Navy and Commercial Marine Products

Navy and
Commercial
Marine Products
Flow Control
Marine Products Overview
Tyco Valves & Controls remains a leader in the Marine Industry, providing an
extensive range of quality valves, actuators and controls to the Navy and
commercial shipbuilders. Over the years applications have grown and Tyco has
responded with new, innovative products designed to meet the harsh
environment of offshore service.
One of our brands, Keystone, is known in the Marine Industry for quality
resilient seated and high performance butterfly valves that meet Navy
Mil-V-22133 and Mil-V-24624 requirements as well as rubber seated and
firesafe ventilation valves. Tyco also has the Vanessa metal-seated, triple offset
valve, available with an aluminum bronze marine trim that provides significant
space and weight savings over traditional gate valves.
Tyco Valves & Controls supports on going research and development
dedicated to serving the Navy and Commercial Offshore Industry.
Our products are installed on board the following types of sea-going vessels:
•
•
•
•
•
•
Aircraft Carriers
Barges
Cargo Ships
Container Ships
Destroyers, Cruisers, Frigates
FPSO’s
•
•
•
•
•
•
LNG Vessels
Nuclear Submarines
Passenger Liners
Tankers
Tugs
LPD, LHD, and LHAS
Applications aboard these vessels include:
•
•
•
•
•
•
•
•
•
Air Systems
AFFF
Ballast Systems
Bilge Systems
Cargo Oil Systems
Chilled Water
Condensate Isolation
Emergency Shut-Down Systems
Firemain Systems
• Fresh Water Systems
• Fuel Systems
• Inert Gas Systems
• Lube Oil Systems
• Manifolds
• Raw Water Suction
• Sea Water Systems
• Sea Chests
• Ventilation Systems
2
Resilient Seated Butterfly Valves
Keystone AR1/AR2
One-piece body, dovetail replaceable seat, ABS (USCG) Category A.
Size Range:
Figure AR1 (wafer style), 2” to 36”
Figure AR2 (lug style), 2” to 24”
Pressure Rating:
2” to 12”, 175 psi
14” to 36”, 150 psi
Materials of Construction: Body - CI, DI, NAB
Disc - DI, AB, 316 SS
Seat - BUNA-N, EPDM
Keystone 320/322
One piece body, molded in seat ABS (USCG), Category A.
Size Range:
Figure 320 (wafer style), 2” to 12”
Figure 322 (lug style), 2” to 12”
Pressure Rating:
232 psig
Materials of Construction: Body - DI (A395)
Disc - AB, 316 SS
Seat - BUNA-N, EPDM
Keystone 129/139
One-piece body, reinforced cartridge seat, ABS (USCG) Category A, Navy Mil-V-22133.
Size Range:
Figure 139 (wafer style), 2” to 20”
Figure 129 (lug style), 2” to 20”
Pressure Rating:
200 psi
Materials of Construction: Body - CI, NAB, DI (A395)
Disc - DI, AB, 316 SS
Seat - BUNA-N, EPDM
3
Keystone 602
One-piece body, reinforced cartridge seat, ABS Category B.
Size Range:
2” to 24”
Pressure Rating:
2” to 12”, 250 psi
14” to 24”, 150 psi
Materials of Construction: Body - DI, (A395)
Disc - AB (B148)
Seat - BUNA-N
Keystone 106
One-piece double flanged body, reinforced dovetail seat, ABS (USCG) Category A.
Size Range:
24” to 48”
Pressure Rating:
150 psi
Materials of Construction: Body - CI, DI, WCB, NAB
Disc - AB (B148)
Seat - BUNA-N, EPDM
High Performance
Keystone 310/312
ABS (USCG) Category A.
