2014
Z E R O - T U R N S
|
F R O N T - M O W E R S
|
W A L K - B E H I N D S
The Ferris® brand was born with a built-to-last commitment
which continues today along with a history of impressive
innovations. From the industry’s first ever hydrostatic drive
walk-behind lawn mower to the industry’s first and only patented
suspension system for the riding lawn mower, Ferris continues
to innovate.
This dedication is what separates us from other manufacturers
and it will separate you from your competition too. We pride
ourselves on building reliable commercial mowers that time
and time again will be more productive and ensure the highest
quality of cut. Beyond manufacturing mowers that will provide
years of service, we continually look for ways to improve not
only our products, but our customer’s satisfaction.
We know that choosing the right piece of equipment is essential
and that’s why we go beyond making the most of every minute
in the field. Our knowledgeable distributors are prepared to
assist you with exceptional service. We are confident that
they will help you select the Ferris mower that fits you best.
From our products to our people — you
can rely on Ferris Commercial Mowers.
www.FerrisIndustries.eu | 3
1909
Ferris Industries began as the Uebler Milking Machine Company.
1986
With the emerging landscaping industry, the company shifted its focus to
manufacturing commercial lawnmowers. The Ferris brand was born with the same
commitment to strong, built-to-last machinery that characterized the company’s
established heritage.
1987
Ferris introduced and patented the first hydrostatic drive walk-behind mower.
The company was awarded the prestigious Innovation Award from the
Outdoor Power Equipment Institute (OPEI) for this breakthrough.
1998
Ferris revolutionized the industry with the introduction of Independent Suspension
(I.S.) – the first ever Independent Suspension System for the riding mower.
I.S. Independent Suspension earned Ferris the distinguished OEMmie award for
innovative engineering solutions.
1999
Ferris became a subsidiary of Simplicity Manufacturing, Inc. Throughout the next year,
Simplicity demonstrated its commitment to the company by increasing its workforce,
completing a factory expansion, and pouring resources into product development.
2000
Ferris introduced a new family of zero-turn mowers from 48- to 72-inches.
The largest model featured 4-wheel I.S. Independent Suspension, thereby
confirming Ferris’ position in the industry as Commercial Mower Specialist™.
2002
Ferris achieved a new level of speed and performance with the introduction of the
IS® 5000Z. This was the first diesel-powered mower in the Ferris line featuring a
Caterpillar industrial-grade diesel engine. The increase in demand for products led
the company to break ground once again for expansion.
2004
Simplicity manufacturing, along with its subsidiaries, Ferris, Snapper,
and Giant-Vac were purchased by Briggs & Stratton Power Products Group.
To handle the continued success additional square footage was added to
the Munnsville manufacturing facility.
2005
The IS®1500Z, IS® 4500Z and HydroCut™ 36 were released. The incredible sales
demand for these new models boosted production three times during the course
of the year.
2006
Ferris updated their entire line of zero-turn mowers with the addition of
standard Roll Over Protection Systems. Two new models were also introduced,
the IS® 5100Z and the all new IS® 2000Z. Ferris’ continued commitment to
reliability and innovation has defined the company as a leader in the
commercial market.
2008
Ferris introduced the Rear Discharge mower deck with mulching system fitted
as standard.
2009
Ferris introduced the IS® 2500Z diesel zero-turn. The industry witnessed the evolution
of mowing with the innovative Ferris Evolution™ mower - a forward thinking compact
zero-turn that places the operator in the most ideal ergonomic position for mowing.
Briggs & Stratton have proudly opened a Centre of Excellence in Roermond in the
Netherlands. This centre was built to service the training needs of their European,
Middle East and African distributor network and their dealers for Yard and Power Products.
2012
Ferris introduced the ComfortControlTM DD-FM SeriesTM. This walk-behind flail mower is
designed to combat the most demanding environments and is ideal for mowing rough
and overgrown areas.
INTRODUCTION
SUSPENSION TECHNOLOGY ................. 04
ICDTM CUTTING SYSTEM ....................... 06
RIDE-ON MOWERS .......................... 08
IS® 5100Z ............................................ 10
IS® 2500Z ............................................ 12
IS® 600Z .............................................. 14
IS® 700Z .............................................. 14
F800X .................................................. 16
EVOLUTIONTM ....................................... 18
WALK-BEHIND MOWERS ............... 20
COMFORT CONTROLTM DD FW35 .......... 22
COMFORT CONTROLTM DD FM30........... 23
COMFORT CONTROLTM DD .................... 24
HYDROCUTTM........................................ 25
ACCESSORIES .................................. 26
SPECIFICATIONS.............................. 28
SUSPENSION TECHNOLOGY
FERRIS IS® INDEPENDENT
SUSPENSION SYSTEM
UNIQUE PATENTED FEATURE
An exclusive feature which sets Ferris completely aside from the competition is their industry
patented IS® suspension system featured throughout the Ferris range. Ferris offers a whole
range of benefits to the end user just through the suspension system alone, from increased
operator comfort to boosting productivity. Ferris really seems to have it covered!
GREATER CAPABILITY AND PRODUCTIVITY
Many operators are not always aware that they slow down to compensate for rough terrain.
So, when protected from these effects using a Ferris IS® suspended ride-on mower, the operator
naturally increases speed taking advantage of the full engine horsepower available from the machine.
The IS® suspension system itself is designed to absorb the bumps and vibrations that can cause
operator fatigue. The increased comfort translates to greater operator satisfaction and increased
productivity.
TERRAIN FOLLOWING DESIGN FOR A PRECISE CUT
The mower deck follows the movement of the IS® independent wheel suspension and the flow
of uneven terrain. So for example when going over a bump, the suspension follows the ground
contours, minimizing breaks in ground contact and maximizing traction to produce a superior and
consistent cut. This suspension also benefits the chassis by significantly reducing shock load.
COMMERCIAL MOWER SPECIALIST
In an industry where productivity against investment is becoming even more important, the direct
link between operator comfort and ground coverage is definitely food for thought when purchasing
new equipment. Ferris IS® suspension results in reduced shocks to the chassis, superior operator
comfort, increased mowing speeds, better stability and an extended overall mower life.
That’s why Ferris is the commercial mower specialist for your business!
COMFORT
Ferris’ exclusive suspension system absorbs shocks and vibrations that cause operator fatigue.
The increased comfort translates to operator satisfaction and increased productivity.
IS® Suspension Technology is available on select models.
www.FerrisIndustries.eu | 5
SO HOW DOES IT WORK?
Our patented suspension system allows each
wheel to move up and down independently
smoothing out uneven turf. The deck of the
mower floats from the suspension and raises
and lowers as the wheels of the mower do.
This system virtually eliminates shocks to the
chassis, resulting in superior operator comfort,
increased mowing speeds, stability and
extended mower life.
iCD™ CUTTING SYSTEM
The innovative iCD™ Cutting System allows for better airflow,
discharge and superior cut quality. The slope nose of the deck
forces the grass forward and allows them a longer period of
time to rise in the chamber before the blades make contact.
The new iCD™ cutting system offers unparalleled cut quality
and complements the innovation of the Ferris line.
• Standard on selected models.
• The leading edge of the deck is reinforced
just where you need it to add strength,
not weight.
• Marbain steel blades are stronger, harder
and require less time sharpening.
• Flexible rubber discharge chute simply
flexes when it comes in contact with objects.
• Purpose built rear discharge mulching decks
with removable bolted rear baffle.
3
1
2
8
4
7
5
6
1. F lexible recycled rubber discharge chute reduces
contact damage
5. R einforced leading edge which provides protection
where the deck needs it most
2. E xtra wide discharge opening evenly disperses
grass clippings
6. C entre point is offset, optimizing airflow for discharge
3. D ebris shield on idler pulleys keeps moisture and debris
away extending bearing life
4. M ulti-layer heavy gauge steel construction for
maximum strength
7. S lope nose design reduces the amount of clippings
discharged from the front
8. D eck step allows for easy entry and exit from the
operator’s compartment
www.FerrisIndustries.eu | 7
Full-width double top deck constructed of
steel bent in opposing directions for added
strength.
1. P urpose built rear discharge mulching deck.
4
2. M arbain steel blades.
3. E asily removable mulching insert.
4. Dedicated Ferris Mulching blades.
1
2
3
RIDE-ON MOWERS
www.FerrisIndustries.eu | 9
ZERO-TURNS
Ferris’ exclusive patented suspension system sets
Ferris ® completely aside from the competition.
The fully independent suspension paired with
powerful engine choices achieves new levels of
comfort ability, performance and productivity.
