Download Report

SPECIALTY STOCK PARTS: MIL-SPEC
MIL-SPEC Springs
Compression MS24585 and Extension MS24586
MIL-SPEC Springs available in Stock.
When you need MIL-SPEC Springs, Lee Spring
simplifies the purchasing process by offering the full
range of MIL-SPEC Compression Springs and
Extension Springs.
• Simplified pricing – no complicated price grids.
• Paperwork included – no additional charges for
material certifications or traceability.
• Free ground shipping – on orders from 10 to
1000 pieces.
• DFARS Compliance – all Stainless Steel Mil-Spec
springs meet DFARS specifications.
Materials:
• Quick RFQ turnaround – quantities over 1000.
• Uncoated Music Wire per ASTM A228.
About MIL- SPEC Springs
These products are part of the United States Defense
Standard. They are used to help achieve
standardization objectives set by the U.S. Department
of Defense. They are known interchangeably as
“military standards”, "MIL-SPEC", “MIL-STD", or
"MilSpecs." These high precision designs meet
stringent technical requirements and are used in a
multitude of Military and Aerospace applications, both
defense and non-defense related. MIL-SPEC springs
are increasingly specified by other non-Defense
government organizations, technical organizations, and
highly regulated industries. The MIL-SPEC standard
for compression springs for loads below 20 lbs. is
AS24585; this standard was formerly MS24585. The
MIL-SPEC standard for extension springs for loads
below 30 lbs. is AS24586; this was formerly
MS24586.
• Cadmium Plated Music Wire in accordance with
SAE-AMS-QQ-P-416, Type II, Class 2.
• Zinc Plated Music Wire in accordance with
ASTM B633, Type II, Fe/Zn5.
• Corrosion Resistant Stainless Steel 302 per
ASTM A313 with passivation treatment in
accordance with ASTM A967. DFARS Compliant
material only.
About DFARS Compliance
DFARS regulates the supply country for certain
materials. It applies to Stainless Steel but does not
apply to Music Wire. For a complete explanation of
DFARS Compliance, go to the Regulatory
Compliance and Certification Page 342.
MIL-SPEC COMPRESSION SPRINGS
All MIL-SPEC springs are available in the four
authorized AS24585 and AS24586 materials:
Lee Spring can manufacture custom MIL-SPEC
springs to your specifications. Contact us today!
leespring.com • Call: 888-SPRINGS (888-777-4647) • Fax: 888-426-6655
293
SPECIALTY STOCK PARTS: MIL-SPEC
MIL-SPEC Springs
Guide to using tables
Lee Stock Number:
OD:
W:
Active Coils:
Load:
Price Group:
Lee Spring Part Number.
Spring outer
diameter, parts listed
in ascending order.
Wire diameter
of spring wire.
Those coils which
are free to deflect
under load.
The design load or force
to compress spring by its
deflection design.
Reference for
price list. See
fold-out section
at rear of book.
MUSIC WIRE
UNPLATED
(U)
CAD. PLATE
(C)
MS24585-1
MS24585-2
MS24585-3
MS24585-4
MS24585-5
MS24585-6
MS24585-7
MS24585-8
MS24585-9
MS24585-1001
MS24585-1002
MS24585-1003
MS24585-1004
MS24585-1005
MS24585-1006
MS24585-1007
MS24585-1008
MS24585-1009
MS24585-10
M
MS24585-1010
ZINC PLATE
(Z)
OD
W
PASSIVATED
(S)
IN
IN
IN
.016
.250
.310
.380
.440
.500
.560
.620
.690
.750
4.50
6.25
7.75
9.25
10.50
12.00
13.25
15.00
16.50
.250
5.25
MS24585-C1
MS24585-C2
MS24585-C3
MS24585-C4
MS24585-C5
MS24585-C6
MS24585-C7
MS24585-C8
MS24585-C9
MS24585-2010
.120
MS24585-C10
FREE ACTIVE DEFLECTION
LENGTH COILS
PER COIL
IN
.0210
LOAD
DEFLECTION SOLID
HEIGHT
RATE
PRICE
GROUP
LB
IN
IN
LB/IN
U
C
Z
1.837
.095
.131
.163
.194
.220
.252
.278
.315
.346
.104
.132
.156
.180
.200
.224
.244
.272
.296
19.30
14.00
11.30
9.50
8.30
7.30
6.60
5.80
5.30
AN
AN
AN
AN
AN
AN
AN
AN
AN
AO
AO
AO
AO
AO
AO
AO
AO
AO
AO
AO
AO
AO
AO
AO
AO
AO
AO
.091
.130
28.20
AN
AO AN
AO
Deflection Per Coil:
Deflection:
Solid Height:
Rate:
The overall height of
the spring in the
unloaded position.
Amount of movement
per coil to achieve the
design load.
The amount of spring
movement under the
design load.
Length when fully
compressed.
Change in load
or force per unit
of deflection.
Be sure to specify the complete numbers
as designated by AS24585 and AS24586.
MIL-SPEC Springs begin with the prefix
MS24585 or MS24586 followed by a
hyphen and the part number,
e.g., MS24585-1002 or MS24586-C13.
The following chart is a helpful reference:
MIL-SPEC
Unplated
Cadmium Plated
Zinc Plated
Stainless Steel
Compression
MS24585
MS24585-1
through
MS24585-527
MS24585-1001
through
MS24585-1527
MS24585-2010
through
MS24585-2507
MS24585-C1
through
MS24585-C527
Extension
MS24586
MS24586-1
through
MS24586-354
MS24586-501
through
MS24586-854
MS24586-1006
through
MS24586-1354
MS24586-C1
through
MS24586-C354
How to Determine Price
1. Select the spring you want by LEE STOCK NUMBER.
2. Read across to the last column PRICE GROUP to obtain the
price code: when applicable, select the price code that
corresponds to the material type required.
3. Refer to the PRICE GROUP in the appropriate pricing chart by
spring type located in the back of this catalog for pricing from
10 to 199 of an item.
4. Minimum Order: 10 of the same LEE STOCK NUMBER.
5. Small Order Shipping and Processing Charge: Prices for 1-9
pieces of the same LEE STOCK NUMBER will be charged at
the 10-piece price, plus an additional $20.00 Shipping
& Processing Charge per order.
6. Prices subject to change without notice.
294
S
Free Length:
Part Numbers
MIL-SPEC COMPRESSION SPRINGS
STAINLESS
STEEL
leespring.com • Call: 888-SPRINGS (888-777-4647) • Fax: 888-426-6655