Rexel is a premier, world-wide distributor of electrical products. Rockwell Automation is the
leading industrial automation manufacturer in North America. Rexel and Rockwell Automation
have partnered to provide our shared customers with exceptional products and elite
service. Together, we will support our customers and create value by providing sustainable and
innovative products and services for automation, technical supply and energy management.
1
Course
Course Title
CCA183
PowerFlex 750-Series Maintenance & Troubleshooting
Dates
12/11/2014 — 12/12/2014
Class Location
Rexel-Hagerstown, MD
Days
Tuition
2.0
$1,240
This skill-building course introduces concepts and techniques that will assist you in successfully maintaining and troubleshooting a
PowerFlex 750-Series (PowerFlex 753 or PowerFlex 755) drive. You will learn how to recognize PowerFlex 750-Series drive
hardware and properly wire the drive. You will also learn to diagnose specific faults.
Throughout the course, you will have the chance to use a variety of maintenance and troubleshooting tools, including:
• The A6 LCD HIM
• DriveExplorer™ software
• DriveExecutive™ software
After each demonstration, you will be given exercises that offer extensive hands-on practice using a PowerFlex 753 or PowerFlex 755
drive.
CCP800
Introduction to Automation
Dates
12/10/2014 — 12/12/2014
Rexel-Linthicum, MD
3.0
$1,350
After completing this course, you should have a broad and fundamental understanding of industrial automation. Topics range from
an overview of common automation industries to an introduction of basic automated system components, such as controllers, I/O,
drives, and HMI (Human Machine Interface). In addition, you will learn common automation terminology, what tools are used with
industrial automation, and what careers may be available to you within this field.
CCP146
Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals
Dates
1/13/15-1/14/15
Rexel-Linthicum, MD
2.0
$???
This course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix® and other
Logix5000™ systems (i.e., CompactLogix™, FlexLogix™, DriveLogix™, and SoftLogix™).
You will be introduced to basic Logix5000 concepts and terminology, and you will be exposed to Logix5000 system hardware,
including hands-on experience with the ControlLogix platform.
You will also have an opportunity to use RSLogix™ 5000 software to perform basic system configuration tasks.
CCP151
Studio5000 Logix Designer Level 2: Basic Ladder Logic Programming
Dates
1/15/15-1/16/15
Rexel-Linthicum, MD
2.0
$1,240
This course is a skill-building course that provides you with a basic understanding of RSLogix 5000 ladder logic instructions and terminology. This course also provides the resources and hands-on practice required to program basic ladder logic instructions for any
Logix5000 controller. You will have an opportunity to use RSLogix 5000 software to perform basic software tasks to meet the requirements of a given functional specification. In addition to using ladder logic, you will be introduced to ladder logic techniques,
established standards, and common rules for programming ladder logic.
**To register, contact Julie Scott at 410-636-2100 or [email protected]**
2
Course
Course Title
Class Location
Days
Tuition
CCP143
Studio5000 Logix Designer Level 3: Project Development
Rexel-Linthicum, MD
4.0
$2,070
Dates
1/27/15-1/30/15
Upon completion of this course, given a functional specification for an RSLogix 5000 application, you will be able to develop a project to meet the requirements of the specification.
This course covers tasks common the following controllers, which all use the Logix5000 control engine, or operating system:
 ControlLogix® controllers
 FlexLogix™ controllers
 CompactLogix™ controllers
 SoftLogix™ controllers
 DriveLogix™ controllers
his course builds upon your knowledge of common controller terms and operation and your experience with basic ladder logic
programming. This course presents a deeper understanding of project development tasks that are common to all Logix5000
controllers. Such tasks include organizing tasks and routines, organizing controller data, configuring modules, and sharing data.
CCP299
Studio 5000 Logix Designer Level 1: ControlLogix Fundamentals & Troubleshooting
Dates
2/16/15-2/20/15
Rexel-Linthicum, MD
4.5
$2,490
Upon completion of this course, you will be able to troubleshoot a previously operational ControlLogix system and restore normal
operation. You will have the opportunity to develop and practice these skills by :
 Learning basic concepts and terminology used with ControlLogix system hardware RSLogix 5000 software
 Practicing a systematic strategy for diagnosing and troubleshooting problems:
 Configuration issues
 Electrical noise
 Faulty/malfunctioning field devices
 Controller, I/O or other hardware issues
 Performing hands-on exercises
All Logix5000 systems use the same control engine; therefore, tasks are similar. You will see applicable references for other systems.
