1. No category

 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D‐PL‐11339‐01‐00 according to ISO/IEC 17025:2005 Period of validity: 04.02.2015 to 16.07.2017 Date of issue: 04.02.2015
Holder of certificate: International Testing Centre Footwear Design and Development Institute FDDI Ministry of Commerce, Govt. of India Chemical and Physical Laboratories with the locations ‐
‐
A 10 A Sector 24, 201301 NOIDA, INDIA Plot No. PB‐13, Footwear Component Park, 7th Main Road, SIPCOT Industrial Park, Irungattukottal Sriperumbudur Taluk, Kancheepuram Dist, Tamil Nadu, INDIA Tests in the fields: selected physical, mechanical and chemical testing of footwear, footwear components and aliened materials abbreviations used: see last page The testing methods are marked with the following symbols for the sites at which they are performed: N = Noida CH = Chennai 1/13
Annex to the accreditation certificate D‐PL‐11339‐01‐00 1 Chemical testing of footwear, footwear components and aliened materials ISO 17070 Leather ‐ Chemical tests ‐ Determination of pentachlorophenol N
2006‐10 content ISO 17234‐1 Leather ‐ Chemical tests for the determination of certain azo N
2010‐02 colorants in dyed leathers ‐ Part 1: Determination of certain aromatic amines derived from azo colorants DIN EN 14362‐2 EN‐Textiles ‐ Methods for determination of certain aromatic N
2003‐12 amines derived from azo colorants ‐ Part 2: Detection of the use Correction 1 of certain azo colorants accessible by extracting the fibres 2005‐06 (withdrawn standard, replaced by DIN EN 14362‐01) DIN EN 14362‐1 Textiles ‐ Methods for determination of certain aromatic amines N
2012‐04 derived from azo colorants ‐ Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres ISO 17226‐1 Leather ‐ Chemical determination of formaldehyde content ‐
N
2008‐05 Part 1: Method using high performance liquid chromatography E DIN EN 12471 Fast test for determination of nickel release from alloy N
1996‐06 (withdrawn standard) BS EN ISO 17075 Leather ‐ Chemical tests ‐ Determination of chromium(VI) N, CH
2007‐12 content DIN EN ISO 4048 Leather ‐ Chemical tests ‐ Determination of matter soluble in N
2008‐05 dichloromethane and free fatty acid content DIN EN ISO 4098 Leather ‐ Chemical tests ‐ Determination of water‐soluble matter, N
2006‐04 water soluble inorganic matter and water‐soluble organic matter DIN EN ISO 4045 Leather ‐ Chemical tests ‐ Determination of pH N, CH
2008‐05 DIN EN ISO 3071 Textiles ‐ Determination of pH of aqueous extract N
2006‐05 ISO 5398‐1 Leather ‐ Chemical determination of chromic oxide content ‐
N
2007‐08 Part 1: Quantification by titration ISO 4684 Leather ‐ Chemical tests ‐ Determination of volatile matter
N
2005‐11 Period of validity: 04.02.2015 to 16.07.2017
Date of issue: 04.02.2015 2/13
Annex to the accreditation certificate D‐PL‐11339‐01‐00 SATRA CM 48 1994‐06 SATRA TM 349 1996‐01 SATRA TM 353 1999‐03 SATRA TM 329 1995‐09 SATRA TM 345 1996‐08 SATRA TM 346 1994‐06 SATRA TM 347 1996‐01 SATRA TM 348 1996‐01 IS 582 1970 Ash and chromic oxide content of leather
Acidity ‐ pH‐value and pH difference figure of an aqueous extract N
Ash content of polymeric materials
N
Water soluble matter content of leather
N
Solvent soluble matter in polymeric materials N
Fat and free fatty acids contents of leather
N
Volatile matter content
N
Ash and Chromic oxide content of leather
N
Methods of chemical testing of leather
N
• LC:1 Determination of volatile matter • LC:3 Determination of total ash • LC:4 Determination of solvent extractable substances • LC:6 Determination of water soluble matter • LC:7 Determination of sulphated ash of water solubles
• LC:8 Determination of water insoluble ash • LC:10 Determination of chromic oxide content • LC:18 Determination of pH and difference figure of water soluble matter Physical and mechanical testing of footwear, footwear components and aliened materials 2 ISO 20344 2011‐12 Personal protective equipment ‐ Test methods for footwear
