NDIA Systems Engineering Division Annual Planning Meeting 2013 Summary and 2014 Plans Action Plan Status Committee Reports December 11-12, 2013 With placeholders for inputs from OSD and Services - TBD NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 1 Introduction Status of 2013 NDIA SE Division activities • Relative to 2013 Plan • SED plan from 12/12 meeting, briefed at 2/13 meeting Committee Reports • 2013 Accomplishments • 2014 Plans NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 2 NDIA SED 2013 Tasks - Derived from DoD/Services Initiatives (Voice of the Customer) Summary of DASD(SE) Goals • • • • • Continued excellence in SE support to programs and acquisition decisions Improved, consistent PPP engagement with programs resulting in successful protection strategies ASA (ALT) OCSE DASD (SE) •Dev Planning •SE Workforce •SE methods/ tools •Reliability •Security protection •ExportabiIity •Soldier/Small Unit Challenge •ERS – New processes for Software Assurance, Trusted Microelectronics, Exportability •Anti-Counterfeit Advocacy and impact in ensuring SE workforce capacity •Risk Mgmt and capability Provide depth to acquisition policy and processes with SE •Schedule risk guidance, practices, and continuous learning opportunities •Supplier risks Make progress on areas of DoD interest: – Quantitative Risk Management •Security design – SE Tradespace Analysis •SE models (MBx) – Supply Chain Risk Management and Damage Assessment – Anti-Counterfeit •SoSE – Advanced Modeling for Engineering Resiliency DoD Sys Eng 2012/12/12 | Page-12 Distribution Statement A – Approved for public release by OSR, SR Case # 12-S-3121 applies. Questions NDIA can help answer YSTEMS NGINEERING OLICY 1. 2. 3. 4. SAF AQRE Identify the new skills required of an engineer to succeed on an Agile development team Recognizing that we can’t always create the ideal team, what processes can be developed to assist engineers on an Agile development team The System of Systems mission level requirements analysis process has been identifying requirements that satisfy a mission and allocating those requirements to systems. The relationship between those allocated requirements and the application of new R&D products to meet those requirements is not robust. How can the Navy work with Industry to improve the assessment of the compendium of R&D products* for application to system requirements, to increase success of the Technology Demonstration acquisition phase? DASN RDT&E SE&P 2012 NDIA SE Division – Annual Planning Meeting December 11-12, 2013 DASN (RDT&E) SEP •Agile in acquisition •SoS mission reqts •R&D assessment 5 Verbal Inputs Provided •Policy (levels) •Process •Tradespace •Architecture •Cost Assessment •Specialty Engrg •People / Workforce (specialists vs. generalists) TOC 3 NDIA SED 2013 Action Plan Status # NDIA SED 2013 Tasks Committee Plan 1 Quantitative risk management guidance. [DASD(SE)] SEEC (Brown, Rassa) Ongoing action. Feb workshop planned. Risk workshop planned, deferred. No action in 2012 or 2013 – drop it? 2 Support Engineered Resilient Systems (ERS) initiatives. Link ERS with M&S? [DASD(SE)] SED (Rassa) M&S IEEE/NDIA ERS workshop in planning. Other actions pending. Division organizational emphasis? No action yet, still pending. 3 Anti-counterfeit – SE role, industry feedback for supply chain risk management, augment body of knowledge [DASD(SE)] SED (Henry) Issue SED request for 1:1 company inputs provided direct to DASD(SE). Potential follow-up workshop. Could be company proprietary? Coordinate with other NDIA, AIA, etc. No request from OSD; no action 4 Design Patterns for Security – share SERC research findings (UVA) [DASD(SE)] SED (Henry) Schedule Dr. Horowitz (UVA) for NDIA SED briefing. Done, Feb 2013 SED meeting. NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 4 NDIA SED 2013 Action Plan Status # NDIA SED 2013 Tasks Committee Plan 5 Advanced Modeling: Model Based for “X” (MBx) – how could acquisition strategies be enhanced to use models (RFPs, etc.) [DASD(SE)] M&S (Coolahan) M&S committee study or report. Collect industry input, examples. See M&S plan. 6 SoSE: how to demand articulation and insertion of SoS context during life cycle acquisition? [DASD(SE)] SoS (Dahmann) SoS committee study or report and recommendations. International issues? 7 Soldier / Small Unit Challenge [ASA(ALT)] SED WG (Serna) WG to consider soldier and small unit architecture. Discontinued; lack of Army support 8 Design for Reliability – need RFP language. [ASA(ALT)] LCS (Cothran) Consider input on RFP language. LCS committee is inactive; no chair 9 Security / Protection for coalition operations [ASA(ALT)] System Assurance (Croll) SA committee to consider security issues for coalition – provide recommendations to SED for action SA committee rechartered to SSE NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 5 NDIA SED 2013 Action Plan Status # NDIA SED 2013 Tasks 10 Design for Exportability – BBP 2.0, foreign military sales (FMS), direct commercial sales (DCS) [ASA(ALT)] 11 Reconcile Agile development with DoD 5000.2 acquisition practices, requirements, IPT structure, cost, skills [DASN (RDT&E)] SW (Draper) Conduct workshop. Collect best practices (cross-discipline, SEI, DHS, AFEI, INCOSE, … Partner with SEI, ADAPT. See Agile guidance. Kickoff ‘Agile and SE’ at NDIA SE Conf – WG formation in 2014. 