1. law, govt and politics
2. law enforcement
3. fire department

Course Name
Pg #
3
A.C. Motor Control – Level I
Automation – Sensors and Logic Devices
4
Certification Part II – Construction Program 10
6
Communication Cabling – Part I
Computer Operations – Level I
6
Computer Operations – Level II
7
9
Computerized Electrical Estimating – Part I
Conduit Fabrication – Level I
8
Conduit Fabrication – Level II
8
Conduit Fabrication – Level III
8
Electric Vehicle Infrastructure Training
7
Electrical Code Review
8
Electrical Estimating – Introduction - A
9
Electrical Estimating – Introduction - B
9
Electronics – Level I
3
Fibre Optics – Level I
6
Fire Alarm – Level I – A
4
Fire Alarm – Level I – B
4
Fire Alarm – Level I – C
4
Fire Alarm – Level II – A
5
Fire Alarm – Level II – B
5
Fire Alarm – Level III – A
5
Fire Alarm – Level III – B
5
Fire Alarm – Level IV – A
5
Fire Alarm – Level IV – B
5
Fire Alarm Certificate Renewal – A
5
Fire Alarm Certificate Renewal – B
5
Fire Alarm Certificate Renewal – C
5
Fire Alarm Certificate Renewal – D
5
First Aid and CPR – A
10
First Aid and CPR – B
10
HVAC – Level II
3
Instrumentation – The Fundamentals
4
Introduction to ControlLogix Automation
3
Introduction to Microsoft Office
7
Inventing with Programmable Microchips
4
Mobile Computing
7
Network Cabling Specialist – Pre-exam
6
Pre-Exam for Masters License
8
Shop Steward Training
10
Solar Energy – Level I - A
10
Solar Energy – Level I - B
10
Solar Energy – Level II
10
Trade Applications
8
Welding – Level I
9
Welding – The Fundamentals
9
Course Start Dates
Monday
Tuesday
Wednesday
Feb 11
Thursday
Saturday
Feb 19
Feb 25
Jan 26
Feb 10
Jan 20
Feb 2
Feb 10
Mar 2
Feb 11
Feb 24
Feb 4
Feb 5
Feb 23
Feb 17
Feb 23
Feb 2
Feb 11
Feb 23
Jan 26
Feb 4
Jan 28
Feb 3
Jan 27
Feb 3
Jan 13
Jan 19
Feb 23
Mar 17
Feb 21
April 18
Mar 2
Feb 17
Feb 4
Jan 22
Feb 18
Jan 29
Jan 28
Jan 14
Jan 26
Feb 19
Feb 25
Feb 3
Feb 28
Mar 23
Jan 26
PAGE 2
SPRING 2015 COURSES
Introduction to ControlLogix
PLC Automation
CONTROLS
Prerequisite – Fourth term Apprentice or Journeyperson
Electrician.
A.C. Motor Control – Level I
Prerequisite – Fourth term Apprentice or Journeyperson
Electrician.
This course is designed to introduce the students to the development of A.C.
Motor Controls and give them an understanding of their function and uses.
The course content includes an in-depth study of reading basic control
circuits and sequences of operation, and designing a schematic control
circuit including proper layout and wiring methods.
Hands-on wiring projects include start/stop/jog, hand/off/auto, interlocking
and forward/reverse applications. The students will have the opportunity –
with the aid of a computer – to draw control circuits used in conjunction
with their assignments. These computerized circuits can then be put in a run
mode and tested prior to wiring.
The course objectives are to strengthen the students logical thinking in
reading and deciphering the information in control circuits.
This course is designed to introduce students to programmable logic
controllers. The course begins with a review of motor control principles,
followed by an overview and history of control technology. The PLC used in
this course is the Rockwell ControlLogix PLC, which remains the standard
for automotive and other processing industries.
Topics for discussion and lab exercises consist of: input, output and
controller modules and their functions; memory and project organization;
tasks, programs and tags; ladder logic programming; PC to PLC serial and
Ethernet communication protocol and/or gates; serial, parallel and start-stop
programming; latch and unlatch functions; time delay function; and flashing
and traffic light programming.
Each student will be assigned to an individual ControlLogix Simulation
Station with a dedicated computer to program the above functions as part
of the lab exercises.
Course No: ..........ACMC 1/15
Start Date: ...........Wednesday February 11, 2015
Time: ..................6:30pm - 9:30pm
Sessions: .............11
Location: .............Toronto Training Centre
Course No: ..........IPLC 1/15
Start Date: ...........Wednesday February 4, 2015
Time:....................6:30pm – 9:30pm
Sessions: .............11
Location: .............Toronto Training Centre
*Electronics – Level I
Can you read a discrete component electronic schematic? Could you design
a feedback regulated linear power supply? If not, then come out and take
part in this exciting new course. This hands-on, experiment-oriented course
begins with the basics and progresses to advanced topics with minimal math
emphasis. This course is geared to enable individuals to continue building
enhanced electronic circuits and develop their design know-how while
working at a casual pace.
Students will learn about active filters, multistage power amplifiers, voltage
controlled oscillators, Schmitt triggers, thyristors and more by constructing
discrete device and op-amp circuits from scratch. Throughout the creation
of these projects, students will develop troubleshooting skills by working
with test and measurement equipment such as bench lab power supplies,
function generators, analog and digital oscilloscopes.
