Revision - Banner Engineering

Declaration of Conformity
Manufacturer:
Banner Engineering Corp.
Address:
9714 10th. Ave. N.
Minneapolis, MN 55441, USA
M25UEQ8
M25URBQ8
Herewith declares that:
– is in conformity with the provisions of the
following Directives:
Low Voltage Directive 2006/95/EC
EMC Directive 2004/108/EC
IEC 60947-5-2
EN 55011
and that:
– the following (parts/clauses of)
harmonized standards, national technical
standards and specifications have been used:
EU Notified Body:
N/A
For specific models, covered under this DOC, see attached Schedule(s).
I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s) and Standard(s).
09
Roger Eagle/Regulatory Compliance and
New Product Quality Assurance Manager
09
P. Mertens/Managing Director
Banner Engineering Belgium BVBA
Park Lane, Culliganlaan 2F
1831 Diegem, Belgium
2014
/ 01 /
MM/DD/YEAR
Minneapolis
Place
01
2014
/
/
MM/DD/YEAR
Diegem
Place
BANNER P/N
1572 REV. B
Declaration of Conformity
Attached Schedule — Schedule 1 of 1
The following models were added to this DOC on:
09
/ 01 / 2014
MM/DD/YEAR
M25UEQ8
M25URBQ8
All models have been tested and conform to the following Harmonized Standards and the specific Edition/Year thereof:
Edition/Year
Harmonized Standard
IEC 60947-5-2
EN 55011
2007
2009+A1: 2010