‫رشکت جتهزیات بنت خاورمیانه‬ ۰۹۲-۹۸۹۰۰۲۶۲ : ‫ فکس‬۰۹۲-۹۸۹۰۰۲۶۲ :‫تلفن‬ ALCCOFINE 1101 - MF Product Features ALCCOFINE 1101-MF is a specialty ultrafine product used in special kind of applications demanding high performance such as soil stabilization & rock anchoring etc. It is a Microfine Material with Particle Size much finer than other microfine hydraulic setting materials/ hydraulic setting materials like cement. It is produced in a controlled environment with special equipments to achieve specifically designed particle size distribution (PSD) of the material which gives it the unique properties. ALCCOFINE 1101-MF has an average particle size less than 9 microns. The average Blaine value is around 6000cm2/gm. Due to its high fineness, the product has extremely good retention when used for purpose of grouting either micro-cracks in concrete or rocks or voids in soil. Its permeation characteristics when used with recommended admixtures are comparable to chemical grouts such as silicates and acrylamides, but pose no problem of toxicity to the environment. This gives us the added advantage of being environment friendly. Technical Details: Physical Properties Fineness cm2/gm Specific Gravity 6000 3.1 Bulk Density (kg/m3) 700-800 Particle Size Distribution (um) d50 d95 <9 < 22 Chemical Properties IR (max) 4.0% MgO SO3 LOI (max) (max) (max) 6.0% 3.0% 5.0% Cl (max) 0.05% Marsh Cone Flow At 1: 1 water / ALCCOFINE 1101-MF ratio (by weight) at standard temperature 27 ± 2 degree Celsius with 2% Power flow 2230 admixture. Marsh Cone Flow 27 – 38 sec www.Beton-co.ir :‫وبسایت‬ [email protected] : ‫امییل‬ ۹۲ ‫ واحد‬۹۲ ‫ پالک‬- ‫ خیاابن بیدار‬- ‫ خیاابن فرش ته‬- ‫ هتران‬: ‫آدرس‬ ‫رشکت جتهزیات بنت خاورمیانه‬ ۰۹۲-۹۸۹۰۰۲۶۲ : ‫ فکس‬۰۹۲-۹۸۹۰۰۲۶۲ :‫تلفن‬ Setting Time At 1 : 1 water / ALCCOFINE 1101-MF ratio ( by weight ) at standard temperature 27±2 degree Celsius. Initial Setting Time (min) Final Setting Time (max) 1 hrs 10 hrs Product Application     Rock Injection – Pre injection, post injection, rock stabilization and curtain grouting. Soil Injection – Stabilization, water tightening & control of ground water. Grouting of Anchors – In rock & soil. Injection of cracks in concrete structures Procedure for Application kugjhgjhg ALCCOFINE 1101-MF should always be used with suitable water reducing admixtures* (1 to 3% by wt). Water / ALCCOFINE 1101-MF ratio (by weight) should normally range between 0.5 – 1.0 depending on the flow & pressure requirement at the end application. *Recommend admixture: Mc Bauchemie make – Powerflow 2230. Mixing and Use: It is important to employ efficient mixing equipments while using ALCCOFINE 1101-MF. Colloidal mixers or high speed paddle mixers are recommended for efficient mixing. Minimum speed of colloidal mixer should be 1500 rpm and that of paddle mixer is about 400 rpm. Over mixing should be restricted, to avoid air entrapment & bubbles formation. High pressure piston pump are recommended for mix transfer & injection, which should be completed within 45 minutes after mix preparation. Packaging and Shelf Life Standard Packing of ALCCOFINE 1101-MF is in 25 kgs bags.ALCCOFINE 1101-MF has a shelf life of 6 months when stored in a sealed original micro laminated HDPE bags from manufacturer in covered well ventilated dry / wooden floor area www.Beton-co.ir :‫وبسایت‬ [email protected] : ‫امییل‬ ۹۲ ‫ واحد‬۹۲ ‫ پالک‬- ‫ خیاابن بیدار‬- ‫ خیاابن فرش ته‬- ‫ هتران‬: ‫آدرس‬