event brochure - Absolute Completion Technologies

Instructors
April 2nd, 2015
8:30 am - 4:30 pm
Thane G. Russell, P.Eng.
VP Business Development and Technology
Absolute Completion Technologies Ltd., International
A graduate of Dartmouth College, Mr. Russell has more
than 25 years of Canadian industry experience working
in production operations, drilling and completions
and production optimization roles. His career started
in drilling with Texaco in the mid 1980s. That team set
records for the deepest and longest horizontal wells
of the time. Thane went on to work with other large
companies including Canadian Hunter focusing on
completions, trouble shooting and optimizing oil and
gas wells using downhole tools produced by many
vendors. Since 2002, Thane has consulted to production
and services companies world-wide on well completion
strategies for flow control and sand control. He has
presented technical papers at various SPE and Heavy
Oil Conferences.
Location
Metropolitan Conference Centre
Royal Meeting Room
2nd Floor, 333 4th Avenue SW
Calgary, Alberta
INFLOW AND
INJECTION CONTROL:
1 DAY WORKSHOP
Fundamentals of Flow Control
for Horizontal and Thermal
Well Applications
Workshop overview
This hands-on program with case studies and examples
will give you a comprehensive understanding of
downhole flow control applications. Gain the tools and
knowledge to model your reservoir for potential flow
control applications.
Learn about the full range of inflow control as well as
injection control strategies and the current technologies
available for conventional horizontal oil and gas wells as
well as for SAGD applications.
Who should attend
Senior to Junior Engineers and Technologists involved
in planning and programming of well completions,
well services and production optimization. Attendance
limited to 20.
Learning approach
A combination of theory, research studies, tools and
techniques plus in-course exercises will aid learning.
BUILD BETTER WELLS
Glenn E. Woiceshyn, P.Eng.
VP Engineering
Absolute Completion Technologies Ltd., Canada
After completing a Master of Applied Science degree
in Mechanical Engineering, Mr. Woiceshyn joined Petro
Canada Research to develop multiphase flow meters
for steam and oil/water/gas, and research production
problems related to waxy crudes, completion fluids
design and hydraulic fracturing. With more than 20
years of petroleum engineering experience, Glenn
has consulted on sand control, production chemistry,
completion fluids design, formation damage and
metering issues for numerous companies world-wide –
primarily as a consultant with Adams Pearson Associates.
He joined Absolute in 2007 and specializes in equipment
and completion designs for sand control and flow control
applications. Glenn has designed many FDC (flow control
device) wells worldwide for production and injection
applications and has authored many technical papers.
Register today to reserve your place
Register at: www.ABSOLUTECT.com/workshops
Date
8:30 am
Reservoir Flow Control Applications
• Reservoir conditions that drive the need for down
hole flow control
• Use of flow control technology world wide
• Design and operation principles of flow control tools
• Inflow applications for flow control – enhancing
well production
• Injection applications for flow control – steam, water
INFLOW AND
INJECTION CONTROL:
1 DAY WORKSHOP
Fundamentals of Flow Control
for Horizontal and Thermal
Well Applications
Flow Control Deployment and Operation
• Modelling horizontal well zones for flow control
applications
• Selection criteria and performance considerations
• Important considerations in deploying flow
control systems
• Integration of flow control systems with sand control
and other down hole hardware systems
Lunch: Hot buffet included
1:00 pm
Case Studies Modelling Wells and Solutions
• Introduction to Reservoir Modelling Software
• Input data for reservoir modeling
• Modelling injection zone control applications: steam,
water, thief zones
• Modelling inflow zone control: optimizing
production
Participant feedback
what they valued from the last course:
• Very good general overview and
explanation of flow control
• Cases; physical working of different device
types; pros/cons in various applications
• Overall general knowledge discussed with
case studies for understanding SAGD
• Easy to follow; great notes matched the
PPT which was helpful
Heavy Oil • Thermal Stimulation • SAGD • CCS • Horizontal Wells
New Developments Inflow and Injection Control
• Diagnosing reservoir changes and sources of
potential system failures
• Planning wells for long-term reserve life, production,
and economics
Investment
www.ABSOLUTECT.com
Register at: www.ABSOLUTECT.com/workshops
Workshop agenda
$850 plus GST/person
Continental breakfast and
lunch included
$650 plus GST/person
Early registration discount deadline
4:30 pm March 13th, 2015
Attendance limited to 20
All attendees must pre-register prior to
4:30 pm March 27th, 2015
Register today to reserve
www.absolutect.com/workshop
or phone 403.266.5027
Inflow and Injection Control: 1 Day Workshop