12 Consider how to move tradespace for architecture early in the life cycle (preMDD) Architecture (Sheeley) MA (Lohse) Start initially with white paper vision on use of architecture to bound/expand the trade space (solution agnostic) See Arch and MA status briefings 13 Collect industry best practices for growing and retaining specialists vs. generalists E&T (Gelosh) How does industry keep its specialists? See E&T briefing for status NDIA SE Division – Annual Planning Meeting December 11-12, 2013 Committee Plan No SED action TOC 6 NDIA SED 2014 Actions # NDIA SED 2013 Tasks Committee Plan / Status 1 Brief the existing M&S life cycle cost model report at the NDIA SED February meeting M&S (Bergenthal, Coolahan) Plan for Feb 2014 NDIA SED meeting. 2 Review the Top 5 SE issues report on technical authority and consider if any NDIA actions are appropriate. Consider best practices (industry or government) to implement technical authority. NDIA SED (Henry, Rassa, Draper, Serna) 3 Request DoD briefing on how program startups work (Dave Ahern). Provide industry best practices on program startup/assist teams. NDIA SED (Henry, Rassa) Schedule for NDIA SED meeting briefings. 4 Support MORS affordability handbook development and community of practice initiatives. Affordability WG / NDIA SED Serna 5 NDIA to provide recommendations on deployment of SE 15288.1 and 15288.2 standards (e.g., RFP language, transition, governance, compliance). NDIA SED (Draper / Rassa / Roedler / Henry) Coordinate with joint IEEE/DoD/industry WG. 6 Assess new DoDI 5000.02 and provide recommendations on any NDIA implementation actions needed (impact analysis). SEEC (Brown) or short term WG Focus on industry clarification, adoption and impact analysis. 7 Collect industry best practices for quantitative risk management. NDIA SED (Rassa, Forbes) Establish risk management WG, with meetings held following NDIA SED meetings. 8 Support Engineered Resilient Systems (ERS) initiatives. NDIA SED / IEEE (Rassa) Follow on from open 2013 actions. IEEE activity with NDIA support. NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 7 NDIA SED 2014 Actions # NDIA SED 2013 Tasks Committee Plan / Status 9 Schedule committees for special topics and detailed briefs at NDIA SED meetings. NDIA SED (Henry) Feb: SoS – Aug? April: SSE (PPP) – June? June: M&S August: E&T October (SE Conf plenary?): DT&E 10 Consider ways to increase NDIA SED collaboration internally (committees, other NDIA divisions) as well as externally (other organizations, company representatives) NDIA SED Consider a consolidated and managed list of NDIA external stakeholders at the SED level. Ensure integration without duplicating effort. 11 Several committees could use more industry and government participation – consider ways to build more involvement, given current constraints. NDIA SED Collect all needs and descriptions in a consolidated request to Eng VPs? 12 Document and publicize the procedures for releasing reports through NDIA. Identify which committee products are in draft form that need to be formalized. NDIA SED (Rassa, Britt) Reports need to go through NDIA (Britt) prior to sending to the SED steering group for review. For web publishing send to Britt Bommelje and Rebecca Danahy. 13 Britt to provide a copy of the NDIA SED charter. NDIA Distributed via email. 14 Look at M&S use assessment and identify areas for further tasks to support MBSE. M&S This could be useful to drive other research. NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 8 NDIA SED 2014 Actions # NDIA SED 2013 Tasks Committee 15 Some NDIA SED web pages are badly out of date – SED leadership and committee to update web pages under their areas of control. NDIA SED / Committee Leads 16 ODASD(SE) to provide guidance on next steps for SE Effectiveness study (e.g., briefing SAEs) NDIA SED / ODASD(SE) Dona to provide feedback. 17 Consider a follow-on to the root cause analysis study of PSR findings. NDIA SED / ODASD(SE) Potential POCs: Bob Rassa, Jim Thompson, Pete Nolte, Gary Bliss, … NDIA SE Division – Annual Planning Meeting December 11-12, 2013 Plan / Status TOC 9 Committee Inputs - 2013 Task Progress / 2014 Task Plans Architecture (Arch) Automatic Test (ATC) Development Test and Evaluation (DT&E) Education and Training (E&T) Enterprise Health Mgmt (EHM) Environment, Safety, and Occupational Health (ESOH) Human-System Integration (HSI) – no slides Joint Committee on Systems Engrg in Manufacturing (JCSEM) – no slides Life Cycle Support (LCS) – no slides Modeling and Simulation (M&S) Mission Analysis (MA) Systems Engineering Effectiveness Committee (SEEC) Software Committee System of Systems (SoS) Systems Security Engineering (SSE) NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 10 Architecture Committee – 2013 Task Summary • Meetings: • 7 Virtual meetings • 1 Face-to-face meeting • SE Conference: • 15 papers • Accomplishments: • Completed the DoDAF Recommendations Report • • Delivered it to Steve Henry Posted on the website • Presented Architecture Metrics results (worked in 2012) at the INCOSE Symposium • Participated in SEI SoS Architecture workshop • Received architecture informational briefings / demos