1. No category

SERIES 100
TILE ROOF HOOK SOLUTIONS
SnapNrack Solar Mounting Solutions
The SnapNrack line of solar mounting
solutions is designed to reduce total
installation costs. The system’s technical
innovations have been proven to drive
down costs and improve installation
quality on more than 350 MW of solar
installations.
Tile Roof Hook Solutions Simplified
SnapNrack Universal Tile Roof Hooks are designed
specifically for Flat, S and Wave shaped tile roofs, while the
Flat Tile Roof Hooks are a lower cost solution for Flat Tile.
The hooks are a strong, low-profile roof attachment solution
Tile Roof Hooks in Simple Steps:
UNIVERSAL TILE HOOK
1) Locate rafter and drill pilot holes
for tile roofing that eliminates the need for cone flashings
2) Install tile hook base and position tile
hook arm
and cutting and drilling of tile. The hook arm is fabricated
3) “Drop-in” and tighten
from 304 Stainless Steel for maximum stiffness and lowest
possible thickness, typically allowing installation without
4) Apply optional deck level flashing and
replace tiles
cutting or grinding of tiles.
FLAT TILE HOOK
•
Slotted attachment provides 1.25” of vertical
adjustment for array leveling.
•
Strong and rigid design reduces the quantity of tile
hooks and roof attachments required.
•
•
1) Locate rafter and drill pilot holes
2) Install Flat Tile Hook
3) Apply optional deck level flashing and
replace tiles
Universal hook features quick “drop-in” design, simply
Place order with your distributor. Purchase
rock arm into base and secure with a single bolt
material for a single project or order in bulk
Tile hook profiles are specifically designed for use with
for additional savings.
SnapNrack Standard Rail.
Patent Pending
PV Mounting System
2703
Flat Tile Hook Assembly
Universal Tile Hook Assembly
SNAPNRACK BONDING
CHANNEL NUT
SNAPNRACK BONDING
CHANNEL NUT
5/16-18 X 1-1/4 IN
STAINLESS STEEL
FLANGE BOLT
5/16-18 X 1-1/4 IN
STAINLESS STEEL
FLANGE BOLTS
SNAPNRACK
STAINLESS STEEL
UNIVERSAL TILE
HOOK ARM
SNAPNRACK BONDING
CHANNEL NUT
SNAPNRACK STAINLESS
FLAT TILE ROOF HOOK
SNAPNRACK ALUMINUM
UNIVERSAL TILE HOOK
BASE, MILL FINISH
Flat Tile Hook Dimensions
Universal Tile Hook Dimensions
THRU HOLES FOR
5/16 IN LAG BOLTS
2.5
FITS 5/16 IN
LAG BOLTS
1.25
8.0
2.5
.5
2.3
1.5
6.2
7.2
1.6
1.6
5.0
4.9
8.8
SnapNrack Tile Roof Hook Technical Data
Universal Tile Hook
Patent Pending
Flat Tile Hook
Works With
•
S Tile, Wave Tile and Flat Tile
•
Flat Tile
Materials
•
Aluminum Base with
•
Stainless Steel Tile Hook Arm
•
1.2 lbs
Stainless Steel Tile Hook Arm
Weight
•
2.1 lbs
Warranty
•
10 Year material and worksmanship
(877) 732-2860
www.SnapNrack.com
Printed on recycled paper using soy based inks.
© 2015 by SnapNrack PV Mounting System. All rights reserved.
8.8