIZE
5/16
5/16 x 1" 3/8
3/8 x 1-1/4"
CODE
ZINC
BR5/16025(GR5)ZP
BR3/8032(GR5)ZP DID YOU KNOW?
UP TO 3/8", BSW AND UNC THREADS ARE COMPLETELY INTERCHANGEABLE.
SO APART FROM MINOR A.F. DIFFERENCES, YOU CAN USE EITHER ONE!
25
NUTS
HEX NUTS - METRIC
M3 - M36
STANDARD PITCH
FINISHES: Zinc Plated (Silver) / Galvanised / Black
Hexagonal nut with internal machine thread to be fitted onto a bolt/set screw.
SIZE
M3 M4 M5 M6 M8 M10 M12 M16 M20 M24 M30 M36 CODE
ZINC
ND03ZP
ND04ZP
ND05ZP
ND06ZP
ND08ZP
ND10ZP
ND12ZP
ND16ZP
ND20ZP
ND24ZP
ND30ZP
-
GALVANISED
-
-
-
ND06GA
ND08GA
ND10GA
ND12GA
ND16GA
ND20GA
ND24GA
ND30GA
-
BLACK
-
-
-
ND06BL
ND08BL
ND10BL
ND12BL
ND16BL
ND20BL
ND24BL
ND30BL
ND36BL
M5 - M6
STANDARD PITCH
FINISH: Stainless Steel 304
Hexagonal nut with internal machine thread to be fitted onto a bolt/set screw.
SIZE
M5 M4 26
CODE
STAINLESS 304
ND05SS
ND06SS
NUTS
HEX NUTS - IMPERIAL
1/8 - 3/8" BSW | 3/16" UNC
STANDARD PITCH
FINISHES: Zinc Plated (Silver) / Stainless Steel 304
Hexagonal nut with internal machine thread to be fitted onto a bolt/set screw.
SIZE
BSW
1/8"
5/32"
3/16"
1/4"
5/16"
3/8"
UNC
3/16" (10-24)
CODE
STAINLESS 304
ZINC
-
-
-
-
-
-
NB3/16SS
NA1/8ZP
NA5/32ZP
NA3/16ZP
NA1/4ZP
NA5/16ZP
NA3/8ZP
NB3/16ZP
HEX NUTS - HEAVY SERIES
3/4" UNF
GRADE 2H
FINISH: Black
For use with bolts in high-pressure and high-temperature applications.
SIZE
CODE
3/4"
NC3/4BL
BLACK
27
NUTS
FLANGE SERRATED LOCKING NUTS - METRIC
M4 - M12
FINISHES: Zinc Plated (Silver) / Zinc Yellow
Nut with a built in washer and serrated underhead to resist loosening.
SIZE
CODE
ZINC
M4 M5 M6 M8 M10 M12 -
-
-
NP08ZP
-
-
Z/YELLOW
NP04ZY
NP05ZY
NP06ZY
NP08ZY
NP10ZY
NP12ZY
NYLON INSERT LOCKING NUTS - METRIC
M3 - M18
FINISHES: Zinc Plated (Silver) / Zinc Yellow / Stainless Steel 304
Hex nut with a nylon ring to resist loosening.
SIZE
M03 M04 M05 M06 M08 M10 M18 28
CODE
ZINC
-
-
-
-
-
-
NK18ZP
Z/YELLOW
NK03ZY
NK04ZY
NK05ZY
NK06ZY
NK08ZY
NK10ZY
-
STAINLESS
-
-
-
NK06SS
NK08SS
-
-
NUTS
NYLON INSERT LOCKING NUTS - IMPERIAL
3/16 - 1/4" UNC
FINISH: Zinc Yellow
Hex nut with a nylon ring to resist loosening.
SIZE
CODE
3/16"
1/4"
NI3/16ZY
NI1/4ZY
Z/YELLOW
WING NUTS - METRIC
M3 - M8
FINISH: Zinc Plated (Silver)
Threaded nuts that are easily installed by hand.
SIZE
CODE
M3
M4
M5
M6
M8
NT03ZP
NT04ZP
NT05ZP
NT06ZP
NT08ZP
ZINC
29
NUTS
WING NUTS - IMPERIAL
3/16 - 5/16"
FINISHES: Zinc Plated (Silver) / Stainless Steel 304
Threaded nuts that are easily installed by hand.