The suspension system protects the operator
from uneven terrain, allowing increasing ground
speed and taking full advantage of all available
horsepower. With 9 models to choose from,
offering diesel and gasoline powered engines,
deck widths ranging from 112 cm to 183 cm
(44” to 72”), and the option to choose between
rear and side discharge you will be sure to find
the perfect Ferris ® zero-turn mower to fit your
needs. Be surprised by the extremely high
capacity and maximum operator comfort.
FRONT-MOWER
The visibility and versatility of the Ferris ® F800X
cannot be beaten. Its out-front design is perfect
for reaching under hedgerows and to trim around
trees, bushes and landscaped areas with ease.
Thanks to the zero-turn steering system the machine
is extremely manoeuvrable. The machine is standard
equipped with an electric deck lift which also
provides a nearly vertical fold position for easy
access to the underside of the deck for cleaning
and maintenance.
EVOLUTIONTM
The forward thinking design of the Ferris ®
EvolutionTM mower allows the operator to be placed
in the most ideal ergonomic position to mow, which
is much more comfortable than a stand-on mower.
The operators back, shoulders and neck are aligned
to minimize discomfort and fatigue. The operators
weight is evenly distributed providing comfort
throughout the day. Integrated suspension
technology heightens the riding experience and
delivers outstanding comfort and performance.
Especially suitable for the medium-sized gardens
that are not accessible with a large machine, but
which are too large for an ordinary walk-behind
mower.
High performance synthetic oil
used in select hydraulic systems.
IS® 5100Z
The IS® 5100Z series of full-sized zero-turn mowers features an impressive complement of comfort,
performance and convenience. It features easier service access, more horsepower, improved operator
comfort and increased performance, all contributing to lower cost of ownership. Our industry-exclusive
suspension is a standard feature. When it comes to commercial lawnmowers, this is truly the ultimate
riding and cutting machine.
MODEL
ENGINE
DECK
IS5100ZC33D61RDCE
33.5 HP* Caterpillar 3 Cylinder
Liquid Cooled Diesel
155 cm - 61” iCDTM Deck
Rear discharge with standard mulching insert
IS5100ZC33D72RDCE
33.5 HP* Caterpillar 3 Cylinder
Liquid Cooled Diesel
183 cm - 72” iCDTM Deck
Rear discharge with standard mulching insert
IS5100ZC33D72SDCE
33.5 HP* Caterpillar 3 Cylinder
Liquid Cooled Diesel
183 cm - 72” iCDTM Deck
Side Discharge with optional mulching kit
ENGINE GROUP
• Caterpillar three cylinder liquid
cooled diesel engine delivers more
torque at a lower rpm for increased
power when needed (79,9 Nm
@3000 rpm).
• Two-stage industrial air-cleaner.
• Rugged twin 28.4 litre fuel tanks
(56.8 litres total).
• Primary and secondary fuel filters
for added long term protection.
• Automotive style hood latch for
easier service access.
OPERATOR CONTROL &
COMFORT SYSTEMS
• Expanded operator compartment
includes ergonomic control panels
featuring a cup-holder, cell phone
pocket, 12-volt outlet and storage
compartment.
• Folding Roll Over Protection
Structure (ROPS) with retractable
seat belt.
• Heavy duty integrated rear bumper
for engine compartment protection.
• Foot operated hydraulic deck
lift system.
• Standard deluxe high back seat.
19
KM/H
GROUND SPEED
* POWER RATED BY ENGINE MANUFACTURER.
MOWER DECK
• Available in 183 cm side or
155 cm / 183 cm rear discharge
cutting width with iCDTM
Technology.
• Cutting height: 3.8 - 15.2 cm /
1,5-6,0 inches adjusts in 0.6 cm
increments.
• HerculesTM cast-iron mower
spindles, top greaseable.
SUSPENSION / CHASSIS
• Patented four-wheel suspension
system dramatically increases
quality of cut and operator comfort.
• Industry leading 6 mm thick
tubular steel frame rails.
ACCESSORIES
• iCDTM Mulch kit 183 cm
side discharge.
• Trailer hitch kit.
• Suspension seat kit.
• Flat free caster tyres.
• 360° anti-scalp caster wheel kit.
• Dedicated Ferris mulching blades.
www.FerrisIndustries.eu | 11
HerculesTM cast-iron mower
spindles with oversized 62 mm
tapered roller bearings, 31.5
mm shaft and 26 cm 6-bolt
flange design.
1500cc, 33.5-hp Caterpillar
(model C1.5) diesel engine
is the best in its class. 6.000
hours expected engine life,
legendary reliability.
The iCDTM Cutting System
allows better airflow, superior
cut quality and complements
the innovation of the Ferris
line.
Ferris uses industry leading
6 mm thick frame.
Dual coil-over-shock rear
suspension with dual cast
iron suspension arms and
front independent adjustable
coil-over shocks.
The foot operated hydraulic
deck lift system makes
raising and lowering the
deck effortless.
IS® 2500Z
The IS® 2500Z series includes a variety of premium performance, comfort and convenient features that
add even greater customer value to an already best-selling design. This mower offers supreme quality
and reliability, plus an extraordinary package of features and benefits. One lap on this machine and you
will know… Ferris has done it again.
MODEL
ENGINE
DECK
IS2500ZY24D52SDCE
24 HP* Yanmar 3 Cylinder
Liquid Cooled Diesel
132 cm - 52” iCDTM Deck
Side discharge with optional mulching kit
IS2500ZY24D52RDCE
24 HP* Yanmar 3 Cylinder
Liquid Cooled Diesel
132 cm - 52” iCDTM Deck
Rear discharge with standard mulching insert
IS2500ZY24D61SDCE
24 HP* Yanmar 3 Cylinder
Liquid Cooled Diesel
155 cm - 61” iCDTM Deck
Side discharge with optional mulching kit
IS2500ZY24D61RDCE
24 HP* Yanmar 3 Cylinder
Liquid Cooled Diesel
155 cm - 61” iCDTM Deck
Rear discharge with standard mulching insert
ENGINE GROUP
• Powered by 24-hp Yanmar three
cylinder liquid cooled diesel engine.
• Rugged twin 21 litre fuel tanks
(42 litres total).
• Two-stage industrial air-cleaner.
OPERATOR CONTROL &
COMFORT SYSTEMS
• Full suspension.
• Excellent Manoeuvrability.
• Pedal lift and lower with single
pin height of cut adjustment.
• Folding roll over protection
structure ROPS with retractable
seat belt.
• Comfortable seat with added
lumbar support.
MOWER DECK
• Available in 132 cm and 155 cm
side and rear discharge cutting
width with iCDTM Technology.
• Cutting height: 3.8 - 12.7 cm /
1.5 - 5 inch adjusts in 0.6 cm
increments.
16
KM/H
GROUND SPEED
* POWER RATED BY ENGINE MANUFACTURER.
• Top greaseable aluminum spindles
on 132 cm mowers and top
greasable cast iron spindles on
155 cm models.
• Flexible rubber discharge chute.
SUSPENSION / CHASSIS
• Patented four-wheel suspension
system dramatically increases
quality of cut and operator comfort.
ACCESSORIES
• iCDTM Mulch kit 132 cm side
discharge.
• iCDTM Mulch kit 155 cm side
discharge.
• Trailer hitch kit.
• Suspension seat kit.
• Light kit (non road use).
• Flat free caster tyres.
• Dedicated Ferris mulching blades.
www.FerrisIndustries.eu | 13
Suspension system consists of
rear coil-over-shocks and front
independant adjustable coilover-shocks.
The foot operated deck
lift takes the effort out of
adjusting cutting height.
Efficient YanmarTM 3 cylinder
diesel engine (model
3TNM72).
Fans mounted on top of
pumps assist in cooling of
hydro system and repelling
debris.
Features top greaseable
cast iron (61” models) and
aluminum (52” models)
spindles for longer useable
life.
The iCDTM Cutting System
allows better airflow,
superior cut quality and
complements the innovation
of the Ferris line.
IS® 600Z and IS® 700Z
If you are looking for the best value in a compact zero-turn mower, look no further
than the Ferris IS® 600Z and IS® 700Z. Featuring our patented suspension technology,
iCDTM cutting deck technology, heavy-duty Hydro-Gear® drive system, an engine
purpose built for a zero-turn application and mowing speeds up to 16 km/h.
These mowers are full of features to provide maximum productivity.
The IS® 600Z and IS® 700Z are capable of tackling tight places, providing
maximum maneuvrability and productivity. You’ll mow more lawn in less time.
MODEL
ENGINE
DECK
IS600ZB2544RDCE
25 HP* Briggs & Stratton V-Twin
Commercial Turf SeriesTM Petrol
112 cm - 44” Deck
Rear discharge with standard mulching insert
IS700ZB2752RDCE
27 HP* Briggs & Stratton V-Twin
Commercial Turf SeriesTM Petrol
132 cm - 52” iCDTM Deck
Rear discharge with standard mulching insert
ENGINE GROUP
• Powered by Briggs & Stratton
V-Twin Commercial Turf SeriesTM
air cooled petrol engines.