Size Range:
310 (wafer), 21/2” to 12”
312 (lug), 21/2” to 12”
Pressure Rating:
285 psi
Materials of Construction: Body - WCB, 316 SS
Disc/Stem - 316 SS/17-4
Seat - RTFE, PTFE
Temperature Rating:
-20°F to 350°F
High Performance Cont. on Page 5
4
Keystone 360/362 and 370/372 K-LOK®
• The K-LOK® valve is approved by the American Bureau of Shipping (ABS), for Category P
applications.
• The K-LOK® Figure 360/362 Marine valves are approved for use by Naval Sea Systems
Command and Department of the Navy for MIL-V-24624(SH) applications.
• Optional bi-directional/dead-end service available.
• Standard materials of construction include carbon steel, 316 stainless steel and aluminum
bronze.
• Figure 360/370 (wafer style); Figure 362/372 (lug style)
Size Range:
2” to 36” Commercial Trim
21/2” to 14” Marine/Navy Trim
Pressure Rating:
285 psi and 740 psi
Fire Test:
API 607, 4th Edition
Temperature Rating: -20°F to 1000°F
Winn HiSeal
• DNV Certified, ABS approved
• Bi-directional/Dead-end Service available
Size Range:
2” to 48” ANSI 150
2” to 24” ANSI 300
Pressure Rating:
285 psi and 740 psi
Fire Test:
API 6FA, API 607
5
Triple-Offset Torque
Seated Valves
Vanessa Triple Offset
A typical high performance butterfly valve is manufactured with either a single or double
offset shaft design. These shaft offsets are created by designing the valve with the
shaft located behind the CL of the sealing surface and slightly to side of the pipe CL. The
purpose of these offsets is to reduce the rubbing and thus the wear between the seat
and seal to approximately 20 degrees of travel.Vanessa adds a unique third (inclined
cone - offset 3) to allow not only camming, but also to completely eliminate all seat-toseal rubbing throughout the valve’s entire 90 degrees of rotation.
Vanessa 30,000
• Commercial trims available in carbon steel, stainless steel and special alloy options.
• Marine/Navy trim available with an aluminum bronze body, disc and seat, with Monel®
shaft and seal ring. Valves also available in cres 316 Stainless, Inconel® 625 and other
materials.
• Vanessa is suitable for use in firemain isolation as well as many other applications
where tight shut-off valves are required.
• Vanessa provides valuable space and weight savings over traditional gate valves and
ball valves.
Size Range:
3” to 36” Commercial Trim
3” to 12” Marine/Navy Trim
Face-to-face:
API 609, ANSI B16.10, ISO 5752
Testing:
API 598 Resilient, API 6D
Fire Test:
API 607, 4th Edition
Shock Test:
MIL-S-901D
Vibration Test:
MIL-STD-167-I
Face-to-Face:
Available
MiL-V-22133 and MiL-V-24624
Monel® is a registered trademark of International Nickel Company.
6
Navy Ventilation Valves
Keystone 640/660
• Valves designed for use as airtight and watertight closures.
• The 640/660 valves are built to BUSHIP Drawing #805-1749102/1749103 Rev. B.
• Aluminum body and disc, 18-8 stainless steel stem, neoprene seat.
Size Range 640:
21/2” to 30”; R 2.5 - R30
Size Range 660:
7” x 3” to 30” x 20”; K31 - K41
Pressure Rating:
15 psi working, 30 psi test
660
640
661
641
Keystone 641/661
• Valves designed for airtight and watertight closures as well as fire dampers.
• The 641/661 valves are built to BUSHIP Drawing #804-1749102/1749103 Rev. C.
• 316 stainless steel body and disc, Inconel® upper stem, 17-4 lower stem,
silicone/intumescent seat.
Size Range 641:
21/2” to 30”; R2.5 - R36
Size Range 661:
7” x 3” to 30” x 20”; K31 - K41
Pressure Rating:
15 psi working, 30 psi test
Ball Valves
Hindle Ultra-Seal
DNV and ABS approved
Size Range:
Series 110, 1/2” to 2”
Series 200, 3” to 16”
Pressure Rating:
285, 720, 1400 psig
Materials of Construction: Body - 316 SS, WCB, LCB, AB, Monel®, Duplex
Ball - 316 SS
Seat - RPTFE, PTFE, PEEK, UHMP
7
KTM
KTM offers a wide variety of Ball Valves with a multitude of material and seat options.
