and well-being as well as operator safety is
another contributing factor to the success
of this family owned business. Mark, EmilyJane and the team accommodating when it
comes to customised modifications to your
3060
crush. I have no hesitation
1980
395
150 in recommending
the Leichts CIA range of crushes and their
associated products
CIA sales and service is second to
none. Nothing is too much trouble.
Pro-Chute Base Dimensions
Peter McInnerney
“Blenheim” - Glen Morgan QLD
710
INSIDE WIDTH
150
ut
up
e:
950
810
1260
HEADBAIL
I run a live export depot in Northwest
Australia and have recently installed a
Richard Meacle
Leicht’s CIA hydraulic crush with the
Landmark Operations - Rockhampton QLD
five way remote draft. The equipment
All measurements are in mm.
is built strong and robust but still gives
the stockmen and vets great access
inside dimensions 2865
to all areas
of the crush. The system
We now have two of our properties
set up
outside dimensions vetless crush 2250
runs very
inside equipment,
dimensions vetless crush
2065smooth and is user friendly.
with Leicht’s CIA cattle handling
It allows us to process cattle extremely
including forcing yards and crush assemblies.
quick with minimal stress on the cattle
Since we have installed these, the cattle are
or the stockmen. I’ve used several CIA
far more quieter and easier to handle and it
Leicht’s
Country
Australia’s
is covered
by aand
fullhydraulic
12
crushes
both manual
is
much safer
for theIndustries
operator. Our
vet has equipment
month
warranty
or faulty
fullorrange
and I materials.
can not fault A
them
the Leicht’s
also
commented
on against
the safetyworkmanship
and ease of
of
spare
parts
are
kept
at
our
factory
and
can
be
ordered
through
CIA service or backup. I your
would not
operation of the systems we have in place
local
distributor.
recommend anything else.
now compared to our old setups.
Warranty
nal
ts
by
re
nt
It
re
en
Due to our constant striving to achieve the ideal, products and
Paul Heil - Manager
Jim Wedge
specifications
are subject to change without notice.
Ascot Charolais -East Greenmount QLD
Roebuck Export Depot - Broome WA
Agents For:
ur
t’s
Morrissey & Co
Calf Cradles and accessories
Gallagher Australia weighing
and data collection systems
Lot 10/11 Industrial Avenue
PO Box 91
Goombungee QLD 4354
Ph: (07) 4696 5200
Fax: (07) 4696 5440
Email: [email protected]
Website: www.leichtscia.com.au
24
Tru-Test weighing and data
collection systems
The Intelligent
Livestock Equipment!
www.leichtscia.com.au
Hay & Cotton Seed Feeders
Leichts CIA products have been designed to be user friendly, efficient and practical
without compromising safety. Our range has been designed and engineered
Australian owned and operated
from the ground up with input from experienced cattlemen and women. We
business since 1984.
manufacture what they require: dependable, reliable and efficient equipment
All materials and products used are
that can handle a diverse range of breeds.
Australian made to Australian Standards.
RBF36
23
Round Bale Feeder
• All galvanized
• Three ring type constructed
from 25NB galvanized pipe
• 75mm x 50mm galvanized mesh
around bottom
• 2.2m diameter
Our products have been tried and tested by a number of the largest
international and national landholders, sale yards and feedlots. These
cattlemen and women all stand by our products quality and reliability. With
the help of these men and women we have set a standard by which others
follow.
The designs have come direct from the man on the land. Experienced cattlemen who require equipment that is
versatile and strong enough to be capable of keeping up with constant changes and demands being introduced
into the beef, dairy and stud cattle industries. It is because of these specifications that Agricultural Universities
and other organisations are using and requesting Leichts CIA equipment for the next generation of “Intelligent
Cattlemen and Women”
RBF37
With the advice, experience and ingenuity of these men and women combined with our tradesman’s skills,
comes the safety, convenience, versatility and strength of the Leicht’s CIA range of equipment.