from C.Gedo, Architecture Stnds Group (DISA & GTRI), and on J6 Architecture portal from B.Piazza (JS J6) • In-work: • Reviewing whitepaper “Role of Architecture to Influence the Development Planning Tradespace” with the Mission Analysis subcommittee • Open system architecture discussions with Dr. Flietz (AFRL) NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 11 Architecture Committee - 2014 Task Plan Proposed 2014 Tasks: Deliverables/Products • Complete joint Architecture/Mission Analysis white paper “Role of Architecture to Influence the Development Planning Tradespace” • Investigate status and make proposals around subject of Open System Architectures • Initiate joint discussions with Test Committee • “Role of Architecture to Influence the Development Planning Tradespace” whitepaper Schedule / Resources Issues / Concerns: • Release whitepaper 1Q • Initiate Open System Architecture discussions 1Q • Initiate joint Architecture – Test discussions 1Q • Availability of committee members NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 12 Automatic Test Committee – 2013 Status NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 13 Automatic Test Committee - 2014 Task Plan Projects Working Group Proposed 2014 Tasks: • Government/Industry Liaison Reports • Detail, Staff, Schedule & Initiate new ATC tasks: • Industry Survey for Smart Automatic Test System Opportunities • Software Architecture for Synthetic Instrumentation Schedule / Resources Status/Review/Present at regular ATC meetings: • March/April (adjacent DoD ATS Management Board (AMB) Meeting – Gov’t participating committee) at NDIA HQ • September in St Louis (AUTOTESTCON) • December with SED (TBD) No resource issues or support anticipated NDIA SE Division – Annual Planning Meeting December 11-12, 2013 Deliverables/Products • Semi-annual Reports posted on ATC Web-site: • • • • • • US Army ATS Liaison Report USAF ATS Liaison Report US Navy/USMC-Air ATS Liaison Report USMC-Ground ATS Liaison Report DoD AMB Liaison Report Commercial ATS Liaison Report • Deliverables from new tasks: TBD Issues / Concerns: • Only one concern specific to ATC: • Reduced defense budgets and fallout from the Las Vegas GSA meeting has had a significant impact on Government (AMB) participation in many events involving travel – not just NDIA - including holding virtual AMB meetings. • Response: • ATC is holding its meeting at NDIA HQ adjacent AMB scheduled meetings, and will remain flexible in scheduling our meetings to maximize attendance, participation, etc. TOC 14 Developmental Test and Evaluation Committee Status and Plans December 2013 Beth Wilson, Raytheon Steve Scukanec, Northrop Grumman Industry Co-Chairs NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 15 DT&E Committee 2013 Status Activity Plans for 2013 Status/Plans Scientific Test and Analysis Techniques STAT for T&E Effective use of statistical approaches for test optimization (including DOE) with examples White paper complete Preparing journal publications Presented results at SE conference Modeling & Simulation Evaluate test as a stakeholder Joint meetings with SED meetings Propose for 2014 NDIA T&E Conf DT&E panel, STAT report Conference cancelled NDIA SE Conf DT&E tracks Joint tracks, metrics/STAT reports Added Task Dec 2012: Metrics Provide more information on leading indicators for T&E Status: draft report Plans: results at SE conference Added Task Dec 2012: Reliability Develop a better test strategy for reliability (collaborate with IEEE Reliability Society) Discussed at June 2013 meeting Leads identified Nov 2013 Added Task Jun 2013: Cyber Testing Develop recommendations for Cyber Guidelines 2.0 in 2014 Lead and team identified Kicked off Nov 2013 (joint with ITEA) Added Task Jun 2013: Chief Developmental Tester Develop recommendations for industry interaction with Chief Developmental Tester role Lead and team identified Architecture NDIA SE Division – Annual Planning Meeting December 11-12, 2013 Complete In Process TOC Cancelled 16 DT&E Committee - 2014 Task Plan Projects Working Group Proposed 2014 Tasks: Deliverables/Products • • • • • Cyber Testing Recommendations white paper • Chief Developmental Tester white paper • Candidate KSABs for role (E&T) • Industry interaction recommendation • Tutorial on role for SE conference • Inputs to reliability standards effort • Joint meeting notes Cyber Testing Project Chief Developmental Tester Project Collaboration with IEEE Reliability Joint meetings with SED Committees • Modeling and Simulation • Architecture • Systems Security Engineering • Education and Training Schedule / Resources Issues / Concerns: • Cyber Testing Draft Recommendations Feb 2014 • Weekly teleconferences started 12/3/2013 • Full white paper later in 2014 • Chief Developmental Tester • Joint meeting with E&T with SED meeting • Tutorial at SE conference • Reliability standards input for Jan/Aug meetings • Test as a Stakeholder joint meetings with SED • Modeling and Simulation • Architecture • Systems Security Engineering • Industry engagement • NDIA T&E conference may be cancelled (Seattle in March) • ITEA conference (Denver in September) may be postponed and moved NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 17 Summary of DT&E Committee 2013 