In addition to prototyping working circuits on breadboards, students will
develop hardware assembly expertise by soldering, testing and
troubleshooting a simple functional digital test instrument.
Automatic Temperature Controls
HVAC – Level II
The objective of this course is to provide students with hands-on experience
wiring building automation systems. This course will cover reading and
interpreting shop drawings and applying that knowledge to wiring a
simulated air handling system in the shop.
In the shop, students will wire temperature, humidity and pressure sensors,
as well as heating, chilled water control valves and dampers. The class will
wire variable frequency drives that will be controlled via BACnet
communication protocol.
When the projects are wired, the class will be involved with troubleshooting
the wiring through a web-based browser. The projects will then be
commissioned by the students verifying that the wiring, programming and
graphics meet the requirements of the provided shop drawings.
Course No: ..........ELEC 1/15
Start Date: ...........Tuesday February 17, 2015
Time: ..................6:30pm - 9:30pm
Sessions: .............12
Location: .............Toronto Training Centre
**Please note there is a maximum of eight (8)
participants in this program**
Course No: ..........HVAC2 1/15
Start Date: ...........Monday March 2, 2015
Time: ..................6:30pm - 9:30pm
Sessions: .............5
Location: .............Mississauga Training Centre
REGISTRATION OPENS ON MONDAY JANUARY 5th AT 7:30am
IN PERSON or ONLINE at http://lu353.com/Spring2015.html
If you are interested in taking more than two courses for the Spring 2015 session, please call the
information line at (416) 510-5284 or the Education Office after January 12th for available courses.
PAGE 3
Automation – Sensors and Logic
Devices
FIRE ALARM
Knowledge of sensors and PLC’s is essential for designing and maintaining
process lines and production equipment on the plant floor. Sensors act as
the eyes, ears and touch for programmable logic controllers. This course
explores all five (5) common sensing technologies such as photoelectric,
inductive, capacitive, and ultrasonic and limit switch. Additionally, students
will learn to use a software interface to program Siemens LOGO!
programmable logic controllers.
This course is comprised of a series of lectures and hands-on labs as well
as a final ‘real-world’ PLC programming challenge. After completing this
course the student will be able to identify all types of sensors commonly
used as well as design and troubleshoot them. The student will be
comfortable writing PLC code in both function block and ladder styles.
Course No: ..........SIC 1/15
Start Date: ...........Thursday February 19, 2015
Time: ..................6:30pm - 9:30pm
Sessions: .............10
Location: .............Toronto Training Centre
Members successfully completing the Fire Alarm
& Protection Systems four-level program will
receive a certification card. This card is
recognized by the Fire Marshall’s office for
performing annual tests, inspections, repairs and
alterations to existing Fire Alarm Systems as
outlined in the Ontario Fire Code Reg. 213/07.
Fire Alarm & Protection Systems –
Level I
Installation of Fire Alarm Control Panels
and Input & Output Devices
Instrumentation – The Fundamentals
The objective of this course is to allow students to familiarize themselves
with the basic fundamentals of industrial instrumentation. It has been
designed for persons with an electrical background that seeks to understand
the concepts of process control, through the study of pressure, level,
temperature, and flow measurement.
The course will guide and explain installation, wiring, process connections,
calibration and tuning. Components such as primary elements, transmitters,
controllers, and final control elements that make up the control loop will be
studied in depth using state of the art devices mounted on our process
control training system. The trainer processes are controlled by a computerbased PID controller and process control and simulation software.
Prerequisite – Fourth term Apprentice or Journeyperson
Electrician.
This course is designed to develop your fire alarm knowledge and practice
with basic fire alarm components and their function in conventional
electro/mechanical systems. You will design complete systems with layout,
schematic and riser diagrams from basic systems for a commercial complex
– complete with related hydro, ULC and building codes that are based on
CAN/ULC-S524 “Standard for Installation of Fire Alarm Systems.” This
program is an introduction to the fire alarm industry, classes of wiring, codes,
and installation of conventional fire alarm panels and devices.
Course No: ..........INS 1/15
Start Date: ...........Tuesday February 17, 2015
Time:....................6:30 – 9:30pm
Sessions: .............12
Location: .............Mississauga Training Centre
Course A:............FAI 1/15
Start Date: ...........Monday February 2, 2015
Time: ..................6:30pm - 9:30pm
Sessions: .............12
Location: .............Toronto Training Centre
Inventing with
Programmable Microchips
Have you noticed how many devices are programmable
in our modern society? Have you ever wondered what acts as the brains of
these devices? If you are curious about microchips and want to learn how
to program them then this is the course for you.
A microchip is a circuit board mounted device without the infrastructure to
switch large loads or handle signals over 5Vdc. What that means is you get
to design your own control architecture from scratch and learn some
fundamental lessons in the process. The delivery of this course is 100%
hands on - you build, program and debug your own circuits. As well as
following a textbook, you will learn where all of the great on-line resources
are to assist you with developing projects.
Some of the devices we will learn to interface are stepper motors, servos,
LEDs, photo resistors and other analog devices. This course is intended to
be an eye opener to those without any programming or electronics
knowledge, and fun and challenging to individuals who already know a few
programming languages.
