GREENHOUSE VENTILATION
year
warranty
POLY-VENT®
With our Poly-Vent ventilation system you’ll have an economical alternative
to rack & pinion, and you’ll save in a host of other ways, too. Save on electrical
bills by reducing the use of large fans, save on heating costs because
Poly-Vent’s dead air space provides an effective layer of insulation,
and reduce your maintenance time with fewer moving parts. Able to
accommodate most greenhouse sidewalls, our system provides improved
water drainage. Choose from single-stage or two-stage options to
provide your product with superior ventilation and yourself with savings.
The winds of fortune are blowing in your direction.
Poly-Vent II 36" x 96' package
Full-Closed
Includes frame, Poly-Vent II, end package,
blowers and all hardware.
In the full-closed position,
cool air is prevented from
entering the greenhouse and
the dead air space acts as an
insulated wall.
$103900
FOB Castle Rock, MN
Poly-Vent III 48" x 96' package
Includes frame, Poly-Vent III, end package,
blowers and all hardware.
Mix and Match
For maximum sidewall
ventilation mix and match
single + two-stage stacked
systems to any height.
$1,25400
FOB Castle Rock, MN
Control Blowers
One or two long-lasting
squirrel-cage blowers operate
the ventilator regardless of length.
58
Full-Open
In the full-open position, Poly-Vent allows complete,
natural and free movement of outside air into the
greenhouse. There are no expensive fans or cooling
pads required.
For more information visit www.poly-tex.com
GREENHOUSE VENTILATION
Poly-Vent II (Single-stage)
Features
Base Frame Includes: Poly-Vent II, top and bottom 24 gauge galvanized Poly-Vent gutter,
galvanized front/rear guides and hardware.
Versatility: Most greenhouses with straight side
walls can easily be renovated to accommodate the
Poly-Vent system; it can also be used as a ridge vent
on most saw-tooth style greenhouses
Optional Stacking Frame Includes: Poly-Vent II, top and 24 gauge galvanized Poly-Vent gutter,
galvanized front/rear guides and hardware.
End Package Includes: Sheet metal enclosures for both ends of frame, one blower to inflate
Poly-Vent II, blower mount, one 3-inch diameter flex tube, air transfer gaskets and all hardware.
Base frame
Part #
PV7022
PV7032
PV7042
PV7052
Size
24"
36"
48"
60"
Price lineal ft.
$8.50
$9.00
$9.50
$10.50
Stacking frame (optional)
Part #
Price
PV7122
$6.75
PV7132
$7.75
PV7142
$8.75
PV7152
$9.75
Longer Life: Unlike more expensive systems,
End package
Part #
PV8022
PV8032
PV8042
PV8052
Poly-Vent has very few moving parts, so there is
less to wear out or break down
Price
$170.00
$175.00
$180.00
$190.00
Note: Frame must be purchased in two foot increments. Poly-Vent can be custom cut to any size.
Poly-Vent III (Two-stage)
Gradual Air Exposure: Poly-Vent opens slowly
from the top to gradually mix colder outer air with
warmer greenhouse air, preventing “cold air dump”
on fragile plants
Superior Insulation: The tubing air space provides
improved insulation compared to a single poly layer,
helping to reduce heating costs
Maximum Light Access: When fully open,
Poly-Vent allows your plants full access to sunlight
for superior growth
Base Frame Includes: Poly-Vent III, top and bottom 24 gauge galvanized Poly-Vent gutter,
galvanized front/rear guides and hardware.
Optional Stacking Frame Includes: Poly-Vent III, top 24 gauge galvanized Poly-Vent gutter,
galvanized front/rear guides and hardware.
End Package Includes: Sheet metal enclosures for both ends of frame, two blowers to inflate
Poly-Vent III, blower mounts, two 3-inch diameter flex tubes, air transfer gaskets and all hardware.
Base frame
Size
36"
48"
60"
Part #
PV7033
PV7043
PV7053
Stacking frame (optional)
Price lineal ft.
$9.50
$10.25
$11.25
Part #
PV7133
PV7143
PV7153
Price
$8.50
$9.25
$10.25
End package
Part #
PV8033
PV8043
PV8053
Price
$260.00
$270.00
$280.00
Note: Frame must be purchased in two foot increments. Poly-Vent can be custom cut to any size.