Results/2014 Plans SE T&E Topic Activity Test Optimization 2013: Scientific Test and Analysis Techniques report/articles Cyber Testing 2013-2014: Industry recommendations for cyber testing Chief Developmental Tester 2013-2014: Industry interaction with new role Performance Measurement 2013: Requirements Verification leading indicators report Reliability 2013-2014: Recommendations for better reliability testing Modeling and Simulation 2014: T&E Perspective for Modeling/Simulation products Architecture 2014: T&E Perspective for Architecture views Education and Training 2014: Chief Developmental Tester role Systems Security Engineering 2014: Cyber testing guidelines connections to Program Protection Planning Completed NDIA SE Division – Annual Planning Meeting December 11-12, 2013 Current Proposed TOC 18 DT&E Committee 2012-2013 Statistical Test Optimization Activity Scientific Test and Analysis Techniques STAT for T&E Plans for 2013 Examples of effective use of statistical approaches for test optimization (including DOE) for an implementation framework Status/Plans White paper complete SE Conference track: 2012 and 2013 ITEA journal publication MORS conference Nov 2013 2012 SE Conference summit/workshop thread -Tutorials on Monday 10/22 - Presentations on Wednesday 10/24 - Synthesis Panel on Wednesday 10/24 Follow-on Results: - DT&E Committee white paper - ITEA Journal article - SE Conference track Oct 2013 2012 - 2013 NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 19 DT&E Committee 2012-2013 Leading Indicator Metrics Activity Metrics (with Performance Measurement WG) Plans for 2013 Provide more information on leading indicators for T&E Status/Plans Draft report Presented results at SE conference 2012 SE Conference workshop - Follow-on workshop with System Performance Measurement WG - Focused on Requirements Verification not addressed in first report Potential Measures Identified: - System Maturity Level - Verification Requirement Maturity - Technical Measures and Stakeholder Need 2012 - 2013 NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 20 DT&E Committee 2012-2013 Reliability Testing Activity Reliability Testing (with IEEE) Plans for 2013 Develop a better test strategy for reliability (collaborate with IEEE Reliability Society) Status/Plans Solicit feedback on existing standards Identify recommendations to improve reliability testing Reliability Testing Focus - Software reliability standard - Cyber testing initiatives - Data for reliability growth measures Input/Feedback Opportunities: - IEEE meetings January and August - Periodic revision periods Project Leads: Lou Gullo, Taz Daughtrey NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 21 DT&E Committee 2013-2014 Cyber Testing Activity Cyber Testing Plans for 2013 - 2014 Review what industry does for cyber testing, expand focus to include interoperability Status/Plans Recommendations for Cyber Testing guidelines Project Lead: Dave Desjardins Joint Project with ITEA NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 22 DT&E Committee 2013-2014 Chief Developmental Tester Activity Chief Developmental Tester Plans for 2013-2014 Status/Plans Review service policies for new role and industry implementations Propose model for industry interaction White paper T&E/SE conference presentations The Secretary of Defense shall require that each major defense acquisition program be supported by— ‘‘(A) a chief developmental tester; and ‘‘(B) a governmental test agency, serving as lead developmental test and evaluation organization for the program. Coordinating DT&E activities Insight into Contractor activities Oversee T&E activities Inform government PM about contractor DT&E results Project Lead: Joe Manas NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 23 Backup DT&E Committee Results 2008-2013 NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 24 Summary of DT&E Committee Test and Evaluation Efforts DT&E Committee Topic Activity DoD T&E Policy Study 2006 – 2008: Workshops and Study Report Improving T&E in the DoD Acquisition Process Integrated Testing 2008 – 2010: Integrated Test Study NDIA presentations and tutorial ITEA journal article RFP Language for T&E 2010 – 2011: Comments for Update to OSD Guide Incorporating T&E into DoD Acquisition Contracts Test Optimization 2012: Statistical Optimization Conference Thread 2013: Scientific Test and Analysis Techniques report/articles Cyber Testing Started 2013: Industry recommendations for cyber testing Chief Developmental Tester Started 2013: Industry interaction with new role NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 25 Summary of DT&E Committee Systems Engineering Efforts SE Collaboration SED Committee Activity Software 2009: SW T&E Summit Recommendations System of Systems 2010 – 2011: T&E for SoS Workshop and Initiatives 2012: Final Report on Best Practices Model Performance Measurement 2012: Leading Indicators for T&E workshop Modeling and Simulation 2011: Effective Use of Modeling and Simulation for T&E 2012: Distributed Model-Based Testing Reliability Started 2013: Recommendations for better reliability testing NDIA SE Division – Annual Planning Meeting December 11-12, 2013 2013: Requirements Verification leading indicators report TOC 26 DT&E Committee Current