Course No: ..........IPM 1/15
Start Date: ...........Wednesday February 18, 2015
Time: ..................6:30pm - 9:30pm
Sessions: .............10
Location: .............Oshawa Training Centre
PAGE 4
Course B: ...........FAI 2/15
Start Date: ...........Wednesday February 11, 2015
Time: ..................6:30pm - 9:30pm
Sessions: .............12
Location: .............Toronto Training Centre
Course C: ...........FAI 3/15
Start Date: ...........Monday February 23, 2015
Time: ..................6:30pm - 9:30pm
Sessions: .............12
Location: .............Mississauga Training Centre
REGISTER ONLINE -COURSES FILL
QUICKLY!
Fire Alarm & Protection Systems –
Level II
Fire Alarm & Protection Systems –
Level IV
Integrated Fire Alarm Controls EVAC Systems & Fire
Alarm Extinguishing Control Panels
Advanced Fire Alarm Control Panels:
Addressable Digital Analog Devices
Prerequisite – Fire Alarm - Level I and Journeyperson
Electrician.
Prerequisite – Fire Alarm - Level III and Journeyperson
Electrician.
This course is designed to give students a complete and accurate look at the
installation of a modern fire alarm system. Upon completion of this course
the journeyperson electrician should be capable of installing a complete fire
alarm system and all aspects related to such systems. The course
references the CAN/ULC-S537 “Standard for the Verification of Fire Alarm
Systems.” Level II continues from the first course with the installation of
EVAC panels, extinguishing systems, and fire pumps.
This course takes the student into the world of the microprocessor-based fire
alarm systems. Along with this advanced technology comes the need to
change the way we think of a fire alarm as well as the way we wire, install
and maintain these life safety systems. Even the classifications of field
wiring have had to change.
Topics covered include:
• Binary and hexadecimal counting
• Programming of smart detection devices
• How data is transmitted
• Use of fibre optics in computerized fire alarm systems
• How to install and set up these systems
Combining all this with the hands-on learning and shop work on these new
systems, the student should be able to compliantly install these state-ofthe-art pieces of equipment. The course references CAN/ULC-S527
“Standards for Control Units for Fire Alarm Systems”.
Course A:............FAII 1/15
Start Date: ...........Monday January 26, 2015
Time: ..................6:30pm - 9:30pm
Sessions: .............14
Location: .............Oshawa Training Centre
Course B: ...........FAII 2/15
Start Date: ...........Wednesday February 4, 2015
Time: ..................6:30pm - 9:30pm
Sessions: .............14
Location: .............Mississauga Training Centre
Course A:............FAIV 1/15
Start Date: ...........Tuesday January 27, 2015
Time: ..................6:30pm - 9:30pm
Sessions: .............14
Location: .............Mississauga Training Centre
Course B: ...........FAIV 2/15
Start Date: ...........Tuesday February 3, 2015
Time: ..................6:30pm - 9:30pm
Sessions: .............14
Location: .............Oshawa Training Centre
Fire Alarm & Protection Systems –
Level III
Troubleshooting Complete Fire Alarm Systems
Prerequisite – Fire Alarm - Level II and Journeyperson
Electrician.
Fire Alarm Certificate Renewal
Previous fire alarm courses have dealt with external wiring methods. Fire
Alarm Level III will take the Journeyperson step-by-step into the internal
workings of the fire alarm panels. This course is concerned primarily with
troubleshooting techniques applied in a logical sequence and the student will
be taught to identify and diagnose faults occurring on a variety of systems.
Upon completion, the student will have had the opportunity to develop proven
troubleshooting and repair methods of fire alarm systems. The course
references CAN/ULC-S536 “Standards for the Inspection and Testing of Fire
Alarm Systems.” This level deals with the operation of the fire alarm panel
and focuses on system troubleshooting.
Prerequisite – Successful completion of Fire Alarm Levels 1 –
4 between 2008 and 2010 and Journeyperson Electrician.
Under the agreement with the Ontario Fire Marshall’s Office, Fire Alarm
Certificates must be renewed every five years. This program reviews the
requirements of the ULC standards, the Ontario Building Codes, OHESC and
the Ontario Fire Code – with emphasis on changes to the codes and
installation methods and technology. Students will receive updated code
information and upon successful completion have their certification
renewed for five years.
Course A:............FAIII 1/15
Start Date: ...........Wednesday January 28, 2015
Time: ..................6:30pm - 9:30pm
Sessions: .............13
Location: .............Mississauga Training Centre
Course A:............FA REN 1/15
Start Date: ...........Tuesday January 13, 2015
Time: ..................6:30pm - 9:30pm
Sessions: .............9
Location: .............Toronto Training Centre
Course B: ...........FA REN 2/15
Start Date: ...........Monday January 19, 2015
Time: ..................6:30pm - 9:30pm
Sessions: .............9
Location: .............Mississauga Training Centre
Course B: ...........FAIII 2/15
Start Date: ...........Tuesday February 3, 2015
Time: ..................6:30pm - 9:30pm
Sessions: .............13
Location: .............Toronto Training Centre
Course C: ...........FA REN 3/15
Start Date: ...........Monday February 23, 2015
Time: ..................6:30pm - 9:30pm
Sessions: .............9
Location: .............Barrie Training Centre
REMINDER
Just a reminder for unemployed members, we offer WHMIS
and FALL PROTECTION every Tuesday at the Toronto
Training Centre, and every Thursday at the Mississauga
Training Centre, starting at 8:30am.