Replacement Poly-Vent Plastic
Size
24"
36"
48"
60"
Poly-Vent II part #
PV3500
PV3502
PV3504
PV3506
Poly-Vent III part #
–
PV3532
PV3534
PV3536
Price lineal ft.
$2.75
$3.50
$3.90
$4.95
The Best Thermostat
For Your System:
We recommend the Schaefer Mechanical
Thermostat for your Poly-Vent system.
This rugged thermostat is code approved
and moisture resistant to withstand the
greenhouse environment. It features a wide
temperature range and narrow operating
differential for reliable control.
Note: $15 cut charge if less than stock roll. $32 to cut and seal both ends
Poly-Vent Back-Up Blower System
The back-up blower system will keep your Poly-Vent system inflated in the unlikely event of a
power outage. Includes adapter plate, control box, DC blower, battery charger w/auto shut off.
(12 volt battery is not included.)
Part #
BUBSII
BUBSIII
Description
Poly-Vent II back-up blower system
Poly-Vent III back-up blower system
Price
$250.00
$375.00
One-speed
heating or cooling
RR5003 – $75.00
Two-stage
heating or cooling
RR5010 – $150.00
Replacement Parts
Flex Tubing
Poly-Vent Blower
Blower Mounting Bracket
Air Transfer Gasket
PT2448 – $89.00
PT2409 – $15.00
PT2436 – $0.95
3”x 5’ PT2437 – $15.00
3”x 2’ PT2443 – $10.00
3”x 25’ PT2438 – $70.00
59
Please call 800-852-3443 for additional sizes and configurations.
GREENHOUSE VENTILATION
VENTILATION SYSTEMS
Fiberglass Flush-Mount Exhaust Fans
Revolutionary tapered design has no corners to block air or collect dirt and dust. Housing is constructed
of molded fiberglass that carries a lifetime guarantee. One-time balancing of propellers ensures peak
performance for greater efficiency. Includes pre-installed aluminum shutter.
36” Single Speed 9,610 CFM* direct drive, 115/230, 3-wing galvanized blade (FFM363GD12) – $1,100.00
48” Single Speed 17,800 CFM* belt drive, 115/230, 3-wing galvanized blade (FFM483G1) – $1,650.00
48” Two-Speed 20,570/13,419 CFM* belt drive, 230, 5-wing galvanized blade (FFM485G1-2) – $1,990.00
Schaefer Shutter Motor
Heavy Duty Air Inlet Shutters
These heavy duty aluminum shutters provide
fresh air intake opposite your exhaust fans.
39” Inlet Shutter for 36” fan (WS-390) – $185.00
45” Inlet Shutter for 42” fan (WS-450) – $223.00
51” Inlet Shutter for 48” fan (WS-510) – $264.00
This motor can be used on all the
heav y-dut y shut ters listed on
the left. Features 115/230v, sturdy
die cast case, U.L. approved,
precision gears and a dust proof
case. Includes hardware.
Shutter Motor (RR5004) – $119.00
48” and under
Shutter Motor (RR5044) – $179.00
50” and larger
Small
Medium
60 feet or less
over 60 feet
Gutter Connect
Gutter Connect
60 feet or less
over 60 feet
Schaefer Plant Air® HAF Circulation Fan
Use these circulation fans to implement Horizontal Air Flow (HAF) patterns
throughout the greenhouse. The HAF system places small circulation fans
strategically in the greenhouse creating a ‘race-track’ air flow pattern. This
reduces humidity and moisture condensation, improves carbon dioxide
availability and equalizes temperature. The Plant Air fan is no-maintenance.
The totally enclosed motor never needs oiling and uses heavy-duty moisture
resistant bearings for long-life.
