1. No category

5.25" 70W SHIELDED WOOFER
POLYSTYRENE
CAPACITORS
NPC 4000J
NPC 4700J
NPC 5000J
PF
4000
4700
5000
15000
18000
CAT#
CS-402
CS-472
CS-502
CS-153
CS-183
Price
5 for 50¢
5 for 50¢
5 for 50¢
5 for 60¢
5 for 75¢
100
$7.00
$8.00
$7.00
$7.50
$8.00
0.10 MFD 10%
3KV CAPACITOR
$12.30 ea.
3.5” ROUND PIEZO
3.5" dia., wide dispersion piezo
tweeter. 60 Watts RMS @ 5 KHz.
Frequency response, 3.5 - 30 Khz.
96 db @ 1W/ 1m.
$15.00 each
SPEAKERS
20 MM, 32 OHM SPEAKER
Hosiden # HDR0990. 20mm (0.80") dia. x
0.10" thick. 32 Ohms. Peel-off adhesive
ring of tape on speaker face. Solder leads.
Large quantity available.
CAT# SK-230 2 for $1.00 • 100 for 40¢ ea.
700 for 30¢ each • 1400 for 20¢ each
20 MM, 150 OHM SPEAKER
Hosiden HDR960. 20mm, 150 ohm
dynamic element. 0.79" diameter x
0.1" thick. Large quantity available.
CAT# SK-215 2 for $1.00
100 for 40¢ each • 1000 for 25¢ each
8 OHM 36MM FLAT SPEAKER
Panasonic# 3P128A. 8 ohm 0.3W poly
cone speaker. 36mm round x
4mm thick. Two 6" wires that terminate
to 3 pin connector. 80 db, 530Hz~4kHz.
CAT# SK-342
CAT# GW-2058
TWEETER
Chicago Condenser Corp.
# CQ72E1GL104K1. Type #3943
Oil-filled capacitor with ceramic
terminals. 2.60" x 1.25" x 3.8" high.
CAT# OFC-104
8 ohm impedance. Rolled foam
edge with poly laminated cone.
Shielded for use with computers or video. 16 oz magnet.
1" voice coil. 70 Watts / 130 Watts
max. 62 - 9 KHz frequency
response. 84 dB @ 1W/ 1m.
$1.00 each
50MM 4 OHM SPEAKER
4 Ohm, 2 Watt speaker. 50mm
overall diameter. 17mm thick.
CAT# SK-504 $1.25 each
100 for $1.00 each
8 OHM 40MM SPEAKER
40mm diameter x 6mm thick. 8 Ohm,
general purpose speaker. 2" leads
with 2-conductor female connector,
2mm centers. Large quantity available.
CAT# SK-840 75¢ each
10 for 70¢ each • 100 for 60¢ each
2” 4 OHM SPEAKER
CAT# GT-1056 $3.50 each
PAGING HORN
Universal# SP-20B.
Horn-type communication
speaker. 20 Watt 8 Ohms.
5.25" dia. x 6" long. 3-hole
adjustable mounting
bracket. 12" leads.
CAT# PHS-20 $4.95 each
24 for $4.25 each
MINI-FLAT-PANEL SPEAKER
FPS # FPS0202M7C4. Miniature flat-panel,
cone-less speaker, in a
1.33” X 1.45” x 0.38” enclosure with a black metal
grill and 24” cable w/ 2-pin
socket connector. 4.5 Ohm impedance, rated 2W, 4W peak, 360-20kHz.
An unusual speaker with four small magnets and coils.
CAT# SK-453 $1.00 each
MINI AUDIO
MINI-STEREO AUDIO AMPLIFIER W/
SPEAKERS
Miniature 4W
(2 x 2W) stereo
amplifier with
speakers and
battery holder. 3.5mm stereo phone plug
input for portable audio sources, MP3s, iPods
etc. The on-off switch and volume control are in a
34mm square module attached to the amplifier with a
29" cable. The speakers are 1.30" x 1.45" x 0.36" coneless, flat-panel speakers with narrow bandwidth. The
amplifier sounds much better with traditional 4 Ohm
cone-type speakers. Operates on four AA batteries,
not included. CAT# AMP-5 $6.50 each
STEREO AMPLIFIER
Boston Acoustics# 304-050001-00
2” cone with soft rolled edge.
4 Ohm impedance. Shielded
magnet. Overall depth, 1.61”.
CAT# SK-304 $2.00 each
10 for $1.75 each
2.25" 45 OHM 1W SPEAKER
Clear poly cone.
2.25" O.D. 45 Ohm, 1W.
CAT# SK-145 $1.25 each
10 for $1.10 each • 200 for 95¢ each
2-1/4" 63 OHM SPEAKER
63 Ohm, 0.25W speaker.
Square frame, 2.27" x 2.27" x
0.72" thick. CAT# SK-63
$1.25 each • 100 for 90¢ each
Great stereo sound.
Ideal for music or
PA applications,
this 20W per
channel amplifier
was designed for use
in a portable outdoor music
system. The speakers connect to
pigtail leads and a 3.5mm phone plug
is provided for computer input, iPhone, AppleTV or
other music source. There are no external controls; volume is controlled from the music source. But, using an
iPhone or comparable source, you get plenty of volume
adjustment, from silent to quite loud. A button on the
front panel mutes the sound. Also has a 120Vac output
cord for connection of other auxiliary equipment.