• Patented advanced 5 step debris
management system with
integrated cyclonic air cleaner.
• Easy to use oil drain tube.
• Rugged 21 litre fuel tank.
DRIVE SYSTEM
• Independent, commercial grade
Hydro-Gear® ZT-3400 transaxles,
features 18 cm cooling fans that
also assist with repelling debris.
MOWER DECK
•Available in 112 cm and
132 cm cutting widths.
•iCDTM Cutting deck technology
(132 cm).
•Standard mulching insert.
•Foot operated deck lift.
•Cutting height: 3.8 - 11.4 cm
(112 cm) 3.8 - 12.7 cm (132 cm).
•Features top greaseable aluminium
spindles.
SUSPENSION
• Patented suspension system
enables you to mow rougher
ground faster, with a consistent
cut quality, allowing you to be
more productive.
* POWER RATED BY ENGINE MANUFACTURER.
CHASSIS
• Removable floor plate provides
easy maintenance access to deck
components.
• Ergonomic control panels feature
a cup/holder and fuel gauge for
operator convenience.
• Adjustable contour seat
with arm rests.
• Heavy duty integrated rear bumper
protects the engine compartment.
• Folding Roll Over Protection
Structure (ROPS) with retractable
seat belt.
• Pre-wired for simple installation
of optional headlight kit
(non road use).
ACCESSORIES
• Trailer hitch kit.
• Head light kit (non road use).
• Flat free caster tyres.
• Dedicated Ferris
mulching blades.
IS® 600Z
14
KM/H
GROUND SPEED
IS® 700Z
16
KM/H
GROUND SPEED
www.FerrisIndustries.eu | 15
Suspension system with
independent rear coil-overshocks (shown) and pivoting
front axle with front ride
dampening shocks.
Features top greaseable
aluminium spindles for
longer usable life.
180° folding ROPS (Roll Over
Protection Structure) with
retractable seat belt.
Heavy Duty bumper protects
the engine while also
allowing for easy service
access.
Removable floor plate
provides convenient access
to the top of the deck for
easy cleaning and
maintenance.
Commercial independent
Hydro-Gear® ZT-3400
transaxles, designed for
high performance and
fully serviceable.
Briggs & Stratton Commercial Turf SeriesTM V-Twin
air-cooled petrol engines.
Features a 5 step debris
management system with
integrated cyclonic air
cleaner.
A patent pending
suspension and steering
system providing a
comfortable ride with
exceptionally smooth
steering performance.
F800X
The visibility and versatility of the Ferris® F800X cannot be beaten. Its out-front design is perfect
for reaching under hedgerows and to trim around trees, bushes and landscaped areas with ease.
Thanks to the zero-turn steering system the machine is extremely manoeuvrable. The machine is
standard equipped with an electric deck lift which also provides a nearly vertical fold position for
easy access to the underside of the deck for cleaning and maintenance.
MODEL
ENGINE
DECK
F800XY30D61SDCE
30 HP* Yanmar 3 Cylinder
Liquid Cooled Diesel
155 cm - 61” iCDTM Deck
Side Discharge with optional mulching kit
F800XY30D61RDCE
30 HP* Yanmar 3 Cylinder
Liquid Cooled Diesel
155 cm - 61” iCDTM Deck
Rear Discharge with standard mulching insert
ENGINE GROUP
•Powered by 30-hp Yanmar three
cylinder liquid cooled diesel engine
(model 3TNV82A).
• Two-stage industrial air-cleaner.
• Rugged twin 27 litre fuel tanks
(54 litre total).
OPERATOR CONTROL &
COMFORT SYSTEMS
• Excellent Manoeuvrability.
•Standard pivoting two-wheel
rear axle.
• Floating front frame.
•Foot-operated and electric
deck-lift with single pin cutting
height adjustment.
•Foldable ROPS with retractable
seat-belt.
•Comfortable seat with added
lumbar support.
•Dedicated Ferris mulching blades.
ACCESSORIES
•iCDTM Mulch kit 155 cm side
discharge.
•Flat free caster tyres front and
rear wheels.
• Dedicated Ferris mulching blades.
16
KM/H
GROUND SPEED
* POWER RATED BY ENGINE MANUFACTURER.
www.FerrisIndustries.eu | 17
Turf friendly chevron tyres provide maximum traction.
Comfortable seat with added
lumbar support.
The iCDTM Cutting System
allows better airflow,
superior cut quality and
complements the innovation
of the Ferris line.
The pivoting rear axle in
conjunction with the
floating front frame allows
the F800X to follow the
contours for a precise
accurate finish.
Electric deck lift for easy
cut height adjustment.
The deck can be raised to
a near vertical position for
easy access during periodic
maintenance.
The F800X is specially
designed for easy
maintenance and
accessibility.
EVOLUTIONTM
The forward thinking design of the Ferris® EvolutionTM mower allows the operator to be placed in the
most ideal ergonomic position to mow, which is much more comfortable than a stand-on mower.
The operators back, shoulders and neck are aligned to minimize discomfort and fatigue. The operators
weight is evenly distributed providing comfort throughout the day. Integrated suspension technology
heightens the riding experience and delivers outstanding comfort and performance. Especially suitable
for the medium-sized gardens that are not accessible with a large machine, but which are too large for
an ordinary walk-behind mower.
MODEL
EVKAV1936SDCE
ENGINE
DECK
19 HP* Kawasaki V-Twin
FH580V Air Cooled Petrol
91 cm - 36” Deck
Side discharge with optional mulching
ENGINE GROUP
•Powered by 19-hp Kawasaki
FH580V V-Twin air cooled
petrol engine.
• Two stage air cleaner.
• Rugged 19 litre fuel tank.
OPERATOR CONTROL &
COMFORT SYSTEMS
•Patented Operator Forward
Design and Ergonomics.
• Unsurpassed manoeuvrability.
SUSPENSION / CHASSIS
• Steel ladder frame chassis.
•Patented fully suspended
operators platform and front
axle for operator comfort.
ACCESSORIES
• Grass Catcher.
• Mulch kit 91 cm side discharge.
• Flat free caster tyres.
• Dedicated Ferris mulching blades.
MOWER DECK
• Available with 91 cm / 36” side discharge cutting deck.
•Cutting height 3,8-10.6 cm / 1.5
to 4 inches.
• Top greaseable aluminum spindles.
Operator is placed in the most
ideal ergonomic position to mow.
12
KM/H
GROUND SPEED
* POWER RATED BY ENGINE MANUFACTURER.
www.FerrisIndustries.eu | 19
Seat Design.
The contoured seat adjusts
in four height and two length
positions to customize your
ride.
Cutting height system.
The Ferris EvolutionTM
mower features an easyto-use height of cut system.
Simply crank the height of
cut lever to your desired
cutting height. A convenient
transport lever makes lifting
the entire deck quick and
easy.
Knee Pads.
The knee pads provide the
operator with extra comfort.
Controls.
All the operators controls
are positioned in the
suspended area of the
operator platform. A central
bar allows the operator to
grip against and to make
smooth speed changes
and supports as well when
mounting and dismounting
the machine.
Operator Forward Design.
The patented operator
forward design places the
operator in the most ideal
ergonomic position for a
long day of mowing.
A fully adjustable shock
absorber holds the entire
operators platform
minimizing the transfer of
shocks from the ground
back though to the operator,
providing an industry
leading level of comfort in
such a compact machine.
WALK-BEHIND MOWERS
www.FerrisIndustries.eu | 21
WALK-BEHINDS
When you have got to walk the landscape, there
is no better way than with a Ferris ® walk-behind
mower. Just like our ride-on mowers, we have
engineered our walk-behinds to incorporate
innovation and simplicity by design. For example,
our ComfortControl TM DD gives users the option to
set their speed with our Cruise Control Bar along
with the ability to override speed and direction
with the thumb controls. And when equipped
with the flail mower cutting head, the
ComfortControl TM DD-FM mower is prepared
to combat the most demanding environments
of overgrown area control.
The HydroCutTM features a single hydrostatic
transmission and is an affordable alternative to
belt-drive mowers. Be more productive with our
operator-friendly, super-tough walk-behinds with
easy access to service components for years of
dependable operation.
COMFORT CONTROLTM DD-FW35
The FW35 dual hydrostatic walk-behind mower was built
from the ground up to meet the demands of professional
mowing crews. The new design gives this mower smoother
and more user-friendly operation. Featuring a cruise control bar,
independent retraction lever steering, thumb controlled
speed override, foot operated return-to-neutral controls and
a speed indicator. The super tough built, 6mm thick engine
deck, offers a low center point of gravity and a wide stance
that result in unparalleled traction and stability.