Structure Since 2010 NDIA Systems Engineering Division NDIA Test and Evaluation Division SED Committee Collaborative Projects T&E Themes For Conferences NDIA Industrial Committee on Test and Evaluation (ICOTE) NDIA DT&E Committee SE Themes & Issues Project Results DT&E Themes NDIA Systems Engineering Conference (Q4) Collaborative Projects T&E Themes & Issues NDIA Test and Evaluation Annual Conference (Q1) Periodic T&E Committee-Focused Conferences Cooperation with other NDIA Divisions DT&E Committee Focus: T&E initiatives aligned with SE, DT&E NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 27 DoD T&E Policy Study August 2006: DT&E Committee Kickoff Policy Study: “Improving T&E in the DoD Acquisition Process” Industry T&E policy recommendations Workshops: August 2007 January 2008 Focus Areas: 1. Earlier contractor and tester involvement 2. Integrated DT/OT and DT operational relevance 3. Suitability April 2008: Report Summarized Results: 10 Findings 15 Recommendations 2006-2008 NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 28 Integrated Testing (CT/DT/OT) Implementation Framework 2008-2010 NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 29 Software Test and Evaluation Software Summit RFP Language Training & Competency Model Policy, Guidance, and Standards 2009 Tools, Automation, Methodologies, Process NDIA SE Division – Annual Planning Meeting December 11-12, 2013 How Much Testing is Enough? Lifecycle and End-to-End Software T&E TOC Changing Paradigms 30 RFP Language Master # Industry # Reviewer Line Comment and Rationale Recommended Input A/R/P # Industry Comments for Update: Incorporating Test and Evaluation Into Department of Defense Acquisition Contracts Recommendations from SW Summit 2010-2011 NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 31 Test and Evaluation for Systems of Systems 2009: “Sleepless Nights” List of Issues 2010: “Sominex” Resulting Initiatives 2010: Workshop 2011: Best Practices Wave Model External Environment Initiate SoS Conduct SoS Analysis Evolve SoS Arch Develop SoS Arch Implement SoS Update NDIA SE Division – Annual Planning Meeting December 11-12, 2013 Continue SoS Analysis Evolve SoS Arch Plan SoS Update Plan SoS Update 2009-2012 Continue SoS Analysis Continue SoS Analysis Plan SoS Update Implement SoS Update Implement SoS Update 2012: Final Report TOC 32 Effective Use of Modeling and Simulation for Test and Evaluation Joint Meeting in August 2011 • Distributed Testing, the Joint Mission Environment Test Capability (JMETC) and the Test and Training Enabling Architecture (TENA) • DoD M&S Community of Interest Data Management Working Group • LVC Architecture Roadmap Implementation (LVCAR‐I) Gateways Effort Applicability to T&E • OSD T&E Working Group • Raytheon Presentation on M&S for T&E • Potential Topics for November AMSWG Meeting 2011 NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 33 Modeling & Simulation for Distributed Testing Benefits: •Find integration issues earlier •Test to learn in ‘safe’ environment •Protect proprietary information •Facilitate DT to OT transition •Increase performance testing range in operating environments •Support end to end studies throughout the program Barriers: •Security •Lack of persistent network •Early consideration of technical issues •Perceived value •Disconnect between the communities (M&S and T&E) Recommendations: •Harmonize the standards for M&S and Test for the life cycle perspective (HLA, TENA, Metadata) •Create a framework for reusing and repurposing M&S through the product model •Establish M&S as part of statistical test design •Determine what tests are conducted to acquire data for model validation. •Fewer test events with better models. •Recommend the use of M&S to do I&T •Recommend establishment of JMETC as a persistent node for industry to engage in MBDI&T Joint Meeting August 2012 Joint Track SE Conference October 2012 2012 NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 34 Education and Training Committee – 2013 Task Summary • Established a Joint Competency Working Group (JCWG) • Includes members from E&T Committee and INCOSE Competency WG • Main objective is to evolve to a globally accepted* and marketed standard competency framework, based on systems engineering effectiveness, that can be used to produce competency models tailored to the needs of the customer organizations. • Developed white paper and proposal to evolve current INCOSE UK Competencies Framework along four paths: • Evolve to an SE role-based competency framework that is extensible, scalable, and tailorable by the customer organization. • Evolve by adding the concept of classes. This is where the competencies achieve their interdependence with each other. • Evolve by including a Professional Class that covers leadership and soft skill competencies. • Evolve by adding a new level of proficiency called the Senior Practitioner to the existing four levels in the INCOSE UK Competencies Framework. NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC product. * Approved for release as an INCOSE 35 Education and Training Committee - 2014 Task Plan Proposed 2014 Tasks: • Develop crisp definitions of Knowledge, Skills, Abilities, Behaviors and Experience. • Develop better definitions of the six