Training program 2015 Elevator
Lift hydraulics - from theory to practice Training program 2015 Elevator Lift hydraulics From theory to practice Welcome to Bucher Hydraulics "The iValve wins through! " The new-generation iValve lift control valve is gaining recognition: already, more than 5000 systems have been installed, covering more than 150 customers. Many customers have switched to the iValve because of these decisive advantages: •Installation time reduced by 70 % •Energy savings of 30 % •First-class travel characteristics and built-in A3 safety valve •Integral pressure switch, hand pump and emergency-lowering facility New course in the training program The newly developed course 'The new-generation iValve' (Course 200) gives your technicians all the applicationinformation – the theory as well as the practice – they need for new installations, service and maintenance. Using our mobile training unit, trainees can get hands-on practice and experience the effects 'live'. Again and again, customers confirm that our training courses make a direct contribution to image gains and cost savings. As a result, some customers have already sent their staff to our courses several times. Contact us directly about training courses on your own premises. Jimmy Gehrig, Head of After Sales Service – Elevator Overview Which courses are available? Course 200: The new valve generation type iValve Course 300: Electronically controlled lift valve type LRV-1 Course 400: Frequency drive solutions with and without hydraulic counterweight Course 500: Lift cylinders correctly fitted, maintained and repaired other courses on request A look at our training infrastructure The new valve generation type iValve – Course 200 Goals • Understanding functionality of the valve • Problem recognition, solution and improvements on site • Modernisiation with iValve Content • Mechanical and hydraulic performance • Electrical perfomance • Basic settings, parameter overview using handterminal and software – iWin • Tips and tricks for settings in theory and pratice • Requirements for controller • Notes for maintenance and service • Modernisiation possibilities – MULTIKIT iValve Target group • Attendance- and service technician • New system technician • Final inspection technician and testing engineer • Service manager / Technical supervisor •Trouble-Shooter Participants • max. 8 participants per course Dates • on request Electronically controlled lift valve type LRV-1 – Course 300 Goals • Understanding functionality of the valve • Problem recognition, solution and improvements on site Content • Mechanical and hydraulic performance • Electrical perfomance • Basic settings, parameter overview using handterminal and software – WinDelta • Tips and tricks for settings in theory and pratice • Notes for maintenance and service • Modernisiation possibilities – MULTIKIT iValve Target group • Attendance- and service technician • New system technician • Final inspection technician and testing engineer • Service manager / Technical supervisor •Trouble-Shooter Participants • max. 8 participants per course Dates • on request Frequency system with and without hydraulic counterweight – Course 400 Goals • Understanding the funcitonality of the frequency technology • Recognising and understanding the advantages compared to the standard hydraulic • Problem recognition, solution and improvement on existing installations Content (based on course 200 and 300) • Mechanical and hydraulic function with and without hydraulic counterweight • Comparison of frequency converter mechanism against standard power unit • Electrical function incl. frequency inverter • Basic settings, parameter overview with help from hand terminal and software WinDelta • Tips and tricks for settings in theory and praxis • notes for attendance and service • Modernisation possibilities Target group • Attendance- and service technician • New system technician • Final inspection technician and testing engineer • Service manager / Technical supervisor •Trouble-Shooter Participants • max. 8 participants per course Dates • on request Lift cylinders correctly fitted, maintained and repaired – Course 500 Goals • Understanding the functionality of the different types of cylinders (Plunger, Tele, Pulling) incl. pipe rupture valve • Correct installation and commissioning • Problem recognition, correct repair Content • Mechanical and hydraulic function • Installation instructions • Resolving problems caused by dry running conditions, sticklip effect, noise emission • Tips and tricks for seal kit change • Notes for maintenance and service • Function and testing of the pipe rupture valve Target group • Attendance- and service technician • New system technician • Final inspection technician and testing engineer • Service manager / Technical supervisor •Trouble-Shooter Participants • max. 8 participants per course Dates • on request Which consultants are supporting you? Heinrich Uhe Function: Service and training manager Germany Course: all Patrick Furrer Function: Service technician Switzerland / worldwide Course: all José Guiot Function: Area Sales Manager, Specialist for frequency inverter technics Course: all Alejandro Gil Function: Technical Assistant Course: 200 / 300 / 400 Daniel Paljuca Function: Technical Assistant Course: 200 / 300 Alan Rolley Function: UK Technical Support and Service Manager Course: all (UK) What costs will be charged? Training at Bucher Hydraulics AG in Neuheim, Switzerland • CHF 360.- / € 340.- / £ 250 excl. VAT per person per day. Excludes travel and accommodation costs. Accommodation can be arranged by Bucher Hydraulics AG on request. Catering during training by Bucher Hydraulics AG Training at the customer • on request Attendance pack contains • Training documentation • Catering during training times • Training attendance certificate Training duration • Every course takes 1 day In which language is the training conducted? • The training can be conducted in English, German or French. Focus on hands-on training Training using our Training Vehicle (trailer) We attach great importance to the practical sessions. Thanks to our Training Vehicle you have the chance to take matters into your own hands after the theoretical part. We offer you the challenge to set parameters on our lift simulator and learn about their influence. Practice what you have just learned and improve the implementation with the help of our expert! The Training Vehicle at your site If you plan to train your personnel in house, the Training Vehicle can come to you. Only 3 parking spaces, 5 m free height (for the lift-cylinder simulator) and a 3-phase 16 A power connection (400 V) is necessary. Registration information How to sign up? Please fill out the registration form on our website www.bucherhydraulics.com/training and send it back to us: •E-mail: [email protected] •Fax: +41 41 757 03 19 •Phone: +41 41 757 03 40 The costs have to be paid 3 weeks before the training starts. Are there other training courses? On demand we are happy to run other customised training. Please contact us to discuss your requirements. Cancellation by participants A personal cancellation of a participant can be submitted in written form by e-mail or fax until 2 weeks before the event. Later cancellations can not be taken into account and the course fee will not be refunded. Travel directions for Neuheim based courses Bucher Hydraulics AG Industriestrasse 15 CH-6345 Neuheim Tel.: +41 41 757 03 33 www.bucherhydraulics.com l Zug Bern Luzern Genf Flughafen Airport Kloten A1 A1 ur > Schaffhausen Wi nte rth < Base Zürich > A51 Basel Zürich r Zü A4 e se ich A4a Verzweigung Blegi <B Ausfahrt Wädenswil Exit Wädenswil Baar ern Neuheim A3 Chur > Zug A2 A14 tth e Go se er g Zu Luzern ar d> A4 von/from Zürich Sihlbrugg von/from Wädenswil A4a Neuheim Ausfahrt Baar Exit Baar Baar zern von Lu Menzingen Zug By train By plane Travel to Baar with the From the Airport Zürich- Interregio. From Baar there is Kloten ZRH you ride via a Bus direct in front of our site Zürich to Zug or Baar. We will (Stop Sarbach). organise a pick-up service. We are looking forward to seeing you at one of our training sessions. For further information please do not hesitate to contact us. Bucher Hydraulics AG Industriestrasse 15 CH-6345 Neuheim Tel.: +41 41 757 03 33 Fax: +41 41 757 05 00 [email protected] www.bucherhydraulics.com © BUCHER HYDRAULICS AG 300-P-9000010-EN/01.2015 Subject to change without notice
© Copyright 2024