MODEL
ENGINE
DECK
FW35KAV2148RDCE
20,5 HP*
Kawasaki V-Twin
FX651V Air Cooled Petrol
122 cm - 48” Deck
Rear discharge with
standard mulching insert
FW35KAV2152RDCE
20,5 HP*
Kawasaki V-Twin
FX651V Air Cooled Petrol
132 cm - 52” Deck
Rear discharge with
standard mulching insert
ENGINE GROUP
•Powered by Kawasaki FX651V Series
air cooled petrol engine.
• Two stage industrial air cleaner.
• Electric start.
• Easy to use oil drain tube.
• 19 litres fuel tank.
DRIVE SYSTEM
The deck is easily adjusted
by the single-point quick
adjust lever which can be
locked away securely.
New centralized foot control
for neutral position provides
the operator with a more
natural control. The neutral
position is identified on the
speed indicator on the dash.
Reliably set your speed with
the new cruise control bar
featuring a convenient speed
indicator.
•Independent, commercial grade Hydro-Gear®
ZT-3100 transaxles, features 18 cm cooling fans
that also assist with repelling debris.
•Dual elevated hydro fluid reservoirs and
dual hydro filters.
• Ground speed up to 11 km/h.
• Easy access to tracking adjustment.
MOWER DECK
•Available in 122 cm and 132 cm cutting widths.
•3,5mm Fabricated deck construction with double top
deck, overlap welded corners and double reinforced
side skirts and steel reinforced leading edge.
• Single lever cutting height adjustment, loackable.
• Cutting height: 3.8 - 12.0 cm.
• Features top greaseable aluminium spindles.
CHASSIS
Narrow transmission guards
reduce debris built up to
improve air flow and allow
for access to the oil filter
for maintenance.
11
The new mower deck
mounting system provides
easier deck leveling, improved
flexibility over terrain, and
more durable wear points
for reduced maintenance.
KM/H
GROUND SPEED
Deck drive belt system is
designed to provide even belt
tension which improves the
life of the belt and reduces
maintenance.
•Heavy duty 3,0 mm, 38x51 mm frame rails.
• 6,35 mm Engine mounting platform.
• Flat free caster tyres.
•Convenient built in tie-down points for securing
equipment.
•Control rods securely placed above the engine deck
and within the handle bars for optimized protection
against damage and dirt.
ACCESSORIES
• Dedicated Ferris mulching blades.
* POWER RATED BY ENGINE MANUFACTURER.
COMFORT CONTROLTM DD-FM30
| 23
The Comfort ControlTM DD-FM SeriesTM walk-behind flail mower is designed to
combat the most demanding environments and is ideal for mowing rough and
overgrown areas. The strong welded steel construction houses a robust flail rotor
of 122 cm cutting width with 34 independent flail blades which deliver excellent
cutting action. This efficient flail mower is designed to excel in applications such as
landscaping, agriculture, utility, maintenance, construction sites, road right-of-ways,
trails, and all other areas needing brush or overgrown area control. Cut, mulch and
spread, leaving a fine finish, with the FM SeriesTM walk-behind flail mower.
MODEL
F30KAV2448FLCE
ENGINE
DECK
23.5 HP* Kawasaki V-Twin
Air Cooled
FX730V
AirPetrol
Cooled Petrol
122 cm - 48” Deck
Flail mower
9,6
KM/H
GROUND SPEED
ENGINE GROUP
•Powered by 23.5-hp Kawasaki FX730V
Series V-Twin air cooled petrol engine.
• Rugged 19 litres fuel tank.
• Electric start standard.
DRIVE SYSTEM
34 J-type flail cutters,
rotor bearing debris shields
and flexible rubber debris
guards.
Impact protective guards
to avoid damage to rotor
bearings and belt drive
system.
Rotor bearing protection
and adjustable hardened
skid plates.
•Independent, commercial grade Hydro-Gear®
ZT-3100 transaxles, features 18 cm cooling fans
that also assist with repelling debris.
•Dual elevated hydro fluid reservoirs and dual hydro filters.
• Ground speed up to 9,6 km/h.
• Easy access to tracking adjustment.
FLAIL HEAD
•Available with 122 cm flail mower cutting width.
•Cutting height: 5.0 - 8.9 cm / 2.0 - 3.5 inches.
• 6 Height of cut positions.
• 34 swinging flail cutters.
Strong shaft driven
construction with gearbox
and universal joint between
engine and flail rotor.
More than 180 degree belt
wrap on drive system from
shaft drive to flail rotor.
Rotor drive powered by a
duplex belt.
* POWER RATED BY ENGINE MANUFACTURER.
Swept lug design which
is more forgiving for
accidental impacts.
OPERATOR CONTROL & COMFORT SYSTEMS
•Steel channel handlebars for increased strength
and durability.
•Operator friendly controls are comfortable and easy to use.
•20” Drive tyres with chevron tread.
•Flat free caster tyres assembly.
• Overall width front bumper.
COMFORT CONTROLTM DD
The Comfort ControlTM DD series is built super-tough, with a low,
wide stance that results in unparalleled traction and stability.
The new “Comfort Control” design gives this mower the
smoothest, most user-friendly operation in the industry.
The Cruise Control Bar with independent steering override
allows the operator a multitude of handling options.
MODEL
ENGINE
DECK
CCWKAV1536SDCE
15 HP* Kawasaki V-Twin
Air Cooled
FS541V
AirPetrol
Cooled Petrol
91 cm - 36” Deck
Side discharge with optional mulching kit
CCWKAV1536RDCE
15 HP* Kawasaki V-Twin
FS541V Air Cooled Petrol
91 cm - 36” Deck
Rear discharge with optional mulching kit
9,6
KM/H
GROUND SPEED
ENGINE GROUP
•Powered by 15 HP* Kawasaki FS541V
Series V-Twin air cooled petrol engine.
•Rugged 19 litres fuel tank with extra large filler neck.
•Electric start standard on all models.
MOWER DECK
Centrally mounted speed control with
individual controls left and right for
steering.
Quick access to
transmission release.
•Available in 91 cm side and rear discharge cutting widths.
•Cutting height: 4.4 - 12 cm / 1.7- 4,7 inches infinite variable adjustable.
•Quick-adjust deck allows operator to change cut height quickly and easily.
•Self-contained dual transmissions are individually fan cooled and filtered.
• Features top greaseable aluminum spindles for longer useable life.
OPERATOR CONTROL & COMFORT SYSTEMS
•Steel channel handlebars for increased strength and durability.
•Operator friendly cushioned controls are comfortable and easy to use.
• Flat free caster tyres.
ACCESSORIES
Double quick adjust cutting height
adjustment levers.
* POWER RATED BY ENGINE MANUFACTURER.
Easy height-of-cut read out.
•Mulch kit 91 cm side discharge.
•Mulch kit 91 cm rear discharge.
•Grass collector on 36” side discharge model.
•Dedicated Ferris mulching blades.
HYDRO CUTTM
www.FerrisIndustries.eu | 25
The HydroCutTM Single Drive series is a class by itself. The single
hydrostatic transmission found on the HydroCut makes this
mower extremely easy to operate. It offers many productivity
enhancing features including Integrated Comfort Controls (ICC)
for simple manoeuvering and Quick-Adjust height of- cut control.
Available in 81 cm cutting width, this machine can tackle tight
places and tight budgets too.
MODEL
ENGINE
DECK
HCKAV1532SDCE
15 HP* Kawasaki V-Twin
FS541V Air Cooled Petrol
81 cm - 32” Deck
Side discharge with optional mulching kit
HCKAV1532RDCE
15 HP* Kawasaki V-Twin
FS541V Air Cooled Petrol
81 cm - 32” Deck
Rear discharge
8,8
KM/H
GROUND SPEED
ENGINE GROUP
•Powered by 15 HP* Kawasaki FS541V Series
V-Twin air cooled petrol engine.
• Rugged 19 litre fuel tank with extra large filler neck.
• Hydrostatic transmission is more efficient and productive
than gear-drive mowers.
• Electric start standard for operator convenience.
Height-of-cut indicator
ensures consistent results.
The deck is easily adjusted
by the quick-adjust lever.
Cutting height ranges from
3.8 - 11.5 cm.
MOWER DECK
• Available in 81 cm side and rear discharge cutting width.
• Cutting height: 3.8 - 11.5 cm / 1.5 - 4,5 inches variable adjust.
• Quick-adjust variable height-of-cut control is fast and easy.
• Features top greaseable aluminum spindles for longer useable life.
OPERATOR CONTROL & COMFORT SYSTEMS
•Integrated Comfort Controls (ICC) are user-friendly and can be operated
with just one hand.