Large Gutter Connect
12” Plant Air HAF Fan (VK12) – $159.00
• Gentle Air Movement– ideal fan for any crop in any greenhouse
• Quiet– only 4.5 sones provide a quiet production or retail environment
• Small Size – easy placement, better clearance
• Maintenance Free–motor never needs oiling
60
over 120 feet
Suggested placement of Schaefer Plant Air circulation fans in single and
multiple greenhouses
For more information visit www.poly-tex.com
GREENHOUSE HEATING
UNIT
HEATERS
Ultra-Efficient & Power Vented
Therma Grow™ Greenhouse Heaters
Reznor® V3® Series Model UDAP power
vented, low static axial fan unit heaters
The Therma Grow’s patent-pending design combines advanced
performance and superior fuel efficiency to reduce energy costs and
grow profits. Unlike conventional vented heaters that exhaust 20% of
heated air straight out the stack, the Therma Grow converts 99+% of its
fuel into clean heat energy. So you get more heated air into the house
per fuel dollar. Available in either LP or natural gas.
• Power venting
• 14 models from 30,000–400,000 BTU
• New T-core2® titanium stabilized aluminized steel heat exchanger
• New T-core2® single burner combustion system in a one-piece
burner assembly
• 82–84% Thermal efficient—tops in its class!
• Natural or propane single-stage gas valve
• Multi-try direct ignition
• 115/1/60 supply voltage
• Integrated circuit board with diagnostic indicator lights
• Designed for low noise operation
• Certified for commercial/industrial heating application
Description
Therma Grow Plus models offer several additional features for
even greater fuel efficiency, including:
• Two-stage temperature control
• Heating and air circulation modes
• Tri-Shield triple coated protection against case corrosion
BTU
Part #
Price
BTU
Part #
Price
UDAP-30 natural gas heater
30,000
FUR3001
$842.00
Therma Grow 120 LP Heater
120,000
FUR3100
Call for Pricing
UDAP-45 natural gas heater
45,000
FUR3002
$876.00
Therma Grow 120 Natural Gas Heater
120,000
FUR3101
Call for Pricing
UDAP-60 natural gas heater
60,000
FUR3003
$923.00
Therma Grow 220 LP Heater
220,000
FUR3102
Call for Pricing
UDAP-75 natural gas heater
75,000
FUR3004
$967.00
Therma Grow 220 Natural Gas Heater
220,000
FUR3103
Call for Pricing
UDAP-100 natural gas heater
100,000
FUR3005
$1,106.00
UDAP-125 natural gas heater
125,000
FUR3006
$1,246.00
Therma Grow 120 Plus LP Heater
120,000
FUR3104
Call for Pricing
UDAP-150 natural gas heater
150,000
FUR3007
$1,328.00
Therma Grow 120 Plus Natural Gas Heater
120,000
FUR3105
Call for Pricing
UDAP-175 natural gas heater
175,000
FUR3008
$1,475.00
Therma Grow 220 Plus LP Heater
220,000
FUR3106
Call for Pricing
Therma Grow 220 Plus Natural Gas Heater
220,000
FUR3107
Call for Pricing
UDAP-200 natural gas heater
200,000
FUR3009
$1,580.00
UDAP-225 natural gas heater
225,000
FUR3010
$1,707.00
UDAP-250 natural gas heater
250,000
FUR3011
$1,837.00
UDAP-300 natural gas heater
300,000
FUR3012
$2,197.00
UDAP-350 natural gas heater
350,000
FUR3013
$2,494.00
UDAP-400 natural gas heater
400,000
FUR3014
$2,684.00
LP Kit for Reznor UDAP and UDAS unit heaters
Description
Part #
Price
LP Kit for UDAP 30–45
FUR3030
$64.00
LP Kit for UDAP 60–75
FUR3031
$86.00
LP Kit for UDAP 100–125
FUR3032
$84.00
LP Kit for UDAP 150–175
FUR3033
$86.00
LP Kit for UDAP 200–250
FUR3034
$92.00
LP Kit for UDAP 300–400
FUR3035
$92.00
Description
Please specify LP or natural gas and 115 or 230 voltage when ordering.
Visit poly-tex.com for additional information and accessories.
L.B. White Thermostat
The L.B. White single-stage thermostat
provides a wide temperature range in a
code approved, moisture-proof enclosure.
Stainless steel sensor will stand up in
the tough greenhouse environment.
FUR3120 – Call
for Pricing
Please specify LP or natural gas when ordering.
Visit poly-tex.com for additional information and accessories.
Please call 800-852-3443 for additional sizes and configurations.
61