HF27
Rectangle Bale Hay Rack
4ft, 8ft or 12ft galvanized
Double Round Bale or
Large Rectangle Bale Feeder
All Galvanized
3m long x 1.8m high x 1.5 wide
Local Carrier, with a roadtrain load of panels
and Pro-Chutes to Rockhampton, QLD
Leicht’s CIA factory,
Goombungee, Queensland
Cotton Seed Feeder
The Cotton Seed Feeder is
designed to be filled at the storage
shed and towed to the paddock.
The cotton seed feeder can also
be coupled together to create the
‘roadtrain’ effect.
Specifications
Local Carrier, with a load of
Pro-Chutes bound for Beef Australia,
Rockhampton, QLD
2
Local Carrier, with a load of
700 panels to Alice Springs, NT
• 2.5 tonne capacity
• 4.8m bin length
• Fold up draw bar
• 16” tyres and rims on 8 leaf
spring tandem axel
CFS
Hay & Cotton Seed Feeders
Leicht’s CIA is known throughout Australia as the
“Intelligent Livestock Equipment”
Current Product Range
Interrogator Pro-Chute
Outback Pro-Chute
Country Pro-Chute
Beef King Pro-Chute
Basic & The Ringer Pro-Chute
Swing Arms
Optional Modifications
Relocatable Yard Equipment
Curved Race & Crowd Pen
Hay & Cotton Seed Feeders
4
6
8
10
12
14
16
18-19
21
23
Interrogator Optional Extras
Immobilizer Pro-Chute
Stockman Pro-Chute
Black Bute Pro-Chute
Mk5 Headbails
Pro-Chute Accessories
Weigh Boxes & Cattle Trap Gates
Stock Loading Ramps
Grain Feeders
5
7
9
11
13
15
17
20
22
Testimonials
We run a small Droughtmaster stud on our family
property in South East Queensland. The cattle crush had
been installed some thirty years ago and quite frankly,
was dangerous to operate. We decided to replace the
crush with something that was practical, easy to use and
most importantly, safe. A fellow Droughtmaster breeder
suggested that we look at the Immobilizer manufactured
by ‘Leichts Country Industries Australia’. They had
installed the Immobilizer on their property and were very
impressed with the efficiency and safety.
Mark and the team from Leicht’s CIA were a joy to
deal with from the outset. They inspected the property,
took photos of the yards, race and existing crush, and
then manufactured a crush to meet our needs and slot
seamlessly into the location. Mark also recommended
a number of modifications such as reducing the width
of the race, installing a Leicht’s CIA loading ramp, and a
number of Leicht’s CIA sliding gates along our very long
race, all of which were designed to make our operation
more efficient.
The installation process went off without a hitch. The
boys from Leicht’s CIA worked tirelessly for two days
and nights and the finished product is nothing short of
fantastic. We are so thrilled. What would normally take
us most of the day to complete is now achieved in a
couple of hours with no fuss and no stress on the cattle.
Not only is the Leicht’s CIA Immobilizer cattle crush
and gate system efficient and easy to operate, it is safe.
Our parents, both of whom are well into their 70’s take
charge of the crush and gates whenever we are doing
work with the cattle. They love it! But more importantly,
they can operate the system with ease and without risk
of injury. We would have absolutely no hesitation in
recommending Leicht’s CIA products.
Bronwyn Betts & Michael Hawkins
Nindethana Droughtmaster Stud, Camp Mountain QLD
We installed a Leicht’s CIA 5 way auto draft, hydraulic
crush, curved race and forcing yard in 2008. It was easy
to install and set up. It allows quick flow of cattle and low
stress on stock. We can weigh and draft 400 steers in
just over two hours with two men. Leicht’s CIA sales and
service is second to none. Nothing is too much trouble.
Peter McInnerney
“Blenheim” - Glen Morgan QLD
We now have two of our properties set up with Leicht’s
CIA cattle handling equipment, including forcing yards
and crush assemblies. Since we have installed these, the
cattle are far more quieter and easier to handle and it is
much safer for the operator. Our vet has also commented
on the safety and ease of operation of the systems we
have in place now compared to our old setups.