ACCESSORIES
The convenience of electric
start is a standard feature.
Integrated Comfort Controls (ICCTM)
are thumb operated. No need to
take your hands off the handlebars
to adjust speed or direction, forward
& backward. So simple to use it can
be operated with just one hand!
• Mulch kit 81 cm side discharge.
•Grass collector on 32” side discharge model.
• Flat free caster tyres.
• Dedicated Ferris mulching blades.
* POWER RATED BY ENGINE MANUFACTURER.
ACCESSORIES
GRASS CATCHER:
MULCH KIT:
Comes with baffles, hardware
and instruction sheet. Select kits
include dedicated blades.
For following light duty trailers.
TRAILER HITCH KIT:
LIGHT KIT:
360° ANTI SCALP WHEEL
CASTER KIT
SUSPENSION SEAT:
SUSPENSION SEAT INSERT:
FLAT-FREE CASTER TYRES:
A lightweight durable fabric
bag with hard plastic bottom
attaches quickly.
ACCESSORIES
Grass Catcher
Mulch Kit
Mulch Blades
Trailer Hitch Kit
Light Kit (non road)
360° Anti Scalp Wheel Caster Kit
Suspension Seat
Suspension Seat Insert
Flat-Free Caster Tyres
ACCESSORIES
Grass Catcher
Mulch Kit
Mulch Blades
Trailer Hitch Kit
Light Kit (non road)
360° Anti Scalp Wheel Caster Kit
Suspension Seat
Suspension Seat Insert
Flat-Free Caster Tyres
• = Optional
STD = Standard
Suspension seat for optimal
comfort.
IS® 5100Z
61” RD 72” SD 72” RD
STD
•
•
•
•
•
STD
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Add this to the premium adjustable seat for increased comfort.
52” SD
Zero-Turns
IS® 2500Z
52” RD 61” SD 61” RD
•
•
Run all day with no flats,
eliminates down time.
IS® 600Z
44” RD
IS® 700Z
52” RD
•
•
•
•
STD
•
•
•
•
•
•
•
STD
•
•
•
STD
•
•
•
STD
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Front Mower
Zero-Turn
CCTM DD
F800X
EVOTM
61” SD 61” RD 36” SD 48” RD 52” RD
•
•
STD
•
STD
STD
•
•
•
•
•
•
Select models are pre-wired for
simple installation (non road).
STD
STD
Walk-Behinds
CCTM DD-FM
CCTM DD
48” FLAIL
36” SD 36” RD
•
•
•
•
•
STD
STD
STD
HCTM
32” SD 32” RD
•
•
•
•
•
80% 100%80% 100%80% 100%80% 100%80% 100%80% 100% 80% 100%
81 81 91 91 112112122 122132132155155183183
0.39 0.490.440.550.540.670.59 0.730.63 0.790.74 0.93 0.88 1.10
0.42 0.530.470.590.580.730.63 0.790.69 0.860.81 1.01 0.95 1.19
0.45 0.570.510.640.630.780.68 0.850.74 0.920.87 1.09 1.02 1.28
0.49 0.610.550.680.670.840.73 0.920.79 0.990.93 1.16 1.10 1.37
0.52 0.650.580.730.720.900.78 0.980.84 1.060.99 1.24 1.17 1.46
0.55 0.690.620.770.760.950.83 1.040.90 1.121.05 1.32 1.24 1.56
0.58 0.730.660.820.811.010.88 1.100.95 1.191.12 1.40 1.32 1.65
0.62 0.770.690.860.851.060.93 1.161.00 1.251.18 1.47 1.39 1.74
0.65 0.810.730.910.901.120.98 1.221.06 1.321.24 1.55 1.46 1.83
0.68 0.850.760.960.941.181.02 1.281.11 1.391.30 1.63 1.54 1.92
0.71 0.890.801.000.991.231.07 1.341.16 1.451.36 1.71 1.61 2.01
0.75 0.930.841.051.031.291.12 1.401.21 1.521.43 1.78 1.68 2.10
0.78 0.970.871.091.081.341.17 1.461.27 1.581.49 1.86 1.76 2.20
0.81 1.010.911.141.121.401.22 1.531.32 1.651.55 1.94 1.83 2.29
0.84 1.050.951.181.161.461.27 1.591.37 1.721.61 2.02 1.90 2.38
0.87 1.090.981.231.211.511.32 1.651.43 1.781.67 2.09 1.98 2.47
0.91 1.131.021.271.251.571.37 1.711.48 1.851.74 2.17 2.05 2.56
0.94 1.171.061.321.301.621.42 1.771.53 1.911.80 2.25 2.12 2.65
0.97 1.221.091.371.341.681.46 1.831.58 1.981.86 2.33 2.20 2.75
1.00 1.261.131.411.391.741.51 1.891.64 2.051.92 2.40 2.27 2.84
1.04 1.301.161.461.431.791.56 1.951.69 2.111.98 2.48 2.34 2.93
1.07 1.341.201.501.481.851.61 2.011.74 2.182.05 2.56 2.42 3.02
1.10 1.381.241.551.521.901.66 2.071.80 2.242.11 2.64 2.49 3.11
1.13 1.421.271.591.571.961.71 2.141.85 2.312.17 2.71 2.56 3.20
1.17 1.461.311.641.612.021.76 2.201.90 2.382.23 2.79 2.64 3.29
1.20 1.501.351.681.662.071.81 2.261.95 2.442.29 2.87 2.71 3.39
1.23 1.541.381.731.702.131.85 2.322.01 2.512.36 2.95 2.78 3.48
EFFICIENCY WIDTH CM
CUTTING
GROUND SPEED KM/H
KM
6.0
6.5
7.0
7.5
8.0
8.5
9.0
9.5
10.0
10.5
11.0
11.5
12.0
12.5
13.0
13.5
14.0
14.5
15.0
15.5
16.0
16.5
17.0
17.5
18.0
18.5
19.0
80% EFFICIENCY IS FOR AVERAGE USE WITH TURNS. FLOWERBEDS ETC.
PRODUCTIVITY HECTARES PER HOUR:
1 HECTARE IS 10.000 M2
GRASSCUTTING PRODUCTIVITY TABLE
www.FerrisIndustries.eu | 27
SPECIFICATIONS
IS®5100ZC33D72RDCE
IS®5100ZC33D72SDCE
ENGINE
Caterpillar - Diesel
C1.5
33.5 HP
3 Cylinders in line
Liquid cooled
Electric PTO clutch
Electric
56 Litres
Caterpillar - Diesel
C1.5
33.5 HP
3 Cylinders in line
Liquid cooled
Electric PTO clutch
Electric
56 Litres
183 cm / 72”
Rear Discharge iCD™
Standard mulch insert
3.8 - 15.2 cm
4.6 mm fabricated construction, full width double top
deck, 12.7 mm scuff guards, 12,7 mm front bumper bar,
overlap welded corners
Cast iron 257 mm, 31,75 mm shaft
Hydraulic
183 cm / 72”
Side Discharge iCD™
Optional mulching kit
3.8 - 15.2 cm
4.6 mm fabricated construction, full width double top
deck, 12.7 mm scuff guards, 12,7 mm front bumper bar,
overlap welded corners
Cast iron 257 mm, 31,75 mm shaft
Hydraulic
Suspension
4-Wheel independant suspension
4-Wheel independant suspension
Transmission
Individual Hydro Gear pumps and Parker wheel motors
31.75 mm Tapered with 5-bolt flange
26 x 12.00 - 12 (4 ply)
13 x 6.50 - 6 (4 ply)
Individual Hydro Gear pumps and Parker wheel motors
31.75 mm Tapered with 5-bolt flange
26 x 12.00 - 12 (4 ply)
13 x 6.50 - 6 (4 ply)
0 - 19,3 km/h
0 - 9.6 km/h
0 - 19,3 km/h
0 - 9.6 km/h
255 cm
186
n.a.
