Quantity:___________________________ Project:_____________________________ G24 Series Heavy Duty Gas Griddles Approval:___________________________ Date:_______________________________ Models: G24-24GFSD G24-36GFSD G24-48GFSD G24-60GFSD Standard Features: • Stainless steel front and sides • Full spatula width front grease trough • Large grease bucket holds 1-3/4 gallons (7.9 liters) • 3/4" (19mm) polished steel griddle plate with 2-5/8" (67mm) welded splash guards on both sides and rear • 4” (102mm) stainless steel legs • 24" (610mm) deep grilling surface Model G24-24GFSD • Piezo pilot spark ignition • Chrome plated thermostat guards • Total flame failure protection • G24-72GFSD Valve control and burner cast iron "H" style shape burner for every 12" (305mm) of griddle width. This delivers even and maximum heat distribution across the entire work surface. • 5 griddle widths available - 24" (610mm) through 72" (1829mm) • 3/4" N .P.T. regulator for 24" and 36" wide models and 1" N.P.T. regulator for 48",60" and 72" wide models. Optional Features: Stainless steel back Grooved griddle plate (in 12" sections) Note : Stands are available see form # CS24/CSD Specifications: Heavy duty gas griddles available in five (5) widths; 24", 36", 48", 60", and 72". High performance, high volume production with even, consistent, flame failure controlled valves. 3/4" (19mm) thick griddle plate, with 24" (610 mm) deep grilling surface. Valve control and burner for every 12” (305mm) width of griddle for maximum heat input on the plate surface. Garland Commercial Ranges Ltd. 1177 Kamato Road, Mississauga, Ontario L4W 1X4 CANADA General Inquiries 1-905-624-0260 USA Sales, Parts and Service 1-800-424-2411 Canadian Sales 1-888-442-7526 Canada or USA Parts/Service 1-800-427-6668 G24 Series Heavy Duty Gas Griddles Item: _______________________________ Model Description Controls Per Unit G24-24GFSD 24" (610 mm) Griddle 2 Hi-lo Valves G24-36GFSD 36" (914 mm) Griddle 3 Hi-lo Valves G24-48GFSD 48" (1219 mm) Griddle 4 Hi-lo Valves G24-60GFSD 60" (1524 mm) Griddle 5 Hi-lo Valves G24-72GFSD 72" (1829 mm) Griddle 6 Hi-lo Valves *Please refer to installation manual for more detail information BTU/HR Combustible Wall Clearances: In (mm) kW/HR Nat 61,400/54,600 Pro 61,400 18/16 18 Nat 92,150/81,900 Pro 92,150 27/34 27 Nat 122,850/109,200 Pro 122,850 36/32 36 Nat 153,500/136,500 Pro 153,500 45/40 45 Nat 184,250/163,750 Pro 184,250 54/48 54 Sides Back Base 6" (152) 6" (152) Non-combustible NOTE: Installation clearance reductions are applicable only where local codes permit. Garland products are not approved or authorized for home or residential use, but are intended for commercial applications only. Garland will not provide service, warranty, maintenance or support of any kind other than in commercial applications. Supply Operating Pressure Natural Gas Propane 7“WC (17.5 mbar) 11"WC (27.5 mbar) Manifold Operating Pressure Natural Gas Propane 4“WC (10 mbar) 10“WC (24 mbar) Note: For use with Natural & L.P Gas only Ratings shown are for natural gas installations up to 2000 feet (610m) above sea level. BTU input ratings must be derated for high altitude installations. Specify altitude of product if over 2000 feet (610m). W 3/4" NPT INLET (G24-24,G24-36) 1" NPT GAS INLET (G24-48,G24-60,G24-72) 6-3/4" (171mm) Model W G24-24GFSFD 24" (610 mm) G24-36GFSD G24-48GFSD *HEIGHT OF GRIDDLE PLATE G24-60GFSD 1-1/2" (38 mm) G24-72GFSD 13-7/8" (352 mm) 12-7/8" 10-1/4" * (327mm) (259mm) 4" (102mm) 30-3/8" (772mm) 48" (1219 mm) 60" (1524 mm) 72" (1829 mm) 1-1/2" (38mm) 3/4" NPT INLET (G24-24,G24-36) 1" NPT GAS INLET (G24-48,G24-60,G24-72) Garland Commercial Ranges Ltd. 1177 Kamato Road, Mississauga, Ontario L4W 1X4 CANADA 36" (914 mm) General Inquiries 1-905-624-0260 USA Sales, Parts and Service 1-800-424-2411 Canadian Sales 1-888-442-7526 Canada or USA Parts/Service 1-800-427-6668 Form# G24GFSD Series (01/27/15) G24 Series Heavy Duty Gas Griddles *Input Chart Natural (G20@20mbar / G25@25mbar) Propane Gas(G31@37/50mbar)
© Copyright 2024