Jim Wedge
Ascot Charolais -East Greenmount QLD
I run a live export depot in Northwest Australia and have
recently installed a Leicht’s CIA hydraulic crush with the
five way remote draft. The equipment is built strong and
robust but still gives the stockmen and vets great access
to all areas of the crush. The system runs very smooth
and is user friendly. It allows us to process cattle extremely
quick with minimal stress on the cattle or the stockmen.
I’ve used several CIA crushes both manual and hydraulic
and I can not fault them or the Leicht’s CIA service or
backup. I would not recommend anything else.
Paul Heil - Manager
Roebuck Export Depot - Broome WA
3
Interrogator Pro-Chute
Full Hydraulic
Standard Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Hydraulic Headbail
Hydraulic V Squeeze
Hydraulic split rear door
Horizontal split gates both sides
Three individual drop down upper side
gates allowing for concentrated access on both sides
Four hinged lower side gates for feet and
leg access
Adjustable bottom for v squeeze
Neck access area for needling
Head extending rails
Removable 5mm checker plate floor
Rotating boom for controls
Bushed pivot points on headbail
Weigh bar mounting plates
Anti back up bar lugs
Grease Nipples on pivot points Electric Motor
Toggle Switches
4
Interrogator Pro-Chute
INTAP:
Interrogator Optional Extras
Remote Control
Hydraulic Vet Gate
Petrol Motor
Hydraulic 3 Way Draft
Hydraulic Race Gate
The Hydraulic 3 Way Draft is
used to draft animals from the
Pro-Chute into individual pens.
They can be drafted straight
through the unit, to the left or
to the right.
This unit is set up as standard
to be used manually. Should
it be required though it can
also be programmed to draft
automatically as an optional
extra.
Interrogator Optional Extras
Hydraulic Super Scoop
5
Outback Pro-Chute
CC00
Weight: 845kg
V-Style Squeeze
Standard Features
Adjustable Standing Width
•
Full walk-through Diamond Door Mk5 Headbail
•
•
•
•
•
•
•
•
•
•
•
•
Three individual drop down upper side gates for
concentrated access on both sides
Full exit gates split horizontally on both sides
Front operation of the rear slide gate assisting
single operation
Extra support bars on lower split doors
Removable 2 piece checker plate floor
Adjustable bottom for V-Style squeeze
Fully sheeted rear slide door
Grease nipples on pivot points
Weigh bar mounting plates
Front & rear open/close headbail operation
Anti back up bar lugs
Veterinary facilities
(Refer to page 13 for alternate headbail options)
Safety Features
•
•
•
6
CCOO:
Galvanized RHS:
Hot Dipped Galvanized:
Accessories:
Super Scoop:
Neckbar:
Baulk Gate:
Head Extenders: Standard
Floor: Standard
Fully sheeted headbail to eliminate leg injury
Fully sheeted bottom side gates to eliminate leg injury
Yellow working handles for operators visibility
Outback Pro-Chute
CCOO:
Immobilizer Pro-Chute
CC01:
7
Weight: 720kg
Standard Features
•
Full walk through Diamond Door Mk5 Headbail
•
•
•
•
•
•
•
•
•
•
Three individual drop down upper side gates for
concentrated access on both sides
Full exit gates split horizontally on both sides
Front operation of the rear slide gate assisting
single operation
Extra support bars on lower doors
Fully sheeted rear slide door
Grease nipples on pivot points
Weigh bar mounting plates
Front and rear open/close headbail operation
Anti back up bar lugs
Veterinary Facilities
(Refer to page 13 for alternate headbail options)
Safety Features
•
•
•
CC01:
Galvanized RHS:
Hot Dipped Galvanized:
Accessories:
Super Scoop:
Neckbar:
Baulk Gate:
Head Extenders:
Floor:
Fully sheeted headbail to eliminate leg injury
Fully sheeted bottom side gates to eliminate leg injury