1070
255 cm
198
221
1070
Standard, foldable with seat belt
Fuel level gauge in each tank, visual water temperature
gauge, oil pressure gauge, hour meter
Seat activated engine kill, PTO clutch safety switch,
neutral and parking brake safety circuit
Disc type
Standard, foldable with seat belt
Fuel level gauge in each tank, visual water temperature
gauge, oil pressure gauge, hour meter
Seat activated engine kill, PTO clutch safety switch,
neutral and parking brake safety circuit
Disc type
2-Year Manufacturer’s Warranty
2-Year Manufacturer’s Warranty
2- Year commercial use, front-to-rear, parts & labor
excluding belts, tyres, brake pads, battery and blades
2-Year Manufacturer’s Warranty
2-Year Manufacturer’s Warranty
2- Year commercial use, front-to-rear, parts & labor
excluding belts, tyres, brake pads, battery and blades
Make
Model
Horsepower
Cylinders
Cooling
PTO
Starting
Fuel Capacity (litres)
MOWER
Cutting width (cm/inch)
Mulching system
Cutting Height (cm)
Deck Construction
Mower Spindles
Deck lift system
SUSPENSION & DRIVE TRAIN
Drive Axles
Drive Tyres (inch)
Caster Tyres (inch)
GROUND SPEED
Speed-fwd. (km/h)
Speed-rev. (km/h)
DIMENSIONS
Overall length (cm)
Overall width (cm)
Overall width deflector down (cm)
Dry weight (Kgs)
OPERATOR CONTROL & COMFORT SYSTEMS
Certified Roll-Over Protection Structure
Instrumentation
Controls - Safety Group
Parking Brake / Safety Circuit
WARRANTY
Engine
Transmission
Balance of machine
www.FerrisIndustries.eu | 29
IS®5100ZC33D61RDCE
IS®2500ZY24D61RDCE
ENGINE
Caterpillar - Diesel
C1.5
33.5 HP
3 Cylinders in line
Liquid cooled
Electric PTO clutch
Electric
56 Litres
Yanmar - Diesel
3TNM72
24 HP
3 Cylinders in line
Liquid cooled
Electric PTO clutch
Electric
42 Litres
155 cm / 61”
Rear Discharge iCD™
Standard mulch insert
3.8 - 15.2 cm
4.6 mm fabricated construction, full width double top
deck, 12.7 mm scuff guards, 12,7 mm front bumper bar,
overlap welded corners
Cast iron 257 mm, 31,75 mm shaft
Hydraulic
155 cm / 61”
Rear Discharge iCD™
Standard mulch insert
3.8 - 12.7 cm
4.6 mm fabricated construction, full width double top
deck, 12.7 mm scuff guards, 12,7 mm front bumper bar,
overlap welded corners
Cast iron 201 mm, 25,4 mm shaft
Foot pedal, spring assisted
Suspension
4-Wheel independant suspension
4-Wheel independant suspension
Transmission
Individual Hydro Gear pumps and Parker wheel motors
31.75 mm Tapered with 5-bolt flange
26 x 12.00 - 12 (4 ply)
13 x 6.50 - 6 (4 ply)
Individual Hydro Gear pumps and Parker wheel motors
31.75 mm Tapered with 5-bolt flange
23 x 10.50 - 12 (4 ply)
13 x 6.50 - 6 (4 ply)
0 - 19,3 km/h
0 - 9.6 km/h
0 - 16.0 km/h
0 - 8.0 km/h
255 cm
159
n.a.
1021
211
159
n.a.
712
Standard, foldable with seat belt
Fuel level gauge in each tank, visual water temperature
gauge, oil pressure gauge, hour meter
Seat activated engine kill, PTO clutch safety switch,
neutral and parking brake safety circuit
Disc type
Standard, foldable with seat belt
Fuel level gauge in each tank, visual water temperature
gauge, oil pressure gauge, hour meter
Seat activated engine kill, PTO clutch safety switch,
neutral and parking brake safety circuit
Drum type
2-Year Manufacturer’s Warranty
2-Year Manufacturer’s Warranty
2- Year commercial use, front-to-rear, parts & labor
excluding belts, tyres, brake pads, battery and blades
2-Year Manufacturer’s Warranty
2-Year Manufacturer’s Warranty
2- Year commercial use, front-to-rear, parts & labor
excluding belts, tyres, brake pads, battery and blades
Make
Model
Horsepower
Cylinders
Cooling
PTO
Starting
Fuel Capacity (litres)
MOWER
Cutting width (cm/inch)
Mulching system
Cutting Height (cm)
Deck Construction
Mower Spindles
Deck lift system
SUSPENSION & DRIVE TRAIN
Drive Axles
Drive Tyres (inch)
Caster Tyres (inch)
GROUND SPEED
Speed-fwd. (km/h)
Speed-rev. (km/h)
DIMENSIONS
Overall length (cm)
Overall width (cm)
Overall width deflector down (cm)
Dry weight (Kgs)
OPERATOR CONTROL & COMFORT SYSTEMS
Certified Roll-Over Protection Structure
Instrumentation
Controls - Safety Group
Parking Brake / Safety Circuit
WARRANTY
Engine
Transmission
Balance of machine
SPECIFICATIONS
IS®2500ZY24D61SDCE
IS®2500ZY24D52RDCE
IS®2500ZY24D52SDCE
Yanmar - Diesel
3TNM72
24 HP
3 Cylinders in line
Liquid cooled
Electric PTO clutch
Electric
42 Litres
Yanmar - Diesel
3TNM72
24 HP
3 Cylinders in line
Liquid cooled
Electric PTO clutch
Electric
42 Litres
Yanmar - Diesel
3TNM72
24 HP
3 Cylinders in line
Liquid cooled
Electric PTO clutch
Electric
42 Litres
155 cm / 61”
Side Discharge iCD™
Optional mulching kit
3.8 - 12.7 cm
4.6 mm fabricated construction, full width double top
deck, 12.7 mm scuff guards, 12,7 mm front bumper bar,
overlap welded corners
Cast iron 201 mm, 25,4 mm shaft
Foot pedal, spring assisted
132 cm / 52”
Rear Discharge iCD™
Standard mulch insert
3.8 - 12.7 cm
4.6 mm fabricated construction, full width double top
deck, 12.7 mm scuff guards, 9,5 mm front bumper bar,
overlap welded corners
Cast aluminium 133 mm, 25,4 mm shaft
Foot pedal, spring assisted
132 cm / 52”
Side Discharge iCD™
Optional mulching kit
3.8 - 12.7 cm
4.6 mm fabricated construction, full width double top
deck, 12.7 mm scuff guards, 9,5 mm front bumper bar,
overlap welded corners
Cast aluminium 133 mm, 25,4 mm shaft
Foot pedal, spring assisted
4-Wheel independant suspension
4-Wheel independant suspension
4-Wheel independant suspension
Individual Hydro Gear pumps and Parker wheel motors
31.75 mm Tapered with 5-bolt flange
23 x 10.50 - 12 (4 ply)
13 x 6.50 - 6 (4 ply)
Individual Hydro Gear pumps and Parker wheel motors
31.75 mm Tapered with 5-bolt flange
23 x 9.50 - 12 (4 ply)
13 x 5.00 - 6 (4 ply)
Individual Hydro Gear pumps and Parker wheel motors
31.75 mm Tapered with 5-bolt flange
23 x 9.50 - 12 (4 ply)
13 x 5.00 - 6 (4 ply)
0 - 16.0 km/h
0 - 8.0 km/h
0 - 16.0 km/h
0 - 8.0 km/h
0 - 16.0 km/h
0 - 8.0 km/h
211
171
194
712
211
135
n.a.
707
211
147
170
707
Standard, foldable with seat belt
Fuel level gauge in each tank, visual water temperature
gauge, oil pressure gauge, hour meter
Seat activated engine kill, PTO clutch safety switch,
neutral and parking brake safety circuit
Drum type
Standard, foldable with seat belt
Fuel level gauge in each tank, visual water temperature
gauge, oil pressure gauge, hour meter
Seat activated engine kill, PTO clutch safety switch,
neutral and parking brake safety circuit
Drum type
Standard, foldable with seat belt
Fuel level gauge in each tank, visual water temperature
gauge, oil pressure gauge, hour meter
Seat activated engine kill, PTO clutch safety switch,
neutral and parking brake safety circuit
Drum type
2-Year Manufacturer’s Warranty
2-Year Manufacturer’s Warranty
2- Year commercial use, front-to-rear, parts & labor
excluding belts, tyres, brake pads, battery and blades
2-Year Manufacturer’s Warranty
2-Year Manufacturer’s Warranty
2- Year commercial use, front-to-rear, parts & labor
excluding belts, tyres, brake pads, battery and blades
2-Year Manufacturer’s Warranty
2-Year Manufacturer’s Warranty
2- Year commercial use, front-to-rear, parts & labor
excluding belts, tyres, brake pads, battery and blades
www.FerrisIndustries.eu | 31
IS®700ZB2752RDCE
IS®600ZB2544RDCE
ENGINE
Make
Model
Horsepower
Cylinders
Cooling
PTO
Starting
Fuel Capacity (litres)
Briggs & Stratton - Petrol
Commercial Turf SeriesTM
27 HP
2 Cylinders V-Twin
Air cooled
Electric PTO clutch
Electric
21 Litres
Briggs & Stratton - Petrol
Commercial Turf SeriesTM
25 HP
2 Cylinders V-Twin
Air cooled
Electric PTO clutch
Electric
21 Litres
132 cm / 52”
Rear Discharge iCD™
Standard mulch insert
3.8 - 12.7 cm
3,6 mm fabricated construction, full width double top
deck, 6.4 mm scuff guards, bull nose front,
overlap welded corners
Cast aluminium 133 mm, 25,4 mm shaft
Foot pedal, spring assisted
112 cm / 44”
Rear Discharge
Standard mulch insert
3.8 - 12.7 cm
3,6 mm fabricated construction, full width double top
deck, 6.4 mm scuff guards, bull nose front,
overlap welded corners
Cast aluminium 133 mm, 25,4 mm shaft
Foot pedal, spring assisted
Rear wheel suspension, pivoting front axle
with front ride dampening shocks
Individual Hydro Gear ZT-3400 integrated transmissions
28,6 mm Tapered with 4-bolt flange
22 x 11.00 - 10 (4 ply)
13 x 5.00 - 6 (4 ply)
Rear wheel suspension, pivoting front axle
with front ride dampening shocks
Individual Hydro Gear ZT-3400 integrated transmissions
28,6 mm Tapered with 4-bolt flange
20 x 8.00 - 10 (4 ply)
11 x 4.00 - 5 (4 ply)
0 - 16.0 km/h
0 - 8.0 km/h
0 - 14.5 km/h
0 - 6.4 km/h
206
137
n.a.