CCP299
Studio 5000 Logix Designer Level 1: ControlLogix Fundamentals & Troubleshooting
Dates
6/28/15-6/12/15
Rexel-Linthicum, MD
4.5
$2,490
Rexel-Hagerstown, MD
2.0
$1,240
See CCP299 Description Above.
CIA101
Introduction to the Integrated Architecture System
Dates
7/9/15-7/10/15
This course will assist you in developing and building a solid foundation of Integrated Architecture and automation system
knowledge. You will learn about and interact with a variety of automation hardware. You will also have an opportunity to use
Rockwell Automation software to perform basic system
configuration tasks. While performing these tasks, you will gain an understanding of how controllers, drives, motors, networks,
and HMI products function together within Integrated Architecture.
This introductory level course will give you a broad understanding of automation products and serve as an excellent first step
when beginning any automation training.
**To register, contact Julie Scott at 410-636-2100 or [email protected]**
3
Catalog Number
Course Title
Tuition
VC-LLB
Ladder Logic Basics & CompactLogix Starter Workstation
$1999
Duration
5, 90 Minute Sessions + Starter Workstation
This course will teach you how to write and test basic ladder logic code and how to employ common programming strategies and
best practices. You will also learn how to select and program bit, timer, counter, compare and moveinstructions. Examples and
labs will use RSLogix 5000 software and a CompactLogix L31 controller; however, the general ladder logic concepts covered in this
course are applicable to most common programmable controllers.
VC-SFT106
Arc Flash Awareness
Duration
4, 90 Minute Work Sessions
$375
This course will teach you to assess arc flash hazards and act to mitigate them by selecting appropriate PPE and determining protection boundaries. You will also learn how to use NFPA-70E 2012 and calculation methods to determine protection boundaries.
This course also provides some of the key requirements necessary to become a “qualified” person as defined in OSHA 1910.269,
332, 333, and NFPA 70E®, such as:
 Determining minimum approach distances
 Being capable of using special precautionary techniques, PPE, insulating and shielding materials, and insulated tools
 Receiving safety training to recognize and avoid hazards
VC-MFSISO-01
Machine Functional Safety & ISO 13849 System Design Risk Assessment
Duration
1, 120 Minute Session
$199
This course will teach you how to use a structured risk assessment process based on ISO 13849. You will learn how to identify
the hazards of a machine, estimate the level of risk, and choose risk reduction techniques. During this exercise, you will make
your decisions using the terms and rating system from ISO 13849. As you work through the process, you will build documentation
that you can use throughout the lifecycle of your machines.
VC-FTVIEW-01
FactoryTalk ViewPoint Implementation: FactoryTalk View ME Integration
$199
1, 90 Minute Session
Duration
This course will teach you how to monitor your FactoryTalk View ME projects in a web browser. This course will also show you
how to create a new FactoryTalk View ME web application and connect to an existing FactoryTalk View ME web application via
Ethernet from a PanelView Plus
VC-PF755H-01
PowerFlex 755 High Horsepower Drives: Pre-Installation
$199
Duration
This course will help you plan for the successful installation of PowerFlex 755 floor-mounted, high horsepower (300 HP
(200 kW) or larger) drives. You will explore common drive pre-installation topics including specific wiring, mounting,
fusing, and option card installation considerations for floor-mount PowerFlex 755 units.
**To register, contact Julie Scott at 410-636-2100 or [email protected]**
4
Catalog Number
VC-CCN300-01
Course Title
Tuition
Integrated Motion on Ethernet/IP: Configuration
$199
1, 120 Minute Session
Duration
This course will teach you how to choose topology and components, configure controllers and axes, and add drives to your
configuration.