Yellow working handles for operators visibility
Immobilizer Pro-Chute
Double Sided Parallel Squeeze
Country Pro-Chute
CC03SQ
Weight: 665kg
Single Sided Parallel Squeeze
Fitted with optional Head Extending Rails
Standard Features
•
Full walk through Diamond Door Mk5 headbail
•
•
•
•
•
•
•
•
•
•
Draft gates both sides
Horizontal split gates, operating side
Two hinged gates fitted into top split gate on
both sides allowing for concentrated access
Extra support bars on lower doors
Fully sheeted rear slide door
Grease nipples on pivot points
Weigh bar mounting plates
Front and rear open/close headbail operation
Anti back up bar lugs
Veterinary facilities
(Refer to page 13 for alternate headbail options)
Safety Features
•
•
•
8
Fully sheeted headbail to eliminate leg
injury
Fully sheeted bottom side gates to eliminate
leg injury
Yellow working handles for operators
visibility
Country Pro-Chute
CC03SQ:
Galvanized RHS:
Hot Dipped Galvanized:
Accessories:
Super Scoop:
Neckbar:
Baulk Gate:
Head Extenders:
Floor:
CC03SQ:
Stockman Pro-Chute
CC02:
9
Weight: 645kg
Single Sided Parallel Squeeze
Standard Features
•
Full walk through Diamond Door Mk5 Headbail
•
•
•
•
•
•
•
•
•
Draft gates both sides
Horizontal split gates, operating side
Two drop down gates fitted into top split
gate on working side allowing
concentrated access
3/4 sheeted rear slide door
Grease nipples on pivot points
Weigh bar mounting plates
Front and rear open/close headbail
operation
Anti back up bar lugs
Veterinary facilities
(Refer to page 13 for alternate headbail options)
Safety Features
•
•
•
Fully sheeted headbail to eliminate leg
injury
Fully sheeted bottom side gate to
eliminate leg injury
Yellow working handles for operators
visibility
CC02:
Galvanized RHS:
Hot Dipped Galvanized:
Accessories:
Super Scoop:
Neckbar:
Baulk Gate:
Head Extenders:
Floor:
Stockman Pro-Chute
CC02
Weight: 600kg
Beef King Pro-Chute
CC03
Rear Ratchet Squeeze Operating Side
Fitted with optional Head Extending Rails
Standard Features
•
Full walk-through Diamond Door Mk5 Headbail
CC03:
•
•
•
•
•
•
•
•
•
Draft gates both sides
Horizontal split gates on operating side
Two hinged gates fitted into top split gate on
both sides allowing concentrated access
Extra support bars on lower doors
Fully sheeted rear slide door
Weigh bar mounting plates
Front and rear open/close headbail operation
Anti back up bar lugs
Veterinary facilities
Galvanized RHS:
Hot Dipped Galvanized:
Accessories:
Super scoop:
Neckbar:
Baulk Gate:
Safety Features
•
•
•
10
(Refer to page 13 for alternate headbail options)
Fully sheeted headbail to eliminate leg injury
Fully sheeted bottom side gate to
eliminate leg injury
Yellow working handles for operatorsvisibility
Beef King Pro-Chute
Head Extenders:
Floor:
CC03:
Black Bute Pro-Chute
CC04:
Rear Ratchet Squeeze
Operating Side
Standard Features
•
Full walk through Diamond Door Mk5 Headbail
•
•
•
•
•
•
•
•
Full Draft gates both sides
Horizontal split gates on operating side
3/4 sheeted rear slide door
Weigh bar mounting plates
Front and rear open/close headbail operation
Manual ratchet arm on opposite side to
reduce animal movement
Anti back up bar lugs
Veterinary facilities
(Refer to page 13 for alternate headbail options)
CC04:
Galvanized RHS:
Hot Dipped Galvanized:
Accessories:
Super scoop:
Neckbar:
Safety Features
Baulk Gate:
•
•
•
Head Extenders:
Fully sheeted headbail to eliminate leg injury
Fully sheeted bottom side gate to
eliminate leg injury
Yellow working handles for operatorsvisibility
Floor:
Black Bute Pro-Chute
Weight: 540kg
CC04
11
Basic & The Ringer Pro-Chute
The Ringer
Pro-Chute
The Ringer Pro-Chute is the ideal unit
for the hobby farmer.
