Microcare Pure Sine Wave Bi

MPPT Regulators, Pure Sine Wave Bi-Directional inverters, Grid Tied Inverters, and Grid Tied Limiters
are designed, developed, and manufactured by MICROCARE in Port Elizabeth, South Africa
Microcare Pure Sine Wave Bi-Directional Inverters
Microcare Inverters have been manufactured in Port Elizabeth, South Africa for more than 25 years.
During this period Microcare has manufactured and sold thousands of inverters locally and
internationally through our wide range of agents and distributors. Microcare has become synonomous
with quality and service delivery to a wide range of diverse markets and customers.
The technology has been upgraded and the current range of inverters use High Frequency Pulse
Width Modulation (PWM) to regulate the output of the inverter. The updated circuitary allows for
smaller units and more cost effective quality performance. The inverters are pure sine wave with very
low distortion and good regulation. The units incorporate battery low, overload, lightning protection,
load sensing and LCD display as standard.
Our inverters are short circuit proof, and our built in lightning protection offers safety not seen in a
pure sine wave inverter previously.
As we are a South African manufacturer, we are able to offer real time technical support to all our
customers, no matter where in the world they may be, and should there be a neccesity tocarry out
repairs, we can turn the repair around in a 24-72 hour time period.
Features:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
st
Available for 36v/48v DC systems
Output power from 10Kw – 15Kw
LCD Display
Low idle current
High Surge capacity for motor start
Timed Overload capacity with Auto-Shutdown
3 Attempt Auto Restart
Protection against short circuits
Built in battery charger
Locally manufactured
Minimum Service Turnaround
Fan cooling for optimum performance
Audible Buzzer indicating faults and overload conditions
3 Year Warranty
1 Floor Neave Industrial Park, 7 Bennett Road, Korsten, Port Elizabeth – P O Box 7227, Newton Park, 6055 – Email: [email protected]
Tel: 041 453 5761 Fax: 041 453 5763 – VAT Registered: 4480110222 – www.microcare.co.za
48 Volt Inverters
Capacity
Input
Output
Watt
Nominal Voltage
Acceptable Voltage Range
Maxi Input Amps
Standby Power (Manual mode)
Voltage
Amps
Voltage Regulation
Frequency
Frequency Regulation
Power Factor
Wave Form
Efficiency
Overload Protection
Charger
Float Voltage
Boost Voltage
Boost Time
Maximum Current
Generation Mode
st
10Kw 48volt
15Kw 48volt
10000
48 Vdc
40-60 Vdc
250
100 watts
220 Vac
45 amps
< 3 % RMS for entire battery voltage range
50Hz
± 0.1Hz
1
Pure Sine Wave
92%
Circuit Breaker
Programmable Overload Levels and Auto
Retry
55.2
57.2V – 62.0V
Selectable 1, 2, 3 hours.
100 amps
Depending on the generator power available.
15000
48 Vdc
40-60 Vdc
375
150 watts
220 Vac
68 amps
< 3 % RMS for entire battery voltage range
50Hz
± 0.1Hz
1
Pure Sine Wave
85%
Circuit Breaker
Programmable Overload Levels and Auto
Retry
55.2
57.2V – 62.0V
Selectable 1, 2, 3 hours.
150 amps
Depending on the generator power available.
1 Floor Neave Industrial Park, 7 Bennett Road, Korsten, Port Elizabeth – P O Box 7227, Newton Park, 6055 – Email: [email protected]
Tel: 041 453 5761 Fax: 041 453 5763 – VAT Registered: 4480110222 – www.microcare.co.za