classes. • Refine definition of the Senior Practitioner level. • Develop better definitions for each version (0.5, 0.75, and 1.0). • Explore how system complexity affects SE Roles. • Develop use cases. • Ensure consistency with INCOSE Certification program and SE Handbook. Deliverables/Products • • • • • Competencies Framework V 0.5 Competencies Framework V 0.75 Competencies Framework V 1.0 Conference Papers and Presentations Final Report Schedule / Resources: Issues / Concerns: • Two weeks before INCOSE IW 2014, send draft Version 0.5 to JCWG members. • Conduct working session at IW 2014 to finalize Version 0.5. • Conduct working session at IS 2014 to finalize Version 0.75 • Ultimate Goal: Produce Version 1.0 by IW 2015. • Few outside UK use framework – Need to seek broader buy-in early and throughout development process and show how we can use evolved competencies framework to clarify what a SE is, what they do, and why they are important. • Project may face analysis paralysis – Need to set reasonable POA&M, stick with schedule, discuss, move forward, exhibit strong leadership along the way. NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 36 EHM Committee – 2013 Task Summary 2013 Tasks Planned Status Accomplishments (deliverables, etc.) - Comments • Integrated Diagnostics Handbook update In-work Accomplishments: OSD/ATL has been working on rewrite of MilHdbk-1814. EHM participation from May 2013. Effort to continue through mid 2014 NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 37 (EHM Committee - 2014 Task Plan Proposed 2014 Tasks: Deliverables/Products • working with OSD and rewrite of Integrated Diagnostic handbook • Review/Comments of Integrated Diagnostics Handbook as it progresses Schedule / Resources Issues / Concerns: Status/Review/Present at regular EHM meetings: • March/April EHM Meeting • September EHM Meeting • December with SED • No Risks, Barriers or Concerns specific to EHM; However, reduced defense budgets has had a significant impact on Government, and defense contractor participation in many events No resource issues or support anticipated NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 38 ESOH Committee – 2013 Task Summary Completed 2013 Tasks: • Supplemented the new Defense Acquisition Guidebook Chapter 4, Systems Engineering • Teaming with DoD Acquisition ESOH IPT • “Handbook for Human Systems Integration (HSI) & Environment, Safety, and Occupational Health (ESOH) in Pre- Milestone A Analysis of Alternatives (AoA) and Joint Capabilities Integration and Development System (JCIDS) Activities,” published October 2013 • “Guide to ESOH in the Systems Engineering Plan (SEP); Programmatic Environment, Safety, and Occupational Health Evaluation (PESHE); and National Environmental Policy Act (NEPA)/Executive Order (EO) 12114 Compliance Schedule,” published October 2013 • Coordinated with Aerospace Industrial Association (AIA) on rewrite of National Aerospace Standard 411 (NAS411) • Teaming with DoD Acquisition ESOH IPT • Goal of rewrite: provide detailed implementation instructions to contractors on implementation of the MIL-STD-882E, DoD Standard Practice for System Safety, Task 108, "Hazardous Materials Management Plan" • NAS 411, “Hazardous Materials Management Program,” published 30 September 2013 • NAS 411-1, “Hazardous Materials Target List,” published 30 September 2013 • Key element: List of hazardous materials categorized per Task 108 as Prohibited or Restricted • Planned the NDIA SE Conference ESOH Track • Combined HSI and ESOH Track and coordinated abstracts with the HSI Committee • Six abstracts to address MRAP Lessons Learned for Rapid and Urgent Program ESOH management, streamlining ESOH documentation initiatives, and updates on DoD Policy NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 39 ESOH Committee - 2014 Task Plan Proposed 2014 Tasks: • Focus on improving implementation of current DoD Acquisition SE ESOH policy • Continue work with AIA on NAS 411-1 list of Tracked materials • Work with DSOC/SOH Council on memo regarding 15 Nov 2013 Army CAE memo on ESOH risk management and reporting • MIL-STD-882E implementation work • Develop mechanism and collect Industry and Government feedback on policy and guidance • Quarterly webinars Deliverables / Products • List of Tracked Hazardous Materials • Memo co-signed by P&R and DUSD (I&E) • MIL-STD-882E corrections and DIDs • Comments on improving DoD ESOH policy and guidance, and MIL-STD-882E • Webinars Schedule / Resources Issues / Concerns: • NAS 411-1 list of Tracked materials – ECD Dec 2014/funding by AIA and DoD participants • Memo regarding 15 Nov 2013 Army CAE memo – ECD Jun 2014/funding by DoD participants • MIL-STD-882E implementation work – TBD • Develop mechanism and collect Industry and Government feedback on policy and guidance – ECD Dec 2014/funding by participants • Quarterly webinars – ECD June 2014/DoD funded • Agreement between DoD and AIA on Tracked list NDIA SE Division – Annual Planning Meeting December 11-12, 2013 • Time for staffing and advocacy for proposed P&R and DUSD (I&E) memo • Funding for MIL-STD-882E update development • Time and funding for questionnaire development • OSD support TOC 40 Modeling and Simulation Committee – 2013 Task Summary • Final report on M&S