Download Report

Wheel loader
ATTACHMENTS
A Doosan Company
No. 1088, Xincheng Street. Muping Economic Developing Zone
Yantai Shandong 264100 China
Tel : +86-535-638-2000 Fax : +86-535-638-2004
Materials and Specifications in the catalogue are subject to change without notice.
MAXIMIZE YOUR DISD WITH
OPTIMIZED ATTACHMENTS
Believable Quality,
Excellent Performance!
BUCKETS
6 GOOD REASONS FOR
BUYING DISD ATTACHMENTS
MATERIAL HANDLING ATTACHMENTS
CLEARING ATTACHMENTS
QUICK COUPLER
FORKS
ANGLE BLADE
ANGLE BROOM
increases machine performance, multiplying the
productivity of your machine.
Pallet Fork has an open frame
design and offset tines for
maximum visibility to the tines at
working heights.
useful work tool in a wide range of applications for
moving dirt, gravel, livestock waste and snow. They are
also useful for finish grade work in construction and
landscaping.
is ideal for clearing parking lots, industrial plants, mill
yards, airport runways, streets, driveways and lanes.
Hydraulic angling broom includes water sprinkler system
complete with piping, sprinkler heads, hoses, 400L tank
and electronically operated pump for effective dust control.
Pin-on Tooth
GENERAL PURPOSE BUCKET
Mono Tooth
is the perfect bucket for daily using with a sloped bottom for maximum
filling and material retention. Pin-on Tooth type is for General
Excavating and Loading, of Natural ground and Construction materials.
Blade type is for Loading and Stockpiling, of Low density materials like
Livestock Feed, Fertilizer, Snow, Sawdust. Mono Tooth type is One
piece structure to preventing tooth tip from being separated and falling
into crusher which may cause damage to crusher.
Marble Fork wider than pallet
forks, designed for heavy duty
applications. Fork tines can be
configured to allow tines to either
swing or stay in a fixed position.
Blade type
Configuration
SD300/N, SD310
Unit
Tooth type
Mono Tooth
Capacity
Width
Bucket Linkage
Tooth Type (GET Type)
Quantity of Tips
Weight
m
mm
kg
3
2.7
2992
Pin-on
Mono
7
1205
SD200/N
Blade type
Tooth type
Pin-on Tooth
3
2992
Pin-on
Mono
7
1251
3
2998
Pin-on
Adaptor
7
1325
Mono Tooth
2.9
2944
Pin-on
(Bolt-on edge)
1341
3.2
2944
Pin-on
(Bolt-on edge)
1378
1.7
2496
Pin-on
Mono
7
740.4
1.9
2496
Pin-on
Mono
7
806.8
Configuration
Model Name
Unit
SD300/N, SD310
SDQC30
Weight
Overall Length
Overall Width
Overall Height
Hyd. Pressure
kg
mm
mm
mm
MPa
310
470
1310
760
16~25
SD200/N
SDQC20
Configuration
Unit
Model Name
221
385
1124
745
16~25
SD300/N, SD310
SD200/N
Pallet fork Marble fork Pallet fork
SDFP30
SDFM30
SDFP20
Tine Length
Overall Length
Carriage Width
Carriage Height
Outside Tine Width
mm
mm
mm
mm
1780
2330
1900
1117
1450
1936
514
820
1070
1435
1560
817
mm
1800
1235
1401
BY PURPOSE
Outside Tine Width
mm
456
-
361
Light Material Bucket is the largest capacity buckets built for
tele-handlers. They are specially designed for efficiency in loading light,
loosely packed materials, such as coal, mulch, hay, fertilizer and snow.
Tine Thickness
Tine Width (single tine)
Linkage Type
Net Weight
mm
mm
kg
70
150
Pin-on
830
100
200
Pin-on
1396.5
45
105
Pin-on
350
(max spread)
(min spread)
Rock Bucket is designed for face or bank loading in mining or quarry
applications. The straight-edge rock bucket provides higher breakout
force and increased dump clearance. The spade-edge rock bucket
offers increased penetration in certain applications.
GRAPPLES
General Purpose
Side Dump Bucket can both dump forward as a standard bucket, or
dump to the side. This functionality makes it uniquely suited to work in
urban areas, small job sites, or other congested work environments.
