1. No category

Poly • Inductor • Containment Tanks
E0403
Inductor Systems
15, 30, 85
& 110 Gallon
D
Polyethylene Mix-N-Fil Chemical Inductor Tank
has a 12" Fill Opening, 2" FPT Bottom Outlet. 15,
30 and 55 gallon tanks have molded in gallonage
marks in 1/2 gallon increments while the 85 gallon
is marked in 5 gallon increments.
Chemicals are added to the liquid as it flows
through the suction line.
15, 30 & 85 Gallon Inductor Tanks
feature Banjo polyethylene flange
fittings. Includes a water flush and
jug rinse hose with 12" fill lid, 2” or
3” manifold system. Unit is plumbed
with bypass loop for induction control.
Note: Unit is shipped assembled
as shown.
1A30
Part No.
DU 1A15
DU 1A15A
DU 1A30
DU 1A30A
DU 1A85
DU 1A85A
DU 1A110A
MIX-N-FIL
Tank Chemical Inductors
Fitting
Package
(sold separately)
Use Only on Suction
Side of Pump
Description
Wt.
Net Ea.
15 Gallon Inductor with 2” Manifold System 35 lbs.$ 693.00
15 Gallon Inductor with 3” Manifold System 35 lbs. 867.00
30 Gallon Inductor with 2” Manifold System 65 lbs. 718.00
30 Gallon Inductor with 3” Manifold System 70 lbs. 892.00
85 Gallon Inductor with 2” Manifold System 100 lbs. 826.00
85 Gallon Inductor with 3” Manifold System 105 lbs. 996.00
110 Gallon Inductor with 3” Manifold System
- 954.00
Part No.
RT 15T
RT 15ST
RT 30T
RT 60T
RT 30ST
RT 85T
RT 110T
RT 85ST
35 & 60 Gallon Full Drain
Blow Molded Inductor Tanks
Features: Tanks and legs constructed
of blow-molded polyethylene with UV
stabilizers for economy and strength •
Stainless fasteners • 2” FPT full drain
outlets (with stainless hose clamp for
extra strength) • Gallon/Liter indicators
on one side • 12” Non-vented lid
assembly with lanyard • Rated to 14
lb./gal. Liquids • Stationary or mobile
applications. 12695 Leg Anchor
Kit available at additional cost (not
included).
Part No.
RT IB35
RT IB60
RT 12695
DU MF200
DU FM200A
RT 10508
RT 10113
RT 12003
D
MF200
D
MIX-N-FILLTanks & Stands
Dia. X Ht.
15 Gallon Inductor Tank.............. 19" x 24"
Stand for 15 Gal. Inductor Tank... 19” x 29”
30 Gallon Inductor Tank.............. 24" x 27"
55 Gallon Inductor Tank.............. 24" x 43"
Stand for 30 or 55 Gal. Inductor Tank. 24” x 33”
* 85 Gallon Inductor Tank............ 30" x 43"
110 Gallon Inductor Tank............ 51" x 30"
* Stand for 85 & 110 Gal. Inductor Tank 30” x 36”
Net Ea.
$ 67.00
62.25
86.35
113.00
66.10
159.50
187.50
118.00
2" Threaded Fitting Pkg................................................ 42.25
2" Flanged Connection Fitting Package....................... 96.50
2” Polypro. Replacement Fitting (Includes Santoprene Gasket) 7.02
2” Santoprene Gasket................................................... 1.80
2” Viton® Gasket.......................................................... 18.75
*85 Gal. tank & stand styles changed in 2004. Prior year models will not fit new styles.
D
Inductor Units for Mix-N-Fil Tanks
No. 12695
Leg Anchor Kit
Draws wettable
powders or
liquids from
inductor tank
for thorough
chemical mixing!
No. 1B60
Description
Dimensions
35 Gallon Inductor Tank with Legs 24.5” x 24.5” x 43”
60 Gallon Inductor Tank with Legs 24.5” x 24.5” x 55”
Replacement Stainless Leg Anchor Kit
-
Net Ea.
$147.00
170.50
27.25
Part No.
TK MIS220A
TK MIS300A
Net Ea.
2” Full Port Manifold Inductor System.........$ 320.10
3” Full Port Manifold Inductor System......... 488.50
Cleanload™ Chemical Eductors
For Safe Loading of Chemicals into Spray Tanks
FEATURES:
• Self-Contained Eduction System, which allows the use of one system to mix liquid and dry chemicals.
D
• 7.0 Gallon tank features a wide 16” lid, holds a full 51 lb. bag of dry material, and can be used to rinse larger 5.2 gallon jugs.
• Educts 7 gallons of liquid in 10 seconds and a 51 lb. bag of AMS in 30 seconds.
• CycloRinse™ System provides premium cleaning & meltdown of flowable powders with lid open for continuous fill operation.
• Available in (3) Nozzle sizes designed for transfer pump, on-board sprayer and low flow roller/diaphragm applications.
• Polypropylene Eductor features 220 universal flange ports and is available in either
left-hand or right-hand flow configurations (Right-hand flow is illustrated. Left-hand
models available).
• Extends the life of transfer pumps by educting abrasive and corrosive chemicals downstream.
• Bottle Rinse is included.
Applications: Low Flow Roller/Diaphragm Pump
High Pressure - Low Flow
Cleanload #’s
3376-0870
On-Board Sprayer Pump:
High Pressure - High Flow
Transfer Pump:
Low Pressure - High Flow
3376-1170
3376-1670
Inlet
Req’d
Eduction Max. Outlet Req’d
Eduction Max. Outlet Req’d
Eduction Max. Outlet
PressureFlow RatePressure
Flow RatePressureFlow RatePressure
PSI GPMGPM PSIGPMGPM PSI GPMGPM PSI
30
40
50
60
70
80
90
100
Snap-in
attachment for
remote loading
of bulk chemical
container.
16.131.5 5.233.552.2 9.2 73.561.216.9
19.147.0 6.638.064.4 12.382.967.222.4
21.454.5 8.141.372.6 15.390.368.327.8
23.361.5 9.744.477.7 18.296.266.833.1
24.9 68.0 11.247.580.5 21.1101.365.1 38.4
26.4 74.1 12.750.982.1 23.9 -
-
28.0 79.7 14.253.983.3 26.6 -
-
29.7 84.8 15.856.685.0 29.3 -
-
-
Part No.
HY 3376-0870
HY 3376-1170
HY 3376-1670
HY 3430-0823
Description
Wt.
Net Ea.
CLEANLOAD™ High Pressure, Low Flow, Right Hand.... 40 lbs. $ 536.00
CLEANLOAD™ High Pressure, High Flow, Right Hand... 40 lbs.
536.00
CLEANLOAD™ Low Pressure, High Flow, Right Hand.... 40 lbs.
536.00
Suction Lance..................................................................................... 137.00
3430-0823
Suction
Lance
3430-0823
Suction Lance
Part Number
Application
Description
Nozzle Size
HY 3376-0870 Low Flow Roller/Diaph. Pump High Pressure/Low Flow
08
HY 3376-1170
On-Board Sprayer Pump
High Pressure/High Flow
11
HY 3376-1670
Transfer Pump
Low Pressure/High Flow
16
Viton® is a registered trademark of DuPont Performance Elastomers
DULTMEIER SALES • OMAHA, NE
(800) 228-9666
•
www.dultmeier.com
• DAVENPORT, IA
(800) 553-6975
E0403