Capri Travertini
Range
Achieve the breath-taking look of Travertine with
the low maintenance of porcelain
Floor tiles in the image:
Capri Travertini Beige 600x600mm
Capri Travertini
The Capri Travertini range presents itself as a straight cut filled and polished travertine and it does this
convincingly. Through the use of the latest digital ink jet printing it has been possible to produce a tile that is
so close to the original stone that it is near impossible to tell them apart.
The range requires little more than an open space to shine. Feature tiles and accessories are not needed to
dress this product up, it is best left to speak for itself.
As shown in the images below, this product can be utilised in a commercial or domestic setting. Whatever
the environment it will certainly bring a touch of formality and refinement to any internal space.
Tiles in the image:
Capri Travertini Beige 600x600mm
Tiles in this image:
Capri Travertini Grigio Lapparto 600x600mm
Tiles in this image:
Capri Travertini Grigio Lapparto 600x600mm
This product is also environmentally friendly, not only are you protecting the environment from mining but
the production method for this product utilizes 40% recycled materials and is certified by the Green Build
Council Italia.
Technical Data:
TECHNICAL FEATURES GLAZED FINE PORCELAIN STONEWARE - ISO 13006 BIa GL
Product Characteristic
According to standard
Standard requirements / Mean Value
Length and width (admitted tolerance from factory size) /
Dimensions
Length and width (admitted tolerance from average size
of 10 samples)
+ 0,5% max
ISO 10545 - 2
Length and width W
± 0,6% max
Thickness
+ 5%
Straightness of sides
+ 0,5%
Orthogonality in %
+ 0,6%
ISO 10545-2
ASTM C 485
Flatness
Bending strength
Modulus of rupture
Breaking of rupture
ISO 10545 - 4
+ 0,5% max
Warpage diagonal/edge ± 0,4%
R > 35 N/mm2
S >1300 N
Water absorption
ISO 10545 - 3
E < 0,5%
Frost resistance
ISO 10545 - 12
Resistant
Resistance to thermal shock
ISO 10545 - 9
Resistance
Linear thermal expansion coefficient (50°/400°)
ISO 10545 - 8
Test method available
Crazing resistance of glazed tiles
ISO 10545 - 11
Resistant
Scratch hardness (MOHS scale)
EN 101
MOHS 6
Resistance to surface abrasion of glazed tiles
ISO 10545 - 7
Class 4
Resistance to house hold chemicals
Resistance to low concentrations of acids and bases
Resistance to staining of glazed tiles
Anti-slip properties
Colour shading (degree of colour variation)
ISO 10545 - 13
Class GA
Class GLA
ISO 10545 - 14
Class 5
DIN 51130
R9
B.C.R.A. REP. CEC. 6/8
nat .rett 0,40 ≤ ≤ 0,74
ASTM C 1028
nat .rett DRY: > 0,70 - WET: > 0,60 lapp-rett DRY: > 0,60 - WET:
> 0,5
DCOF (no lapp)
≤ 0,42
V2 - Light to moderate shade and texture variation within each carton.
Test carried out on: 30x60 cm (12”x24”) lapp-rett
•
•
•
TECHNICAL NOTES & INSTALLATION GUIDE
All sizes are nominal. The use of abrasive for cleaning decorated tiles is absolutely forbidden. The manufacture reserves the right to modify
the information and the characteristics illustrated in this catalogue (which are in any case not legally binding) at any moment. The colours and
appearance features of the products are as close as possible to reality, within the limitation of the printing process.
Place the product on the floor to check the overall effect. Lay the material carefully checking the colour, work size and sorting class.
In the lay-out is advisable to leave at least 1-2 mm - ”1/16-”2/16 joint between each tile and fill with grout of the same colour as the tile.
The best end results are achieved by laying the tiles staggered by one third of the length.
We suggest to lay large sizes with “levelling spacers” like
the Siri’s Levelling System.
When laying, you are recommended not to stagger the
strips by more than 25% of the length.
Basic Specifications
Glazed porcelain
Beige
Grigio
Size 600x600mm (please note:
sizes are nominal)
Floor & wall application
Lapparto finish
Rectified edge
Lifetime guarantee*
Made in Italy
V rating V2
Size 600x600mm
National Tiles Co Pty Ltd
nationaltiles.com.au
Available in lapparto finish
Slip resistance - wet pendulum test
lapparto finish - R9
*Terms and conditions apply.