Configuration
Unit
Model Name
SD300/N, SD310
Unit
Light material
Capacity
Width
Bucket Linkage
Tooth Type (GET Type)
Quantity of Tips
Weight
m3
mm
kg
4
3092
Pin-on
1450
Rock
2.7
2978
Pin-on
Adaptor
8
1610
Side dump
2.2
2960
Pin-on
2665
SD200/N
Multi-Purpose
1.7
2944
Pin-on
Bolt-on Tooth
1685
Light material
2.2
2506
Pin-on
808
Multi-Purpose
1.2
2486
Pin-on
Bolt-on Tooth
1165
Overall Length
Overall Width
Overall Height
Min. Hold Diameter
Closed Diameter
Max. Clamp Opening
Working Pressure
Linkage Type
Weight
mm
mm
mm
mm
mm
mm
MPa
kg
SD300/N, SD310
Log & Lumber
Grass
SDGL30-T
SDGG30
1869
2300
1460
565
875
1800
16~25
Pin-on
1396
1766
2887
1572
2241
16~25
Pin-on
1515
Unit SD300/N, SD310
SD200/N
SDBL30 SDBL30-E SDBL20 SDBL20-E
Angle Control Type
Overall Length
Overall Width
Working width
Hydraulic Electric
mm 1680
1680
mm 3600
3600
Hydraulic Electric
1680
1680
2500
2500
mm 2100
2100
2150
2150
30
30
30
1227
Overall Height
mm 1230
20
Cutting edge thickness mm 20
Hyd. Flow Range
L/Min 120~200 24V
(Working Voltage)
1230
20
1230
20
Hyd. Pressure Range MPa 16~24
Pin-on
Linkage Type
kg 1215
Weight
16~24
Pin-on
1060
(fully angled)
Maximum blade angle
(right/left of center)
SD200/N
Log & Lumber
SDGL20-G
SDGL20-T
1460
1660
1450
430
970
1700
16.5
Pin-on
959
1523
2292
1387
635
760
1500
16~25
Pin-on
800
Grass
SDGG20
1800
2362
1531
2241
16~25
Pin-on
1425
30
o
Pin-on
1215
120~200 24V
Pin-on
1060
Configuration
Model Name
Unit SD300/N, SD310
SDBR30
SD200/N
SDBR20
Sweeping Width Straight
Sweeping Width Angled
Sweeping Angle
Brush Diameter
Hyd. Flow Range
Hyd. Pressure Range
Overall Width Straight
Overall Width Angled
Water System (Y/N)
Linkage Type
Weight
mm
mm
3000
2600
30
800
140~200
16~24
3848
3332
N
Pin-on
1133
o
mm
L/Min
MPa
mm
mm
kg
3600
3110
30
800
140~200
16~24
4448
3952
N
Pin-on
1232
SNOW BLOWER
VIBRATORY ICE BREAKER
is ideal for efficiently removing snow from streets, parking
lots, driveways and sidewalks.
vibration roller blade not directly contact with the ground,
won’t produce any damage to the road.
Single Shaft
type
Grass Grapple unloading grapple uploads trucks, stack and
sort timber at the mill. Tine and clamp design permit quick and
gentle loading. Forks are available with a kick-out that unloads
the fork even at full lift, enabling higher lumber stacking.
Multi-Purpose Bucket (4-in-1 bucket) has a unique four-way action
that can load, strip topsoil, bull doze, clamp pipe or large chunks of
concrete, clean up debris, and many other tasks.
Configuration
Tropical Timber Type
Log & Lumber Grapple utilizes flat fork tines and a raised back.
In the forestry industry, log and lumber grapples are used to load,
unload, move, deck, sort and feed the mill. Their flat tines and
raised back are designed specifically for use in handling both
unfinished logs and stacked lumber.
Configuration
Model Name
Dual Shaft
type
One-stop shop : One
place for complete
solutions : (carrier +
attachments + parts)
2
Self-Powered
type
Configuration
Model Name
Unit SD200/N, SD300/N, SD310 SD300/N, SD310
SDSB20 SDSB30-D SDSB30-P
Configuration
Model Name
Unit SD300/N, SD310
SDIB30
Overall Length
Overall Width
Overall Height
Throw Distance
Intake Height
Auger Diameter
Auger Quantity
Snowfall
Hydraulic Flow
Hydraulic Pressure
Range
Independent power
mm
mm
mm
m
mm
mm
Ton/hr
L/Min
1193
2620
2470
10
885
440
1
10
160
1195
2430
1887
15
990
340
2
400
200
2500
2400
3800
35
1300
760
1
800
200
Weight
Overall Length
Overall Width
Overall Height
Hyd. Pressure
kg
mm
mm
mm
MPa
MPa
16~21
16~21
16~21
-
N
N
165HP
Weight
kg
800
925
3170
(Y/N)
1
1708
1503
2370
860
16~22
Engineering approved
: Optimized for
DISD equipment
high efficiency and
performance, resulting
in lower running and
maintenance cost.
3
Service : Broad
coverage
via the DISD
service
network, fully
supported by
DISD product
specialists.
SD200/N
SDIB20
1708
1448
2370
860
16~22
4
6
Quality : Products
manufactured to
highest standards.
5
Warranty : Avoid compatibility issues and
operating differences from using Non-approved
attachments.
Plug & Play readiness : Easy to install and operate.