CODE
SIZE
STAINLESS 304
3/16"
NT3/16SS
-
-
1/4"
5/16"
ZINC
NT3/16ZP
NT1/4ZP
NT5/16ZP
TEE NUTS - METRIC
M4 - M10
4-PRONG FOR TIMBER
FINISH: Zinc Plated (Silver)
Used to create internal machine threads in wood, timber or similar materials.
SIZE
CODE
BARREL LENGTH
DIAMETER
M4 x 7mm
M5 x 7mm
M6 x 7mm
M8 x 9mm
M8 x 16mm
M10 x 11mm
30
x 15mm
x 15mm
x 18mm
x 22mm
x 22mm
x 25mm
ZINC
NN0407ZP
NN0507ZP
NN0607ZP
NN0809ZP
NN0816ZP
NN1011ZP
NUTS
TEE NUTS - IMPERIAL
3/16 - 3/8" BSW
4-PRONG FOR TIMBER
FINISH: Zinc Plated (Silver)
Used to create internal machine threads in wood, timber or similar materials.
CODE
SIZE
BARREL LENGTH
DIAMETER
3/16" x 7mm
x 18mm
1/4" x 7mm
5/16" x 9mm
5/16" x 16mm
3/8" x 11mm
x 18mm
x 22mm
x 22mm
x 25mm
ZINC
NN3/1607ZP
NN1/407ZP
NN5/1609ZP
NN5/1616ZP
NN3/811ZP
ALKON PROVIDES A WIDE RANGE OF
CUSTOM PLATED FASTENERS
- ZINC PLATED (SILVER/BLUE)
- ELECTRO BRASS
- ZINC YELLOW
- FLORENTINE BRONZE
- BLACK ZINC (BLACK OXIDE)
- BRIGHT NICKEL
- MECHANICAL GALVANISED
AND MORE!
CAN'T FIND THE FINISH OF BOLT, NUT OR WASHER?
ANY FASTENER, ANY FINISH. WE CAN PLATE IT!
31
WASHERS
FLAT WASHERS - METRIC
M6 - M16
ZINC
FINISHES: Zinc Plated (Silver) / Zinc Trivalent (Cr 3) / Zinc Yellow
Increases the effective bearing surface of the bolt & minimises damage to materials.
SIZE
M3
M4
M5
M6 M8
M8 M8 M10 M12 M16 M16
M10
M12
M10
CODE
OUTSIDE DIAM.
x 7.0
x 9.0
x 10.0
x 12.5
x 17.0
x 17.0
x 21.0
x 21.0
x 28.0
x 30.0
x 38.0
x 23.0
x 28.0
x 21.0
GAUGE
x 0.5mm
x 0.8mm
x 1.0mm
x 1.2mm
x 1.2mm
x 1.6mm
x 2.0mm
x 1.6mm
x 2.5mm
x 2.0mm
x 2.5mm
x 2.0mm
x 2.5mm
x 1.6mm
ZINC
WA03070.5ZP
WA04090.8ZP
WA05101.0ZP
WA0612.51.2ZP
WA08171.2ZP
WA08171.6ZP
WA08212.0ZP
WA10211.6ZP
WA12282.5ZP
WA16302.0ZP
WA16382.5ZP
TRIVALENT
WA10232.0(TRIVALENT)ZP
WA12282.5(TRIVALENT)ZP
ZINC YELLOW
WA10211.6ZY
M6 - M16
GALVANISED
Increases the effective bearing surface of the bolt & minimises damage to materials.
SIZE
M8
M10 M12
M12
M16 32
CODE
OUTSIDE DIAM.
x 20.0
x 23.0
x 28.0
x 37.0
x 38.0
GAUGE
x 1.6mm
x 2.0mm
x 2.5mm
x 3.0mm
x 3.0mm
GALVANISED
WA08201.6GA
WA10232.0GA
WA12282.5GA
WA12373.0GA
WA16383.0GA
WASHERS
FLAT WASHERS - METRIC
M3 - M12
STAINLESS STEEL 304
Increases the effective bearing surface of the bolt & minimises damage to materials.