N
5 5.1 5.2 5.3 N, CH
N, CH
N, CH
Period of validity: 04.02.2015 to 16.07.2017
Date of issue: 04.02.2015 N
Whole Footwear
Specific ergonomic features
Upper to outsole interlayer bond strength Internal toe cap length
3/13
Annex to the accreditation certificate D‐PL‐11339‐01‐00 5.4 5.5 5.6 5.7 5.8 5.10 5.11 5.12 5.13 5.14 5.15 6 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 6.10 6.11 6.12 6.13 6.14 7 7.1 6.9 7.2 7.3 8 8.1 8.2 8.3 8.4 8.5 8.6 8.7 Period of validity: 04.02.2015 to 16.07.2017
Date of issue: 04.02.2015 Impact resistance
Compression resistance
Corrosion resistance of metallic toecaps or penetration‐
resistant metallic inserts Leakproofness
Dimensional conformity and penetration resistance of inserts Electrical resistance
Determination of footwear slip resistance Insulation against heat
Insulation against cold
Energy absorption of seat region
Water resistance
N
N N
N
N
N
Upper Lining and Tongue Thickness
Height of the upper
Tear strength
Tensile properties
Flexing resistance
Water vapour permeability
Water vapour absorption
Water vapour coefficient
pH Value
Hydrolysis
Chromium VI content
Abrasion resistance of lining
Water penetration and water absorption Cut resistance
N, CH
N, CH
N, CH
N, CH
N, CH
N, CH
N, CH
N, CH
N, CH
N, CH
N, CH
N, CH
N, CH
N
Insole and Insock
Thickness of insole
pH Value
Water absorption and desorption
Abrasion resistance of insole
N, CH
N, CH
N
N, CH
Outsole
Thickness
Tear strength
Abrasion resistance
Flexing resistance
Hydrolysis
Resistance to fuel oil
Resistance to hot contact
N
N
N, CH
N
N
N, CH
N, CH
N, CH
N, CH
N, CH
N, CH
N, CH
4/13
Annex to the accreditation certificate D‐PL‐11339‐01‐00 ISO 20345 2011‐12 ISO 20346 2004‐08 ISO 20347 2012‐02 BS EN 15090 2012‐02 AS/NZS 4821 2006 ISO 34‐1 2010‐09 ISO 37 2011‐12 ISO 105‐B02 2014‐09 ISO 3376 2011‐12 ISO 3377‐1 2011‐12 ISO 11640 2012‐11 ISO 11641 2012‐11 ISO 11642 2012‐11 ISO 11643 2009‐05 Personal protective equipment ‐ Safety footwear N, CH
Personal protective equipment ‐ Protective footwear N
Personal protective equipment ‐ Occupational footwear N
Footwear for Fire‐fighter
N
Exept: Clause 6.3.2 (Radiant Heat), Clause 6.3.3 (Flame Resistance)
Protective Footwear for Fire‐fighter
N
Exept: Clause 3.5.2 (Radiant Heat), Clause 3.5.3 (Flame Resistance),
Clause 3.2 (Lace Melting), Clause 3.10 (Microorganism Resistance)
Rubber, vulcanized or thermoplastic ‐ Determination of tear N, CH
strength ‐ Part 1: Trouser, angle and crescent test pieces Rubber, vulcanized or thermoplastic ‐ Determination of tensile N
stress‐strain properties Textiles ‐ Tests for colour fastness ‐ Part B02: Colour fastness to N
artificial light: Xenon arc fading lamp test Leather ‐ Physical and mechanical tests ‐ Determination of tensile N, CH
strength and percentage extension Leather ‐ Physical and mechanical tests ‐ Determination of tear N
load ‐ Part 1: Single edge tearDetermination of tear load N
Leather ‐ Tests for colour fastness - Colour fastness to cycles of to‐and‐fro rubbing N
Leather ‐ Tests for colour fastness - Colour fastness to perspira‐
tion Leather ‐ Tests for colour fastness ‐ Colour fastness to water
N
Leather ‐ Tests for colour fastness ‐ Colour fastness of small samples to solvents Period of validity: 04.02.2015 to 16.07.2017
Date of issue: 04.02.2015 N
5/13
Annex to the accreditation certificate D‐PL‐11339‐01‐00 ISO 3377‐2 2002‐12 Leather ‐ Physical and mechanical tests ‐ Determination of tear load ‐ Part 2: Double edge tear in connection with:
EN 388 2003 EN 12568
2010 EN 50321
1999 ISO 868
2003‐03 ISO 3696
1991‐06 ISO 3376
2011‐12 ISO 3377‐2
2011‐12 ISO 4044
1977‐09 ISO 4045
2008‐02 ISO 4674‐1
2003‐09 ISO 17249
2004‐09 ISO 1817
2011‐09 ISO 2023
1994‐12 ISO 3290‐1
2008‐12 Period of validity: 04.02.2015 to 16.07.2017
Date of issue: 04.02.2015 N, CH
Protective gloves against mechanical risks
N