It features the standard diamond door
Mk5 Headbail and Full Veterinary
Facilities as well as a 3 way draft,
horizontal split gate on the working side,
weigh bar mounting plates and a 7 bar
rear slide gate.
With these features this unit has
the ability to work the smaller herds
effectively.
CC08:
Galvanized RHS:
Safety features
• Fully sheeted headbail to eliminate leg injury
• Fully sheeted bottom side gates to eliminate leg injury
• Yellow working handles for operators visibility
Basic Pro-Chute
The Vetless Basic Pro-Chute is the ideal
unit for the hobby farmer.
It features the standard Diamond Door
Mk5 headbail as well as a 3 way draft,
horizontal split gate on the working side,
weigh bar mounting plates and a 7 bar
rear slide gate. With these features this
unit has the ability to work the smaller
herds effectively.
This unit is manufactured as standard
from Galvanized RHS material.
CC07:
Super scoop: 12
Hot Dipped Galvanized:
Neckbar:
Baulk Gate:
Mk5 Headbails
13
Mk5 Headbail
The Mk5 Headbail is made for the working
man. Our designers have produced a headbail
that meets the needs of the feedlot, Beef/Dairy
cattle industries. Ease of operation and safety
to both livestock and operators is a major
concern at Leicht’s CIA.
The Auto-Release Headbail mechanism is
one of the most innovative on the market. By
eliminating the squeeze release triggers, the
headbail is engaged and disengaged in a much
faster and smoother operation. This relieves
stress on both the animal and the handler.
The Mk5 headbail is fully walk-through.
We offer different yolks in the headbail design
to suit your handling needs as pictured below.
Optional Yolk Door
HB10:
Standard Diamond Door
Optional Straight Door
Super scoop: Neckbar:
Baulk Gate:
Galvanized RHS:
Hot Dipped Galvanized:
Head Extender:
Mk5 Headbails
The unique diamond shape and fully sheeted
leg area are safety features designed to
eliminate leg injuries whilst in the headbail.
SNB07SS
Weight: 25kg
Swingarm Super Scoop
The Swingarm Super Scoop has been
designed to restrict side to side movement
of the animals head.
The rubber lined scoop holds the animals
head in position which makes it ideal for
mouthing, drenching, ear-tagging, eye
treatment etc.
The swingarm super scoop provides a
safer working environment for both the
animal and operator.
Swing Arms
Patent Number: 585 348
SNB07SS:
SAFETY FEATURE: The Swingarm Super Scoop and the Swingarm Neckbar both have a quick
release case hardened ratchet system to avoid chocking problems should the beast fall in the chute.
Swingarm Neckbar
The Swingarm Neckbar is designed to
restrict an animals head movement.
The Neckbar is designed to lift the head
of the animal from as low as ground
level and hold at the desired height.
Therefore reducing the stress on both
the operator and animal.
Patent Number: 585 348
SNB07:
14
Swing Arms
SNB07
Weight: 20kg
Pro-Chute Accessories
15
Pro-Chute Floor
The Pro-Chute floor is Hot Dipped Galvanized and
is constructed from 3mm Checker Plate Steel,
with anti-slip grips welded to the checker plate.
Pro-Chute Floor
Baulk Gate
The heavy duty Baulk Gate is designed to
assist the operator in catching animals
that are not willing to co-operate and
greatly reduces the loss of animals out the
front of the pro-chute.
The Baulk Gate may also be fitted to all
Pro-Chutes or Headbails.
Baulk Gate
Head Extending Rails
The Head Extending Rails allow the
animals head to be held 60mm out
from the face of the bail which makes
operations like ear-tagging and
dehorning more accessible
Head Extending Rails
Panel Connection Hoops
The Panel Connection Hoops bolt onto the front of
the headbail allowing you to attach panels or gates in
frame while still utilizing the Super Scoop or Neckbar
Panel Connection Hoops
Pro-Chute Accessories
The Pro-Chute floor is a standard two piece
unit which is able to be installed and removed
when required.