Size range:
1/2”
to 24”
Pressure Rating:
285, 720 psi
Standards:
API6D, ANSI B16.34, Meets NACE MR0175 for Sulfide
Cracking Resistance
OMNI II
3100
Specialty Valves
KTM V-Ports, VS Series
For accurate modulating control.
Model/Sizes:
VS 11, 1” to 4”
VS 21, 6” to 8”
Pressure Rating:
ASME Class 150
Rangeability:
100:1
Temperature:
-20°F to 482°F
Materials of Construction: Body - 316 SS, WCB, 317SS
Trim - 316 SS/HCR
Tyco Programmable Automated Valve (PAV)
A “Smart” valve package with programmable capabilities to detect and automatically
isolate line ruptures.
Size Range:
2” to 12”
Pressure Rating:
285 and 740 psi
Pressure Class:
Class 150 and 300
Options:
Modified 803-5000103 reduced port ball valve or
triple offset Vanessa valves
Specialty Valves Cont. on Page 9
8
Gimpel Trip Throttle
Pull-to-close design operates "open or closed" and includes a separate exerciser providing an
on-line partial stroking capability with no disruption in operation. Gimpel offers a full line of
engineered valves for main and ship service steam turbine protection:
• Trip throttle valves
• Governor valves
• Main engine ahead and astern control and stop valves
Pressure Class:
ANSI Class 150 - 2500
Sizes:
3” to 24” (other custom configurations available)
Electric Actuators
Keystone 777
The Keystone EPI electric actuator is provided with a self-locking gear train that allows for a
compact design. The product is standard equipped with a manual override, mechanical travel
stops, visual mechanical position indicator and adjustable limit switches. It is designed for direct
mounting to Keystone valves.
• Available in Navy Trim:
- Shock/qualified to MIL-S-901C
- Vibration qualified to MIL-STD-167-1
- Fire tested to API-607
• Available in NEMA 4X or NEMA 7 enclosures with Factory Mutual, UL or CSA approvals.
• UL recognized motor with thermal overload devices in motor windings protects the motor
should overheating occur.
• Available Options:- 4-20 mA
- Servo-amp/speed control module
- Potentiometers
- Retransmission module
- Control boxes
- Networked Controllers
Voltages:
12-24 VDC; 120-575 VAC
Output Torque:
Up to 15,100 lb.in.
Temperature Range:
-40°F to 120°F
9
Biffi ICON Multi-Turn
• ICON control system offers non-intrusive calibration via the local push buttons or a
digital bus system without the use of a hand held device.
• Standard features include timer, ESD relay, monitor relay, phase
protection/correction.
• 40 digital I/O (inputs/outputs) for control, diagnostics, and status.
Output Torque: Up to 830,000 in. lb.
Nu-Torque MS
Nu-Torque electric actuators offers the flexibility of either quarter turn or multi turn units
housed in a rugged bronze body. Options include:
• 8 Position Limit Switches, Individually Adjustable
• OPEN and CLOSE Torque Limit Switches
• Differential Drive, Low Effort Side Mounted Handwheel
• Mechanical Position Indicator Located Near the Handwheel
• Mechanical Stops for Quarter-Turn Applications, Adjustable From 80 to 100 Degrees
• Integral Mechanical Reversing Controller with Valve Logic
• Explosion Proof Design
• 110V to 440V induction DOD-V-24657 motors or nutating motors
• Shock, vibration, EMI and ESS tested/qualified
Nu-Torque (Non-intrusive)
Nu-torque offers new technology in Non Intrusive actuators for the marine industry. This
rugged bronze body actuator allows for the setting off all functions to be done through
the display window and push buttons or via remote handheld unit. This allows for a
safer work environment because the working internals are not exposed to the worker
or environment.
