Download Report

Chennai Metro Rail Limited
(A Joint Venture of Govt. Of India and Govt. Of Tamil Nadu)
CORRIGENDUM NO: 1
Ref No: CMRL/MM/2014/ /LT/P-042/Cor.1
Date: 03.02.2015
Dear Sir / Madam,
Sub: Corrigendum of Tender Document - “Procurement of Tools”
Ref No. Tender Reference: CMRL/MM/2014/LT/P-042
Dated: 22.01.2015
This is with reference to the above stated tender document, pertaining to procurement
of tools. Following are the updated details of requirement:
1. Updated Specification For “Major maintenance Tools’
Sl. No.
Sl. No. in
Tender
Document
Item Name
2.
Torque Wrench of ½”
W/ Display
2.
3.
Reversible Socket
Torque Wrench ½” W/
Display
3.
4.
Reversible Socket
Torque Wrench ¾” W/
Display
4.
5.
Reversible Socket
Torque Wrench ¾” W/
Display
1.
Updated Specification
The required range is 12-68 Nm.
Corresponding to part no. EVT600A of
Stanley or equivalent. The supplier may
suggest any range which should include the
above range.
The required range is 70-330 Nm. The
supplier may suggest any range which
should include the above range.
The required range is 140-560 Nm. The
supplier may suggest any range which
should include the above range.
The required range is 200-810 Nm. The
supplier may suggest any range which
should include the above range.
Seal & Sign of Authorised Rep of Bidder
“Chennai Metro Rail Limited”, General Stores, CMRL depot, Poonamalle High Road, Koyambedu,
Chennai -107
page - 1 - of 4
5.
6.
7.
It is 8 Pcs for each set of 5 sets. Each set
TORX – Type L Wrench must have T9, T10, T15, T20, T25, T27,
T30, T40
11.
3 Jaw puller
It is external puller only.
Height of the spindle/ stroke length at least
75 mm. Maximum diameter of the object
that puller can hold shall be 75 mm
It is external puller only
Height of the spindle/ stroke length at least
150 mm. maximum diameter of the object
that puller can hold shall be 150 mm
7.
12.
3 Jaw puller
8.
22.
6 Pcs Punch Kit
9.
23.
Bottle jack
8 8Ton. minimum stroke length 230 mm and
maximum stoke length 457 mm
10.
24.
Bottle jack
20Ton. minimum stroke length 242 mm and
maximum stoke length 452 mm
11.
25.
Bottle jack
50Ton. minimum stroke length 300 mm and
maximum stoke length 485 mm
It is Pin Punch type.
2. Updated Specification For “Hand Tools – 1”.
Sl. No.
Sl. No. in
Tender
Document
Item Name
1.
3.
Universal Plier
Insulated
Updated Specification
8” Normal plier.
1. The size of the bag should hold all the
tools in the given list of hand tools
2.
10.
Tool Bag
2. Material shall be Nylon and water proof
3.
4.
15.
16.
Wire Stripper
Wire Cutter
6 inch
Wire size: AWG 12-22
Material: carbon steel
6 inch
Wire size: AWG 12-22
Material: carbon steel
Seal & Sign of Authorised Rep of Bidder
“Chennai Metro Rail Limited”, General Stores, CMRL depot, Poonamalle High Road, Koyambedu,
Chennai -107
page - 2 - of 4
3. Updated Specification For “Material Handling Tools”.
Sl. No.
1.
Sl. No. in
Tender
Document
2.
2.
3.
Item Name
Updated Specification
Polyster web slings
1. Quote should be for 2 no. of both side
plain loop and 2no.of endless sling.
2. Endless type : circumference
Polyster web slings
All other conditions would remain same.
1. Quote should be for 2 no. of both side
plain loop and 2no.of endless sling.
2. Endless type : circumference
All other conditions would remain same..
3. Updated Specification For “Hand Tools - 2”.
Sl. No.
Sl. No. in
Tender
Document
Item Name
1.
23
Impact Drill 1050W
240V
2.
24
Power Bit Set (162Pce)
Updated Specification
Variable speed forward and reverse. Heavy
duty two speed gear box, switches from
rotary to impact action
Locking side handle with integral metal
depth stop.
1. Power input :-1050 W (230 – 240 V)
2. No load speed : - 0 – 1,100 / 3,000 rpm
3. Chuck capacity : - 13mm (approximately)
4. Capacities :- i) wood 30mm, ii)steel
13mm, iii) concrete 16mm
Overall size (HxWxD) approximately:- (360x
260x100) mm
Multipurpose bits contains a comprehensive
range of most commonly used screwdriver
bits, nut spanners, Trox bits , Drill and
adaptors that are suitable for use with hand
and power tools. Supplied in a moulded
plastic carry case that has individually
storage slots for each tool bits.
a. 162 Piece Bit & tools Set
b. Overall Dimensions : (WxDxH)
approximately :- (455x178x297)mm
Seal & Sign of Authorised Rep of Bidder
“Chennai Metro Rail Limited”, General Stores, CMRL depot, Poonamalle High Road, Koyambedu,
Chennai -107
page - 3 - of 4
3.
25
24”/600mm Hi- Vis
Girder Section Level
4.
32
600mm Chisel &VNotch Wrenching Bar
Level gauge with 3 vials, horizontal and two
plumb, aluminum body with power coat
finish.
1. Length : - 600mm (24’’)
2. Accuracy :- 0.75mm/ m
3. Top face marking with metric and
inch markings in graduation.
V- Groove base for use on pipe works
Crow-Bar having one End With Nail
Removing Notch with a “V” Shaped Bend
and other end with Chisel shaped tool
(WRENCH). As a whole used for general
purpose
dismantling,
unpacking
and
stripping applications on wooden and
metallic boxes, for industrial & stores usage.
1. LENGTH :- 600MM
2. manufactured from heat treated
carbon steel
Note :The above given information are the addition to the specification given in the tender
document.
Schedule for Bid submission and Opening is extended to 12.02.2015 at 15.00 hrs.
You are requested to send your offer in the sealed quotation as per the extended schedule
and addressed to
Chennai Metro Rail Limited,
General Stores, CMRL depot, Poonamalle High Road,
(Opp. to Daniel Thomas School) Koyambedu, Chennai – 107
And on sealed quotation envelope written clearly as “QUOTATION FOR PROCUREMENTS
OF TOOLS AND DO NOT OPEN BEFORE 1530 HRS. ON 12.02.2015.”
All other conditions of tender document would remain same.
Pramod Somnathe
DGM (MM)
For & on behalf of CMRL
Seal & Sign of Authorised Rep of Bidder
“Chennai Metro Rail Limited”, General Stores, CMRL depot, Poonamalle High Road, Koyambedu,
Chennai -107
page - 4 - of 4