Bale Wrappers with e-Twin Pre-Stretcher RW 1410 and RW 1610 Product Information www.KuhnNorthAmerica.com The new generation Kuhn RW 1410 and RW 1610 trailed turntable bale wrappers with e-Twin pre-stretcher provide you with fast, cost-efficient wrapping. The unique e-Twin pre-stretcher has patented features that can reduce wrapping time by 50% by applying two layers of film to the bale at the same time instead of the traditional single layer. We have also increased the pre-stretch ratio from the traditional 70% all the way up to 90%, reducing the overall amount of plastic applied to the bale. As a result of these changes, the new generation Kuhn RW 1410 and RW 1610 wrappers with the e-Twin pre-stretcher saves you film, labor and fuel costs. e-Twin Principle Patented Film Distribution Wrapping controls 1. Reduce your wrapping time by 50%. 2. A n increase to a 90% pre-stretch ratio is possible due to the unique, patented film distribution design. This allows Kuhn e-Twin wrappers to use less plastic per bale. Two film layers are glued together into one thick layer before coming out of the pre-stretcher. Unique advantages: 1. Extreme tear resistance in all conditions 2. P re-stretch ratio can be increased to 90% providing tightly wrapped bales and exceptional film savings 3. Eliminates the need for a film break sensor Available on: RW 1410 M (Manual) RW 1410 C (Computer) RW 1610 M (Manual) RW 1610 C with AUTOLOAD Wrapping with a single film layer is still possible for small diameter bales 39”–47” (<1.2 m) and in cases where only one film roll is available. Technical Specifications Bale Wrappers Bale Size (Width x Diameter) Maximum Bale Weight Machine Length Machine Transport Width Machine Height Drawbar Loading System Ability to Carry a 2nd Bale on Loading Arm Wrapping Table Bale Support Roller Control Semi-Auto Operation of (M) Version by Bale and Wrap Counter and Auto Table Stop Radio Frequency Remote Control Automatic Loading Function (AUTOLOAD) Fully Automatic Film Cutter Pre-Stretch Ratio e-Twin Film Roll Magazine Minimum Tractor Hydraulic Requirement Oil Flow and Pressure Required Road Lights Wheel Sizes Machine Weight RW 1410 C RW 1610 M RW 1610 C 47 x 40 – 60 (120 x 100 – 150) 2,200 lbs/1,000 kg 2,400 lbs/1,100 kg (Optional 2,650 lbs/1,200 kg) 165“/420 cm 179“/455 cm 96“/245 cm 106“/269 cm 90“/228 cm 102“/258 cm Fixed Clevis Loading Arm – Standard 4 Belts and 2 Rollers 2–Adjustable Manual 3-Lever/ Manual 3-Lever/ Computer Controlled Computer Controlled Cable Controlled Cable Controlled Standard – Standard – – Optional – – Optional Standard Standard 90% Standard (70% Included) – 1 Magazine for 2 Rolls of Stretch Film Standard 1 Single-Acting with Free Return or 1 Double-Acting 7 gal/min at 2,200 PSI (26 l/min at 150 bar) – Standard 10.0/80-12 15.0/55-17 1,929 lbs/875 kg 3,285 lbs/1,490 kg KUHN NORTH AMERICA, INC. Corporate Headquarters 1501 West Seventh Avenue - Brodhead, WI 53520 Phone: (608) 897-2131 Fax: (608) 897-2561 www.kuhn.com www.KuhnNorthAmerica.com Our machines comply with the North American safety regulations. In our leaflets, to better illustrate certain details of the machines some safety devices could have been removed. Conforming to the assembly and operator’s manual, in no circumstances must machine be operated without these safety devices in place. All machines are equipped with safety devices which comply with the regulations of the countries in which they are delivered. In the interest of progress, we reserve the right to change without notice any specifications, design or materials listed. Patents filed in several countries. Find us on Printed in USA 706421US 0114 Copyright 2014 Kuhn North America, Inc. RW 1410 M
© Copyright 2024