SIZE
M3 M4
M5 M6 M8 M10
M12 OUTSIDE DIAM.
x 7.0
x 9.0
x 10.0
x 12.5
x 17.0
x 21.0
x 24.0
CODE
STAINLESS 304 GAUGE
x 0.5mm
x 0.8mm
x 0.8mm
x 1.2mm
x 1.2mm
x 1.2mm
x 1.5mm
WA03070.5SS
WA04090.8SS
WA05100.8SS
WA0612.51.2SS
WA08171.2SS
WA10211.2SS
WA12241.5SS
FLAT WASHERS - IMPERIAL
1/8 - 5/16"
ZINC PLATED (SILVER) / ZINC YELLOW
Increases the effective bearing surface of the bolt & minimises damage to materials.
SIZE
1/8
1/8
5/32 3/16
3/16 3/16
1/4
1/4 5/16 5/16
5/16
OUTSIDE DIAM.
x 3/8
x 5/8
x 7/16
x 7/16
x 1/2
x 5/8
x 1/2
x 5/8
x 5/8
x 3/4
x 3/4
GAUGE
x 20g
x 18g
x 20g
x 20g
x 20g
x 18g
x 18g
x 18g
x 18g
x 16g
x 18g
CODE
ZINC YELLOW
-
-
-
-
-
-
-
-
-
-
WA5/162018ZY
ZINC
WA1/81020ZP
WA1/81618ZP
WA5/321120ZP
WA3/161120ZP
WA3/161220ZP
WA3/161618ZP
WA1/41218ZP
WA1/41618ZP
WA5/161618ZP
WA5/162016ZP
WA5/162018ZP
33
WASHERS
FLAT WASHERS - IMPERIAL
3/8 - 5/8"
ZINC
Increases the effective bearing surface of the bolt & minimises damage to materials.
SIZE
3/8 3/8
3/8
7/16
1/2 9/16
5/8 CODE
OUTSIDE DIAM.
x 3/4
x 3/4
x 1-1/4
x 7/8
x 1
x 1-1/8
x 1-1/4
GAUGE
x 16g
x 18g
x 16g
x 16g
x 16g
x 16g
x 15g
ZINC
WA3/82016ZP
WA3/82018ZP
WA3/83216ZP
WA7/162216ZP
WA1/22516ZP
WA9/162816ZP
WA5/83215ZP
1/4 - 5/16"
STAINLESS STEEL 304
Increases the effective bearing surface of the bolt & minimises damage to materials.
SIZE
1/4 3/16
5/16 CODE
OUTSIDE DIAM.
x 5/8
x 7/16
x 3/4
GAUGE
x 18g
x 20g
x 18g
STAINLESS 304 WA1/41618SS
WA3/161120SS
WA5/162012SS
3/16"
BLACK ZINC
Increases the effective bearing surface of the bolt & minimises damage to materials.
SIZE
3/16 34
CODE
OUTSIDE DIAM. GAUGE
x 1/2
x 20g
BLACK ZINC
WA3/161220BZ
WASHERS
MUDGUARD WASHERS - IMPERIAL
3/16 - 5/16"
ZINC
FINISHES: Zinc Plated (Silver) / Zinc Yellow
Flat washers with an oversized outside diameter.
SIZE
3/16 1/4
1/4
1/4 1/4
5/16 1/4
OUTSIDE DIAM.
x 3/4
x 3/4
x 3/4
x 1
x 1-1/4
x 1
x 3/4
GAUGE
x 18g
x 16g
x 18g
x 16g
x 16g
x 16g
x 18g
CODE
ZINC
WB3/162018ZP
WB1/42016ZP
WB1/42018ZP
WB1/42516ZP
WB1/43216ZP
WB5/162516ZP
ZINC YELLOW
WB1/42018ZY
3/8"
GALVANISED
Flat washers with an oversized outside diameter.
SIZE
3/8 OUTSIDE DIAM. GAUGE
x 1
x 16g
CODE
GALVANISED
WB3/82516GA
3/8"
STAINLESS STEEL 304
Flat washers with an oversized outside diameter.
SIZE
3/8 OUTSIDE DIAM. GAUGE
x 1
x 16g
CODE
STAINLESS 304
WB3/82516SS
35
WASHERS
HARDENED WASHERS - METRIC
M12
ZINC
For use in high tensile joints where bolt tension is important.