Course D: ...........FA REN 4/15
Start Date: ...........Tuesday March 17, 2015
Time: ..................6:30pm - 9:30pm
Sessions: .............9
Location: .............Toronto Training Centre
PAGE 5
*Fibre Optics - Level I
TELECOMMUNICATIONS
Communication Cabling – Part I
Basic Level Voice & Data
Communication Cabling Systems
Prerequisite – Fourth term Apprentice or Journeyperson
Electrician and members working under the communication
section of the collective agreement. Good colour distinction
skill is crucial.
This course is the first step of three in becoming certified as an IBEW
Communication Electrician (when promoted by an employer). Students
successfully completing this course will have a good grasp of fundamental
voice and data cable installation procedures and can advance to the Level
II course.
This course has a significant hands-on component where students construct
an industry standard structured cabling system and also have the
opportunity to test every aspect of their installation. Learn all the critical
details of installing category 5e cable and the correct termination procedures
of high performance connectors. Each student will be assembling their own
structured cabling system consisting of Belden, CommScope (Systimax)
products and other vendors’ products popular in the marketplace. The
student will gain an understanding of all aspects of cable testing procedures
by using state-of-the-art testing equipment.
Questions addressed in this course:
• Are T568A terminations better than T568B?
• What is a binder group?
• What is the difference between split pairs and crossed pairs?
• What is the maximum pull tension of a 4-pair cable?
In this updated program, students will learn about the world of Fibre Optics
including:
• The basics of light transmission
• Safe handling procedures
• How to install connectors
• Basics of testing fibre cables
Students will also be preparing and terminating a variety of fibre connectors
from top tier manufacturers. Connector styles include ST, SC and LC used
in current installations.
LASER Optimized fibre and its unique performance properties is also covered
in this program. Also discussed is the important how’s and why’s of
preparing a light budget.
When completed, the students will be able to actually apply their newly
learned skills on the job.
Course No: ..........FOI 1/15
Start Date: ...........Monday February 23, 2015
Time: ..................6:30pm - 9:30pm
Sessions: .............12
Location: .............Mississauga Training Centre
COMPUTER STUDIES
*Computer Operations – Level I
Students will learn the fundamentals of computer use through classroom
lectures and practical exercises using computers. Specific subject matter
will include:
• Understanding startup and login
• Keyboard, mouse, monitor, printers and their ports
• The graphic user interface including icons, shortcuts and the desktop
• Introduction to the file system, including drivers and devices
• Using network applications including Email and Web browsers
• How to keep your computer safe and running smoothly
This course is recommended for members that may not be as proficient with
computers as they would like to be. It is also a great place to start for those
who are interested in other computer courses that are offered such as
AutoCAD, Practical Computer Use and Computerized Electrical Estimating.
Course No: ..........CCI 1/15
Start Date: ...........Monday January 26, 2015
Time: ..................6:30pm - 9:30pm
Sessions: .............12
Location: .............Toronto Training Centre
Network Cabling Specialist (NCS) –
Pre-exam
Recommended prerequisite – Successful completion of
Communications Cabling course or equivalent.
This course covers the ANSI/TIA/EIA-568-B, as well as the 569, 606 and 607
standards in preparation for writing the Network Cabling Specialist
Certificate of Qualification. Portions of the Ontario Building Code and the
Canadian Electrical Code pertaining to telecommunication installations are
also reviewed. This course is highly recommended for any person wishing
to challenge the C of Q exam.
The Ontario College of Trades specifies a minimum of 4,000 hours of
experience in telecommunication cabling installations to write the NCS C of
Q exam. To be successful, expect to allocate at least two hours weekly to
review course material.
For the first class, the current Electrical Safety Code book (Ontario or
Canadian 2012 edition) and a basic calculator are required. Codebooks are
mandatory for this program and the Ontario 2012 edition is available for
purchase for $190.00.
Course No: ..........COMPOP1 1/15
Start Date: ...........Tuesday February 10, 2015
Time: ..................6:30pm – 9:30pm
Sessions: .............10
Location: .............Mississauga Training Centre
New from Orderline
THE ILLUSTRATED CODE
SERIES ELECTRICAL
IBEW Members
Save Over $50.00!
*Visit us at www.orderline.com/offer/ibew
and enter ibew0350 to take advantage of this
exclusive members’ offer!
Course No: ..........NCS 1/15
Start Date: ...........Wednesday January 28, 2015
Time: ..................6:30pm - 9:30pm
Sessions: .............12
Location: .............Toronto Training Centre
PAGE 6
Computer Operations –
Level II
*Introduction to
Microsoft Office
Prerequisite – Computer Operations –
Level 1 or equivalent experience.
Prerequisite – Computer Operations - Level 1
or equivalent experience.
So, you know how to use a computer, and you can manage the basics of
Word, Excel, surfing the web and email. But what do you do if something
goes wrong? Better yet how can you avoid problems to begin with? Do you
know what to look for in a new computer or how to manage software or
upgrade the hardware? Do you know how to keep your files, pictures and
data safe?