use assessment - Briefing on product given at October 2013 Systems Engineering Conference - Key spreadsheet completed and shared with ODASD/SE/SA liaison - Final report draft in progress – to be completed in mid-December • Committee meetings - Meetings held in February, April, June, and August 2013 - Presentations posted on committee web site • Report on essential elements of a System Model - Subcommittee formed in August 2013 Expect final report in July 2014 NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 41 Modeling and Simulation Committee - 2014 Task Plan Proposed 2014 Tasks: Deliverables/Products • Complete study to determine essential elements of a “System Model” that evolves over the life cycle (started in 2013) • Provide continuing situational awareness for M&S Committee members (ongoing) • Motivate submittal of abstracts to populate full-length M&S track at 2014 SE Conference • Final report on essential elements of a System Model • Committee meeting presentations posted on committee web site Schedule / Resources Issues / Concerns: • Final report on essential elements of a System Model – July 2014 • Have some volunteers; need to recruit more • Committee meetings in February, April, June, and August 2014 • Need organizations to volunteer to host • Finding volunteers to work on unfunded study efforts is getting much more difficult in current fiscal environment. • Continuing Government restrictions on travel and fees for professional society activities is creating difficulties in maintaining perception of value of society activities to industry participants. NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 42 Mission Analysis Committee – 2013 Task Summary • • • • Collaborated with ASD R&E/Research on the integration of S&T/IR&D Industry involvement in the Multidisciplinary University Research Initiative (MURI) process Increase Industry awareness and use of Defense Innovation Marketplace Developed draft whitepaper on “The Role of Architecture in the Development Planning Trade Space” with the Architecture Committee Collaborated with the Government DPWG on Development Planning Activities Models Best Practices, Techniques, Methodologies, and Tools Completed all actions from June 2012 NDIA DPWG Workshop, except: Intellectual Property as a barrier to successful DP OCI as a barrier to successful DP Final DPWG Workshop Report not submitted NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 43 Mission Analysis Committee - 2014 Task Plan Proposed 2014 Tasks: • Support the Government DPWG and ASD R&E/Research on an as needed basis • Organizational Conflict of Interest (OCI) Task Collaborate with the Government DPWG to address OCI Develop a clear and concise understanding of the FAR / DFARS language Communicate findings across Gov’t/ Industry • Complete the “Role of Architecture in Development Planning” Whitepaper with the Architecture Committee Deliverables/Products • “Role of Architecture in Development Planning” Whitepaper w/ the Architecture Committee • Final Report on OCI Task findings and recommendations Schedule / Resources Issues / Concerns: • “Role of Architecture in Development Planning” Whitepaper – April 2014 • OCI Findings and Recommendations – June, 2014 • OCI Final Report – August, 2014 • Diminishing number of contributing committee members • Developing Planning instantiation across Government and Industry has been largely successful. It is questionable as to the need to continue the Mission Analysis Committee. Resources may be better utilized elsewhere. NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 44 SE Effectiveness Committee – 2013 Task Summary • Widely disseminated the results of the SE Effectiveness Study through numerous channels • Government presentations o DASD(SE) o USD(AT&L) o DoD SE Forum o Army SE Forum o DoD DPWG • Conference presentations o IEEE Syscon o INCOSE IS2013 o NDIA GVSETS o NDIA SE Conference (panel) • Presentations for INCOSE chapters o Finger Lakes chapter o Space Coast chapter o Chicagoland chapter • Corporate presentations o Westinghouse Nuclear o Northrop Grumman Corp. o Harris Corp. o Boeing • Other presentations o MITRE o INCOSE webinar o Podcast for SEI • Released detailed survey results report • Discussed follow-on work ideas with DASD(SE) • SE self-assessment tool for programs • “Lightweight” Pre-PSR program assessment NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 45 Systems Engineering Effectiveness Committee – 2014 Task Plan Proposed 2014 Tasks: Task 1: Develop a means of measuring risk management process value - Enable the evaluation of risk management in programs - Enable the comparison of alternate risk management paradigms Deliverables/Products • Task 1: Presentation at Annual SE Conference • Task 2: Report out at year-end Planning Meeting • Task 3: TBD - Enable the improvement of risk management processes • Task 2: “Get this* out to the SAEs.”, (awaiting further instructions from DASD (SE) – some possibilities listed below) - Periodic self-assessment of programs Pre- Program Support Reviews (PSR) assessment of programs - Task 3: Establish collaboration effort with INCOSE SE Effectiveness Working Group * The SE Effectiveness Study results (per The Honorary Frank Kendall, USD (AT&L)) Schedule / Resources