VC-CCN300-02
Integrated Motion on Ethernet/IP: Commissioning
$199
1, 90 Minute Session
Duration
This course will teach you how to start up the network, test axes with motion direct commands, run hookup tests, and auto tune
axes.
VC-CCN300
Integrated Motion on Ethernet/IP Bundle
Duration
1, 120 Minute Session + 1, 90 Minute Session
$375
This is a course bundle featuring VC-CCN300-01 & VC-CCN300-02.
VC-MLDO-01
Machine-Level Design Optimization: Drive & Motor Selection
$199
Duration
In this first session, you will practice sizing and selecting drives and motors using Motion Analyzer software.
VC-MLDO-02
Machine-Level Design Optimization: Networks, Controller & I/O Selection
$199
Duration
In this second session, you will practice selecting machine components using Integrated Architecture Builder software.
VC-MLDO
Machine-Level Design Bundle
$375
Duration
This is a course bundle featuring VC-MLDO-01 and VC-MLDO-02.
VC-PF523P
PowerFlex® 523/525 Drives Programming with PowerFlex 525 Drive Kit
Duration
1, 120 Minute Session
$799
After completing this course, you should be able to program drive parameters for an example drive application. This course will
also teach you how to create a custom parameter group based upon drive applications. Throughout this course, the instructor will
cover a range of topics from establishing communications with a PowerFlex 523/525 drive via an EtherNet/IP™ network to testing
parameters of a PowerFlex 523/525 drive using the HIM.
**To register, contact Julie Scott at 410-636-2100 or [email protected]**
5
General Industrial
Automation Fundamentals
Industrial Electrical
Fundamentals of AC/DC Motors & Drives
Industrial Hydraulics
PLC Fundamentals
Industrial Mechanical
Industrial Pneumatics
Communications
Mobile Hydraulics
Ethernet/IP-Communications & Diagnostics
Mobile Electrical
Ethernet/IP-Hardware & IP Addressing
Electrical Theory
SLC 500 & RSLogix 500 Software
Industrial Safety
SLC 500-Hardware Fundamentals
Visualization
SLC500-Programming Fundamentals
FactoryTalk View ME Software-Applications & Displays
RSLogix 500 Software-Online Monitoring
FactoryTalk View ME Software-Drawing Objects
RSLogix 500 Software-Offline Programming
FactoryTalk View ME Software-Interactive Objects
RSLogix 500 Software-Documenting & Searching
ControlLogix & RSLogix 5000 Software
RSLogix 5000 Software-Project Configuration
RSLogix 5000 Software-Offline Programming
RSLogix 5000 Software-Online Monitoring
RSLogix 5000 Software-Motion
All Web-Based Sessions are $380
**To register, contact Julie Scott at 410-636-2100 or [email protected]**
6
Technology
Catalog Number
Description
Cost
General Industrial
9393RSTHYD
RSTrainer for Hydraulics
$622
ControlLogix
9393RSTCLX
RSTrainer for ControlLogix Fundamentals
$830
ControlLogix
9393RSTLX5KENE
RSTrainer for RSLogix 5000-Bundle w/All (4) LX5K Titles
$932
ControlLogix
9393RSTLX5KMOT
RSTrainer for RSLogix 5000-Motion
$380
ControlLogix
9393RSTLX5KOFF
RSTrainer for RSLogix 5000-Offline Monitoring
$380
ControlLogix
9393RSTLX5KON
RSTrainer for RSLogix 5000-Online Monitoring
$380
ControlLogix
9393RSTLX5KPRJ
RSTrainer for RSLogix 5000-Project Configuration
$380
ControlLogix
9393RSTLX5KOFF
RSTrainer for RSLogix 5000-Offline Programming
$380
ControlLogix
9393RSTLX5KENE
RSTrainer for RSLogix 5000-Bundle w/Online Monitoring,
Offline Programming and Project Configuration
$932
Networks
9393RSTLINX
RSTrainer for RSLinx
$622
Networks
9393-RSTENET2ENE
RSTrainer for Ethernet I/P-Communications & Diagnostics
$380
Networks
9393-RSTENET1ENE
RSTrainer for Ethernet I/P-HARDWARE & I/P ADDRESSING
$380
Networks
9393-RSTENETAENE
RSLogix5
RSTrainer for Ethernet Bundle
$622
9393RSTLX5
RSTrainer for RSLogix 5
$622
SLC 500
9393-RSTSLCALENE
RSTrainer for SLC500 Bundle
$622
SLC 500
9393RSTSLCHENE