Galvanized RHS or Hot Dipped Galvanized
Optional Modifications
All of our Pro-Chute
range has the option
of being constructed
from Galvanized
RHS or fully Hot
Dipped Galvanized.
Galvanised RHS Stockman
Hot Dipped Galvanised
Immobilzer
Timber Scanning Panel
The Timber Scanning Panel is able to
be fitted to any of our Pro-Chute range
during the manufacturing process
ready to mount your ID scanner.
Wheel Kit
The Mobile Wheel Kit is designed so the Pro-Chute
is able to be moved from one location to another.
Once fitted to the Pro-Chute it is able to be raised
and lowed with the supplied jack at any chosen site.
MCKO9
The mobile Wheel Kit, removable drawbar, wheels,
axel and jack can be fitted at our factory or supplied
in kit form.
*Not for road transport.
CC01 fitted with MCK09
Lower Body Access Door
The Lower Body Access Door is used
for semen collection, calf feeding and
inspection of hooves and legs.
Available to be fitted in any of our
Pro-Chute range.
Other custom door options are also
available.
16
Optional Modifications
Weigh Boxes & Cattle Trap Gate
This Scanning Weigh Box has been designed
specifically for electronic identification systems.
The timber and ply panel on the working side is fixed
and is necessary feature to eliminate interference with
the electronic identification antenna.
The non working side is a 3/4 steel sheeted drafting
gate. Complete with fully sheeted steel slide doors
both front and back.
Standard Features:
• Fully Sheeted sliding door
front and rear
• 3/4 drafting gates both sides
• Checker plate floor with
antislip bars
• Weigh Bar Mounting Plates
Compatible with all identification systems.
CWB
WBOX
Weight: 490kg
Scanning Weigh Box
Standard Weigh Box
Cattle Trap Gate
WCT
WCT
Portable Cattle Trap Gates are the
cheapest form of mustering feral
livestock available today.
Installed into an existing fence
line of by using Leicht’s CIA
Relocatable Yard Panels you will
soon trap those hard to get cattle.
Spears can be changed from side
to side for settings:
Training - 300mm
Catching - 100mm
Weigh Boxes & Cattle Trap Gate
Weigh Boxes
17
Standard Yard Equipment
Relocatable Yard Equipment
40x40 x2.0mm 100% Australian made Steel
18
YP12A
MAPS
GIF20S
2.2m Standard 6 Rail Yard Panel
2.170m Panel with Man Access Gate
2.170m Gate in Frame
measurements are from pin to pin.
Also available 40x40x1.6m RHS 6 Bar Yard Panel
Standard Yard Panel (YP12A)
2.2m long x 1.8m high x 6 rail
Oval Rail Yard Equipment
75x40 x2.0 100% Australian made Steel
KYP6
KMAG
KG
KG3
KG4.2
2.160m 6 Rail Yard Panel
2.170m Panel with Man Access Gate
2.160m Gate in Frame
3m Gate in Frame
4.2m Double Gate in Frame
measurements are from pin to pin.
Oval Rail Yard Panel (KYP6)
2.1m long x 1.8m high x 6 rail
Cattle King Yard Equipment
115x42 x 2.0mm 100% Australian made Steel
KK5
KKMAG
KKG
KKG3
KKG4.2
2.180m 5 Rail Yard Panel
2.170m Panel with Man Access Gate
2.170m Gate in Frame
3m Gate in Frame
4.2m Double Gate in Frame
measurements are from pin to pin.
Cattle King Yard Panel (KK5)
2.2m long x 1.8m high x 5 rail
Manual
3-Way Draft
The Manual 3-Way Draft
is manufactured as
standard with 1 drafting
gate each side and a
man access area before
the draft.
Relocatable Yard Equipment
Relocatable Yard Equipment
Oval Rail Gate in Frame (KG)
All Gate in frames are able to be fitted with a slam latch,
at an additional cost.