The second level of computer operations focuses on the maintenance and
upgrading of PCs with the Windows operating system and hardware. The
course is primarily based on Windows 7 but Windows 8.1 and Windows 10
Technical Preview are also presented. Students will also have hands on labs
covering topics that include:
• Program installation and removal
• Hard drive formatting, compression and encryption
• Printer driver install and configuration
• Multiple Monitor setup
• PC assembly
This hands-on course will introduce you step-by-step to the new and
enhanced features available in Microsoft Office Word and Excel. The
techniques covered in this course are designed to enhance your productivity
and help you create well-organized and professional looking documents,
and give you an introduction to creating and using Excel formulas.
In Microsoft Word, you will learn how to eliminate repetitive typing using the
many advanced editing techniques, eliminate repetitive formatting using the
power of the Styles command, efficiently create tables, compare documents,
create footnotes and cross references in your document, apply borders and
shading to add interest to your text, paragraphs and pages and more.
In Microsoft Excel you will be taken from basic concepts to extend your
knowledge into some of the more specialized and advanced capabilities of
Excel by automating some common tasks, applying advanced analysis
techniques to more complex data sets, and sharing Excel data with other
applications. You will learn how to create professional looking worksheets
that include text, numbers and calculations; explore the new Excel task
panes, and efficiently move through the worksheet. We will also learn how
to create time-saving Excel formulas using addition, subtraction,
multiplication and division.
Course No: ..........COMPOP2 1/15
Start Date: ...........Tuesday January 20, 2015
Time: ..................6:30pm – 9:30pm
Sessions: .............14
Location: .............Toronto Training Centre
Course No: ..........MO 1/15
Start Date: ...........Thursday January 22, 2015
Time: ..................6:30pm - 9:30pm
Sessions: .............12
Location: .............Toronto Training Centre
*Mobile Computing
Mobile computing is rapidly replacing desktops for many day-to-day
functions. On the job-site, mobile computing is playing an increasingly
important role, from taking pictures and sending e-mails to emerging cloudbased applications for construction prints. Take this opportunity to explore
what the buzz is about.
Experience all the popular operating systems on both smartphones and
tablets, in a hands-on, comfortable and accessible class – iPhone, Android,
Blackberry, Windows Surface, Apps, QR Codes and more. This interactive
course is designed for members to be able to understand the fundamentals
of mobile computing.
Those who are new to the world of mobile computing will understand what
they need to know in plain English. Participants with more experience will
learn to get even more out of these powerful devices and get a chance to test
drive several popular platforms – for example, a blackberry user will get
hands-on learning with an iPhones on both smartphone and tablet devices.
Topics covered include how to:
• Take and send pictures
• Manage e-mail
• Browse the web
• Communicate with friends and family
• Discover and install the best apps
• Learn helpful apps for the job-site and beyond
• Understand device security, back-up and loss solutions
Upon successful completion of this course, students will be able to operate
each of the four major mobile device platforms, and have hands-on
experience of sample trade-related apps.
LICENSING & CLASSIFICATION
Electric Vehicle Infrastructure
Training Program
Prerequisite – Journeyperson Electrician and a copy of your
309A or OCOT membership card.
The Electrical Vehicle Infrastructure Training Program (EVITP) – Phase 1 is the
first level of training for the installation and maintenance of plug-in hybrid
electric vehicle (PHEV) and electric vehicle (EV) infrastructure.
This course will cover the detailed concepts required for the proper
installation and maintenance of the infrastructure including:
• Automobile manufacturer’s charging performance integrity specifications
• EV battery types, specifications, and charging characteristics
• Utility interconnect, notice, policies and requirements
• Charging station fundamentals including brand/model-specific
installation for both Level 1 & Level 2 charging stations
• Service level assessments and upgrade implementation
• Canadian Electrical Code (CEC) standards and requirements, and
• First responder safety and fire hazard measures
At the end of the course there is an industry exam available. The student will
be required to pay a $35.00 fee in order to sit the exam. Upon successful
completion of the course and passing the exam, students will receive a
certificate from EVITP.
Students should bring a copy of the Canadian or Ontario Electrical Code to class.
Course No: ..........MCOM 1/15
Start Date: ...........Thursday January 29, 2015
Time: ..................6:30pm – 9:30pm
Sessions: .............10
Location: .............Toronto Training Centre
Course No: ..........EVITP 1/15
Start Date: ..........Tuesday February 24, 2015
Time:....................6:30pm – 9:30pm
Sessions: .............10
Location: .............Toronto Training Centre
PAGE 7
Pre-Exam for Masters License
CONDUIT BENDING & FABRICATION
Prerequisite – Must have your 309A for a minimum of three
(3) years experience as an Ontario Journeyperson Electrician.
This review course will cover the latest Ontario Electrical Safety Code (2012
Edition). Related topics include: Occupational Health & Safety Act (O.H.S.A.),
Lien Act, Workers Health & Safety Act and Local Union By-laws as they apply
to the Master Electrician.
**NOTE: A COPY OF YOUR CURRENT 309A LICENSE OR OCOT
CARD MUST BE INCLUDED WITH YOUR REGISTRATION OR IT
WILL NOT BE PROCESSED. YOU MUST HAVE YOUR 309A FOR
A MINIMUM OF THREE (3) YEARS.
Prerequisite – Second term Apprentice or Journeyperson
Electrician.