480
203
117
n.a.
418
Standard, foldable with seat belt
Fuel gauge, hour meter
Standard, foldable with seat belt
Fuel gauge, hour meter
Seat activated engine kill, PTO clutch safety switch,
neutral and parking brake safety circuit
Drum type
Seat activated engine kill, PTO clutch safety switch,
neutral and parking brake safety circuit
Drum type
2-Year Manufacturer’s Warranty
2-Year Manufacturer’s Warranty
2- Year commercial use, front-to-rear, parts & labor
excluding belts, tyres, brake pads, battery and blades
2-Year Manufacturer’s Warranty
2-Year Manufacturer’s Warranty
2- Year commercial use, front-to-rear, parts & labor
excluding belts, tyres, brake pads, battery and blades
MOWER
Cutting width (cm/inch)
Mulching system
Cutting Height (cm)
Deck Construction
Mower Spindles
Deck lift system
SUSPENSION & DRIVE TRAIN
Suspension
Transmission
Drive Axles
Drive Tyres (inch)
Caster Tyres (inch)
GROUND SPEED
Speed-fwd. (km/h)
Speed-rev. (km/h)
DIMENSIONS
Overall length (cm)
Overall width (cm)
Overall width deflector down (cm)
Dry weight (Kgs)
OPERATOR CONTROL & COMFORT SYSTEMS
Certified Roll-Over Protection Structure
Instrumentation
Controls - Safety Group
Parking Brake / Safety Circuit
WARRANTY
Engine
Transmission
Balance of machine
SPECIFICATIONS
F800XY30D61RDCE
F800XY30D61SDCE
EVKAV1936SDCE
Yanmar - Diesel
3TNV82
30 HP
3 Cylinders in line
Liquid cooled
Electric PTO clutch
Electric
54 Litres
Yanmar - Diesel
3TNV82
30 HP
3 Cylinders in line
Liquid cooled
Electric PTO clutch
Electric
54 Litres
Kawasaki - Petrol
FH580V
19 HP
2 Cylinders V-Twin
Air cooled
Electric PTO clutch
Electric
19 Litres
155 cm / 61”
Rear Discharge iCD™
Standard mulch insert
3.8 - 12.7 cm
3.6 mm fabricated construction, full width double top
deck, 12.7 mm scuff guards, 12,7 mm front bumper bar,
overlap welded corners
Cast iron 201 mm, 25,4 mm shaft
Electric, foot pedal override
155 cm / 61”
Side Discharge iCD™
Optional mulching kit
3.8 - 12.7 cm
3.6 mm fabricated construction, full width double top
deck, 12.7 mm scuff guards, 12,7 mm front bumper bar,
overlap welded corners
Cast iron 201 mm, 25,4 mm shaft
Electric, foot pedal override
91 cm / 36”
Side Discharge
Optional mulching kit
3.8 - 10.6 cm
3.6 mm fabricated construction,
6.35 mm scuff guards, 6.35 mm front bumper bar,
overlap welded corners
Cast aluminium 133 mm, 25,4 mm shaft
Hand lever, spring assisted
n.a.
n.a.
Individual Hydro Gear pumps and Parker wheel motors
31.75 mm Tapered with 5-bolt flange
24 x 12.00 - 12 (4 ply)
13 x 6.50 - 6 (4 ply) / 11 x 4.00 - 5 (4 ply)
Individual Hydro Gear pumps and Parker wheel motors
31.75 mm Tapered with 5-bolt flange
24 x 12.00 - 12 (4 ply)
13 x 6.50 - 6 (4 ply) / 11 x 4.00 - 5 (4 ply)
Fully suspended operators platform, pivoting front axle
with front ride dampening shocks
Individual Hydro Gear pumps and wheel motors
25,4 mm Tapered with 4-bolt flange
18 x 8.50 - 10 (4 ply)
11 x 4.00 - 5 (4 ply)
0 - 16.0 km/h
0 - 8.0 km/h
0 - 16.0 km/h
0 - 8.0 km/h
0 - 12.0 km/h
0 - 6.0 km/h
283
159
n.a.
857
283
171
194
857
157
106
129
371
Standard, foldable with seat belt
Visual water temperature gauge, oil pressure gauge,
hour meter
Seat activated engine kill, PTO clutch safety switch,
neutral and parking brake safety circuit
Disc type
Standard, foldable with seat belt
Visual water temperature gauge, oil pressure gauge,
hour meter
Seat activated engine kill, PTO clutch safety switch,
neutral and parking brake safety circuit
Disc type
n.a.
Hour meter
Seat activated engine kill
PTO clutch safety switch, neutral and parking brake
safety circuit
Drum type
2-Year Manufacturer’s Warranty
2-Year Manufacturer’s Warranty
2- Year commercial use, front-to-rear, parts & labor
excluding belts, tyres, brake pads, battery and blades
2-Year Manufacturer’s Warranty
2-Year Manufacturer’s Warranty
2- Year commercial use, front-to-rear, parts & labor
excluding belts, tyres, brake pads, battery and blades
2-Year Manufacturer’s Warranty
2-Year Manufacturer’s Warranty
2- Year commercial use, front-to-rear, parts & labor
excluding belts, tyres, brake pads, battery and blades
www.FerrisIndustries.eu | 33
FM30KAV2448FLCE
FW35KAV2152RDCE
ENGINE
Kawasaki - Petrol
FX730V
23.5 HP
2 Cylinders V-Twin
Air cooled
Electric PTO clutch
Electric
19 Litres
Kawasaki - Petrol
FX651V
20.5 HP
2 Cylinders V-Twin
Air cooled
Electric PTO clutch
Electric
19 Litres
122 cm / 48”
Flail mower
n.a.
5.0 - 8.9 cm
3.6 / 4.6 mm fabricated construction with secondary
internal shroud
Drum type 102 mm with 34 individual swinging cutters
5 Individual spacers
122 cm / 48”
Rear Discharge
Standard mulch insert
3.8 - 12.0 cm
3.6 mm fabricated construction, full width double top
deck, 6.35 mm scuff guards, 9.5 mm front bumper bar,
overlap welded corners
Cast aluminium 133 mm, 25,4 mm shaft
Central heigth adjustment with single hand wheel
Suspension
n.a.
n.a.
Transmission
Individual Hydro Gear ZT-3100 integrated transmissions
25,4 mm Tapered with 4-bolt flange
20 x 8.00 - 10 (4 ply) chevron tread
9 x 3.50 - 4 (4 ply) flat free
Individual Hydro Gear ZT-3100 integrated transmissions
25,4 mm Tapered with 4-bolt flange
20 x 8.00 - 10 (4 ply)
11 x 4.00 - 5 (4 ply) flat free
0 - 9.6 km/h
0 - 3.2 km/h
0 - 11 km/h
0 - 3.2 km/h
210
140
n.a.
354
200
135
n.a.
370
n.a.
n.a.
n.a.