SIZE
M12
M12
CODE
ZINC
OUTSIDE DIAM. GAUGE
x 24.0
x 1.6mm
x 28.5
x 2.5mm
WO12241.6ZP
WO1228.52.5ZP
HARDENED WASHERS - IMPERIAL
1/4 - 3/4"
ZINC
FINISHES: Zinc Plated (Silver) / Zinc Yellow
For use in high tensile joints where bolt tension is important.
SIZE
5/16
3/8
1/2
5/8
1/4
5/16
3/8
7/16
1/2
5/8
3/4
36
OUTSIDE DIAM.
x 17.00
x 20.62
x 28.00
x 33.00
x 15.88
x 17.00
x 20.64
x 23.00
x 27.00
x 33.33
x 38.00
GAUGE
x 2.00mm
x 2.00mm
x 3.00mm
x 3.00mm
x 2.00mm
x 2.00mm
x 1.60mm
x 2.00mm
x 2.80mm
x 3.00mm
x 3.20mm
CODE
ZINC
WO5/16172.0ZP
WO3/820.622.0ZP
WO1/228.03.0ZP
WO5/833.03.0ZP
ZINC YELLOW
WO1/415.882.00ZY
WO5/16172.0ZY
WO3/820.641.6ZY
WO7/1623.02.0ZY
WO1/227.02.8ZY
WO5/833.03.0ZY
WO3/438/3.2ZY
WASHERS
SPRING WASHERS - METRIC
M4 - M12
FLAT/MEDIUM SECTION
FINISHES: Zinc Plated (Silver) / Zinc Trivalent (Cr 3) / Stainless Steel 304
Helps lock the nut/bolt to the joint and prevent loosening.
SIZE
CODE
ZINC
M6
M8
M10
WD06ZP
WD08ZP
ZINC TRIVALENT
WD10(TRIVALENT)ZP
STAINLESS 304
M4
M12
WD04SS
WD12SS
SPRING WASHERS - IMPERIAL
1/4 - 1/2"
FLAT/MEDIUM SECTION
FINISH: Zinc Plated (Silver)
Helps lock the nut/bolt to the joint and prevent loosening.
SIZE
1/4
5/16
3/8
7/16
1/2
OUTSIDE DIAM.
x 3/32
x 1/8
x 1/8
x 5/32
x 3/16
GAUGE
x 1/16
x 5/64
x 3/32
x 3/32
x 1/8
CODE
ZINC
WE1/4X3/32X1/16ZP
WE5/16X1/8X5/64ZP
WE3/8X1/8X3/32ZP
WE7/16X5/32X3/32ZP
WE1/2X3/16X18ZP
37
WASHERS
SHAKEPROOF (LOCK) WASHERS - METRIC
M4
INTERNAL
FINISH: Stainless Steel 304
Uses internal teeth to help prevent loosening.
SIZE
CODE
STAINLESS 304
M4
WF04SS
SHAKEPROOF (LOCK) WASHERS - IMPERIAL
3/16 - 3/8"
INTERNAL
FINISH: Zinc Plated (Silver)
Uses internal teeth to help prevent loosening.
SIZE
CODE
ZINC
3/16
3/8
WF3/16ZP
WF3/8ZP
ALKON IS AN OFFICIAL DISTRIBUTOR OF:
ENGINEERING ADHESIVES & SEALANTS FOR:
- LUBRICATION & PROTECTION
- RETAINING
- GASKETING
... AND MUCH MORE!
- THREADLOCKING
38
- STRUCTURAL BONDING
WASHERS
SQUARE WASHERS - METRIC
M12 - M20
ZINC / GALVANISED
Washer with a large square profile, thicker than standard washers.
SIZE
M20
M12
CODE
OUTSIDE DIAM.
x 75 x 75
x 50 x 50
THICKNESS
x 5.0mm
x 3.0mm
ZINC
WT2075755.0ZP
GALVANISED
WT2050503.0ZP
WAVE WASHERS - IMPERIAL
3/8"
ZINC TRIVALENT (CR3)
Washer with a wave profile to provide a preload between two surfaces.
SIZE
CODE
ZINC TRIVALENT
3/8
WY3/8ZP
39
BOLTS - LOW TENSILE
HEX BOLT & NUT - METRIC
M8 - M12
CLASS 4.6
FINISH: Zinc Plated (Silver)
Hexagonal head bolt and matching nut packaged together.
