1. No category

Swivel angle sensor
RE 30268 Edition: 2015-01
Replaces: 2013-04
Type BAUSATZ VT-SWA-1
▶▶ Component series 1X
▶▶ Suitable for use in SYDFEE, SYDFEC, SYDFED and
SYDFEn systems (systems with integrated electronics)
for measuring the swivel angle of the pump
A10V(S)O…DFE… and converting the measured value
into an electric signal
H20559 (similar figure)
Features
Contents
▶▶ Contactless measurement of a swivel angle using
a Hall effect sensor
▶▶ Consisting of magnetic holder and sensor with
integrated electronics in the housing
Features1
Contents1
Ordering code
2
Technical data
3
Block diagram / pin assignment
4
Output characteristic curve
4
Dimensions
5 ... 6
Further information
6
RE 30268, edition: 2015-01, Bosch Rexroth AG
2/6
BAUSATZ VT-SWA-1 | Swivel angle sensor
Ordering code
01
BAUSATZ VT-SWA-1-1X/SYDFEE
/
02
03
18...140
*
01
Swivel angle sensor for SYDFEE, SYDFEC and SYDFEn systems with integrated electronics (complete assembly kit with sensor and evaluation electronics, magnetic holder and built-in parts)
02
Suitable for all sizes 18 to 180 of pump A10V(S)O..DFE.
03
Further details in the plain text
BAUSATZ VT-SWA-1-1X/SYDFEE
18 ... 140
*
Material no.: R900868651
01
BAUSATZ VT-SWA-1-1X/DFEE-G15
02
/
*
01
Swivel angle sensor for SYDFED systems with integrated electronics (complete assembly kit with
sensor and evaluation electronics, magnetic holder and built-in parts); suitable for all sizes 18 to
180 of pump A10V(S)O..DFE.
02
Further details in the plain text
Material no.: R901396459
Bosch Rexroth AG, RE 30268, edition: 2015-01
Bausatz VT-SWA-1-1X/DFEE-G15
*
Swivel angle sensor | BAUSATZ VT-SWA-1 3/6
Technical data
(For applications outside these parameters, please consult us!)
Bausatz VT-SWA-1-1X/SYDFEE / 18…140
Operating voltage
UB –10.0 V
(reference voltage from the integrated
electronics of the control system)
Bausatz VT-SWA-1-1X/DFEE-G15
15.0 V
Tolerance: min. 13 V, max. 24 V
Current consumption
I
Approx. 25 mA
Measurement range
α
±18 °
Output signal
U –8 V ... –2 V
2 V ... 8 V
Temperature drift:
–Zero point
< 0,2 %/10 K
–Range
< 0,2 %/10 K
< 0,2 %/10 K
Electric connection
G4A5M connector for G4W1F mating
connector
Connection cable with M12 line
connector
Protection class
< 0,2 %/10 K
IP 65 according to EN 60529
Housing material
GD-ZnAl4Cu1
Adm. ambient temperature range
ϑ
0 ... +60 °C
Storage temperature range
ϑ
0 ... +70 °C
Weight
m 0.3 kg
0.4 kg
Notice:
For information on the environment simulation testing for the
areas EMC (electromagnetic compatibility), climate and mechanical load, see data sheet 30030-U.
RE 30268, edition: 2015-01, Bosch Rexroth AG
4/6
BAUSATZ VT-SWA-1 | Swivel angle sensor
Block diagram / pin assignment
Bausatz VT-SWA-1-1X/SYDFEE / 18…140 –10 V
GND
3
GND
1
5
4
4
UA = –8 V ... –2 V
Bausatz VT-SWA-1-1X/DFEE-G15 Magnetic
field sensor
U
2
U
B
15 V
UA = 2 V … 8 V
1
Magnetic
field sensor
U
2
U
B
Notice:
The VT-SWA-1-1X/DFEE-G15 swivel angle sensor is only to be
operated on an SY(H)DFED system. During independent operation, reversed polarity of the pins leads to destruction of the
VT-SWA-1-1x/DFEE-G15 swivel angle sensor.