Heavy-duty metal cabinet, 9.5" x 8.5" x 2".
CAT# AMP-15
FAST FRIENDLY SERVICE
$25.95 each
69
4-POSITION PLUGGABLE
TERMINAL STRIP AND HEADER
Riacon 4-position screw-clamp terminal
block and mating friction-lock header.
Terminals on 5mm centers. For 12-28
AWG wire. Rated 6A/125Vac. UL, CSA.
CAT# TER-104
$1.25 each
EUROSTYLE TERMINAL STRIPS
For connecting
stripped wires
from 8-22 AWG
depending on
the block size.
Flexible white
(natural) Nylon
66 body, 94V2 rated for 105º C. 400 Volts. All metal
parts are completely recessed in the housing to prevent shorts. Each strip has 12 circuits, with a mounting hole between each circuit. Can be easily
shortened with a knife or saw.
7 AMP
For 22-18 wire. 3.78” x 0.67” x 0.57” high.
0.32”(8mm) terminal centers. UL, CSA, VDE.
CAT # TB-7 $2.00 each
10 for $1.80 each • 100 for $1.60 each
20 AMP For 18-14 wire. 4.6” x 0.80” x 0.67” high.
0.39”(10mm) terminal centers. UL, CSA, VDE.
CAT # TB-20 $2.25 each
10 for $2.10 each • 100 for $1.80 each
35 AMP
For 14-10 wire. 5.51” x 0.93” x 0.74” high.
0.47”(12.2mm) terminal centers. UL.
CAT # TB-35 $2.70 each
10 for $2.45 each • 100 for $2.15 each
50 AMP
For 20-8 wire. 6.25” x 1.00” x 0.99” high.
0.53”(13.5mm) terminal centers. UL.
CAT # TB-50 $4.00 each
10 for $3.85 each • 100 for $3.60 each
SPRING-LEVER
TERMINAL STRIPS
Red and black spring-loaded terminals for
speakers and audio devices.
2.25" SQUARE BEZEL
Recessed cup fits a
50mm (1.95") diameter
round cut out. 57mm (2.23")
square bezel w/ counter-sunk
mounting holes in each corner.
CAT# SWT-202 2 for $1.00
100 for 35¢ each
3" ROUND BEZEL
Recessed cup fits a 50mm
(1.95") diameter round cut out.
75mm (3") diameter bezel with
four countersunk mounting holes.
CAT# SWT-203 2 for $1.00
100 for 35¢ each
SPRING LEVER TERMINALS
4-pair spring-lever terminals.
Accepts wire up to 12 AWG.
PC pin terminals (could be
wrapped and soldered).
CAT# SLT-8
$1.50 each
DUAL SPRING-LEVER TERMINALS
Surface mount. Mounting tabs on
44mm centers. 20.33mm x 55mm x
14.5mm. Solder terminals.
CAT# SLT-25
2 for $1.00 • 100 for 35¢ each
4-CONDUCTOR
Surface mount. Accept up to
12AWG wire. 2.75” x 0.97”
footprint. Mounting holes on 2.38” centers.
Solder-loop terminals. CAT# SLT-45 95¢ each
10 for 80¢ each • 100 for 70¢ each
FLOAT SWITCH WITH
INTEGRATED THERMISTOR
Gems Sensors 222727
Horizontal liquid level
float switch. For sensing
rising or falling liquid
levels (normally open
or normally closed).
Hermetically sealed
magnet and reed switch
for accurate, reliable long-life operation.
Integrated 10K ohm NTC thermistor
New
allows monitoring of liquid temperature
as well. Threaded 13/16" male Nylon stem.
Polypropylene float, 2.4" long from hinge to end.
Four 10" leads, two for switch (red) and two for
thermistor (green).
CAT# FLW-1 $6.75 each
10 for $6.25 each • 100 for $5.90 each
KEYPADS
12 BUTTON KEYPAD
12 button matrix-encoded keypad.
Tactile buttons. Black housing,
2.7” x 2” x 0.21”. White buttons with
black numerals. Contacts rated
30 mA @ 12 Vdc. Mounts from top.
Four stabilizing pins on 1.7” X 2.4”
centers. 7-pin header, 0.1” centers.
CAT # KP-22
$7.50 each
10 for $7.00 each
12 BUTTON KEYPAD
12 key keypad with numerals
0 -9, * and #. One common
terminal. Contacts rated 20 mA @
24 Vdc. 2.01" x 2.24". Black with
white buttons. Mounting holes on
1.8" x 2.24" centers. Can be
rear-mounted through a
2.25" x 1.81" cutout.
CAT# KP-12
$4.95 each
16 BUTTON INDOOR /
OUTDOOR KEYPAD
Fully-sealed, tactile snap-dome
contacts. Contacts rated
30 mA @ 12 Vdc. 4 x 4 buttons
(2.7” x 3” x 0.36”). Ten black keys
numbered 1 to 0 (and A to J).
Five blue keys with up-down arrows, CLEAR, HELP
and ENTER. One red key labeled 2ND. TTL, MOS
and DTL compatible. 9-pin headers, 0.1” spacing.
See spec sheet on our web site for more info.
CAT # KP-23 $12.50 each
10 for $11.50 each
ORDER TOLL FREE 1-800-826-5432
91