Aluminium Extrusion
DUMPING COMMODITY REGISTER 7604.10.00(1) R. 24 ALUMINIUM EXTRUSIONS EXPORTED FROM THE PEOPLE’S REPUBLIC OF CHINA Measures Anti-dumping measures in the form of interim dumping duty (IDD) and interim countervailing duty (ICD) have been imposed on aluminium extrusions exported from the Peoples Republic of China (China). Description of the goods The aluminum extrusions covered by measures: are produced by an extrusion process; are of alloys having metallic elements falling within the alloy designations published by The Aluminium Association commencing with 1, 2, 3, 5, 6 or 7 (or proprietary or other certifying body equivalents); have finishes being: as extruded (mill); mechanical; anodized; or painted or otherwise coated, whether or not worked; have a wall thickness or diameter greater than 0.5 mm; have a maximum weight per metre of 27 kilograms; and have a profile or cross-section fitting within a circle having a diameter of 421 mm. Goods subject to measures should be classified using the tariff sub-headings and associated statistical codes contained in Table 1. Table 1 - The tariff subheadings and statistical codes subject to measures Tariff subheading 7604.10.00 7604.21.00 7604.29.00 7608.10.00 7608.20.00 7610.10.00 7610.90.00 Statistical codes 06 07, 08 09, 10 09 10 12 13 Exempt exporters There is one exporter exempt from both IDD and ICD: Tai Ao Aluminium Tai Shan Co Ltd (Tai Ao). Exemption type ‘SUPPLIER’ applies to aluminium extrusions manufactured by Tai Ao and either exported directly by Tai Ao or supplied through Phoenix Endeavour Ltd. There is one exporter exempt from IDD only: Guangdong Zhongya Aluminium Company Limited (Guangdong Zhongya formerly known as Zhaoqing New Zhongya Aluminium Co Ltd). ICD will apply to aluminium extrusions manufactured by Guangdong Zhongya and either exported directly by Guangdong Zhongya or supplied through Zhongya Shaped Aluminium HK Holding Ltd. All other exporters are subject to IDD and ICD measures as advised in Table 3 below. Dates of Effect IDD and ICD were initially imposed on 29 October 2010 and were last revised on: 27 August 2011 – following reinvestigation; 21 November 2012 – following an accelerated review for Wuxi Xisha Photoelectric Aluminium Products Co Ltd 11 October 2013 – following a Federal Court decision 18 December 2013 – following an accelerated review for Guangdong Jinxiecheng Aluminium Manufacturing Co Ltd (Guangdong Jinxiecheng) and; 28 November 2014 – following an accelerated review for Zhaoqing Xinlianchang Metal Corporation Ltd (Zhaoqing Xinlianchang). Reflecting the Federal Court Orders, the changes to the anti-dumping measures related only to aluminium extrusions exported by Tai Shan City Kam Kiu Aluminium Extrusion Company and Panasia Aluminium China. No changes were made to the anti-dumping measures applicable to other Chinese exporters of aluminium extrusions. Australian Dumping Notice (ADN) 2013/80 provided further information to assist affected importers and Customs brokers. Change 03/02/2015 DUMPING COMMODITY REGISTER 7604.10.00(2) ALUMINIUM EXTRUSIONS EXPORTED FROM THE PEOPLE’S REPUBLIC OF CHINA Dates of Effect (continued) The accelerated review applied resulted in the imposition of exporter specific anti-dumping measures applying to aluminium extrusions exported by Guangdong Jinxiecheng. ADN 2013/74 provides further information to assist affected importers and Customs brokers. The accelerated review for exports of aluminium extrusions by Zhaoqing Xinlianchang resulted in the imposition of exporter specific anti-dumping and countervailing measures. ADN 2014/131 provides further information to assist affected importers and Customs Brokers. Identifying the goods subject to measures Table 2 provides guidance to importers and brokers to assist in the categorisation of aluminium extrusions into the types covered by interim duties (GUC), and those not covered (Non GUC). In most cases, extrusions classified to headings 7604 or 7608 would be subject to IDD and/or ICD. Importers should use the table to categorise their goods and decide