SIZE
CODE
ZINC
M8 x 25mm M10 x 25mm M10 x 30mm (Full Thread)
M12 x 65mm
BF0825ZP
BF10025ZP
BF10030ZP
BF12065ZP
COACH BOLT & NUT - METRIC
M10 - M12
CLASS 4.6
FINISH: Zinc Plated (Silver) / Galvanised
Mild steel, Cup head bolts with a built-in hex nut & packed with nuts to suit.
SIZE
CODE
M10 x 30mm
M10 x 280mm M12
M12 x 65mm M12 x 90mm
M12 x 100mm M12 x 130mm
CB10030ZP
-
-
-
-
-
M10
40
ZINC
GALVANISED
-
CB10280GA
CB12065GA
CB12090GA
CB12100GA
CB12130GA
BOLTS - LOW TENSILE
COACH BOLT & NUT - IMPERIAL
5/16"
CLASS 4.6
FINISH: Zinc Plated (Silver)
Mild steel, Cup head bolts with a built-in hex nut & packed with nuts to suit.
SIZE
CODE
5/16 x 1"
5/16 x 2"
5/16 x 2-1/2"
5/16 x 4"
CB5/16025ZP
CB5/16050ZP
CB5/16064ZP
CB5/16100ZP
ZINC
FLANGE PURLIN BOLTS - METRIC
M12
CLASS 4.6
FINISH: Zinc Plated (Silver)
Mild steel bolt & matching nut for securing steel purlins.
SIZE
M12 x 30mm
CODE
ZINC
BN1230ZP
41
SET SCREWS - LOW TENSILE
HEX SET SCREWS - METRIC
M6 - M12
CLASS 4.6
FINISH: Zinc Plated (Silver) / Stainless Steel 304 / Stainless Steel 316
Mild steel, heaxagonal head bolts that are fully threaded.
SIZE
M6
M6 x 12mm
M6 x 16mm
M6 x 20mm
M6 x 25mm
M6 x 30mm
M6 x 40mm
M8
M8 x 16mm
M8 x 20mm
M8 x 25mm
M8 x 30mm
M10
M10 x 25mm
M10 x 30mm
M10 x 35mm
M12
M12 x 100mm
42
S.S. 304
-
-
BE0620SS
-
BE0630SS
-
-
BE0820SS
BE0825SS
BE0830SS
-
-
-
-
S.S. 316
-
-
-
-
-
-
-
-
-
-
BE1025(316)SS
-
-
-
CODE
ZINC
BE0612ZP
BE0616ZP
BE0620ZP
BE0625ZP
BE0630ZP
BE0640ZP
BE0816ZP
BE0820ZP
BE0825ZP
BE0830ZP
-
BE10030ZP
BE10035ZP
BE12100ZP
WWW.ALKON.COM.AU WWW.ALKON.COM.AU WW
OM.AU WWW.ALKON.COM.AU WWW.ALKON.COM
BOLTS - LOW TENSILE
WWW.ALKON.COM.AU
WWW.ALKON.COM.AU WW
OM.AU WWW.ALKON.COM.AU WWW.ALKON.COM
WWW.ALKON.COM.AU WWW.ALKON.COM.AU WW
UT - METRIC
OM.AU WWW.ALKON.COM.AU WWW.ALKON.COM
WWW.ALKON.COM.AU WWW.ALKON.COM.AU WW
OM.AU
WWW.ALKON.COM.AU
For the latest pricing andWWW.ALKON.COM
info on our
M
WWW.ALKON.COM.AU
WWW.ALKON.COM.AU
WW
products and
services go to:
CLASS 4.6
OM.AU
WWW.ALKON.COM.AU WWW.ALKON.COM
FINISH: Zinc Plated (Silver)
WWW.ALKON.COM.AU
WWW.ALKON.COM.AU WW
For .
