SoleCity

SoleCity
Small LED Street and Area Luminaire
Data Sheet
A
2½" (64mm)
4½" (114mm)
36 5/8'' (930mm)
ULS100
Conform to the UL 1598 and CSA C22.2 No. 250.0-08 standards
Suitable for operation in an ambient temperature up to 40oC / 104oF - UL certified
(Runs cool in almost every climate).
*Depending on Luminaire configuration.
47'' (1194mm)
A / 2 modules = 73'' (1854mm)
A / 3 modules = 83'' (2018mm)
57 5/8'' (1464mm)
A / 4 modules = 94'' (2388mm)
A / 5 modules = 104'' (2642mm)
68'' (1727mm)
Bolt circle Bolt circle
11 1/2”
11 1/2”
(292 mm) (292 mm)
(330 mm)
13"
Wireway 7 1/8”
Wireway
(181 mm)
7 1/8” (181 mm)
13"
12"
Steel Pole
Comes with 4 anchor bolts
1’’x36’’ (25 x 914 mm),
8 nuts and 8 washers.
Bolt circle Bolt circle
B.C. from: 11‘‘ to 13‘‘
11 1/2”
11 1/2”
(279 to 330 mm)
(292 mm) (292 mm)
(305 mm)
12"
(305 mm)
Wireway 7 1/2"(191
Wireway mm)
7 1/2"(191 mm)
Comes with 4 anchor bolts
1’’x36’’ (25 x 914 mm),
8 nuts and 8 washers.
B.C. from: 11‘‘ to 12‘‘
(279 to 305 mm)
(330 mm)
Aluminum Pole
LED Lamp Details
LED = Philips Lumileds Rebel R, CRI = 70, CCT = 4000K (+/- 350K)
System (LED + driver) rated life = 100,000 hrs1
Lamp
Typical
delivered
lumens2
Typical
lamp
wattage
(W)
Typical
system
wattage3
(W)
Typical
current
@
120 V
(A)
Typical
current
@
240 V
(A)
Typical
current
@
277 V
(A)
LED
current
(mA)
HPS
equivalent4
Luminaire Efficacy
Rating (Lm/W)
35W32LED4K-R
35W32LED4K-R5
3200
35
45
0.38
0.19
0.16
350
70 W
90
55W32LED4K-R
55W32LED4K-R5
4610
54
70
0.58
0.29
0.25
530
70 W
84
90
55W48LED4K-R
4800
54
65
0.54
0.27
0.23
350
100 W
80W48LED4K-R
6920
81
101
0.84
0.42
0.36
530
100 W
84
70W64LED4K-R
6410
72
86
0.72
0.36
0.31
350
100 W
90
110W64LED4K-R
9230
108
135
1.13
0.56
0.49
530
150 W
84
90W80LED4K-R
8010
90
95
0.79
0.40
0.34
350
100 W
90
135W80LED4K-R
11540
135
138
1.15
0.58
0.50
530
200 W
84
1 L70 = 100,000 hrs (at ambient temperature = 25°C and forward current = 700 mA).
2 May vary depending on the optical distribution used.
3 System wattage includes the lamp and the LED driver.
17"Ø
432mm
1
SoleCity / Small LED Street and Area Luminaire
4 Compared to Capella (equivalence should always be confirmed by a photometric layout).
5 Not available with 347 and 480 volts.
Optical System
Composed of high performance acrylic refractors lenses
to achieve desired distribution, optimized to get maximum
spacing, target lumen and a perfect lighting uniformity.
Performance shall be tested per LM63 and LM79 and
TM15 (IESNA) certifying its photometric performance.
The system is rated IP66.
Voltages
LE2:Asymetrical
LE3:Asymetrical
LE4:Asymetrical
120 / 208 / 240 / 277 / 3471 / 4801
1 Not available with driver options
* Photometry available on Philips Lumec web site www.philips.com/lumec.
Luminaire Options
Pole Options
PH8
ULFL100ULR100
Photoelectric cell
Complete with a decorative cap
Allows a 90o rotation
RC
Receptacle for
photoelectric cell
/ MPL (Mid Pole Luminaire)
LED Flood Light
LED Mid-pole Light
Luminaire Lighting Controls
SoleCity allows you many options in order to get different smart functionalities.
DMG
CDMG
CDMGP
OVR
Driver is compatible with dimmer from 0 to 10 volts.
Dynadimmer standard dimming functionalities including pre-programmed scenarios to suit
many applications and needs from safety to maximum energy savings.
Dynadimmer custom dimming scenario allowing the user to program up to 5 time periods
and multiple dimming levels from 100% to 10% of total wattage.
Dynadimmer override function offering the possibility to go back to full power at any time via
an electrical signal of 120VAC to 277VAC from a motion sensor, a switch, a relay or else.
CLO
Pre-set driver to manage the lumen depreciation by adjusting the power given to the LEDs
offering the same lighting intensity during the entire lifespan of the lamp.
AST
Pre-set driver for progressive start-up of the lamp to optimize energy management and
enhance user visual comfort at start-up.
OTL
DALI
Pre-set driver to signal end of life of the lamp for better fixture management.
Pre-set driver compatible with the DALI control system.
System Lighting Controls
Different options are available according to your needs. Please contact us for more information.
City Lighting Controls
AMPLIGHT
Amplight is the intelligent monitoring and control, automated management system that
delivers up to 35% streetlight energy savings and makes it easy to monitor and manage
the entire system, in real time. Please contact us for more information.
Other options are also available according to your needs. Please contact us for more information.
2
SoleCity / Small LED Street and Area Luminaire
Finish
GR
WHTX
BKTX
GY3TX
BRTX
BG2TX
BE2TX
BE6TX
BE8TX
GNTX
GN4TX
GN6TX
GN8TX
RD2TX
RD4TX
TS
TG
NP
Gray Sandtex
Textured White
Textured Black
Textured Medium Grey
Textured Bronze
Textured Sandstone
Textured Midnight Blue
Textured Ocean Blue
Textured Royal Blue
Textured Green
Textured Blue Green
Textured Forest Green
Textured Dark Forest Green
Textured Burgundy
Textured Scarlet
Hammertone Silver
Hammertone Gold
Natural Aluminum
Ordering Example
Luminaire
Lamp
Optical
System
Voltage
Driver
Options
Luminaire
Options
Bracket
Pole
Finish
ULS100
105W80LED4K-R
LE3
120
DMG
PH8
UBS100-1A
UPS100-12
BKTX
Assembly Example
20’
18’
16’
14’
LED Mid-Pole Light
(optional)
ULR100
10’
8’
20'-0" (6096mm)
12’
2’
8'-0" (2438mm)
4’
12'-0" (3658mm)
6’
0’
Small LED Street and Area
Luminaire 16’
Luminaire: ULS100
Bracket: UBS100-1A
Pole: UPS100
3
17"Ø (432mm)
SoleCity / Small LED Street and Area Luminaire
Small LED Street and Area
Luminaire 20’
Luminaire: ULS100
Bracket: UBS100-2
Pole: UPS100S
www.philips.com/lumec
PHILIPS LUMEC HEAD OFFICE
ONTARIO OFFICE
640, Curé-Boivin Boulevard
Boisbriand, Québec
Canada J7G 2A7
189 Bullock Drive
Markham, Ontario
Canada L3P 1W4
T: 450.430.7040
F: 450.430.1453
T: 416.223.7255
F: 866.971.2825
For the details of our different agents and representatives, please consult the Contact us section
of our Website.
© 2012 Philips Group.
All rights reserved. We reserve the right to change details of design, materials and finishes.