whether dumping and countervailing duties apply. Table 2: - The goods covered by measures 1 Aluminium extrusions < Goods Under Consideration (GUC) > 2 3 Aluminium Aluminium extrusions extrusions that are with minor parts intended for working use in intermediate or finished products Mill finish, painted, powder coated, anodised, or otherwise coated aluminium extrusions Precision cut, machined, punched or drilled aluminium extrusions Aluminium extrusions designed for use in a door or window 4 Aluminium extrusions that are themselves finished products 5 Unassembled products containing aluminium extrusions < Non GUC > 6 Intermediate or partly assembled products containing aluminium extrusions < Examples > Carpet liner, Kits that, at time of import, fence posts, comprise all necessary heat sinks parts to assemble finished goods. For example, shower frame kits, window frame kits, unassembled unitised curtain walls Unglazed window or door frames 7 Fully assembled finished products containing aluminium extrusions Windows, doors Direction for collection of IDD and ICD Goods subject to the measures must be entered using the relevant dumping specification number (DSN) for the nominated exporter/supplier as shown in Table 3 and the export price terms shown in Tables 6 and 7. PLEASE NOTE: The All Other Exporter rate of ICD and/or IDD will apply unless an importer/broker can provide proof that the goods are being supplied either directly by a named exporter or through a linked supplier(s). The IDD for all exporter/suppliers except Guangdong Jinxiecheng and Zhaoqing Xinlianchang is in the form of a fixed + variable measure. The IDD liability is calculated as follows: the dumping export price (DXP) or ascertained export price (AEP), whichever is the greatest, multiplied by the IDD ad valorem duty rate; Plus the amount, if any, by which the DXP is lower than the AEP. For Guangdong Jinxiecheng and Zhaoqing Xinlianchang, the IDD is in the form of a floor price. The IDD liability is calculated as the difference between the DXP and both the normal value and the non-injurious price (NIP) and is payable only where the DXP is less than both the normal value and NIP. The ICD for all exporter/suppliers is in the form of a fixed measure. The ICD liability is calculated by multiplying the DXP by the ICD ad valorem duty rate. DUMPING COMMODITY REGISTER 7604.10.00(3) R. 29 ALUMINIUM EXTRUSIONS EXPORTED FROM THE PEOPLE’S REPUBLIC OF CHINA Release of details of measures Unless otherwise advised, the rate of IDD and the AEP for each DSN in Tables 6 and 7 are considered Confidential and will not be published. Bona fide importers of the goods may be provided with the confidential information relevant to a nominated exporter/supplier or country in the case of country wide measures. The onus is on the importer to prove their bona fides by providing evidence of the following to [email protected]: a previous trading history with a nominated exporter/supplier of the goods from a country subject to dumping/countervailing measures. Evidence of a trading history would take the form of at least commercial invoices, packing list and bills of lading from previous shipments. Additional documentation as proof of bona fides may also be requested. in the absence of a trading history, an offer or a quotation from an exporter/supplier of goods subject to dumping/countervailing measures. The offer or quotation must be on the exporter/supplier’s company letterhead – emails will not generally be accepted. or Importers should note that only as much of the confidential information as is necessary to enter the goods will be provided. ACDN 2012/61 provides further information to assist importers and Customs brokers. The Australian Customs and Border Protection Service (ACBPS) will conduct monitoring of imports subject to anti-dumping measures consistent with its published policy. Duty Assessment Where anti-dumping measures have been imposed on goods exported to Australia, the importer is liable to pay IDD and/or ICD at the time of importation. The rates of IDD and/or ICD are based