RSTrainer for SLC 500-Hardware Fundamentals
$380
SLC 500
9393RSTSLCPENE
RSTrainer for SLC 500-Programming Fundamentals
$380
RSLogix 500
9393RST500ONENE
RSTrainer for RSLogix 500 Software-Online Monitoring
$380
RSLogix 500
9393RST500OFENE
RSTrainer for RSLogix 500 Software-Offline Monitoring
$380
RSLogix 500
9393RST500DSENE
RSTrainer for RSLogix 500 Software-Document & Search
$380
RSLogix 500
9393-RST500ALENE
RSLogix500 Software Bundle
$932
Visualization
9393RSTVMEALL
RSTrainer for RSView ME-All RSVME Titles
$932
Visualization
9393RSTVMEPT2
RSTrainer for RSView ME-Drawing Objects
$380
Visualization
9393RSTVMEPT3
RSTrainer for RSView ME-Interactive Objects
$380
PLC5
9393-RSTLX5
RSTrainer for RSLogix5 Software
$622
Miscellaneous
9393RSTSMGRENF
RSTrainer Enterprise Edition Student Manager
$725
9393-MODPROG
RSTrainer for Modular Programming for Machine Applications
$380
Miscellaneous
**To register, contact Julie Scott at 410-636-2100 or [email protected]**
7
RSTechED
Automation Fair 2014
Location: San Diego, CA
Dates: May 31-June 5,2015
Location: Chicago, IL
Dates: November 18-19,2015
RSTechED is a training event for end-users, systems integrators,
partners and OEMs. With the latest Rockwell Automation products and technology solutions on display, participants will gain
an in-depth understanding of how the Integrated Architecture
is information-enabling global companies
Attend Automation Fair® great opportunity to explore smart,
safe, sustainable manufacturing solutions geared toward
improving your business profitability.

DISCOVER how to improve productivity and efficiency
throughout the life cycle of your automation investments.
*For more information, contact your Rexel Account Manager
or call 410-636-2100

LEARN how flexible, scalable automation solutions can
lower costs and improve overall performance.

EXPERIENCE how sustainable production practices can
increase your competitiveness and help you better manage
energy and materials costs.
Rockwell Automation on the Move (RAOTM)
Location: 25 S. Queen St. Lancaster, PA
Dates: March 4-5, 2015
Discover Smart, Safe, Sustainable Solutions
Enable Plant-wide Optimization — Helping you get more
productivity and efficiency from your automation investments throughout all stages of your plant’s lifecycle.
Boost Machine Builder Performance — Flexible, scalable
automation solutions designed to lower Total Cost to
Design, Develop and DeliverSM machines and improve
overall performance.
Drive Sustainable Production — Increase competitiveness
and overcome the rising costs of energy, raw materials
and lost worker productivity.
Participate in technical sessions, hands-on labs and interact
with products and technology exhibits.
*For more information, contact your Rexel Account Manager
or call 410-636-2100
Attend industry forums, user group meetings, hands-on labs,
technical sessions and demonstrations to expand knowledge
and use of the latest control, power and information
technologies.
*For more information, contact your Rexel Account Manager
or call 410-636-2100
)
Process Solutions User Group
Location: Chicago, IL
Dates: November 16-17, 2015
The Rockwell Automation Process Solutions User Group (PSUG)
provides a unique opportunity to discover ways to achieve
process automation excellence. Gain a competitive advantage
by interacting with peers and industry experts who are improving their processes, creating new revenue streams and establishing best practices.
Participate in topics that impact you on a daily basis, such as
security, standards, and sustainability trends. Voice your
opinion and drive the development priorities and technology
roadmap for the PlantPAx process automation system.
*For more information, contact your Rexel Account Manager
or call 410-636-2100
8
www.rexelusa.com