Cattle Rail Gate in Frame (KKG)
Oval Rail Panel with Man Access Gate
(KMAG)
Calf Relocatable Equipment
Sliding Gate in
Frame (SGO)
Race Hoop (KRH)
KYPGC2.1m 6 Rail Calf Yard Panel
KSGC
Calf Sliding Gate in Frame
KRHC
Calf Race Hoop
Relocatable Yard Equipment
Standard Gate in Frame (GIF20S)
19
KRA3
Stock Loading Ramps
KR3
3 Metre Standard Oval Rail Loading Ramp
Timber Floor
Timber Floor
KR4.8
KR4.8
KRE
KSW3
4.8 Metre Standard Oval Rail Loading Ramp
Timber Floor
Adjustable also available
4.8 Metre Standard Oval Rail
Loading Ramp With 1.5 Metre Ramp Extension,
Catwalk and Handrail.
CBR
MLR25
3 Metre Mobile Loading Ramp
Steel Floor
Can Carry up to 34 portable panels
20
3 Metre Adjustable Oval Rail Loading Ramp
Stock Loading Ramps
Custom Loading Ramp
Steel Floor
Curved Race & Crowd Pen
Once in the Crowd Pen, cattle will continuously flow through the curved race and into the
Pro-Chute. Cattle will work easier reducing the stress on both animal and operator.
The Crowd Pen consists of curved rubber lined panels which are designed to create the half circle.
A single gate pivots from an anchored centre post. This gate is operated from the walkway located
along the entire length of the crowd pen. When operating the swing gate the safety latch locks at
300mm intervals.
This safe and efficient swing gate and walkway allows the operator to see ahead to the race and
makes it simpler for a one man operation.
Crowd Pen
Curved Race
Standard Design
Custom Designs
3m Radius Crowd Pen with Walkway:
3m Radius Straight Wall Race with Walkway:
It is recommended that the Curved Race and Crowd Pen
be mounted on a concrete slab.
Curved Race & Crowd Pen
The Curved Race and Crowd Pen is designed to be efficient and economical way to work cattle.
21
CSF33
SSF2
Single Sided Cattle Grain Feeder
24ft 10tonne capacity (SSF2)
Grain Feeders
CSF34
Double Sided Cattle Grain Feeder
12ft 4tonne capacity (CSF34)
CSF35
Double Sided Cattle Grain Feeder
16ft 5tonne capacity (CSF35)
CSF37
CG
CSF37
Double Sided Calf Grain Feeder
8ft 1tonne capacity (CSF37)
All Grain Feeders Feature
• Strong design
• Excellent weather protection
• Galvanized pipe skids
• Access Ladder
• Full length lid, can be opened from the ground
• Adjustable flow doors
22
Double Sided Cattle Grain Feeder
8ft 2.5tonne capacity (CSF33)
Grain Feeders
Double Sided Calf Grain Feeder
With Creep Gates (CSF37 with CG)
Available in
• Black sheet with zincanneal trough
fully painted
• Full zincanneal painted
Hay & Cotton Seed Feeders
Leichts CIA products have been designed to be user friendly, efficient and practical
without compromising safety. Our range has been designed and engineered
Australian owned and operated
from the ground up with input from experienced cattlemen and women. We
business since 1984.
manufacture what they require: dependable, reliable and efficient equipment
All materials and products used are
that can handle a diverse range of breeds.
Australian made to Australian Standards.
RBF36
23
Round Bale Feeder
• All galvanized
• Three ring type constructed
from 25NB galvanized pipe
• 75mm x 50mm galvanized mesh
around bottom
• 2.2m diameter
Our products have been tried and tested by a number of the largest
international and national landholders, sale yards and feedlots. These
cattlemen and women all stand by our products quality and reliability. With
the help of these men and women we have set a standard by which others
follow.
