MID/MIL CIGAR MAKING MACHINE MID/MIL CIGAR MAKING MACHINE The MID/MIL is an overrolling machine feeder of the machine. The JL-feeder glue is added through a stretching plate that overrolls a natural wrapper around separates and presents the bunches one or optional the AGS gluing system. a bunch with homogenized binder. The by one. A long gripper arm picks a bunch After overrolling, a small gripper arm machine is easy to maintain and has out of the JL feeder, and puts it into the takes the cigar out of the rolling device standard ceramic bearings in the stainless stainless steel rolling device. An operator and places it onto a discharge system. The steel rolling device, that ensures a long cuts the wrapper out of a tobacco leaf type of discharge system depends on the operating life. The machine is suited for on the machine. The leaf carrier takes a next step in the production process. To one cigar model but can be converted to wrapper and carries it to the rolling device, achieve an optimal speed and reliability another model by changing format parts. were it is wrapped around the bunch in a of the machine, all main movements Premade bunches are put into the JL- spiral wise way. Just before overrolling, are Options Technical specifications • AGS (ATD Gluing System) • Speed: 14-24 cigars / minute Special gluing system for improved cigar quality • Machine dimensions: 190 x 158 x 140 cm (L x W x H) • Format parts • Machine weight: 1200 kg For each cigar format, format parts • Power consumption: 2.9 kW can be produced • Compressed air: 6 bar / 60 ltr./min. • Cigar dimensions*: Diameter: Min. Ø 7,2 mm Max. Ø 17 mm L ength: Min. 70 mm Max. 240 mm *Other dimensions on request ATD Machinery B.V. Smaragdweg 30 5527 LB Hapert The Netherlands [email protected] www.atdmachinery.nl mechanically driven by cams.
© Copyright 2024