Output characteristic curve
Bausatz VT-SWA-1-1X/SYDFEE / 18…140 Bausatz VT-SWA-1-1X/DFEE-G15 ← Angle in degree →
0
–2
–5
–8
Bosch Rexroth AG, RE 30268, edition: 2015-01
+18 °
–18 °
← Output voltage in V
← Output voltage in V
–18 °
← Angle in degree →
0
+8
+5
+2
+18 °
Swivel angle sensor | BAUSATZ VT-SWA-1 5/6
Dimensions
(dimensions in mm)
Bausatz VT-SWA-1-1X/SYDFEE / 18…140 2
3
1
4
G
59
2
1
O
4
5,4
45
58
40
50
G
Setting of maximum swivel angle (–2 V)
0
Zero point setting of the swivel angle (–5 V)
8
15
Space required for removing the
mating connector
Bausatz VT-SWA-1-1X/DFEE-G15 1
G
58
O
45
2
4
59
5,4
35
45
12
100
Required space for the connection
cable bending radius
RE 30268, edition: 2015-01, Bosch Rexroth AG
BAUSATZ VT-SWA-1 | Swivel angle sensor
6/6
Dimensions
Installation example
Installation position of the magnetic holder (A – A)
2
Drive shaft
1
S
A
S
+
–
Angle α
1
A
N
N
4
5
6
3
4
1
Hexagon socket head cap screw with internal hexagon M6 x 35
with washer (mounting bolts, 2 units; included in the scope
of delivery)
Tightening torque MA = 9 Nm
2
Bolt with external hexagon SW8
(cover fastening, 2 units)
3
Countersunk screw with internal hexagon M6 x 12
(included in the scope of delivery)
Tightening torque MA = 9 Nm
4
Guide pin for housing
5
Locating pin for magnetic holder (for pumps which are clockwise)
6
O-ring 31.47 x 1.78-N-FKM80 (included in the scope of delivery)
Further information
Notice:
For calibration see the operating instructions of the respective
control system:
Control system
Operating instruction
SY(H)DFEE
30012-B
SY(H)DFEC
30027-B
SY(H)DFEn
30014-B
SY(H)DFED
30017-B
Installation and calibration
of SYDFE. systems with
integrated electronics
30268-R
Bosch Rexroth AG
Hydraulics
Zum Eisengießer 1
97816 Lohr am Main, Germany
Phone +49 (0) 93 52 / 18-0
[email protected]
www.boschrexroth.de
Bosch Rexroth AG, RE 30268, edition: 2015-01
© This document, as well as the data, specifications and other information set
forth in it, are the exclusive property of Bosch Rexroth AG. It may not be
reproduced or given to third parties without its consent.
The data specified above only serve to describe the product. No statements
concerning a certain condition or suitability for a certain application can be
derived from our information. The information given does not release the user
from the obligation of own judgment and verification.
It must be remembered that our products are subject to a natural process of
wear and aging.
Swivel angle sensor | BAUSATZ VT-SWA-1 7/6
Notes
Bosch Rexroth AG
Hydraulics
Zum Eisengießer 1
97816 Lohr am Main, Germany
Phone +49 (0) 93 52 / 18-0
[email protected]
www.boschrexroth.de
© This document, as well as the data, specifications and other information set
forth in it, are the exclusive property of Bosch Rexroth AG. It may not be
reproduced or given to third parties without its consent.
The data specified above only serve to describe the product. No statements
concerning a certain condition or suitability for a certain application can be
derived from our information. The information given does not release the user
from the obligation of own judgment and verification.
It must be remembered that our products are subject to a natural process of
wear and aging.
RE 30268, edition: 2015-01, Bosch Rexroth AG
8/6
BAUSATZ VT-SWA-1 | Swivel angle sensor
Notes
Bosch Rexroth AG
Hydraulics
Zum Eisengießer 1
97816 Lohr am Main, Germany
Phone +49 (0) 93 52 / 18-0
[email protected]
www.boschrexroth.de
Bosch Rexroth AG, RE 30268, edition: 2015-01
© This document, as well as the data, specifications and other information set
forth in it, are the exclusive property of Bosch Rexroth AG. It may not be
reproduced or given to third parties without its consent.
The data specified above only serve to describe the product. No statements
concerning a certain condition or suitability for a certain application can be
derived from our information. The information given does not release the user
from the obligation of own judgment and verification.
It must be remembered that our products are subject to a natural process of
wear and aging.