Foot and leg protectors ‐ Require‐ments and test methods for toecaps and metal penetration resistant inserts Electrically insulating footwear for working on low voltage installations Plastics & ebonite ‐ Determination of indentation hardness by means of a durometer (Shore hard‐
ness) Water for analytical laboratory use ‐Specification and test methods Leather ‐ Physical and mechanical tests ‐ Deter‐
mination of tensile strength and percentage extension Leather ‐ Physical and mechanical tests ‐ Deter‐
mination of tear load ‐ Part 2: Double edge tear Leather ‐ Preparation of chemical test samples
N
N
N
N
N
N, CH
N
N, CH
Leather ‐ Determination of pH Rubber‐ or plastics‐coated fabrics ‐ Determination N, CH
of tear resistance ‐ Part 1: Constant rate of tear methods Safety footwear with resistance to chain saw N
cutting Rubber, vulcanized ‐ Determination of the effect of liquids N, CH
Rubber footwear ‐ Lined industrial vulcanized rubber boots ‐ Specification N
Rolling bearings ‐ Balls ‐ Dimensions and toleran‐
ces N
6/13
Annex to the accreditation certificate D‐PL‐11339‐01‐00 ISO 4643
1992‐02 ISO 4648
1991 ISO 4649
2010‐09 ISO 5423
1992‐02 ISO 13287 2006‐02 Moulded plastic footwear ‐ Lined or unlined poly
(vinyl chloride) boots for general industrial use ‐ Specification Rubber, vulcanized or thermoplastic ‐ Determina‐
tion of dimensions of test pieces and products for test purposes (withdrawn standard) Rubber, vulcanized or thermoplastic ‐ Determina‐
tion of abrasion resistance usinga rotating cylin‐
drical drum device Moulded plastic footwear ‐ Lined or unlined poly‐
urethane boots for general industrial use ‐ Speci‐
fication Personal protective equipment ‐ Footwear ‐ Test method for slip resistance N, CH
N
N, CH
N, CH
N
3 SATRA Test Methods SATRA TM1 2004‐11 SATRA TM2 1995‐05 SATRA TM3 1999‐03 SATRA TM8 2004‐06 SATRA TM24 1992‐04 SATRA TM27 2004‐04 SATRA TM28 1994‐07 Thickness of leather and insole materials
N, CH
Tensile properties of insole materials
N
Flexing index
N, CH
Colour fastness to circular rubbing
N, CH
Lastometer ball burst test
N, CH
Thickness of non‐leather flexible sheet materials N
Mass per unit area
N
Period of validity: 04.02.2015 to 16.07.2017
Date of issue: 04.02.2015 7/13
Annex to the accreditation certificate D‐PL‐11339‐01‐00 SATRA TM29 1992‐11 SATRA TM30 1995‐09 SATRA TM31 2003‐04 SATRA TM37 1999‐05 SATRA TM40 1999‐03 SATRA TM43 2000‐06 SATRA TM47 2002‐06 SATRA TM48 1996‐08 SATRA TM49 1995‐04 SATRA TM50 1992‐12 SATRA TM51 1993‐08 SATRA TM52 2002‐01 SATRA TM53 1992‐09 SATRA TM55 1999‐03 Breaking strength and extension at break
N
Tear strength ‐ trouser leg method
N, CH
Abrasion resistance ‐ Martindale method N, CH
Nail penetration ‐ shoe bottoms and protective midsoles N
Moulded‐on rubber soles ‐ State of cure test N
Tensile strength and extension at break of leather N, CH
Water vapour permeability and absorption
N
Determination of grain crack index for sole leathers N, CH
Resistance to damage due to contact with a hot surface N, CH
Resistance of slide fasteners to repeated opening and closing
N
Lateral strength of slide fasteners
N
Strength of slide fastener pullers
N
Attachment strength of slide fastener end stops N
Flexing resistance of upper materials ‐ Bally flexometer N, CH
Period of validity: 04.02.2015 to 16.07.2017
Date of issue: 04.02.2015 8/13
Annex to the accreditation certificate D‐PL‐11339‐01‐00 SATRA TM60 1992‐07 SATRA TM64 1996‐07 SATRA TM65 1992‐05 SATRA TM68 1992‐05 SATRA TM92 1992‐05 SATRA TM94 1993‐06 SATRA TM102 1999‐06 SATRA TM108 1992‐09 SATRA TM113 1996‐12 SATRA TM118 1992‐08 SATRA TM120 2001‐07 SATRA TM123 1992‐07 SATRA TM133 1993‐03 SATRA TM134 1998‐10 Ross flex test ‐ Resistance to cut growth on flexing N, CH
Compression set ‐ Constant stress method
N, CH
Split tear strength
N
Density of cellular materials
N
Resistance of footwear to flexing
N
Breaking force and extension at break of shoe laces N, CH
Measurement of the limit of useful extension of elastics N
Strength of top‐piece attachment
N, CH
Measurement of the strength of attachment of heels N