on prices verified during the original dumping investigation or subsequent review of the duty and are in place for a period of five years unless revoked earlier. To ensure that the amount of IDD and/or ICD collected by ACBPS does not exceed the actual dumping and/or subsidy margin for each consignment over the five-year period, provision exists for assessment of the final duty liability under the Customs Tariff (Anti-Dumping) Act 1975. This system allows for any excess interim duty to be refunded where it is found that prices have changed since the original investigation or subsequent review. There are a series of time frames fixed by legislation that govern the duty assessment system. An application for duty assessment must cover all shipments entered for home consumption by an importer in a specific six-month importation period. The six-month period is determined by the date of publication of the initial notice imposing the dumping duty. Where securities have been taken pending the Minister's decision, the importation period may be less than six months. An application for a duty assessment cannot be lodged prior to the end of the particular importation period to which it relates, but must be lodged with the Anti-Dumping Commission within six months from the end of that importation period. Table 8 provides detail of the relevant importation periods and application periods for aluminium extrusions exported from China. Additional information is available at http://www.adcommission.gov.au/system/csi/WhatisDA.asp Change 03/02/2015 DUMPING COMMODITY REGISTER 7604.10.00(4) ALUMINIUM EXTRUSIONS EXPORTED FROM THE PEOPLE’S REPUBLIC OF CHINA Table 3 – Exporters and DSN Exporter CCID Finish Measure DSN CCE6997349W CCF9494397L CCG3779374P CCG6436934M CCX4494337G CCY7374367R All types Exempt IDD & ICD CEL9644346C CCW6474494R CCE3446434L Mill Anodised Powder coated Other ICD only ICD only ICD only ICD only 31 32 33 34 Guangdong Jinxiecheng Al. Manufacturing Co., Ltd Supplied directly or through Foshan Nanhai Newtime Trading Co., Ltd CEL4673763R CEL4396669W All types IDD & ICD 77 Tai Shan City Kam Kiu Aluminium Extrusion Co Ltd Supplied directly or through Kam Kiu Aluminium Products Sdn Bhd CCE7444964M All types IDD & ICD 75 Panasia Aluminium China Supplied directly or through Panasia Aluminium (Macao Commercial Offshore) Ltd Or Opal Macao Commercial Offshore Limited CCP7733374Y CCT9974764M CEA4736366H CCX3667779Y All types IDD & ICD 76 Wuxi Xisha Photoelectric Aluminium Products Co Ltd CCT9979499R Mill Anodised Powder coated Other IDD & ICD IDD & ICD IDD & ICD IDD & ICD 55 56 57 58 Zhaoqing Xinlianchang Metal Corporation Ltd Supplied directly or through Fo Shan Heng He Import and Export Trading Co. Ltd CEW3663676A CER9437694Y All types IDD & ICD 88 Residual exporters (Group 1) See Table 4 for list of exporters and associated suppliers Mill Anodised Powder coated Other IDD & ICD IDD & ICD IDD & ICD IDD & ICD 42 43 44 45 Residual exporters/suppliers (Group 2) See Table 5 for list of exporters and associated suppliers Mill Anodised Powder coated Other IDD & ICD IDD & ICD IDD & ICD IDD & ICD 46 47 48 49 All other exporters Mill Anodised Powder coated Other IDD & ICD IDD & ICD IDD & ICD IDD & ICD 50 51 52 53 Exempt exporter Tai Ao Aluminium Tai Shan Co Ltd Supplied directly or through Phoenix Endeavour Ltd Exporters covered by interim countervailing and/or dumping duties Guangdong Zhongya Aluminium Company Limited (Formerly known as Zhaoqing New Zhongya Aluminium Co Ltd) Supplied directly or through Zhongya Shaped Aluminium HK Holding Ltd DUMPING COMMODITY REGISTER 7604.10.00(5) R. 4 ALUMINIUM EXTRUSIONS EXPORTED FROM THE PEOPLE’S REPUBLIC OF CHINA Table 4 – Residual Exporters (Group 1) Exporter Alnan Aluminium Co., Ltd Beijing General Research Institute For Non Ferrous Metals Cosco (J.M) Aluminium Development Co., Ltd Foshan Guang Cheng Aluminium Co. Ltd. Foshan Sanshui Fenglu Aluminium Company Limited Fujian Minfa Aluminium Co Ltd Golden Power Co., Ltd. Guangdong Huachang Aluminium Factory Co., Ltd Guangdong Jianmei Aluminium Profile