This introductory course was designed to provide members with an overview
of EMT conduit bending procedures. It is intended for members who have
minimal or no conduit bending skills. The focus of this course is to provide
members with a hands-on opportunity to practice conduit bending using
hand benders.
Course No: ..........PEM 1/15
Start Date: ...........Wednesday January 14, 2015
Time: ..................Saturdays - 9:00am – 4:00pm
Weekdays - 6:30pm – 9:30pm
Sessions: .............16
Location: .............Mississauga Training Centre
Session Date
Conduit Fabrication Level I
NOTE: Safety shoes or work boots
must be worn during class.
Course No: ..........CF1 1/15
Start Date: ...........Tuesday February 10, 2015
Time: ..................6:30pm – 9:30pm
Sessions: .............10
Location: .............Mississauga Training Centre
Session Date
1. Wednesday January 14
9. Saturday February 28
2. Wednesday January 21
10. Monday March 2
3. Wednesday January 28
11. Saturday March 7
Conduit Fabrication – Level II
4. Saturday January 31
12. Monday March 9
5. Monday February 2
13. Saturday March 14
Prerequisite – Conduit Fabrication Level I or equivalent trade
experience.
6. Saturday February 7
14. Monday March 23
7. Monday February 9
15. Saturday March 28
8. Monday February 23
16. Saturday April 11
*Electrical Code Review
Electrical Code Review is designed for the participant to learn the
professional method of how to use the code. This course is geared toward
practical everyday use in the field using the 2012 Canadian and Ontario
Electrical Safety Codes.
Using the hands-on approach of in-depth analysis of questions and answers,
the participants will learn the structure and components of the Code from
loading circuits, wiring methods, and equipment installation from the general
use sections as well as the specific sections of the Electrical Code.
Course No: ..........ECR 1/15
Start Date: ..........Wednesday February 4, 2015
Time:....................6:30pm – 9:30pm
Sessions: .............6
Location: .............Mississauga Training Centre
This course is designed to provide members the fundamentals of mechanical
bending through shop lectures and hands-on exercises. Students will learn
the methodology of ‘practice precision’ while working with EMT ranging in
size from ¾” to 1 ¼” and a demonstration of 2 ½”.
This course also offers mathematical formulas, application techniques and
safety procedures, and allows the students to familiarize themselves with
common bending equipment and correct set-up and operation for the job site.
NOTE: Safety shoes or work boots
must be worn during class.
Course No: ..........CFII 1/15
Start Date: ...........Monday March 2, 2015
Time: ..................6:30pm - 9:30pm
Sessions: .............10
Location: .............Mississauga Training Centre
Conduit Fabrication –
Level III
Trade Applications
This review course is being sponsored by the Examining Board to assist
members with reclassification and preparing for the exam.
Topics covered in this program include:
• Conduit bending and installation of EMT and rigid conduit, core line
and PVC
• 3-phase power – including load balancing, 3-phase and neutrals
• Current safety and code regulations
• Grounding services and transformers
• Class of power
• Class of fuses
• Line hazards and tag and lock procedures
When complete, students will be better prepared to write the exam.
Prerequisite – Conduit Fabrication Level II or
equivalent trade experience.
Students will learn cutting and threading techniques for small and large rigid
conduits through a variety of hands-on assignments and lectures. These
techniques will include the use of hand, portable and industrial power tools.
Students will also learn safety procedures as they apply to the various pieces
of equipment.
Along with the cutting and threading of rigid conduit, students will learn how
to bend rigid conduit using various styles of benders and some of the
nuances between rigid conduit and EMT systems.
NOTE: Safety shoes or work boots must be worn during class.
Course No: ..........CFIII 1/15
Start Date: ...........Wednesday February 11, 2015
Time: ..................6:30pm - 9:30pm
Sessions: .............10
Location: .............Mississauga Training Centre
Course No: ..........TRADE 1/15
Start Date: ...........Saturday February 28, 2015
Time: ..................8:00am – 12:00pm
Sessions: .............9
Location: .............Mississauga Training Centre
PAGE 8
Welding – The Fundamentals
Prerequisite – Journeyperson Electrician.
**THERE IS A $250.00 NON-REFUNDABLE REGISTRATION FEE
THAT MUST BE PAID PRIOR TO THE START OF THE FIRST CLASS**
This course is designed as the first step for members interested in certified
welding within the electrical trade. This fundamental course will allow the
students to become familiar with the equipment and tools used to do
Shielded Metal Arc Welding (SMAW) and oxy-acetylene cutting. Students
will practice the SMAW stick process in the flat, horizontal, vertical up and
overhead positions depending on the individual students’ ability. All practical
exercises will be reinforced through general class sessions that will include
welding theory, safety and symbology.
**Please note that the first class will start at
6:00pm to facilitate the distribution of PPE**
NOTE: PPE, safety shoes or work boots
must be worn during class.
ESTIMATION
Electrical Estimating - Introduction
This course is ideal for electricians with a desire to learn the basics of
producing electrical construction estimates. The course will take the
students from an overview of electrical estimating to performing actual
estimates.
The focus is on practical information rather than a textbook. This course is
designed for the service-small jobbing environment and will offer an
approach to material take-off including appropriate order and types of forms
available.
Topics such as where to start, material, pricing, recapping and quotations are
also covered.