CODE
OM.AUSIZEWWW.ALKON.COM.AU
WWW.ALKON.COM
WWW.ALKON.COM.AU
M
ZINC
WWW.ALKON.COM.AU
WWW.ALKON.COM.AU
WW
M x mm BFZP
OM.AU
WWW.ALKON.COM.AU WWW.ALKON.COM
M x mm BFZP
WWW.ALKON.COM.AU WWW.ALKON.COM.AU WW
OM.AU WWW.ALKON.COM.AU WWW.ALKON.COM
WWW.ALKON.COM.AU WWW.ALKON.COM.AU WW
OM.AU WWW.ALKON.COM.AU WWW.ALKON.COM
WWW.ALKON.COM.AU WWW.ALKON.COM.AU WW
OM.AU WWW.ALKON.COM.AU WWW.ALKON.COM
WWW.ALKON.COM.AU WWW.ALKON.COM.AU WW
OM.AU WWW.ALKON.COM.AU WWW.ALKON.COM
WWW.ALKON.COM.AU WWW.ALKON.COM.AU WW
OM.AU WWW.ALKON.COM.AU WWW.ALKON.COM
WWW.ALKON.COM.AU WWW.ALKON.COM.AU WW
OM.AU WWW.ALKON.COM.AU WWW.ALKON.COM
WWW.ALKON.COM.AU WWW.ALKON.COM.AU WW
OM.AU WWW.ALKON.COM.AU WWW.ALKON.COM
WWW.ALKON.COM.AU WWW.ALKON.COM.AU WW
OM.AU WWW.ALKON.COM.AU WWW.ALKON.COM
WWW.ALKON.COM.AU WWW.ALKON.COM.AU WW
OM.AU WWW.ALKON.COM.AU WWW.ALKON.COM
WWW.ALKON.COM.AU WWW.ALKON.COM.AU WW
43
OM.AU WWW.ALKON.COM.AU WWW.ALKON.COM
WWW.ALKON.COM.AU WWW.ALKON.COM.AU WW
Terms and Condi-
THREAD GUIDE - Section 1
44
THREAD GUIDE - Section 2
45
TERMS & CONDITIONS
TermsandConditions
ALKON WARRANTY
On: "ALKOTE Class 3" & "ALKOTE Class 4" products.
'Alkon' warranties their "ALKOTE Class 3" and"ALKOTE Class 4" Mechanical
Galvanised screws against the loss of structural integrity due to the effects of
corrosion or metallurgical defects, provided that:
(1)
(2)
(3)
The screws are used with compatible roofing and substrate material.
The "ALKOTE" screws shall be clearly marked with the 'AK' head
marking, and have been correctly installed.
The "ALKOTE" srews are installed in an environment recommended
by the standards as suitable for AS3566 Class 3 and Class 4 screws.
Under this warranty, Alkon undertakes to replace
any defective screws at no additional cost.
A.C.N. 106 493 547
This warranty is issued by Alkon Sales Pty Ltd. A.B.N. 49 109 493 547
GENERAL TERMS AND CONDITIONS
The products featured in this list represent some of the most popular fasteners in use today. Alkons quality is second to none. Samples of any item can
be provided for your assessment. All stock is inspected and batch numbered for traceability. Every effort is made to ensure availability of our imported
stock, however, stock shortages are unavoidable. Back orders are kept at customers request.
DISCOUNTS FOR QUANTITY BUYS OR STOCK ORDERS
FREIGHT TERMS
INTERSTATE CAPITALS - EX MELBOURNE
NEW SOUTH WALES
FOR F.I.S. - $250 MINIMUM ORDER VALUE
SOUTH AUSTRALIA
FOR F.I.S. - $250 MINIMUM ORDER VALUE
WESTERN AUSTRALIA
FOR F.I.S. - $500 MINIMUM ORDER VALUE
TASMANIA
FOR F.I.S. - $200 MINIMUM ORDER VALUE
OTHER AREAS BY NEGOTIATION, DEPENDANT ON ORDER VALUE
F.O.B. CHARGE $30.00
F.O.B. CHARGE $30.00
F.O.B. CHARGE $50.00
F.O.B. CHARGE $20.00
COUNTRY VICTORIA
MELBOURNE METRO
F.O.B. CHARGE $20.00
F.O.B. CHARGE $10.00
FOR F.I.S. - $200 MINIMUM ORDER VALUE
FOR F.I.S. - $100 MINIMUM ORDER VALUE
INTERSTATE CAPITALS - EX BRISBANE
46
BRISBANE METRO
FOR F.I.S. - $100 MINIMUM ORDER VALUE
GOLD / SUNSHINE COAST
FOR F.I.S. - $200 MINIMUM ORDER VALUE
QLD COUNTRY
FOR F.I.S. - $500 MINIMUM ORDER VALUE
SYDNEY & NORTHERN RIVER
FOR F.I.S. - $250 MINIMUM ORDER VALUE
(INCL. NEWCASTLE)
OTHER AREAS BY NEGOTIATION, DEPENDANT ON ORDER VALUE
F.O.B. CHARGE $10.00
F.O.B. CHARGE $20.00
F.O.B. CHARGE $50.00
F.O.B. CHARGE $30.00
TERMS & CONDITIONS
All goods are supplied by the Company on the terms and conditions set
out herein and no addition or variation to these terms and conditions will
have any effect unless expressly agreed in writing by a Director of the
company.