10
Hydraulic Actuators
Nu-Torque 40000 Series
The Nu-Torque hydraulic actuator is available in a variety of configurations to best meet your
needs.
Some of the features include:
• Constructed of Silicon Bronze with Stainless steel gears, shafts, and fasteners.
• Operating pressure from 250 to 900 psi with MIL-P-18111A Motor
• Operating pressures up to 3000 psi with optional motors.
• Internal limit switch compartment, eliminates external linkages
• Differential Drive Handwheel System for manual override. This system allows use at any time
without the need to engage or dis-engage the handwheel. Will allow movement even if motor
is frozen up and will not move.
• Direct Drive System – This system provides direct operation of the main worm shaft, and
therefore allows for the quickest operation. The motor must be free to rotate in order to use
Morin HP Series Actuator
• High pressure construction eliminates undesirable regulators and
relief valves for supply pressures up to 1,500 psig
• Hydraulic dampening provides smooth “open-close” operation
to prevent detrimental valve slamming
• Ductile iron housing provides long product life with durable, cost effective operation
• Cylinders of 316 stainless steel provide unrivaled corrosion resistance
• Teflon® guide bands ensure low friction piston guidance during operation.
• Tectyl-coated springs can be disarmed without special tools to safely and easily
disassemble the actuator in the field, reducing down time and providing a “man-safe”
spring.
• ABS Category RQS approval
Pneumatic Actuators
Morin S Series Actuator, Double Acting and Spring Return Models
• Stainless steel construction provides superior corrosion resistance both
internally and externally.
• Scotch yoke design using precision bearings eliminates dead band in the
yoke mechanism, providing the greatest torque output at the beginning
and end of stroke.
• Self-lubricating PTFE bushings and bearings provide low friction operation, longer life and
reduced maintenance cost.
• Bi-directional travel stops provide accurate valve rotation adjustment.
• ‘Man-safe’ spring design requires no special tools to safely and easily disarm the spring.
• ABS Category RQS approval including underwater (100’ depth)
11
Morin B Series Actuator, Double Acting and Spring Return Models
• Ductile iron housing, piston and endcaps provide long product life with durable, cost
effective operation, making the B Series very competitive with commodity actuators.
• 316 stainless steel cylinders provide unrivaled corrosion resistance.
• Heat-treated stainless steel thrust pin and roller bearings transfer piston
force to 17-4PH stainless steel yoke by rolling to reduce friction, for longer life
and more efficient torque transmission.
• Sintered bronze bushings or sealed needle bearings on output shaft eliminate
side loading of valve to maximize stem packing performance.
• Teflon® piston guide bands ensure low friction piston guidance during operation to
protect cylinder walls from potential scoring and extend seal performance with a
continuous cylinder wiping action.
• Bi-directional travel stops provide accurate valve rotation adjustment.
• ‘Man-safe’ spring design requires no special tools to safely and easily disarm the spring.
• ABS Category RQS approval including underwater (100’ depth)
Teflon® is a registered trademark of E.I. du Pont de Nemours Company.
Morin MRP and MRS
• Compact rack and pinion design delivers maximum output torques in a small
compact package.
• Full bearing support on every moving part for long life.
• Spring design allows for easy adjustment in the field for different supply pressures.
• Available in Hard Anodized epoxy coated body or Special Nickel Impregnation (SNP)
for more corrosive applications.
MRP
• Both the MRP and MRS come standard with travel stops, allowing for adjustment
of +/-5 degrees in both directions.
MRS
• Available in either ISO mounting or direct mount on most Tyco valves.
Supply Pressure:
40 - 120 psi
Output Torque:
Double Acting 204 - 13,523 lb. in.
Spring Return 152 - 3260 lb. in.