Strength of sandal toe posts
N
Strength of attachment of straps and nailed or stapled uppers
N
Closure strength of touch and close fasteners N, CH
Resistance to crack initiation and growth ‐ Belt flex method
N, CH
Density of materials by volume displacement N, CH
Period of validity: 04.02.2015 to 16.07.2017
Date of issue: 04.02.2015 9/13
Annex to the accreditation certificate D‐PL‐11339‐01‐00 SATRA TM137 1995‐03 SATRA TM149 1999‐05 SATRA TM151 1999‐05 SATRA TM154 1999‐09 SATRA TM161 2004‐11 SATRA TM162 1999‐07 SATRA TM163 1996‐10 SATRA TM167 2001‐04 SATRA TM173 1995‐05 SATRA TM174 1994‐03 SATRA TM181 1996‐08 SATRA TM185 1995‐05 SATRA TM186 2001‐01 SATRA TM199 1999‐09 Tensile properties of plastics and rubbers
N
Strength of eyelet facings and other laced fastenings N
Strength of fastened buckles
N
Shoe lace to shoe lace and shoe lace to lace carrier abrasion
N, CH
Bennewart flex test ‐ resistance to cut growth on flexing N, CH
Tear strength ‐ Baumann method
N, CH
Abrasion resistance ‐ Taber method
N
Colour fastness to rubbing ‐ Crockmeter test N, CH
Colour fastness to rubbing ‐ Reciprocating method N, CH
Abrasion resistance ‐ Rotating drum method N, CH
Strength of buckle and strap attachment
N
Colour fastness to water spotting of leathers, textiles and coated N
fabrics Shape retention properties of toe caps of finished footwear
N
Water spotting ‐ Shoe care products
Period of validity: 04.02.2015 to 16.07.2017
Date of issue: 04.02.2015 N
10/13
Annex to the accreditation certificate D‐PL‐11339‐01‐00 SATRA TM205 1999‐02 SATRA TM218 1999‐06 SATRA TM220 2000‐08 SATRA TM226 1999‐06 SATRA TM305 1998‐03 Hardness of rubber and plastics ‐ Durometer method N, CH
Tear strength of rubbers and plastics ‐ Trouser method N, CH
Dynamic water penetration test for leather ‐ Bally permeometer N
method Slider locking strength of slide fasteners
N
Wick test
N, CH
Salt water corrosion (Method 2) N, CH
Hydrolysis of polyurethane based sheet materials N
Colour fastness to water and perspiration
N, CH
Hydrolysis of polyurethane solings and polyurethane coated leathers Colour fastness to dry cleaning
N
Rapid sole adhesion test ‐ For complete footwear N
SATRA TM 310 1992‐09 SATRA TM328 1992‐05 SATRA TM335 1994‐12 SATRA TM344 1995‐04 SATRA TM355 1999‐02 SATRA TM404 1992‐07 4 IS Test Methods IS 1989 Part 1 1986‐10 Amendment 1998‐10 Leather safety boots and shoes for heavy metal industries ‐ For N
Miners Period of validity: 04.02.2015 to 16.07.2017
Date of issue: 04.02.2015 N
11/13
Annex to the accreditation certificate D‐PL‐11339‐01‐00 IS 1989 Part 2 1986‐09 Amendment 1999‐04 IS 3735 1996‐03 Amend. 2001‐08 IS 3736 1995‐10 Amendment 2003‐09 IS 5557 2004‐10 Reaffirmed 2011‐03 IS 5676 1995‐10 IS 5852 2004‐08 IS 11226 1993‐11 Amendment 1998‐06 IS 12254 1993‐11 Reaffirmed 2002 IS 15298 Part 1 2011‐12 IS 15298 Part 2 2011‐06
Leather safety bots and shoes for heavy metal industries N
Canvas shoe rubber sole
N
Canvas boots, rubber sole
N
Industrial & safety lined boot
Moulded solid rubber soles and heels
Protective steel toe cap for footwear
Leather safety footwear direct moulded sole N
N
N
Polyvinyal chloride industrial boots
N
Safety, protective and occupational footwear for professional use ‐ Part 1 Safety, protective and occupational footwear for professional use ‐ Part 2 N
Period of validity: 04.02.2015 to 16.07.2017
Date of issue: 04.02.2015 N
12/13
N
Annex to the accreditation certificate D‐PL‐11339‐01‐00 IS 15298 Part 3 2011‐06 IS 15298 Part 4 2010‐11 abbreviations used: AS/NZS DIN EN IS ISO SATRA Safety, protective and occupational footwear for professional use ‐ Part 3 Safety protective and occupational footwear ‐ Part 4 Australian Standard/New Zealand Standard German Institute of Standard
European Standard
Indian Standard
International Organization for Standardization SATRA Technology Centre, Northamptonshire, NN16 8SD, United Kingdom Period of validity: 04.02.2015 to 16.07.2017
Date of issue: 04.02.2015 13/13
N
N