1. Quotations
a)Quotations are valid for 30 days and unless specifically stated
otherwise are based on ex stock and subject to prior sales. After
the period of 30 days has expired the Company reserves the right
to vary or withdraw any quotation given by it prior to the Company’s
acceptance of the Customer’s order.
b)It is the responsibility of the Customer to ensure that the quantity, type
and description of the goods specified in any quotation corresponds
with the quantity, type and description of the goods required by the
Customer and in respect of which the Customer has requested the
Company to quote. The Company shall be under no liability whatsoever
to the Customer for any discrepancy not drawn to the Company’s
attention prior to the acceptance by the Company of any order placed
on the basis of the relevant quotation.
2. Price
a) Prices quoted do not include GST
b)Notwithstanding Clause 1(a), the Company shall be entitled to vary the
purchase price for the goods at any time prior to delivery if the cost
to the Company of performing the contract is increased by reason of
delivery of the goods outside normal working hours at the request of
the customer or to an address other than that originally specified by the
Customer.
c)Notwithstanding Clause 1(a), the Company shall be entitled to vary the
purchase price for imported goods at any time prior to delivery if the
currency used to quote has shifted by more than 2.5% between the
date quoted and the date of invoice.
3. Terms of Payment
a)Where the Customer has a credit account with the Company, the
invoice amount for the goods must be paid in full within thirty (30) days
of the date the goods were invoiced. In all other cases the purchase
price for the goods must be paid in full on or before delivery.
b)The Customer is not entitled to withhold payment or make any
deduction from the purchase of the goods in respect of any set off or
counterclaim.
c)If the Customer fails to pay for any installment or installments of
the goods, the Company may in its absolute discretion, but without
prejudice to any other remedy it may have, postpone the fulfillment of
its obligations under this transaction and under any other transaction
with this Customer until such payment is made and charge to the
Customer any extra expense incurred thereby.
e)Credits and returned goods must be pre approved prior to returning to
Alkon Sales.
4. Property in the Goods
a)Notwithstanding delivery of the goods to the Customer, property in the
goods will not pass to the Customer until the Customer has paid to the
Company all sums owing by the Customer to the Company under the
transaction.
b)Until such payment is made, the Customer holds the goods as bailee
for the Company and will store the goods separately from other goods
on the premises of the Customer or in some other way as to render
them capable of separate identification.
c)Where payment is not made on or before the due date, the Customer
will, upon demand by the Company, deliver up the goods to the
Company, failing which the Company is hereby irrevocably authorised
to enter upon the place where the goods are situated and remove the
same and the Customer will indemnify the Company against any action
claim or demand arising out of the exercise by the Company of its
powers under this sub-clause.
d)Where the contract is for delivery of goods by installments, the property
will not pass in any installment until payment has been made to the
Company for the whole ordered quantity.
5. Risk
Risk will pass to the Customer on delivery of the goods notwithstanding
that ownership remains with the Company until payment is made in full.
6. Delivery
a)Unless otherwise stated in writing, the Company shall be entitled to
make delivery by installments and to determine the route and manner of
delivery of the goods.
b)The Company shall be entitled to deliver the goods to the premises
notified by the Customer even though those premises may be
unattended by the Customer at the time of delivery
c)The Company’s delivery records shall be prima facie proof of delivery of
the goods to the Customer.
d)If the Company is prevented (directly or indirectly) from delivering the
goods or any of them by reason of any act of God or strikes, lockouts,
trade disputes, fire, breakdown, interruption of transport, governmental
action or any other cause whatsoever (whether or not of the like nature
to those specified herein) outside its control the Company will be
under no liability whatsoever to the Customer and will be entitled at its
option either to terminate the transaction or to extend the time of its
performance.