12
Networking
Electric and Pneumatic
Standard Network Protocols
The Network Card
DeviceNet, PROFIBUS, FOUNDATION fieldbus
and AS-interface have emerged as
accepted standards for interfacing discreet
devices.
Depending upon the network standard
selected (DeviceNet, PROFIBUS, FOUNDATION
fieldbus, AS-interface, LonWorks or
Modbus) a dedicated network card is
integrated within the enclosure of each
PlantNet Control Monitor.
They have proved to be extremely reliable,
simple to understand and consistently cost
effective. These two major network
standards readily integrate with PLC’s and
DCS systems from various manufacturers,
through off-the shelf gateway or scanner
interfaces.
®
®
Reduced wiring
Reduced Installation
Cable
2 Core
2 Twisted Pairs and
Shield**
Distance
100m†
500m
1200m/segment
1900m/segment
62 - AS-i 2.1
63
32/segment,
126/network
12/segment, 5 segments/system*
167Kbs
125Kbs/250
Kbps/500
9.9, 19.2, 93.75, 187.5,
500, 1500, 12000 kbps
31.25
Addresses
Speed
Topology
Trunk, Tree,
Star, Drop
Trunk, Drop
2 Twisted Pairs and
Shield**
Daisy chain
1 Twisted Pair
Daisy chain, trunk/drop
(spurs), branching drop
(spurs), point-to-point
Inputs
2
2
4
4
Outputs
1
1
2
2
Diagnostics
No
Yes
Yes
Yes
Redundancy
No
No
No
Yes
Yes
Yes
Yes
Yes
On/Off
Modulating Control
No
Yes
Yes
Yes
Electric Actuator
Yes
Yes
Yes
Yes
Pneumatic Actuator
Yes
Yes
Yes
Yes
G.P./Class I Div. 2
G.P./Class I Div. 2
G.P./Class I Div. 2
G.P./Class I Div. 2
Gateway
Scanner Card
Scanner Card
Scanner Card
Will communicate with
higher level fieldbus via
a gateway, ie.
DeviceNet, InterBus.
Will communicate
directly with PLC or
DCS.
Will communicate
directly with PLC or
DCS.
Will communicate
directly with PLC or
DCS.
Hazardous
Communication
† Repeaters may be used
to extend the distance
limits
** Four conductor flat cable
available
AS-interface® is a registered trademark of AS-International.
DeviceNet™ is a registered trademark of ODVA.
FOUNDATION™ fieldbus is a registered trademark of the Fieldbus Foundation.
PROFIBUS is a registered trademark of PROFIBUS International.
13
* Number of addresses
reduces for intrinsically
safe hazardous areas
Actuator Accessories
Pneumatic AVID Position Monitors
The AVID range of Position Monitoring equipment offers models for all
service classifications, each model incorporating numerous userfriendly features, including HiVue Local Visual Display, EasiFix Switch
Adjustment and ModMount Assembly facilities.
ZR and ZR PLUS
Position Monitors
K-Switch™ Quarter-turn
Position Indicator
XA Position
Monitor
K-Block
Position Monitor
Pneumatic AVID Positioners
M-Cal
The AVID range of Control Positioners offers a variety of solutions for the
precise positioning of rotary and linear pneumatic actuators. These
positioners are suitable for use with either double acting or spring return
actuators, and are mounted to the actuator housing either directly with
proprietary ModMount or NAMUR (VDI/VDE 3845) standards. These
units also provide the simplest form of installation and calibration as
standard, without the requirement for additional equipment.
SmartCal® Intelligent
Positioner
EaziCal® IR Analog
Positioner
14
Check Valves
Prince 800 Series Wafer Swing Check Valve
• Short wafer or semi-lugged body minimizes piping support.
• Internal or external spring assists with disc closure.
• Field replaceable seat for easy maintenance.
• Vertical or horizontal check valves available to suit application.