The designs have come direct from the man on the land. Experienced cattlemen who require equipment that is
versatile and strong enough to be capable of keeping up with constant changes and demands being introduced
into the beef, dairy and stud cattle industries. It is because of these specifications that Agricultural Universities
and other organisations are using and requesting Leichts CIA equipment for the next generation of “Intelligent
Cattlemen and Women”
RBF37
With the advice, experience and ingenuity of these men and women combined with our tradesman’s skills,
comes the safety, convenience, versatility and strength of the Leicht’s CIA range of equipment.
HF27
Rectangle Bale Hay Rack
4ft, 8ft or 12ft galvanized
Double Round Bale or
Large Rectangle Bale Feeder
All Galvanized
3m long x 1.8m high x 1.5 wide
Local Carrier, with a roadtrain load of panels
and Pro-Chutes to Rockhampton, QLD
Leicht’s CIA factory,
Goombungee, Queensland
Cotton Seed Feeder
The Cotton Seed Feeder is
designed to be filled at the storage
shed and towed to the paddock.
The cotton seed feeder can also
be coupled together to create the
‘roadtrain’ effect.
Specifications
Local Carrier, with a load of
Pro-Chutes bound for Beef Australia,
Rockhampton, QLD
2
Local Carrier, with a load of
700 panels to Alice Springs, NT
• 2.5 tonne capacity
• 4.8m bin length
• Fold up draw bar
• 16” tyres and rims on 8 leaf
spring tandem axel
CFS
Hay & Cotton Seed Feeders
Leicht’s CIA is known throughout Australia as the
“Intelligent Livestock Equipment”
and well-being as well as operator safety is
another contributing factor to the success
of this family owned business. Mark, EmilyJane and the team accommodating when it
comes to customised modifications to your
3060
crush. I have no hesitation
1980
395
150 in recommending
the Leichts CIA range of crushes and their
associated products
CIA sales and service is second to
none. Nothing is too much trouble.
Pro-Chute Base Dimensions
Peter McInnerney
“Blenheim” - Glen Morgan QLD
710
INSIDE WIDTH
150
ut
up
e:
950
810
1260
HEADBAIL
I run a live export depot in Northwest
Australia and have recently installed a
Richard Meacle
Leicht’s CIA hydraulic crush with the
Landmark Operations - Rockhampton QLD
five way remote draft. The equipment
All measurements are in mm.
is built strong and robust but still gives
the stockmen and vets great access
inside dimensions 2865
to all areas
of the crush. The system
We now have two of our properties
set up
outside dimensions vetless crush 2250
runs very
inside equipment,
dimensions vetless crush
2065smooth and is user friendly.
with Leicht’s CIA cattle handling
It allows us to process cattle extremely
including forcing yards and crush assemblies.
quick with minimal stress on the cattle
Since we have installed these, the cattle are
or the stockmen. I’ve used several CIA
far more quieter and easier to handle and it
Leicht’s
Country
Australia’s
is covered
by aand
fullhydraulic
12
crushes
both manual
is
much safer
for theIndustries
operator. Our
vet has equipment
month
warranty
or faulty
fullorrange
and I materials.
can not fault A
them
the Leicht’s
also
commented
on against
the safetyworkmanship
and ease of
of
spare
parts
are
kept
at
our
factory
and
can
be
ordered
through
CIA service or backup. I your
would not
operation of the systems we have in place
local
distributor.
recommend anything else.
now compared to our old setups.
Warranty
nal
ts
by
re
nt
It
re
en
Due to our constant striving to achieve the ideal, products and
Paul Heil - Manager
Jim Wedge
specifications
are subject to change without notice.
Ascot Charolais -East Greenmount QLD
Roebuck Export Depot - Broome WA
Agents For:
ur
t’s
Morrissey & Co
Calf Cradles and accessories
Gallagher Australia weighing
and data collection systems
Lot 10/11 Industrial Avenue
PO Box 91
Goombungee QLD 4354
Ph: (07) 4696 5200
Fax: (07) 4696 5440
Email: [email protected]
Website: www.leichtscia.com.au
24
Tru-Test weighing and data
collection systems
The Intelligent
Livestock Equipment!
www.leichtscia.com.au