STEEL WELDMESH Fencing
handeproducts.com.au
Aluminium
Privacy Systems
Steel WeldmeshSlat
Fencing
The unique “V” Mesh Fencing range provides security, functionality & looks at an affordable price. Its
simple to install with purpose built fence bracket clips making panel fastening a breeze.
i
The Standard range is great
for use around the house as
dog fencing, keeping pets
inside your property and any
unwanteds out! It works well
with hedged greenery.
Suitable
Usage
• Garden Fencing
i
Our Boundary Fencing
range can be used on larger
properties or for commercial
use, securing your premises
with 1500mm, 1800mm &
2000mm high welded mesh.
Panel
Details
• Std Panel:
•Tape Measure
2200mm x 1200mm
•Stringline
• Dog Fencing
4mm Welded Wire
@ 50 x 100mm spacing
•Post Hole Shovel
• Industrial Fencing
• NOT POOL SAFE
The Hande Steel Welded
mesh panels and gates
are NOT designed to
comply with Australian
Pool Safety regulations
and should not be used
as Pool Fencing
• Boundary Panels:
2200mm x 1500mm
2200mm x 1800mm
2200mm x 2000mm
4mm Welded Wire
@ 50 x 200mm spacing
• Single Gates - w x h:
970mm x 1200mm
• Double Gates - w x h:
1475mm x 1200mm
•Cordless Battery Drill
•Hex Head Drill Bit (5/16)
•Spirit Level
•Soft End Mallet
•Concrete Mix
Available
Colours
• Standard panels have 2 “V” rows for strength
• Boundary panels have 3 or 4 “V”rows for strength
• 25 x 25mm gate frame
Customised gate sizes are
available on request. Using
our heavy duty 5mm wire
(100 x 200mm Grid), we can
manufacture custom security
gates to suit your needs.
Tools
Required
• Boundary Fencing
• Security Fencing
i
Satin Black Only
Handy
Hints
•Consult your local Council
before deciding on your
fencing requirements
•Check for all underground
services. Simply Dial 1100
for more information
•It’s best to allow at least
24 hours for posts to set in
concrete before installing
your panels/gates
•Panels & posts can be
easily cut down with a
hacksaw or grinder
•Remove all metal filings
and concrete splatter on
completion of installation
Materials Checklist & DIY Guide
D
B
A Panels
Panel Brackets
B
C Gate
C
A
E
D Gate Kit
Posts
E
illustration only
1
Site Plan &
Ordering
• Decide on fence
position and
measurements of
panels & posts by
creating a mud map
of your site.
• Following the above
Materials Checklist,
calculate how many
of each component
you require
• Contact your local
supplier to complete
your order
2
String Line
& Post Holes
• Set String line along
the desired line of the
fence, close to the
ground - this is the
bottom line of your
fence panels
• Measure out all
holes, starting with
the gate post holes
• Dig post holes along
string line 600mm
deep x 200mm in
diameter
• Posts should sit
approx. 500mm into
the post holes
3
Install
Posts
4
Tapered
Concrete
5
Install
Gate(s)
• Ensure post centres
are accurate (see
below diagram for
details)
• Attach panels to
posts using Panel
Brackets & Self
Tapping Tek Screws
• Attach hinge & latch
components of Gate
Kit to gate as per
instructions
• Ensure posts are
flush and level along
string line then pour
concrete around
posts up to 50mm
above ground level
and taper away from
post
• 2 Brackets at the top
• Attach hinge & latch
components of Gate
Kit to posts as per
instructions
• If you are using
flanged posts, fix with
appropriate concrete
or timber fixings
• 1 bracket at the
bottom
600mm
Install
Panels
• Posts can be cut level
with a hacksaw or
grinder and post caps
tapped on with a soft
end mallet
Jackaroo
Panel Span
Pedestrian
Gate Span
Double
Gate Span
2250mm
Post Centres
Post Centres
1050mm
3050mm
Post Centres
200mm
Care Instructions & Warranty:
Exposure to U.V. light, pollution, salt deposits and chemicals can affect the long term performance of the
fencing coating if not removed with regular washing.
A regular monthly clean with a soft brush, warm water and mild detergent followed by a rinse of fresh
water will maintain the finish of both powder coated, Colorbond® Steel and stainless steel fencing
components and fulfil warranty conditions.
Year nty
Warra
C on d it
p p ly
io n s A
Disclaimer: Drawings not to scale. While all care is taken in the production of this DIY (do it yourself) guide it is provided as an indicative installation guide only. The seller is not liable or responsible
for the outcome of any fence installed using this guide. © Copyright 2014. All rights are reserved in relation to this matter.
Product Order Form
STORE Name:
CUSTOMER ORDER #:
STORE Contact:
CUSTOMER NAME:
Address:
CUSTOMER Phone:
SUBURB:
PH: Post Code:
FAX:
MOBILE Phone:
CUSTOMER Email:
CHOOSE POWDER COATING ColoUR
Powder coating Colour:
SATIN BLACK ONLY
PANEL STYLE
CODE
PANEL DESCRIPTION
JA1200BL
Weldmesh PANEL - 2200 x 1200mm - BLACK
JA1500BL
Weldmesh PANEL - 2200 x 1500mm - BLACK
JA1800BL
Weldmesh PANEL - 2200 x 1800mm - BLACK
JA2000BL
Weldmesh PANEL - 2200 x 2000mm - BLACK
QTY
GATE STYLE
CODE
PANEL DESCRIPTION
JA1300BL
Weldmesh GATE - 970 x 1200mm - BLACK
JA1400BL
Weldmesh GATE - 1475 x 1200mm - BLACK
CUSTOM
Weldmesh GATE - Per Metre x 1200mm (High) - BLACK
CUSTOM
Weldmesh GATE - Per Metre x 1500mm (High) - BLACK
CUSTOM
Weldmesh GATE - Per Metre x 1800mm (High) - BLACK
CUSTOM
Weldmesh GATE - Per Metre x 2000mm (High) - BLACK
QTY
STEEL Posts
CODE
DESCRIPTION
JA5000BL
50 x 50 x 1800mm Weldmesh In Ground Steel Post (BLACK) - inc plastic cap
JA5100BL
50 x 50 x 2100mm Weldmesh In Ground Steel Post (BLACK) - inc plastic cap
JA5200BL
50 x 50 x 2400mm Weldmesh In Ground Steel Post (BLACK) - inc plastic cap
JA5300BL
50 x 50 x 2700mm Weldmesh In Ground Steel Post (BLACK) - inc plastic cap
QTY
PANEL ACCESSORIES
JA6100BL
Weldmesh Fence Brackets + Screws (6 Pack) - BLACK
JA6000BL
Weldmesh Fence Bracket (Each) - BLACK
HW5100BL
Hex Head Tek Screw - 12*14-20 (Each) - BLACK
GATE KIT & Accessories
CODE
GATE KIT TYPE
HW9902
T-Latch & Kwik Fit Self Closing Hinge Pack
HW2000
KwikFit Plain Hinges
HS8200BL
D-Latch & Striker - BLACK
HS8300BL
300mm Drop Bolt - BLACK
QTY