Factory Co., Ltd Guangdong Weiye Aluminium Factory Co., Ltd. Guangdong Xingfa Aluminium Company Limited Guang Ya Aluminium Industries Co., Ltd Hydro Aluminium (Suzhou) Co., Ltd Jiangyin East-China Aluminium Technology Co., Ltd Kingle Aluminium Technology Stock Co., Ltd New Hocha Aluminium Industry Co., Ltd Penglai Sanling Locks Co., Ltd Pmh Aluminium Extrusion Co., Ltd Press Metal International Ltd Shanghai Unison Aluminum Products Co., Ltd Silver 100 Aluminium Innovation (Guangdong) Limited Taishan Golden Gain Aluminium Products Limited Yangjiang Kitsen Construction Hardware Co., Ltd Supplied by Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same Same CCID CCK7697673M CCC6793964J CCJ7747734W CCM9936747Y CCH4996939T CCJ3676734G CCT6336447T CCJ6397766Y CCE3676336W CCK6394664G CCL4663433G CCT3446763W CCK6499693N CCR3493934E CCN9463949N CCH6364363W CCJ6493494N CCT3343446N CCK6444394Y CCN7639666A CCP6336366K CCT6669669E CCL9367664H Table 5 – Residual Exporters/Suppliers (Group 2) Exporter Foshan JMA Aluminium Co., Ltd Guangdong Jianmei Aluminium Profile Factory Co., Ltd Shandong Nashan Aluminium Co Ltd Shandong Nashan Aluminium Co Ltd Foshan Nanhai Yongfeng Aluminium Co., Ltd Foshan Nanhai Yongfeng Aluminium Co., Ltd Fujian Longyan Lianfa Aluminium Co. Ltd Fujian Yongchun Chuangheng (Shaungheng) Aluminium Fuzhou TCI Corporation Taishan Golden Gain Aluminium Products Limited Taishan Golden Gain Aluminium Products Limited Fujian Minfa Aluminium Co Ltd Guangdong Xingfa Aluminium Co Ltd Supplied by JMA HK Company Limited JMA HK Company Limited Longkou Donghaitrade Co., Ltd Yantai Jintai International Trade Co., Ltd Nanhai Textiles Import & Export Company of Guangdong Guangdong Nanhai Foodstuffs Import and Export Co Xiamen Hongchi Trade Co. Ltd Xiamen Hongchi Trade Co. Ltd Taiwan Viva Corporation Innovative Aluminium (Hong Kong) Ltd Centor Architectural Nanjing Limited Shanghai Asia Foreground International Trade Co Ltd Yangzhou Camets Technique Co Ltd CCID CCG6634366G CCG6634366G CCG6773466A CCY9793677N CCC9746446H CCE9743373N CCH4999466L CCH4999466L CCH9649773F CCY3643469W CEG3697439P CCM3366499G CCT7434364H CCT3644376A Change 03/02/2015 DUMPING COMMODITY REGISTER 7604.10.00(6) ALUMINIUM EXTRUSIONS EXPORTED FROM THE PEOPLE’S REPUBLIC OF CHINA Table 6 – Fixed and Variable (Interim Duty Rates, AEP) DSN IDD/DSA ad valorem rate (%) N/A N/A N/A N/A Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Effective rate of duty AEP AUD/kilo Export terms 31 32 33 34 42 43 44 45 46 47 48 49 50 51 52 53 55 56 57 58 75 ICD/CSA ad valorem rate (%) Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Remarks 7.6% 7.6% 5.5% 7.6% 12.4% 9.6% 6.4% 0.0% 12.4% 9.6% 6.4% 0.0% 22.4% 30.1% 24.1% 33.3% 10.6% 33.7% 29.3% 5.1% 2.1% N/A N/A N/A N/A Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential Confidential FOB, cash FOB, cash FOB, cash FOB, cash FOB, cash FOB, cash FOB, cash FOB, cash FOB, cash FOB, cash FOB, cash FOB, cash FOB, cash FOB, cash FOB, cash FOB, cash FOB, cash FOB, cash FOB, cash FOB, cash FOB, cash 76 Confidential Confidential 10.1% Confidential FOB, cash Goods exported and entered for home consumption after 29 October 2010 Goods exported and entered for home consumption after 21 November 2012 Goods exported and entered for home consumption after 11 October 2013 Table 7 – Floor Price (Normal Value and NIP) DSN 77 88 ICD Ad valorem Rate (%) Confidential Confidential Export terms Normal value FOB, cash FOB, cash Confidential Confidential Normal Value Currency AUD/kilo AUD/kilo NIP NIP Currency Confidential Confidential AUD/kilo AUD/kilo Table 8 – Duty Assessment Importation & Application Periods Importation Period 28 October 2012 – 27 April 2013 28 April 2013 – 27 October 2013 28 October 2013 to 27 April 2014 28 April 2014 – 27 October 2014 28 October 2014 to 27 April 2015 28 April 2015 – 27 October 2015 Application Period 28 April 2013 to 27 October 2013 28 October 2013 to 27 April 2014 28 April 2014 – 27 October 2014 28 October 2014 to 27 April 2015 28 April 2015 – 27 October 2015 28 October 2015 to 27 April 2016
© Copyright 2024