Course A:............IEE 1/15
Start Date: ...........Thursday February 5, 2015
Time: ..................6:30pm – 9:30pm
Sessions: .............11
Location: .............Oshawa Training Centre
Course No: ..........WELD 1/15
Start Date: ...........Monday January 26, 2015
**Runs Monday and Wednesday nights
Time:....................6:30pm – 9:30pm
Sessions: .............12
Location: .............Mississauga Training Centre
Fee: .....................$250.00 **non-refundable
Course B: ...........IEE 2/15
Start Date: ...........Monday February 23, 2015
Time: ..................6:30pm – 9:30pm
Sessions: .............11
Location: .............Toronto Training Centre
Welding – Level I
Prerequisite – Journeyperson Electrician and Welding – The
Fundamentals or equivalent experience.
This course is designed as the second step for members interested in
certified welding within the electrical trade. This Level I course will allow the
student to become more familiar with the equipment and the tools used to
do Shielded Metal Arc Welding (SMAW). Students will practice the SMAW
stick process, honing their skills in the flat and horizontal positions, to
prepare for the Canadian Welding Bureau (CWB) test on these two positions.
Practical exercises will be reinforced through general class sessions that
will include a continuation of welding theory, safety and symbology.
A testing date will be established closer to the end of the course for students
who are ready. A separate charge will apply for testing costs. Members
taking this course are asked to bring their original manual from the “Welding
Fundamentals” class as we will be adding material to it.
NOTE: PPE, safety shoes or work boots
must be worn during class.
Computerized Electrical
Estimating – Part I
Prerequisite – Journeyperson Electrician with computer
literacy and successful completion of Introduction to
Electrical Estimating.
This program uses Accubid software and is designed to teach individuals sound
principles and proven methodologies of hands-on professional estimating. This
course focuses on estimating techniques that emphasize accuracy and detail
during takeoff. In addition to being taught hands-on techniques for counting and
measuring materials during takeoff phase, students are shown how to organize
those takeoffs into logical and functional breakdowns.
Throughout this course, students will exercise these principles and
techniques by performing an instructor-led real-world type estimate using
the latest in state-of-the-art Accubid software tools and materials.
Course No: ..........WELD1 1/15
Start Date: ...........Monday March 23, 2015
**Runs Monday and Wednesday nights
Time:....................6:30pm – 9:30pm
Sessions: .............14
Location: .............Mississauga Training Centre
Course No: ..........CEE 1/15
Start Date: ...........Monday February 2, 2015
Time: ..................6:30pm – 9:30pm
Sessions: .............11
Location: .............Toronto Training Centre
REGISTRATION OPENS ON MONDAY JANUARY 5th AT 7:30am
IN PERSON or ONLINE at http://lu353.com/Spring2015.html
If you are interested in taking more than two courses for the Spring 2015 session, please call the
information line at (416) 510-5284 or the Education Office after January 12th for available courses.
PAGE 9
RENEWABLE ENERGY
SAFETY
Solar Energy – Level I
*First Aid and CPR
Introduction to inverter-based electrical power
generation, storage and grid-tie.
This is a two (2) session standard course where the participants receive
training, testing and certification in both First Aid and CPR and a manual to
keep for your own use.
Prerequisite – 309A license holder or 309A Apprentice.
**NOTE: A COPY OF YOUR CURRENT 309A LICENSE,
OCOT MEMBERSHIP CARD OR JAC REFERENCE NUMBER
MUST BE INCLUDED WITH YOUR REGISTRATION OR IT
WILL NOT BE PROCESSED.
*In order to successfully meet the requirements of this program,
you must be on time and attend and complete both days. *
This is the first of two courses to introduce the student to the production of
usable power from Photo-Voltaic technology.
The student will learn the theoretical aspects of today’s solar PV technology
and become familiar with the terminology, calculations and what to consider
for proper site location, sizing and designing these systems.
This course will demonstrate the construction of solar arrays, and the
installation of inverters. Students will also review the 2012 electrical code
requirements, and focus on the applicable concepts for grounding and
bonding as well as the Ontario – Micro and Fit regulations and work through
the requirements of this initiative.
Although this is not a hands-on course in Solar I – it includes working
through a system design from concept to final layout including financial
analysis and all major considerations for Solar PV.
Solar Energy – Level I is recognized by the National Joint Apprenticeship
and Training Committee (NJATC) and successful completion of this course
entitles the student to the Construction Council of Ontario (CCO) Solar
Installer certification card.
Course A:............SOLE 1/15
Start Date: ...........Thursday February 19, 2015
Time: ..................6:30pm – 9:30pm
Sessions: .............10
Location: .............Mississauga Training Centre
Course A:............FA&CPR 1/15
Start Date: ...........Saturday February 21 AND
Saturday February 28, 2015
Time: ..................8:00am – 4:00pm
Location: .............Mississauga Training Centre
Course B: ...........FA&CPR 2/15
Start Date: ...........Saturday April 18 AND
Saturday April 25, 2015
Time: ..................8:00am – 4:00pm
Location: .............Barrie Training Centre
*Certification Part II –
Construction Sector Program
Before JHSC members can become fully certified, they are required to
complete a second round of training commonly known as Certification Part II
training. This training is designed to help certified representatives identify,
assess and control, or better yet eliminate, hazards specific to their workplace.