Speed indicator, hour meter
Operator presence, cruise Control Bar, independent
forward and reverse levers, Foot-activated neutral
Internal transaxle lock
Operator presence, cruise Control Bar, independent
forward and reverse levers, Foot-activated neutral
Internal transaxle lock
2-Year Manufacturer’s Warranty
2-Year Manufacturer’s Warranty
2- Year commercial use, front-to-rear, parts & labor
excluding belts, tyres, brake pads, battery and blades
2-Year Manufacturer’s Warranty
2-Year Manufacturer’s Warranty
2- Year commercial use, front-to-rear, parts & labor
excluding belts, tyres, brake pads, battery and blades
Make
Model
Horsepower
Cylinders
Cooling
PTO
Starting
Fuel Capacity (litres)
MOWER
Cutting width (cm/inch)
Mulching system
Cutting Height (cm)
Deck Construction
Mower Spindles
Deck lift system
SUSPENSION & DRIVE TRAIN
Drive Axles
Drive Tyres (inch)
Caster Tyres (inch)
GROUND SPEED
Speed-fwd. (km/h)
Speed-rev. (km/h)
DIMENSIONS
Overall length (cm)
Overall width (cm)
Overall width deflector down (cm)
Dry weight (Kgs)
OPERATOR CONTROL & COMFORT SYSTEMS
Certified Roll-Over Protection Structure
Instrumentation
Controls - Safety Group
Parking Brake / Safety Circuit
WARRANTY
Engine
Transmission
Balance of machine
SPECIFICATIONS
FW35KAV2148RDCE
CCWKAV1536RDCE
ENGINE
Kawasaki - Petrol
FX651V
20.5 HP
2 Cylinders V-Twin
Air cooled
Electric PTO clutch
Electric
19 Litres
Kawasaki - Petrol
FS541V
15 HP
2 Cylinders V-Twin
Air cooled
Electric PTO clutch
Electric
19 Litres
122 cm / 48”
Rear Discharge
Standard mulch insert
3.8 - 12.0 cm
3.6 mm fabricated construction, full width double top
deck, 6.35 mm scuff guards, 9.5 mm front bumper bar,
overlap welded corners
Cast aluminium 133 mm, 25,4 mm shaft
Central heigth adjustment with single hand wheel
91 cm / 36”
Rear Discharge
Optional mulching kit
4.4 - 12.0 cm
3.6 mm fabricated construction, double top bearing
housing, reinforcement, 3.6 mm scuff guards
Suspension
n.a.
n.a.
Transmission
Individual Hydro Gear ZT-3100 integrated transmissions
25,4 mm Tapered with 4-bolt flange
20 x 7.00 - 10 (4 ply)
11 x 4.00 - 5 (4 ply) flat free
Individual Hydro Gear ZT-3100 integrated transmissions
25,4 mm Tapered with 4-bolt flange
20 x 7.00 - 10 (4 ply)
11 x 4.00 - 5 (4 ply) flat free
0 - 11 km/h
0 - 3.2 km/h
0 - 9.6 km/h
0 - 3.2 km/h
200
125
n.a.
367
198
94
n.a.
255
n.a.
Speed indicator, hour meter
n.a.
n.a.
Operator presence, cruise Control Bar, independent
forward and reverse levers, Foot-activated neutral
Internal transaxle lock
Operator presence, cruise Control Bar, independent
forward and reverse levers, Foot-activated neutral
Internal transaxle lock
2-Year Manufacturer’s Warranty
2-Year Manufacturer’s Warranty
2- Year commercial use, front-to-rear, parts & labor
excluding belts, tyres, brake pads, battery and blades
2-Year Manufacturer’s Warranty
2-Year Manufacturer’s Warranty
2- Year commercial use, front-to-rear, parts & labor
excluding belts, tyres, brake pads, battery and blades
Make
Model
Horsepower
Cylinders
Cooling
PTO
Starting
Fuel Capacity (litres)
MOWER
Cutting width (cm/inch)
Mulching system
Cutting Height (cm)
Deck Construction
Mower Spindles
Deck lift system
Cast aluminium 133 mm, 25,4 mm shaft
Central heigth adjustment with double hand wheels
SUSPENSION & DRIVE TRAIN
Drive Axles
Drive Tyres (inch)
Caster Tyres (inch)
GROUND SPEED
Speed-fwd. (km/h)
Speed-rev. (km/h)
DIMENSIONS
Overall length (cm)
Overall width (cm)
Overall width deflector down (cm)
Dry weight (Kgs)
OPERATOR CONTROL & COMFORT SYSTEMS
Certified Roll-Over Protection Structure
Instrumentation
Controls - Safety Group
Parking Brake / Safety Circuit
WARRANTY
Engine
Transmission
Balance of machine
www.FerrisIndustries.eu | 35
CCWKAV1536SDCE
HCKAV1532RDCE
HCKAV1532SDCE
Kawasaki - Petrol
FS541V
15 HP
2 Cylinders V-Twin
Air cooled
Electric PTO clutch
Electric
19 Litres
Kawasaki - Petrol
FS541V
15 HP
2 Cylinders V-Twin
Air cooled
Electric PTO clutch
Electric
19 Litres
Kawasaki - Petrol
FS541V
15 HP
2 Cylinders V-Twin
Air cooled
Electric PTO clutch
Electric
19 Litres
91 cm / 36”
Side Discharge
Optional mulching kit
4.4 - 12.0 cm
3.6 mm fabricated construction, double top bearing
housing, reinforcement, 3.6 mm scuff guards
81 cm / 32”
Rear Discharge
n.a.
3.8 - 11.5 cm
3.6 mm fabricated construction, double top bearing
housing, reinforcement, 3.6 mm scuff guards
81 cm / 32”
Side Discharge
Optional mulching kit
3.8 - 11.5 cm
3.6 mm fabricated construction, double top bearing
housing, reinforcement, 3.6 mm scuff guards
Cast aluminium 133 mm, 25,4 mm shaft
Central heigth adjustment with double hand wheels
Cast aluminium 133 mm, 25,4 mm shaft
Central heigth adjustment with single hand wheel
Cast aluminium 133 mm, 25,4 mm shaft
Central heigth adjustment with single hand wheel
n.a.
n.a.
n.a.
Individual Hydro Gear ZT-3100 integrated transmissions
25,4 mm Tapered with 4-bolt flange
20 x 7.00 - 10 (4 ply)
11 x 4.00 - 5 (4 ply) flat free
Hydro Gear 0510 single hydrostatic transmission
19 mm Tapered with 4-bolt flange
16 x 6.5 - 8 (4 ply)
9 x 3.5 - 4 (4 ply)
Hydro Gear 0510 single hydrostatic transmission
19 mm Tapered with 4-bolt flange
16 x 6.5 - 8 (4 ply)
9 x 3.5 - 4 (4 ply)
0 - 9.6 km/h
0 - 3.2 km/h
0 - 8.8 km/h
0 - 3.2 km/h
0 - 8.8 km/h
0 - 3.2 km/h
198
106
129
255
192
83
n.a.
156
192
95
118
156
n.a.
n.a.
n.a.
n.a.
n.a.
n.a.
Operator presence, cruise Control Bar, independent
forward and reverse levers, Foot-activated neutral
Internal transaxle lock
Operator presence, integrated comfort controls I.C.C.
Operator presence, integrated comfort controls I.C.C.
Internal transaxle lock
Internal transaxle lock
2-Year Manufacturer’s Warranty
2-Year Manufacturer’s Warranty
2- Year commercial use, front-to-rear, parts & labor
excluding belts, tyres, brake pads, battery and blades
2-Year Manufacturer’s Warranty
2-Year Manufacturer’s Warranty
2- Year commercial use, front-to-rear, parts & labor
excluding belts, tyres, brake pads, battery and blades
2-Year Manufacturer’s Warranty
2-Year Manufacturer’s Warranty
2- Year commercial use, front-to-rear, parts & labor
excluding belts, tyres, brake pads, battery and blades
VISIT OUR WEBSITE:
www.Ferrisindustries.eu
DISTRIBUTED BY:
YOUR AUTHORISED FERRIS DEALER IS:
Caterpillar® is a registered trademark of Caterpillar Inc.
Hydro-Gear® is a trademark of Hydro-Gear Inc. and is used under license
Kawasaki® is a registered trademark of Kawasaki Motors Corporation
Marbain® is a registered trademark of The Fisher-Barton Group
YanmarTM is a trademark of Yanmar
ParkerTM is a registered trademark of Parker Hannifin Corp
Kawasaki: All power levels are stated gross horsepower per SAE J1995 / SAE J2723.
Briggs & Stratton: All power levels are stated gross horsepower per SAE J1940.
Caterpillar and Yanmar: All power levels are provided by manufacturer.
Not all products shown in this catalogue are available in your market.
Please contact your dealer for information on what is available in your country.
Briggs & Stratton is not responsible for typographical errors. All typographical errors are subject to correction.
2014 © Briggs & Stratton Corporation. We reserve the right to discontinue models or change specifications without notice.
All rights reserved.
BRIGGS&STRATTON
P.O. BOX 12 • 6040 AA ROERMOND • THE NETHERLANDS
TEL. +31 (0)475 40 83 83 • FAX. +31 (0)475 40 83 84
WWW.BRIGGSANDSTRATTON.NL
[email protected]
Rev. 01/2014EU-EN