Issues / Concerns: • • • • • Working agreement with INCOSE SE Effectiveness Working Group Task 1: Oct 2014 Task 2: Dec 2014 Task 3: TBD Task 1 & 2: Assigned liaison from DASD (SE) office NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 46 SoS SE Committee 2013 Task Summary • Committee inputs to TTCP Product addressing SoS at key points in the systems development process • • • • February 2013: Initial presentation of TTCP draft March 2013: Inputs from committee members on TTCP draft November 2013: Shared Updated Product, with request for added inputs December 2013: Inputs coming in now • SoS Webinar Series: SoS Engineering Collaborators Information Exchange (SoSECIE) • 14 Webinars, each with between 40-100 participants • Presentations are posted on SoS SE Website http://www.acq.osd.mil/se/outreach/sosecollab.html • Committee participation SEI workshop on SoS SW Reuse Patterns • Committee Meetings focused on Issues of Interest • • • • February - TTCP Product Review April – T-Area-SoS – EU SoS Research Agenda Development Projects July – Army Victory Architecture (with Architecture Committee) August – M&S and SoS (with M&S Committee) • Six SoS tracks at SE Conference, most joint with other committees • Drafted 15288 annex for systems of systems accepted for revision NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 47 SoS Committee 2014 Task Plan Proposed 2014 Tasks Deliverables/Products • Input and Feedback from TTCP • Regular committee exchanges Focus on new and emerging Service SoS Initiatives Joint meeting with SSE on SoS/SSE • SoS Webinar Series: SoS Engineering Collaborators Information Exchange (SoSECIE) • Feedback on inputs to TTCP work product • Presentations on SoS SE Committee Area on NDIA Website • Webinars slides posted on DASD SE site Schedule / Resources • Bi-Monthly committee exchanges • Bi-Weekly Webinars NDIA SE Division – Annual Planning Meeting December 11-12, 2013 Issues / Concerns • None TOC 48 Systems Security Engineering Committee Status and Plans December 2013 Holly Coulter Dunlap, Raytheon Beth Wilson, Raytheon Industry Co-Chairs NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 49 SSE Committee 2013 Status: NEW Activity Added Task Apr 2013: New SSE Committee Plans for 2013 Continue work of Systems Assurance Committee to follow up on May 2012 Program Protection Planning (PPP) workshop Status/Plans Kickoff held June 18, 2013 Committee renamed Systems Security Engineering (SSE) Committee NDIA SE Conference: SSE track, joint SSE/SoS track Progress on 5 priorities identified May 2012 Follow-on Workshop planned for May 2013 NDIA SE Division – Annual Planning Meeting December 11-12, 2013 Complete In Process TOC Cancelled 50 SSE Committee - 2014 Task Plan Projects Working Group Proposed 2014 Tasks: Deliverables/Products • PPP Implementation Workshop • Joint meetings with SED Committees • Developmental Test and Evaluation: Connections between PPP and cyber testing guidelines • Systems of Systems: PPP leverage points in the SoS Wave Model • Workshop Recommendations • NDIA SE Conference Progress Briefings • Comments on PPP related guidance Schedule / Resources Issues / Concerns: • PPP Workshop Apr/May • Joint meetings with SED Committees Jun/Aug • Developmental Test and Evaluation • Systems of Systems • Industry and government engagement NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 51 Summary of SSE Committee 2014 Plans SED SSE Topic Activity PPP Workshop 2014: Follow-on to 2012 Workshop Focus on Taxonomy and Metrics May 20-22: MITRE facility in McLean, VA Industry Inputs Comments on guideline documents Inputs into PPP implementation Systems of Systems 2014: PPP leverage points in the SoS Wave Model Developmental Test and Evaluation 2014: Cyber testing guidelines connections to Program Protection Planning Completed NDIA SE Division – Annual Planning Meeting December 11-12, 2013 Current Proposed TOC 52 2013 Systems Security Engineering • Restart Former Systems Assurance Committee • New Systems Security Engineering Committee • Kick-off June 18th • Track at SE Symposium • Planning follow-on workshop in 2014 on Program Protection Plan NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 53 2013 NDIA SE Conference Issue Short Title NDIA SE Conference Paper 1 Taxonomy 16290 – Critical Program Information Test Vector (Geoff “Ninja” Donatelli, Raytheon) 2 Metrics 16185 – Software Assurance and NDAA 2013: Software Code Quality Checking (John Keane DoD VA IPO, Vik Chauhan Deloitte Consulting) 3 Contracts and Acquisition Strategy 16223 – System Security Engineering and Comprehensive Program Protection (Melinda Reed, OSASD SE) 4 Threat and Attack Vectors 16051 – Engineering Your Software for Attacks (Bob Martin, Mitre) 16077 – Security Engineering in a Systems of Systems Environment (George Rebovich, Mitre) 16001 – Strategic Cybersecurity Threat Analysis Framework: Know Your Enemy to Defeat Your Enemy (Michele Myauo, Microsoft) 16111 – A Supply Chain Attack Framework to Support DoD Supply Chain Security Risk Management (Dr. John Miller, Mitre) 5 Education 16153 – A Practical Educational Approach to Program Protection Planning (Dr. Don Gelosh, Worcester Polytechnic Institute) NDIA SE Division – Annual Planning Meeting December 11-12, 2013 TOC 54
© Copyright 2024