• Optional hydraulic cushion prevents slamming of the disc.
• Available in a wide variety of trims and materials.
Size Range:
2” to 36”
Pressure Rating:
150, 285 and 740 psi
Flange Standard:
ANSI 125, 150 and 300
Gulf Valve Model MB Check Valve
• Light weight, versatile design, 80 to 90% lighter than conventional full-body
check valves.
• Spring-loaded, double door design has low cracking pressure.
• Discs open 85° to ensure positive closing.
• Resilient or metal-to-metal seat available.
• BUNA-N, Viton®, EPDM (and other materials as required) captured in a body
groove.
Size Range:
2” to 60”
Pressure Classes:
ASME 125 - 2500
API 2000 - 5000
Temperature Range:
-426°F to 1100°F
FloCheck Check Valve
Precision engineered, non-return (check) valves in spring loaded dual disc design for oil,
gas, water, chemical, HVAC and pumping system applications.
Size Range:
2” to 72”
2” to 40” ABS approved
Pressure Range:
from ASME Class 125 - 2500
Temperature Range: -448°F to 2000°F
15
Crosby Specialty Swing Check Valves
Shock and Vibration Qualified Swing Check Valves
Size Range:
1/4”
Pressure Rating:
230 to 1200 WOG
Connections:
Flanged, Socket Weld, Sil-Braze and Butt Weld
Materials:
CuNi, Monel®, Stainless Steel, NiAlBrz and Carbon Steel
to 6”
Mil-Spec Relief Valves
Anderson Greenwood and Crosby
Configuration: (Modified API/Code valves)
Direct Spring Loaded
Top Guided
Flat Seats (Soft and Metal)
Qualified Anderson Greenwood:
Series 83 Union Ended, 20 to 4000 psi Set, Liquid Service (Mil-V-24322), Air Service (Mil-V22549)
Series 81P Flanged, 50 to 6000 psi Set, Liquid Service (Mil-V-24322)
A complete offering of materials in sizes from 1/2” to 2” and pressure ranges is available for
the Series 83 and Series 81 Pressure Relief Valves
Qualified Crosby:
Series 800/900 threaded and flanged Pressure Relief Valves, style JOS Flanged Full Nozzle
Pressure Relief Valves, and style HS and HSJ Full Nozzle steam service Safety Relief Valves
Sizes: 1/2” to 8”
Pressures: Flanged to Class 2500 and threaded to 5000 PSI
Please refer to www.tycovalves.com for a full and complete
listing of all of our ASME Code/API Threaded, Flanged, Full
Nozzle, and Semi Nozzle, Direct Spring Operated Pressure Relief
Valves, Pilot Operated Pressure Relief Valves, Safety Relief
Valves, and Vacuum Relief Valves available in numerous material
combinations, sizes and pressure ranges for all services.
Mil-Spec Valves Cont. on Page 17
16
Kunkle Mil-Spec Pressure Relief Valves
Configuration:
Direct Spring Loaded
Top and Bottom Guided
Angle Seats (Soft and Metal)
With Lift Lever Housing
Service Mil-Specs:
Mil-V-20065 (Steam), Mil-V-22549 (Air) and Mil-V-24332 (Liquid)
Sizes:
1/4”
Set Pressures:
5 to 6000 psi
Connections:
Flanged to ANSI B16.5 and Mil-F-20042.