7. Cancellation or Suspension of Orders
Except where the Customer has a statutory right of termination, orders
accepted by the Company may not be cancelled either wholly or in part
without the consent in writing of the Company.
8. Default by Customer
Upon the happening of any of the following events:
a)The Customer makes default in any payment due under any transaction
or in payment of any monies due by the Customer to the Company,
b)a resolution is passed or proposed or a petition is presented or an
application filed for the winding-up of the Customer;
c)a receiver or receiver and manager is appointed of the property or any
part of the property of the customer;
d)the Customer makes or proposes to make any arrangements with its
creditors;
e) the Customer is placed under official management;
f) execution is levied upon any of the assets of the Customer;
g)the Customer becomes bankrupt, the Company may at its option
and notwithstanding its waiver of any previous default or failure and
without prejudice to any other remedies it may have withhold further
deliveries or require payment in cash before or on shipment or delivery
(notwithstanding any prior agreement as to the terms of payment) or
terminate all or any purchase orders.
9. Liability
a)Subject to any State or federal legislation which expressly prohibits the
exclusion of any condition or warranty which may be implied into any
transaction;
i)the Company will be under no liability to the Customer for any defects
in the goods resulting from or arising out of the production of the same
in accordance with any information, designs or drawings provided by the
Customer or submitted to the Customer by the Company and approved
by the Customer;
ii)all conditions, warranties and representations on the part of the
Company which are not contained in or incorporated by reference in
these terms and conditions or on the fact hereof, whether express or
implied, statutory or otherwise, and whether collateral or antecedent
hereto or otherwise, are hereby expressly excluded;
iii)The limit of the companies warranty on the goods will extend so far as
the cost of replacement of the same or an equivalent good and will only
take effect if the product manufacturer is proven to have been negligent
in its manufacture to the customers drawing or specifications. Any
additional costs, claims or liabilities will be borne by the Customer.
iv)the Company will be under no liability whatsoever to the Customer
for any loss, injury or damage (including consequential loss, injury or
damage) suffered or caused as a result of or arising out of any act or
omission (whether negligent or otherwise) by the Company, its servants
or agents or any other person in any way related to or arising out of the
performance of the Contract by the Company;
10. Miscellaneous
a)The Customer will, upon demand by the Company, pay to the Company
the amount of any stamp duty or other tax (including sales tax and
GST) payable on the supply of any goods by the Company.
b)A certificate signed by an office of the Company stating the amount due
and payable by the Customer under any contract will be prima facie
evidence thereof.
11. Intellectual Property
All copyright, design right and other intellectual property in any design,
specification, process, method of working or other information relating to
the Goods (other than that provided by the Buyer to the Company) shall
vest for all time in the Company. The Company only grants to the Buyer
an irrevocable licence to use the Goods.
Declaration of compliance and guarantee
Alkon Sales PTY LTD hereby guarantee that all our “AK” branded
products sold as “ALKOTE” Class 3 &”ALKOTE” Class 4 are coated
strictly in accordance with Australian Standard as 35666.2-2002, and
will meet the corrosion test requirements mentioned therein.
In addition, we guarantee that all “AK” self drilling screws will conform to
the structural and performance requirements of Australian Standard as
3566.1-2002
The following provisions apply:
1) The screws are used with compatible roofing and substrate material.
2) The screws shall be clearly marked with an “AK” head marking, and are
installed correctly.
3) The screws are used in environment as recommended by the
standards.
4) All claims must be in writing and is conditional on inspection and the
decision of the Alkon Sales inspector.
5) All screws that are deemed to be faulty will be replaced free of charge,
but Alkon Sales will not be responsible for any loss or damage caused.
47
MELBOURNE
12-14 Abruzzo Cres, Thomastown, VIC, 3074
P (03) 9464 3711 F (03) 9464 3733
E [email protected]
BRISBANE
2/25 Michlin St, Moorooka, QLD, 4105
P (07) 3848 6855 F (07) 3848 0411
E [email protected]
WWW.ALKON.COM.AU