The Construction Sector program covers the hazards of workplaces typical
in the construction sector including worker trades committees; hazards of
dust and fibres; electrical hazards; confined space entry hazards; hazards
of cranes, hoists and rigging; welding hazards among others.
Course B: ...........SOLE 2/15
Start Date: ...........Wednesday February 25, 2015
Time: ..................6:30pm – 9:30pm
Sessions: .............10
Location: .............Toronto Training Centre
Course No: ..........SAFE2 1/15
Start Date: ...........Wednesday February 25, 2015
Time:....................6:30pm – 9:30pm
Sessions: .............10
Location: .............Mississauga Training Centre
Solar Energy – Level II
Prerequisite – Journeyperson Electrician
and Solar Energy – Level I
Shop Steward Training
In the second level of the solar energy training, the student will build on the
theoretical knowledge of photovoltaics learned in Level 1. We will also
introduce some practical assembly and operational demonstrations. After
completion of the course the student will be prepared to write the Canadian
Standards Association’s (CSA) examination for solar photovoltaic electrician
qualification (NOC 7241). The CSA exam includes PV- related knowledge
areas such as safety, fire prevention, fall arrest and movable work platforms.
2012 electrical code bulletins from the Electrical Safety Authority (ESA) and
CSA guidelines will be reviewed in-depth. The course will cover site
evaluation and preparation and will look at roof structures and types of
roofing materials.
Energy storage technology and the different types of batteries will be
presented. Introduction of standalone inverter systems and micro-inverter
based systems will also be covered.
**NOTE: There is a maximum of 12
registrants in this class.**
Prerequisite – Journeyperson Electrician.
The IBEW Local 353 Steward’s course will present the member with valuable
information covering many areas of concern on the job site. Members will
review the roles and responsibilities of the Steward, including labour studies,
WSIB processes and health and safety issues. Topics to be covered also
include the union at the job site, resources at the job site, representation of
members, disputes on constructions sites and dispute resolution
alternatives.
We will also look at the grievance procedure, including documentation, filing
procedures and the role of the Steward in a grievance. An introduction and
overview of the collective agreement, the IBEW constitution and Local 353
by-laws is also included.
This course will fill up quickly, so sign up as soon as possible as current
working and past Stewards will be given priority.
Course No: ..........SST 1/15
Start Date: ...........Monday January 26, 2015
Time:....................6:30pm – 9:30pm
Sessions: .............14
Location: .............Toronto Training Centre
Course No: ..........SOLEII 1/15
Start Date: ...........Tuesday February 3, 2015
Time: ..................6:30pm – 9:30pm
Sessions: .............12
Location: .............Mississauga Training Centre
PAGE 10
TEXTBOOKS AVAILABLE
COURSE ELIGIBILITY
The Education Committee has the following textbooks available for
purchase at a members preferred price at the Local Union office:
• Electricians Guide to AC Motor Control
• Electricians Guide to Conduit Bending
• Ugly’s Electrical Reference Guide
• Ontario Electrical Safety Code - 2012 Edition
• The Illustrated Code Series Electrical....NEW!
Courses are open to Journeypersons and Senior Apprentices
who have successfully completed Advanced Trade School
unless otherwise noted in the prerequisite of the course
description.
Courses marked with an asterisk (*) are open to all
members.
$27.00
$15.00
$15.00
$190.00
$125.00
EDUCATION COMMITTEE
COURSE REIMBURSEMENT
Members who enroll in trade related courses other than those
offered by the Local may be eligible to have the course fee
reimbursed (up to $250 per calendar year) under the following
guidelines:
Bradley Watt
Chair
Sharon Watt
Recording Secretary
Mike Belpario
Howard McFadden
Eric Silva
Robert White
a) The application form must be completed in FULL.
b) A course outline, proof of payment and proof of successful
completion and/or attendance must be included.
David Latiuk-Kulesza
Ken Nicholl
Mark Steane
Arthur Verway
EDUCATION FUND TRUSTEES
c) The course must be trade related as determined by the
Education Committee.
Steven Martin
d) The applicant will be reimbursed when the following
requirements are met:
Robert White
Business Manager/
Financial Secretary
President
LOCAL 353 EDUCATION
& TRAINING CENTRE
a. Attending 80% of the course program
b. Successful completion
c. Any pre exam course applicant must write and pass (and
provide proof) that specific exam.
Lee Caprio
There is a ceiling of $250.00 per calendar year. Reimbursement
applications are available at the Local Union office reception or
through the education department. It takes approximately 8 –
12 weeks to process requests. They are approved on a
quarterly basis by the Education Committee.
Bradley Watt
Director of Educational
Services
Education Coordinator
EDUCATION & TRAINING
INFORMATION LINE (416) 510-5284
Press
REGISTRATION IS ON A
FIRST-COME-FIRSTSERVED BASIS.
If you are interested in taking two or more
courses for the Spring 2015 session, please
call the information line at (416) 510-5284 or
the Education Office after January 12th for
available courses.
PAGE 11
For:
1
Course cancellations
2
Notices
3
Contacts:
Press:
Katherine Hoy
0
Bradley Watt
1
Cindy Olders
4
7
Repeat menu
8
Return to education menu
9
Return to main menu
0
Speak with the Education Admin Office