Union Ended to Mil-F-1183 (400 psi), 803-1385946 (1500 psi),
803-1385943 (3000 psi), 803-1385990 (3000 psi) and
803-1385884 (6000 psi); Valves provided with or without
Socket Weld, Sil-Braze or Butt Weld union end tail pieces,
union nuts, o-rings and retaining rings
Materials:
Bronze, Stainless Steel, CuNi, Monel®, Carbon Steel
(other materials available upon request)
Navy Master Plan Drawings:
8000, 9000 and 20000 series SW, MH, NS series
Qualifications:
Shock (Mil-Std-901), Vibration (Mil-Std-167) and 1st article tested
and qualified
to 8”
Penberthy Liquid Level Monitoring
• Educators/Ejectors/Jet Pumps
• Liquid Level Gages/Valves
• Magnetic Liquid Level Gages
• Sight Flow Indicators and Sight Windows
• Capacitance/Ultrasonic Level Instrumentation
• Boiler Trim/Conductivity Probes/High Pressure Glass Gages
17
Yarway Liquid Level Monitoring
Type:
Mechanical, Magnetic, Electric
Design:
Gage, Probe Conductivity, Delta-P
Standard:
ASME
Technology:
Forged, Cast
Materials:
Carbon Steel, Alloy Steel, Stainless Steel
Pressure Class: 3000 psig max [207 barg max]
Steam Traps/Strainers
Yarway Pressure Steam Traps
Series 460D3 and 515D3 are designed with a removable capsule incorporating high
pressure disc trap technology. These traps are designed for a variety of high pressure
applications found in utility, industrial and marine service. Typical applications include
steam tracing, steam main drip and turbine drain. The small, lightweight design and
broad range of operating pressures are among the many advantages when
compared to mechanical traps of the same pressure rating. In addition, the quick
change capsule design is renewable in-line with factory assembled internals without
the need to disturb the piping.
Crosby Wye Strainers
Shock and Vibration Qualified
Sizes:
1/4”
Pressures:
to 1200 WOG
Connections:
Flanged, Socket Weld, Sil-Braze (with blowdown connection
cap or blank cap)
Materials:
CuNi, Monel®, Stainless Steel, NiAlBriz
to 3”
2” to 40” ABS approved
18
Tyco Valves & Controls incorporates many market-leading brand
names in the manufacture of valves, actuators and control systems,
including...
F Anderson Greenwood - Pressure relief valves
F Anderson Greenwood Instrumentation - Hand valves, gauge valves,
manifolds
F AVID - Position, control and network monitors, electro-pneumatic and
smart positioners
F Biffi - Gas, electric and pneumatic quarter-turn and multi-turn actuators
F Crosby - Pressure relief valves and specialty products
F Fasani - Gate, globe and check valves
F Gimpel - Steam valves
F Gulf - Double-door wafer check
F Keystone - Resilient seated and high-performance butterfly valves
F KTM - Ball valves
F MCF - Three-piece ball valves
F Morin - Spring return and double acting quarter-turn actuators
F Nu-Torque - Navy and Marine acutators
F Penberthy - Liquid level monitoring
F Prince - Wafer swing check
F Vanessa - Zero leakage, critical service valves
F Winn - High-performance butterfly valves
F Yarway - Valves, instruments and steam trap
Flow Control
Tyco Valves & Controls - Marine
1467 Elmwood Avenue
Cranston, RI 02910
Toll Free: 866-832-9706
Telephone: 401-330-1100
Fax: 401-781-7653
www.tyconavymarine.com
www.tycovalves.com
Tyco Flow Control (TFC) provides the information herein in good faith but makes no representation as to its comprehensiveness or accuracy. This overview is intended only as a guide to TFC products
and services. Individuals using this overview must exercise their independent judgment in evaluating product selection and determining product appropriateness for their particular purpose and system
requirements. TFC MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE INFORMATION SET FORTH HEREIN OR THE PRODUCT(S) TO WHICH THE INFORMATION REFERS. ACCORDINGLY, TFC WILL
NOT BE RESPONSIBLE FOR DAMAGES (OF ANY KIND OR NATURE, INCLUDING INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES) RESULTING FROM THE USE OF OR RELIANCE
UPON THIS INFORMATION. Patents and Patents Pending in the U.S. and foreign countries. Tyco reserves the right to change product designs and specifications without notice.
TVCMC-0270 / Printed in USA / 2.5M / 0509